There are many factors to be considered when studying the lighting of industrial arts shops. Adequate light is one of the most important factors, and by adequate lighting is meant light that is sufficient in quantity and quality. Other factors to be considered include the location of the shops in the building, the windows, interior painting, width, and length, and the ceiling height of the shoprooms. The study herein is directed toward better lighting in the industrial arts shops for more efficient work.

This is a study of the opinions of industrial arts teachers(presently teaching in the Fort Worth Public Schools, Fort Worth, Texas) concerning factors affecting discipline in industrial arts laboratories.

The specific purposes of the study are: 1. To ascertain the curriculum pattern with respect to the different phases of industrial arts taught in all the junior high schools. 2. To ascertain the phases or unit and subject matter content taught in each of the junior high schools. 3. To ascertain the grade levels at which the various phases and units of learning are taught in each school. 4. To ascertain if there are variations in subject matter content taught in each of the junior high schools. 5. To make suggestions and recommendations based upon the findings of the study for improving organization and administration of the industrial arts program.

The purposes of this study are to evaluate the effectiveness of the training program at Arlington State College; to evaluate the curricula of the Semi-Professional Engineering Program at Arlington State College; and if needed, suggest improvements in the Semi-Professional Engineering curriculum at Arlington State College.

This is a study of the standards and current practices as related to housing facilities for industrial arts programs with recommendations concerning the proposed housing facilities for industrial arts in the Arlington Heights Senior High School, Fort Worth, Texas, based upon present and future estimated scholastic enrollment and accepted standards and practices.

This study was made to gather information and data to aid the administration of the Eagle Mountain-Saginaw School District in making a decision as to whether a vocational industrial education program was needed and if so what courses should be included.

The purpose of this study is threefold. First, numerical control will be analyzed objectively to ascertain its justification in terms of meeting the requirements of the basic manufacturing process phases. Secondly, the study will consist of an evaluation of the field of industrial arts in the Dallas-Fort Worth area to determine how numerical control has been accepted in the educational field and what preparation, if any, is being made to include the teaching of this new industrial concept. Thirdly, the study will investigate the feasibility and cost of installing numerically controlled equipment in the industrial arts laboratories of North Texas State University.

This study was designed to identify the knowledge and skills that welders employed in certain areas of manufacturing and fabrication in the Dallas-Fort Worth, Texas Metropolitan Area should possess.

The objective of this study is to determine what knowledge and skills are being required of machinists currently employed in the Dallas-Fort Worth area, and to what extent these may be incorporated and taught in industrial arts machine metalworking courses.

The purpose of this study was to make a survey of the graduates of Technical High School of Fort Worth, Texas, for a period of ten years, from 1942 to 1952, to determine the effectiveness of the preparation they received in helping the graduates to choose a vocation and acquire the basic skills and attitudes that helped them in obtaining a position and to continue as successful workers.

This study is an analysis of the industrial arts program of the Fort Worth Public Schools, Fort Worth, Texas.

The purpose of the study was actually fourfold: first, to study the literature in the field of safety education with special reference to safety education in industrial arts programs concerning the present safety programs and safety standards as compared with those recommended by authorities in the field of safety; second, to visit each of the industrial arts programs and record information concerning the condition of the building and equipment and the use of these facilities; third; to compile the data for interpretation; and fourth, if an analysis of these data indicates a need for revision of the present safety programs, suggestions for improving the programs will be submitted to the supervisor of industrial arts and other administrators of the Fort Worth Public Schools.

The problem with which this study is concerned is that of developing a curriculum guide educators can use in planning and organizing a course of study involving computer drafting at the junior college and technical vocational school levels. This study is also concerned with the impact of computer drafting on the present drafting curriculum.

The purpose of this study was to indicate if there exists a need for additional learning experiences in the area of vocational and industrial arts education at Lawrence D. Bell High School. The information acquired from the check list, combined with other related studies, should help establish valid guide lines for curriculum development in this area. This study should provide information as to whether or not the needs of the terminal student and the college preparatory student are dissimilar.

This is a study of the drafting curriculum in the Fort Worth public high schools, Fort Worth, Texas.The specific purposes or the study were as follows: 1. To review and compare the courses and content of the drafting curriculums listed in the bulletins of the TEA and the Fort Worth Public Schools. 2. To study drafting scheduling procedures in each of the Fort Worth public high schools. 3. To study the courses and contents of the drafting curriculums offered in each of the Fort Worth public high schools. 4. To determine if there are variations from school to school in curriculum content of the drafting courses in each of the Fort Worth public high schools. 5. To offer suggestions and recommendations for improving the program, if weaknesses were evident, when the program was evaluated by acceptable criteria (12, 13, and 14).

Industrial arts has been taught in varying degrees in the elementary schools of Texas for a number of years. In some cases, industrial arts activities have been integrated with other subject matter areas, and in some cases they have been taught as a separate subject. There have been several studies made concerning what the nature and extent of industrial arts activities should be at the elementary level. Research indicates, however, that there has been no study made to determine if industrial arts activities could be used to enrich the elementary curriculum in the Fort Worth Independent School District. The problem of this study is to determine if there is a need for industrial arts activities to enrich the elementary curriculum in the Fort Worth Independent School District, Fort Worth, Texas.

The purpose of the study is to develop and propose a system of industrial arts accounting and bookkeeping for the secondary schools of Fort Worth, Texas, if it is found, through the study, that the instructors of industrial arts in Fort Worth, Texas, need and desire a systematic method of keeping financial records.

The purpose of this study was to determine the required knowledge and skills of mobile home metalworkers in the Dallas-Fort Worth area as compared to the Industrial Arts metalworking curriculum presented in Texas Education Agency, Bulletin 615. Items of significance in Chapter IV appear in findings, conclusions, and recommendations. The "use of basic hand tools" and "safety concepts" were consistently emphasized and required by manufacturing firms. It was found that educational requirements were quite often "some high school" or less. It was found that Industrial Arts metalworking curriculum was closely related to required knowledge and skills of mobile home metalworkers. It was recommended that Industrial Arts course work be extended into lower levels of education.