Graphene receives enormous attention owing to its distinctive physical and chemical prosperities. Growing and transferring graphene to different substrates have been investigated. The graphene growing on the copper substrate has an advantage of low solubility of carbon on the copper which allow us to grow mostly monolayer graphene. Graphene sheet of few centimeters can be transferred to 300nm silicon oxide and quartz crystal pre-deposited with metal like Cu and Ru. Characterization of the graphene has been done with Raman and contact angle measurement and recently quartz crystal microbalance (QCM) has been employed. The underpotential deposition (UPD) process of Bi on Ru metal surface is studied using electrochemical quartz crystal microbalance (EQCM) and XPS techniques. Both Bi UPD and Bi bulk deposition are clearly observed on Ru in 1mM Bi (NO3)3/0.5M H2SO4. Bi monolayer coverage calculated from mass (MLMass) and from charge (MLCharge) were compared with respect to the potential scanning rates, anions and ambient controls. EQCM results indicate that Bi UPD on Ru is mostly scan rate independent but exhibits interesting difference at the slower scan. Bi UPD monolayer coverage calculated from cathodic frequency change (ΔfCathodic) is significantly smaller than the monolayer coverage derived from integrated charge under the cathodic …

Nanoparticles, simple yet groundbreaking objects have led to the discovery of invaluable information due to their physiological, chemical, and physical properties, have become a hot topic in various fields of study including but not limited to chemistry, biology, and physics. In the work presented here, demonstrations of various applications of chemical free nanoparticles are explored, from the determination of a non-invasive method for the study of the exposome via using soft-landing ion mobility (SLIM) deposited nanoparticles as a matrix-assisted laser desorption/ionization (MALDI-MS) matrix replacement, to the direct SLIM-exposure of nanoparticles onto living organisms. While there is plenty of published work in soft-landing at operating pressures of 1 Torr, the work presented here shows how this technology can be operated at the less common ambient pressure. The ease of construction of this instrument allows for various modifications to be performed for a wide array of applications, furthermore the flexibility in metallic sample, operating pressure, and deposition time only open doors to many other future applications. The work presented will also show that our ambient SLIM system is also able to be operated for toxicological studies, as the operation at ambient pressure opens the door to new applications where vacuum conditions are …

Previous work was successful at delineating reaction pathways for the photoactivated synthesis of an amine, [CztBu(PyriPr)(NH2−PyriPr)], by double intramolecular C−H activation and functionalization via irradiating a metal(II) azido complex, [CztBu(PyriPr)2NiN3. The present work seeks to expand upon earlier research, and to substitute the metal with iron or cobalt, and to expand the study to photocatalyzed intermolecular C−H activation and functionalization of organic substrates. Density functional theory (DFT) – B3LYP/6-31+G(d') and APFD/Def2TZVP – and time-dependent density functional theory (TDDFT) were used to propose a detailed pathway comprised of intermediates of low, intermediate, or high spin multiplicity and photo-generated excited states for the reaction of the azido complex, [CztBu(PyriPr)2MN3] to form the amine complex [CztBu(PyriPr)M(NH2−PyriPr)], M = Co, Ni or Fe, and the intermediates along the reaction pathway. For applications on quantum computing, the photophysical properties of photoactive d8 nickel(II) complexes are modeled. Such systems take advantage of a two-level system pathway between ground to excited state electronic transitions and could be useful for the discovery of successful candidates for a room temperature qubit, the analogue of a classical computational bit. A modified organometallic model, inspired by a nitrogen vacancy selective intersystem crossing model in diamond, was developed to take advantage of …

The gas phase reactions of atomic chlorine with hydrogen sulfide, ammonia, benzene, and ethylene are investigated using the laser flash photolysis / resonance fluorescence experimental technique. In addition, the kinetics of the reverse processes for the latter two elementary reactions are also studied experimentally. The absolute rate constants for these processes are measured over a wide range of conditions, and the results offer new accurate information about the reactivity and thermochemistry of these systems. The temperature dependences of these reactions are interpreted via the Arrhenius equation, which yields significantly negative activation energies for the reaction of the chlorine atom and hydrogen sulfide as well as for that between the phenyl radical and hydrogen chloride. Positive activation energies which are smaller than the overall endothermicity are measured for the reactions between atomic chlorine with ammonia and ethylene, which suggests that the reverse processes for these reactions also possess negative activation energies. The enthalpies of formation of the phenyl and β-chlorovinyl are assessed via the third-law method. The stability and reactivity of each reaction system is further rationalized based on potential energy surfaces, computed with high-level ab initio quantum mechanical methods and refined through the inclusion of effects which arise from the …

Recognizing the dual ability of the nitride ligand to react as a nucleophile or an electrophile – depending on the metal and other supporting ligands – is a key to their broad-range reactivity; thus, three DFT studies were initiated to investigate these two factors effects (the metal and supporting ligands) for tuning nitride ligand reactivity for C-H and N-H bond activation/functionalization. We focused on studying these factors effects from both a kinetic and thermodynamic perspective in order to delineate new principles that explain the outcomes of TMN reactions. Chapter 2 reports a kinetic study of C–H amination of toluene to produce a new Csp3–N (benzylamine) or Csp2–N (para-toluidine) bond activated by diruthenium nitride intermediate. Studying three different mechanisms highlighted the excellent ability of diruthenium nitride to transform a C-H bond to a new C-N bond. These results also revealed that nitride basicity played an important role in determining C–H bond activating ability. Chapter 3 thus reports a thermodynamic study to map basicity trends of more than a one hundred TMN complexes of the 3d and 4d metals. TMN pKb(N) values were calculated in acetonitrile. Basicity trends decreased from left to right across the 3d and 4d rows and increases from …

A plethora of novel scientific phenomena and practical applications, such as solid-state molecular solar cells and other optoelectronic devices for energy harvesting and lighting technologies, have catalyzed us to synthesize novel compounds with tunable properties. Synthetic routes, single crystal structures, and spectral and materials properties are described. Reactions of Ag(I) and Cu(I) precursors with various types of ligands -- including the azolates, diimines, and diiphosphines -- lead to the corresponding complexes in high yield. Varying the metal ions, ligands, synthetic methods, solvents, and/or stoichiometric ratio can change the properties including the molecular geometry or packing structure, reactivity, photophysical and photochemical properties, semiconducting behavior, and/or porosity of the functional coordination polymers obtained. For solar cells purposes, the absorption energy can be extended from the ultraviolet (UV) region, through the entire visible (Vis) region, onto a significant portion of the near-infrared (NIR) portion of the solar spectrum with high absorption coefficients due to the infinite conjugation of Cu(I) with diimine ligands. Twenty-eight crystal structures were obtained by conventional crystal growth methods from organic solvents, whereas their bulk product syntheses also included "green chemistry" approaches that precluded the use of hazardous organic solvents. The resulting products are characterized by powder x-ray diffraction (PXRD), …

Donor-acceptor systems exhibit distinctive attributes rendering them highly promising for the emulation of natural photosynthesis and the efficient capture of solar energy. This dissertation is primarily devoted to the investigation of these unique features within diverse donor-acceptor system typologies, encompassing categories such as closely covalently linked, push-pull, supramolecular, and multi-modular donor- acceptor conjugates. The research encompasses an examination of photosynthetic analogs involving compounds such as chelated azadipyromethene (AzaBODIPY), N,N-dimethylaminophenyl (NND), phenothiazine (PTZ), triphenylamine (TPA), phenothiazine sulfone (PTZSO2), tetracyanobutadiene (TCBD), and expanded tetracyanobutadiene (exTCBD). The strategic configuration of the donor (D), acceptor (A), and spacer elements within these constructs serves to promote intramolecular charge transfer (ICT), which are crucial for efficient charge and electron transfer. The employment of cutting-edge analytical techniques, such as ultrafast transient absorption spectroscopy, is integral to the study. Furthermore, a comprehensive suite of analytical methodologies including steady-state UV-visible absorption spectroscopy, fluorescence and phosphorescence spectroscopies, electrochemical techniques (including cyclic voltammetry and differential pulse voltammetry), spectroelectrochemistry, and density functional theory calculation (DFT), collectively contribute to the comprehensive characterization of push-pull donor-acceptor systems, with a particular emphasis on their potential as highly effective solar energy harvesting application.

Electric field studies, electrochromism, were used to obtain excited-state data for analogous divalent sulfur compounds. The sulfides investigated were dimethyl sulfide and small cyclic sulfides including the three to six member ring compounds. The excited-state dipole moments and polarizabilities are reported for the first s, p, and d Rydberg absorption bands which occur in the near vacuum ultraviolet region from 230 to 170 nm. The excited-state data are interpreted in terms of the particular excited-state (s, p, or d) for the molecules and the bending differences due to the presence of the ring and the number of atoms in the ring. The next section describes the use of electrochromism to investigate the pressure effect of argon, carbon tetrafluoride and sulfur hexafluoride on the spectra for molecular Rydberg states.

A series of dihydroxy bridged copper(II) complexes of the type [(L)Cu(OH)₂Cu(L)]x₂ * nH₂0, where L is 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine or 1,10-phenanthroline, x is a counter ion, and n is the number of water molecules, was synthesized. In the case of monohydroxy bridged copper(II) complexes, we have found a new method of synthesis for [ (L)₂Cu(OH)Cu(L)₂ ] (ClO₄)₃, where L is 2,2'-bipyridine or 1,10-phenanthroline. We have synthesized five new monohydroxy bridged copper(II) complexes, thus increasing the number of monohydroxy bridged copper(II) complexes to nine. All complexes have been characterized by infrared spectroscopy, UV-visible spectroscopy, magnetic moments, and elemental analysis. The electron spin resonance results establish that the fulvic acids contain organic free radicals as an internal part of their molecular structure. The concentration of unpaired electrons will increase by increasing the pH. The unpaired electron in fulvic acid interacts with the unpaired electron on copper(II) through the Π system, and this will decrease the spin concentration of fulvic acid complexed with copper(II). The displacement of titration curve from a free ligand (fructose-1,6-diphosphate, ribulose-1,5-diphosphate, phospherine, phosphothreonine, and 3-phosphoglyceric acid, to a ligand plus copper(II) (1:1 ratio) shows there is a strong interaction between copper(II) and the corresponding ligand. All complexes absorb UV-visible at …

A rapidly growing topic of great interest is the adaptation of benchtop analytical instrumentation for use in outdoor harsh environments. Some of the areas that stand to benefit from field instrumentation development include government agencies involved with the preservation of the environment and institutions responsible for the safety of the general public. Detection systems are at the forefront of the miniaturization movement as the interest in analyte identification and quantitation appears to only be accessible through the use of analytical instrumentation. Mass spectrometry is a distinguished analytical technique known for its ability to detect the mass-to-charge (m/z) ratios of gas-phase ions of interest. Although these systems have been routinely limited to research lab-based analysis, there has been considerable development of miniaturized and portable mass spectrometry systems. Membrane Inlet Mass Spectrometry (MIMS) is becoming a common method of sample introduction that is subject to significant development. MIMS allows for minimal sample preparation, continuous sampling, and excludes complicated analyte introduction techniques. Sampling is accomplished using a semipermeable membrane that allows selective analyte passage into the vacuum of the mass spectrometer. MIMS is becoming the preeminent choice of homeland security and environmental monitoring applications with increasing opportunities for the future development of specialized …

All oxide heterostructure Cr2O3/TiO2-x was deposited on Al2O3(0001) single crystal via MBE. The analysis of interfacial interactions involving two metal oxides resulting in magnetic properties gave insights for using such heterostructures as potential spintronic device materials. The corundum phase epitaxial growth of TiO2-x on Al2O3 was characterized using XPS, AES, EELS, and LEED. The data obtained gives evidence of presence of two-dimensional electron gas at titania surface due to oxygen vacancies formation after deposition. On titania, the deposition of chrome in UHV results in the formation of oxidized chromia overlayer by abstraction of oxygen from the TiO2-x underlayer further increasing the number of vacancies present. In industrial R&D project, dry etching of multiple optical device components was performed using a novel angled etch prototype tool. The first set of experiments involved plasma etching of SiC thin films optimized for target application. The best-known method (BKM) worked from 300mm full wafer to 200mm product. In second experimentation, a variety of gray-tone photoresist received from customers were etched using BKM. Customer received etch rate on each gray-tone material. The third experiments compared recipe R1 to test recipe R2 on the test vehicle VDC. R2 showed faster etch rate but lower process repeatability …

An extremely facile and novel method called spontaneous deposition, to deposit noble metal nanoparticles on a most stable form of carbon (C) i.e. diamond is presented. Nanometer sized particles of such metals as platinum (Pt), palladium (Pd), gold (Au), copper (Cu) and silver (Ag) could be deposited on boron-doped (B-doped) polycrystalline diamond films grown on silicon (Si) substrates, by simply immersing the diamond/Si sample in hydrofluoric acid (HF) solution containing ions of the corresponding metal. The electrons for the reduction of metal ions came from the Si back substrate. The diamond/Si interfacial ohmic contact was of paramount importance to the observation of the spontaneous deposition process. The metal/diamond (M/C) surfaces were investigated using Raman spectroscopy, scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffractometry (XRD). The morphology (i.e. size and distribution) of metal nanoparticles deposits could be controlled by adjusting the metal ion concentration, HF concentration and deposition time. XRD data indicate the presence of textured and strained crystal lattices of Pd for different Pd/C morphologies, which seem to influence the electrocatalytic oxidation of formaldehyde (HCHO). The sensitivity of electrocatalytic reactions to surface crystal structure implies that M/C could be fabricated for specific electrocatalytic applications. The research also …

The major topics discussed are the phosphorescence sensitization in the lanthanides via energy transfer and in the organics by heavy atom effects. The f-f transitions in lanthanides are parity forbidden and have weak molar extinction coefficients. Upon complexation with the ligand, ttrpy (4'-p-Tolyl-[2,2':6',2"]-terpyridine) the absorption takes place through the ligand and the excitation is transferred to the lanthanides, which in turn emit. This process is known as "sensitized luminescence." Bright red emission from europium and bright green emission from terbium complexes were observed. There is ongoing work on the making of OLEDs with neutral complexes of lanthanide hexafluoroacetyl acetonate/ttrpy, studied in this dissertation. Attempts to observe analogous energy transfer from the inorganic donor complexes of Au(I) thiocyanates were unsuccessful due to poor overlap of the emissions of these systems with the absorptions of Eu(III) and Tb(III). Photophysics of silver-aromatic complexes deals with the enhancement of phosphorescence in the aromatics. The heavy atom effect of the silver is responsible for this enhancement in phosphorescence. Aromatics such as naphthalene, perylene, anthracene and pyrene were involved in this study. Stern Volmer plots were studied by performing the quenching studies. The quenchers employed were both heavy metals such as silver and thallium and lighter …

A series of acene-fused porphyrins and 1,10-phenanthroline-fused porphyrins were synthesized and characterized via NMR spectroscopy and mass spectrometry. The acene-fused porphyrins exhibit unique optoelectronic properties, most notably they exhibit highly red-shifted absorption bands. The 1,10-phenanthroline-fused porphyrins are of interest for their ability to bond to as variety of metals to form chelation complexes.

The site of initial metal-carbonyl bond-breaking during ligand-exchange reactions in a series of octahedral metal carbonyls of the type (L2)M(CO)4 (M = Cr, Mo, W; L2 = diphos, phen, dipy) has been determined employing infrared spectroscopy and Fourier transform nuclear magnetic resonance spectroscopy. The results of this study reveal, for all metal carbonyl complexes of the type mentioned above, that loss of CO occurs exclusively at an axial position (cis to the bidentate ligand, I^)• The dynamic nature of the five-coordinate intermediates, such as (diphos)Mo(CO)3, (phen)M(CO)3 (M = Cr, Mo, W), and (dipy)Cr(CO)3, which are generated in solution upon CO dissociation, is reported and discussed. The results of this investigation confirm that these intermediates are fluxional on the time scale of CO-exchange process. A mechanism which describes the site of initial metal-carbonyl bond-breaking and the fluxionality of the five-coordinate intermediate during ligand-exchange reactions in the complexes (L2)M(CO)4 is proposed. A kinetic study of reactions of W(CO)6 with pseudo-halide anions (NCS-, NCO-, CN-) has been initiated. The results indicate that these reactions proceed via a bimolecular path, which involves initial attack of the pseudo-halide anion at a carbonyl carbon of W(CO)6,

In the first part of this dissertation work, Al bond pad corrosion behavior was investigated in the presence of common industrial contaminants such as chloride (Cl-) and fluoride (F-). Al corrosion while in direct contact with Cu displayed rapid hydrogen (H2) gas evolution and dendrite propagation. In contrast, Al without bimetallic contact showed only minor surface roughening. This observed difference in the corrosion mechanism between Cl- and F- is attributed to the solubility of the corrosion products (AlCl3 vs. AlF3) formed on the Al surface. Our subsequent work explored corrosion prevention inhibition of wire-bonded devices (WBD) in the Cl- environment. Our research shows that the Al bond pad was protected against corrosion by chemically modifying the surface of the Cu wires, thereby preventing the H2 evolution. The inhibitor was observed to be highly selective, thermally stable, hydrophobic, and cost-effective, making it viable for industrial application of this coating for Al bond pad corrosion prevention. In the second part of the dissertation work, we utilized a novel approach of using ultraviolet-visible spectroscopy (UV-Vis) as a chemical-sensitive monitoring tool of the chemical environment in Cu etch bath. The UV-Vis technique illuminates the roles of H+, Cl-, Cu+, and Cu2+ to the etch …

With the reliability requirements of automobile microelectronics pushing towards near 0 ppb levels of failure control, halide induced corrosion issues in wire bonded devices have to be tightly controlled to achieve such a high reliability goal. With real-time corrosion monitoring, for the first time we demonstrated that the explosive H2 evolution coupled with the oxygen reduction reaction, occurring at the critical Al/Cu interfaces, is the key driving force for the observed aggressive corrosion. Several types of passivation coating on Cu wire surfaces to effectively block the cathodic H2 evolution were explored with an aim to disrupt this explosive corrosion cycle. The properties of the protective coating were evaluated using various analytical techniques. The surface coating exhibited high thermal stability up to 260 °C (evaluated using TGA analysis). A uniform, highly hydrophobic coating (surface contact angle of >130° with water), was achieved by carefully controlling CVD parameters such as time of deposition, surface control of Cu metal, amount of inhibitor compound loading, temperature of coating process etc. FTIR spectroscopy combined with corrosion screening was used to optimize the CVD passivated coating with strong chemisorption. SEM and EDX, XPS were carried out on various coated surfaces to understand the composition and selectivity …

Many previous studies have demonstrated that gold compounds possess successful results in catalysis and in medicinal chemistry. The central aim of this dissertation is the design and synthesis of novel gold (I) acyclic diamino carbene complexes as a chemotherapeutic agent for triple-negative breast cancer (TNBC) and for catalysis. In this study, a series of chiral neutral and cationic gold (I) acyclic diamino carbene (ADC) complexes and neutral gold (I) bis- ADC complexes have been synthesized. As the chiral neutral gold (I) ADCs, four diastereomers of S binaphthyl L proline tertiary butyl ester gold (I) chloride, S binaphthyl D proline tertiary butyl ester gold (I) chloride, R binaphthyl L proline tertiary butyl ester gold (I) chloride, and R binaphthyl D proline tertiary butyl ester gold (I) chloride have been synthesized and characterized. Different chiral gold (I) ADC complexes with bulky chiral binaphthyl group and with different amine groups of morpholine, chiral proline methyl ester, and benzyl ester have been synthesized and characterized. After that four diastereomers of the nitrile adduct of cationic binaphthyl proline tertiary butyl ester nitrile and four diastereomers of the isonitrile versions of it have been synthesized and characterized. A series of gold (I) cationic bis ADC complexes …

Part I. The syntheses of a series of stable ferrocenylsilane compounds and their corresponding polyradical cations are reported. Electron spin properties of these molecules were investigated by cyclic voltammetry, ESR, and magnetic susceptibility measurements. All the compounds presented, showed significant electronic communication (>100 mV) between the redox centers by CV. Part II. Baeyer-Villiger oxidation of (1,9-dimethyl-PCU-8,11-dione) was performed using m-chloroperoxybenzoic acid in 1:2 molar ratios. The product obtained was the corresponding dilactone 113. The structure of the reaction products was established unequivocally via single crystal X-ray diffraction methods. The reaction of the 1,9-dimethyl-PCU-8,11-dione with 1:1 molar ratio of m-chloroperoxybenzoic acid produced again the dilactone 113, and not the expected monolactone 114. Ceric ammonium nitrate (CAN) promoted oxidation reaction of 1,9-dimethyl-PCU-8,11-dione afforded a mixture of dimethylated lactones, which indicated unique reaction mechanism pathways. These individual isomers, 115 and 116, have been isolated from these mixtures via column chromatography by using silica gel as adsorbent followed by fractional recrystallization of individual chromatography fractions. Structures of these pure products have been established unequivocally by application of single crystal X-ray crystallographic methods.

Thermal and flash photolysis studies of ligand-substitution reactions of cis-(pip)(L)M(CO)_4 by L' (pip = piperidine; L, L' = CO, phosphines, phosphites; M = Cr, Mo) implicate square-pyramidal [(L)M(CO)_4], in which L occupies a coordination site in the equatorial plane, as the reactive species. In chlorobenzene (= CB) solvent, the predominant species formed after flash photolysis and a steady-state intermediate for the thermal reaction is cis—[(CB)(L)M(CO)_4], for which rates of CB-dissociation increase with increasing steric demands of coordinated L. Rates of CB-dissociation from trans-[(CB)(L)M(CO)_4] intermediates, formed after photolysis but not thermally, exhibit no observable dependence on the steric properties of the coordinated L.

Artificial photosynthesis, for the purpose of converting solar energy into fuel, is one of the most viable and promising alternative approaches to solve the current global energy and environmental issues. Among the challenges faced in artificial photosynthesis is in building photosystems that can effectively and efficiently perform light absorption and charge separation in broad-band capturing donor-acceptor systems. While having a broad-band capturing antenna system that can harness incoming photons is crucial, another equally important task is to successfully couple the antenna system, while maintaining its optical properties, to an energy or electron acceptor which serves as the reaction center for the generation of charged species of useful potential energy. The stored potential energy will be utilized in different applications such as driving electrons in solar cells or in splitting water for the generation of fuel. Hence, the particular endeavor of this thesis is to study and synthesize molecular/supramolecular systems with wide-band capturing capabilities to generate long-lived charge separated states. The sensitizer used in building these systems in the present study is 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene, for short, BF2 chelated Azaboron dipyrromenthene or AzaBODIPY. A handful of novel donor-acceptor systems based on AzaBODIPY have been successfully designed, synthesized and their photochemistry have been investigated …

When E- or Z-l-methyl-l-phenyl-2-neopentylsilene was generated by the retro-Diels-Alder vacuum-sealed tube thermolysis of its corresponding anthracene adduct, in the presence of various alkoxysilanes, only one diastereomeric adduct was formed in each case, showing that the reactions are stereospecific. An x-ray crystal structure of the methoxytriphenylsilane adduct of the E-silene confirmed its relative configuration as (R,S) or (S,R). This demonstrated that the addition of alkoxysilanes to silenes is stereospecific and syn. The relative configurations of similar alkoxysilane and alkoxystannane adducts to E- and Z-l-methyl-l-phenyl-2-neopentylsilene were assigned based on a combination of xray structures and *3C NMR data. A strong, nonbonded oxygen-metal interaction is apparent in all of those compounds studied. Treatment of the alkoxystannane adducts with alkyl lithium reagents results in tin-lithium exchange in some cases. The results indicate that the resulting <x-lithio alkoxysilanes are not configurationally stable in either THF or hydrocarbon solvents. The reaction of tert butyl lithium with a-trimethylsilylvinylmethylphenylchlorosilane in hydrocarbon solvents yields E- and Z-l-methyl-l-phenyl-2-neopentyl-2-trimethylsilylsilene. In the absence of any traps these silenes undergo a novel tert butyl lithium catalyzed rearrangement to 2-phenyl-3-trimethylsilyl-5,5-dimethyl-2-silahex-3-ene. These silenes were also trapped as their [4+2] cycloadducts with anthracene. The Z-isomer of the anthracene adduct was separated and its stereochemistry confirmed by …

Epitaxial multilayer h-BN(0001) heterostructures and graphene/h-BN heterostructures have many potential applications in spintronics. The use of h-BN and graphene require atomically precise control and azimuthal alignment of the individual layers in the structure. These in turn require fabrication of devices by direct scalable methods rather than physical transfer of BN and graphene flakes, and such scalable methods are also critical for industrially compatible development of 2D devices. The growth of h-BN(0001) multilayers on Co and Ni, and graphene/h-BN(0001) heterostructures on Co have been studied which meet these criteria. Atomic Layer Epitaxy (ALE) of BN was carried out resulting in the formation of macroscopically continuous h-BN(0001) multilayers using BCl3 and NH3 as precursors. X-ray photoemission spectra (XPS) show that the films are stoichiometric with an average film thickness linearly proportional to the number of BCl3/NH3 cycles. Molecular beam epitaxy (MBE) of C yielded few layer graphene in azimuthal registry with BN/Co(0001) substrate. Low energy electron diffraction (LEED) measurements indicate azimuthally oriented growth of both BN and graphene layers in registry with the substrate lattice. Photoemission data indicate B:N atomic ratios of 1:1. Direct growth temperatures of 600 K for BN and 800 to 900 K for graphene MBE indicate multiple integration …

This dissertation demonstrates that it is possible to create a donor-acceptor system that can transform sunlight into electrons. By using site-directed synthesis, it was possible to create a novel trans-A2B2 porphyrin. In the pursuit of creating a supramolecular system, both the novel (TPA-BT)2ZnP and C60imidazole combined in solution such that the nitrogenous lone pair of C60 imidazole would coordinate axially to the zinc atom in the porphyrin. The conjugates' characterization utilized spectral, electrochemical, and computational techniques. Computational studies revealed in the optimized structure that the HOMO localized on the porphyrin and LUMO centered over the C60imidazole entity. Rehm-Weller calculations showed feasibility of singlet-electron transfer. Femtosecond transient absorption studies documented an efficient photoinduced charge separation in the conjugate. The subsequent work through steady-state and time-resolved transient absorption techniques that photoinduced electron transfer takes place between the synthesized phenylimidazole functionalized bisstyrylBODIPY (BDP(Im)2) and three selected zinc tetrapyrroles. This dyad consisted of BDP(Im)2 and either zinc tetratolylporphyrin (ZnP), zinc-tetra-t-butyl phthalocyanine (ZnPc), or zinc tetra-t-butyl naphthalocyanine (ZnNc) in a solution solvated by σ-dichlorobenzene (DCB). The three dyads (BDP(Im)2:ZnP, BDP(Im)2:ZnPc, and BDP(Im)2:ZnNc) were investigated by spectroscopic, computational, and electrochemical methods. The 1:1 complex of the dyads in optical absorption studies were approximately ~104 M-1 suggesting …