With the reliability requirements of automobile microelectronics pushing towards near 0 ppb levels of failure control, halide induced corrosion issues in wire bonded devices have to be tightly controlled to achieve such a high reliability goal. With real-time corrosion monitoring, for the first time we demonstrated that the explosive H2 evolution coupled with the oxygen reduction reaction, occurring at the critical Al/Cu interfaces, is the key driving force for the observed aggressive corrosion. Several types of passivation coating on Cu wire surfaces to effectively block the cathodic H2 evolution were explored with an aim to disrupt this explosive corrosion cycle. The properties of the protective coating were evaluated using various analytical techniques. The surface coating exhibited high thermal stability up to 260 °C (evaluated using TGA analysis). A uniform, highly hydrophobic coating (surface contact angle of >130° with water), was achieved by carefully controlling CVD parameters such as time of deposition, surface control of Cu metal, amount of inhibitor compound loading, temperature of coating process etc. FTIR spectroscopy combined with corrosion screening was used to optimize the CVD passivated coating with strong chemisorption. SEM and EDX, XPS were carried out on various coated surfaces to understand the composition and selectivity …

Photophysical properties of an array of various polyaromatic hydrocarbons were benchmarked with B3LYP, M06 and B97D methods coupled with Pople and CEP-31G(d) basis sets. Results from the benchmark show the importance of diffuse basis sets when modeling the electronic properties of highly conjugated systems and provide qualitative reliable accuracy with certain levels of theory. B97D and M06 are applied to modeling pyrene adducts governed by non-covalent interactions in both gaseous and condensed states to reproduce experimental spectra. DFT calculations with both B97D and M06 functionals show qualitatively and quantitatively that pyrene dimer is a stronger π–base as compared to its monomer. Binding energies coupled with MEP, PCA and Qzz results show that the difference in π-basicity of the monomer and dimer impacts the supramolecular chemistry involved in adducts formed with super π-acidic silver cyclometallic trimer (CTC). Non-covalent interactions between coinage metal CTCs and ammonia/phosphine substrates is reported. Interactions between these substrates and the facial plane of the π-rich gold CTC reveal a novel interaction, where the typical Lewis acid/base roles are reversed for the substrates. Adducts formed through this type of interaction define typical Lewis bases like ammonia and phosphine as Lewis acids, wherein the partially positive hydrogens coordinate to …

Over the last 20 years, there has occurred an increase in the number, scope, and impact of nanomaterials projects. By leveraging the Surface Plasmon Resonance of metallic nanoparticles for labelling, sensing, and treatment, researchers have demonstrated the versatile utility of these nanomaterials in medicine. The literature provides evidence of use of simple, well-known chemistry for nanomaterials synthesis when the focus is new applications of nanomaterials. A case in point, is the synthesis of metallic nanoparticles, whereby HAuCl4, CuCl2, Cu(acac)2, and AgNO3 are typically employed as nanoparticle precursors. Unfortunately, the use of these precursors limits the number of applications available to these materials - particularly for AuNPs in medicine, where the byproducts of nanoparticle synthesis (most often surface-adsorbed reductants, toxic stabilizers, and growth directors) cause nanoparticles to fail clinical trials. Despite the several thousand publications detailing the advancements in nanoparticle therapeutics, as of 2017, there were only 50 FDA-approved nanoparticle formulations. Less than 10 were based on metallic nanoparticles. This is a problem because many of these nanoparticle therapeutics demonstrate potent cell killing ability and labeling of cells. A solution to this problem may be the use of weakly coordinated, monovalent metal complexes, which require only one electron to reduce them …

Corrosion is an unstoppable process that occurs spontaneously in many areas of industry, specially, oil and gas industries. Therefore, the need of developing protective coating to lower the cost of corrosion is very consistent. Among different methods, electrodeposition has been a popular method since it offer many advantages such as low cost, ability to control the surface and thickness of the coating, ability to perform at low temperature and pressure, and very convenience. Ceramic nanoparticles have been widely incorporated into metal coating and used as a protective layer to improve both corrosion and hardness properties. Diazonium synthesis was used to modify cerium oxide nanoparticles by grafting with ferrocene for use in nickel nanocomposite coating. Citric acid and citrate salt were used as stabilizing ligands for yttrium oxide and praseodymium oxide nanoparticles in nickel plating solution to prevent the formation of hydroxide, thus, higher amount of nanoparticles was able to incorporate into nanocomposite coatings. These fabricated coatings were evaluate for the corrosion and mechanical properties using many different instruments and electrochemical techniques. As modified cerium oxide, stabilized yttrium oxide or praseodymium oxide added into nickel coatings. The results showed an increase in hardness and corrosion resistance leading to the overall improvement …

This dissertation focuses on the computational investigation of gold(I) acyclic diaminocarbene (ADC) complexes and their application in homogeneous gold(I) catalysis. Chapter 2 is an in-depth computational investigation of the σ- and π-bonding interactions that make up the gold-carbene bond. Due to the inherent conformation flexibility of ADC ligands, distortions of the carbene plane can arise that disrupt orbital overlap between the lone pairs on the adjacent nitrogen atoms and the empty p-orbital of the carbene. This study investigated the affect these distortions have on the strength of the σ- and π-bonding interactions. This investigation demonstrated that while these distortions can affect the σ- and π-bonding interactions, the ADC ligand have to become highly distorted before any significant change in energy of either the σ- or π-bonding interactions occurs. Chapter 3 is a collaborative investigation between experimental and computational methods, DFT calculations were employed to support the experimental catalytic results and determine the role that steric effects have in controlling the regioselectivity of a long-standing electronically controlled gold(I)-catalyzed tandem 1,6-enyne cyclization/hydroarylation reaction with indole. This study demonstrated that by sterically hindering nucleophilic attack of indole at the favored position, nucleophilic attack would occur at a secondary position leading to the selective …

Gas hydrate formation and corrosion can cause serious safety and flow assurance problems in subsea environments. One aspect that has been given less attention is the corrosion behavior of materials in gas hydrate formation environment (GHFE). This work introduces a new technique/method for corrosion testing of materials exposed to low temperatures GHFEs. This technique allows pH monitoring, and control of test conditions like temperature. In this work, GHFE is defined as an environment that includes water, methanol and its degraded products in the presence of corrosive agents like CO2 and chloride salt at gas hydrate formation temperatures (GHFT). After 20 hrs immersion in CO2-saturated salinity environment at GHFT, as-deposited Ni-Mo alloy coating has the highest corrosion resistance of 33.28 kΩ cm2. The corrosion resistance dropped to 14.36 kΩ cm2 and 11.11 kΩ cm2 in the sweet low-salinity and sweet high-salinity test solutions respectively. The combined results of SEM/EDX showed that the Ni-Mo coating oxide layer broke down quicker in sweet high-salinity environment than sweet low-salinity environment. When carbon steel was immersed in a CO2-saturated high salinity environment at GHFT, there was slight overall change in corrosion rate (CR) as salt concentration increase from 3 wt% to 25 wt%. In degraded …

This work discusses the C-H bond activation by transition metal complexes using various computational methods. First, we performed a DFT study of oxidative addition of methane to Ta(OC2H4)3A (where A may act as an ancillary ligand) to understand how A may affect the propensity of the complex to undergo oxidative addition. Among the A groups studied, they can be a Lewis acid (B or Al), a saturated, electron-precise moiety (CH or SiH), a σ-donor (N), or a σ-donor/π-acid (P). By varying A, we seek to understand how changing the electronic properties of A can affect the kinetics and thermodynamics of methane C–H activation by these complexes. For all A, the TS with H trans to A is favored kinetically over TS with CH3 trans to A. Upon moving from electron-deficient to electron-rich moieties (P and N), the computed C–H activation barrier for the kinetic product decreases significantly. Thus, changing A greatly influences the barrier for methane C–H oxidative addition by these complexes. Secondly, a computational study of oxidative addition (OA) of methane to M(OC2H4)3A (M = Ta, Re and A = ancillary ligand) was carried out using various computational methods. The purpose of this study was to understand how variation …

Computational methods were employed to investigate catalytic processes. First, DFT calculations predicted the important geometry metrics of a copper–nitrene complex. MCSCF calculations supported the open-shell singlet state as the ground state of a monomeric copper nitrene, which was consistent with the diamagnetic character deduced from experimental observations. The calculations predicted an elusive terminal copper nitrene intermediate. Second, DFT methods were carried out to investigate the mechanism of C–F bond activation by a low-coordinate cobalt(I) complex. The computational models suggested that oxidative addition, which is very rare for 3d metals, was preferred. A π–adduct of PhF was predicted to be a plausible intermediate via calculations. Third, DFT calculations were performed to study ancillary ligand effects on C(sp3)–N bond forming reductive elimination from alkylpalladium(II) amido complexes with different phosphine supporting ligands. The dimerization study of alkylpalladium(II) amido complexes indicated an unique arrangement of dative and covalent Pd-N bonds within the core four-membered ring of bimetallic complexes. In conclusion, computational methods enrich the arsenal of methods available to study catalytic processes in conjunction with experiments.

This work involves synthesis and characterization of isotropic and anisotropic noble metal nanoparticles for applications ranging from antimicrobial uses to anticancer applications. These nanomaterials are stabilized in genuinely benign biomaterials ranging from polymers to cross linked proteins for targeted cancer treatments. The nanoparticles are found to have tunable optical properties.

This dissertation focuses on the development, characterization, and analysis of luminescent materials and coatings for sensing applications, including CO2, heavy metals, and silver. Chapter 2 involves the use of a gold(I) pyrazolate trimer that is able to detect silver ions with an AgNP medium. Detection of silver is vital, because there is an influx of silver into our environment caused by the increased use of AgNP. Therefore, having a sensor that is able to differentiate between and detect only Ag ions is an important first step to solving the toxicity mystery of AgNPs. Chapter 3 focuses on the development of sensor coatings containing a Eu(III) based luminescent system for sensing dissolved CO2 without the aid of an absorption-based dye. It is well-known that monitoring CO2 levels in our environment is important since even at low concentrations it can cause adverse health effects to the human body. This work demonstrates a pH-sensitive Eu complex being used directly as a CO2 sensor without the aid of any other absorption-based dye. Chapter 4 explores the idea of developing a heavy metal sensor for lead and its ability to detect lead in wide concentration range upon changing the pH of the medium and the …

There is a consistent need in many industries, especially oil and gas, to develop coatings which have higher corrosion resistance and better hardness to extend the lifetime of equipment when it is exposed to hostile environments. Electrodeposition has been a favorable method in the synthesis of metal coatings because of its low cost, convenience, ability to work at low temperatures, and ability to control surface morphology and structure. The inclusion of ceramic nanoparticles in metal matrix composites has previously been investigated as a technique to not only increase the corrosion resistance of the native metal but also to improve the hardness and mechanical properties. Cerium oxide nanoparticles were modified through the grafting of organic groups with increasing hydrophobicity for use in nickel coatings on stainless steel to further improve the corrosion properties while maintaining the hardness of the nanocomposite coatings. The process of modifying the cerium oxide nanoparticles involved the use of aryl diazonium salts and resulted in multilayers forming on the surface of the nanoparticles. Praseodymium oxide nanoparticles were also investigated as additives to nickel coatings, since praseodymium oxide has not yet been studied as a possible corrosion protection enhancement in coatings. These coatings were evaluated for composition and …

Corrosion is one of the most expensive failures in industries that used metal components and other construction materials. In fact, corrosion is responsible for hundreds of billions-dollar loss in the US alone each year. In general, corrosion occurs when metal surfaces are exposed to water, oxygen, acids, bases, or salts. Therefore, metal substrates must be protected by using materials that act as barriers to avoid destructive corrosion attack. Aluminum is one of the most common metals used in the industry; and it is used in many places such as refining and petroleum production equipment, pipelines, and fossil fuel power plants. Aluminum is known to have corrosion resistance due to the forming of an oxide layer that can be reformed rapidly if the surface gets damaged. However, in the long-term the oxide layer cannot protect the aluminum surface from corrosion because it is stable only in neutral mediums and it is soluble in acidic and basic environments. Barrier protection is one of the most effective methods that prevent aluminum surfaces from being exposed to corrosive environments. These barriers can be organic or inorganic coatings that can limit the electron transport or the cathodic and the anodic reactions between aluminum alloys and …

Porphyrins offer a very synthetically flexible template which can be modified in numerous ways to synthesize molecules with very useful properties applicable in areas such as non-linear optical properties, photodynamic therapy, dye-sensitized solar cells, chemical sensors and organic electronic devices. β-Substituted π-extended porphyrins offer unique capabilities in tuning the properties of the molecule towards practical applications. Increased π-conjugation allows the HOMO-LUMO gap to decrease and hence to redshift the absorption into the near-IR region. β-Fused benzoporphyrins offer additional benefits in which the benzene ring itself can be further modified using electron donating substituents and electron donating substituents to electronically tune these porphyrins for various uses. The goal of the research pursued in this dissertation was to develop new methods for the development of β-Substituted π-extended porphyrins and to study their optical and electronic properties. To accomplish this goal, we developed new method to synthesize A2B2 type tetrabenzoporphyrins and we studied the electron transfer in such systems. We also studied the effectiveness of such systems in dye sensitized solar cells. A new method to synthesize functionalized naphthalene fused porphyrins was also developed and we were also able to use this method to synthesize a push-pull naphthalene fused porphyrin.

The tetraruthenium cluster H4Ru4(CO)12 has been studied for its reactivity with the unsaturated diphosphine ligands (Z)-Ph2PCH=CHPPh2, 4,5-bis (diphenylphosphino)-4-cyclopenten-1,3-dione, bis(diphenyphosphino)benzene and 1,8- bis(diphenyl phosphino)naphthalene under thermal, near-UV photolysis, and Me3NO-assisted activation. All three cluster activation methods promote loss of CO and furnish the anticipated substitution products that possess a chelating diphosphine ligand. Clusters 1, 2, 3 and 4 have been characterized in solution by IR and NMR spectroscopies, and these data are discussed with respect to the crystallographically determined structures for all new cluster compounds. The 31P NMR spectral data and the solid-state structures confirm the presence of a chelating diphosphine ligand in all four new clusters. Sealed NMR tubes containing clusters 1, 2, 3 and 4 were found to be exceeding stable towards near-UV light and temperatures up to ca. 100°C. The surprisingly robust behavior of the new clusters is contrasted with the related cluster Ru3(CO)10(bpcd) that undergoes fragmentation to the donor-acceptor compound Ru2(CO)6(bpcd) and the phosphido-bridged compound Ru2(CO)6 (µ-PPh2)[µ-C=C(PPh2)C(O)CH2C(O)] under mild conditions. The electrochemical properties have been investigated in the case of clusters 1 and 2 by cyclic voltammetry, and the findings are discussed with respect to the reported electrochemical data on the parent cluster H4Ru4(CO)12.

To form Cu interconnects, dual-damascene techniques like chemical mechanical planarization (CMP) and post-CMP became inevitable for removing the "overburden" Cu and for planarizing the wafer surface. During the CMP processing, Cu interconnects and barrier metal layers experience different electrochemical interactions depending on the slurry composition, pH, and ohmic contact with adjacent metal layers that would set corrosion process. Ruthenium as a replacement of existing diffusion barrier layer will require extensive investigation to eliminate or control the corrosion process during CMP and post CMP. Bimetallic corrosion process was investigated in the ammonium citrate (a complexing agent of Cu in CMP solutions) using micro test patterns and potentiodynamic measurements. The enhanced bimetallic corrosion of copper observed is due to noble behavior of the ruthenium metal. Cu formed Cu(II)-amine and Cu(II)-citrate complexes in alkaline and acidic solutions and a corrosion mechanism has been proposed. The currently used metallization process (PVD, CVD and ALD) require ultra-high vacuum and are expensive. A novel method of Si surface metallization process is discussed that can be achieved at room temperature and does not require ultra-high vacuum. Ruthenation of Si surface through strong Si-Ru covalent bond formation is demonstrated using different ruthenium carbonyl compounds. RBS analysis accounted for …

Baeyer-Villiger oxidation of 1,9-dibromopentacyclo[5.4.0.02,6.03,10.05,9]undecane-8,11-dione (1,9-dibromo-PCU-8,11-dione) was performed by using an excess amount of m-chloroperbenzoic acid (3 equivalents) and resulted in the formation of the corresponding monolactone. The reaction would not proceed to the dilactone stage. The structure of the reaction product was established unequivocally via single crystal X-ray diffraction. Baeyer-Villiger oxidation of 1,9-dibromo-PCU-8,11-dione using ceric ammonium nitrate (CAN) was also performed and afforded a mixture of lactones. Only one of these lactones, which also contained an alkene functionality, could be isolated and characterized. 1,7-dibromo-PCU-8,11-dione was also reacted with CAN, yielding the mono-lactone, which has also been characterized.

Nanocrystalline praseodymium oxide films have been successfully generated on stainless steel substrates. The electrochemical deposition was performed in the cathode compartment of a divided electrochemical cell with a regular three-electrode configuration. The green films obtained by electrodeposition were then annealed at high temperatures for 1-3 hours. X-ray diffraction revealed the fluorite structure of Pr6O11 and the crystallite size was calculated. X-ray photoelectron spectroscopy was employed to study the composition of the oxide films and also the oxidation state of Pr. Scanning electron microscopy was utilized to study the surface texture and microstructure of deposits. Fourier transform infrared spectrometery was used to investigate the composition of the films. The effects of different conditions on the green films were also studied such as different pH values of the electrolyte solution, different deposition modes, different supporting electrolytes and different applied current densities. Sintering experiments were conducted to investigate the properties of the green films. Praseodymium oxide powders were also successfully prepared by combining electrochemical methods with sintering processes. The praseodymium oxide powders were characterized by X-ray diffraction and Fourier transform infrared spectroscopy. The crystallite sizes of the powders were evaluated.

Treatment of dichloromaleic anhydride and 1,8-diaminonaphthalene in either benzene or toluene under refluxing conditions gives low yields of the new heterocyclic compound 8,9-dichloropyrrolo[1,2-a]perimidin-10-one. This product has been isolated and characterized in solution by NMR, IR, and UV/vis spectroscopies, and the solid-state structure of 8,9-dichloropyrrolo[1,2-a]perimidin-10-one has been established by X-ray crystallography. The nature of the HOMO and LUMO levels of 8,9-dichloropyrrolo[1,2-a]perimidin-10-one has been studied by extended Hückel molecular orbital calculations.

The intent of this study is to identify correlations that might exist between Web-based instruction and higher assessment scores in secondary education. The study framework was held within the confines of a public high school chemistry classroom. Within this population there were students identified as gifted and talented (GT) as well as those without this designation. These two classifications were examined for statistically higher assessment scores using a two-tailed t-test. Results indicated that females outperformed males on pre- and post- instructional unit tests. All subgroups improved their logical-thinking skills and exhibited positive attitudes towards Web-based instruction. In general, Web-based instruction proved beneficial to improving classroom performance of all GT and non-GT groups as compared to traditional classroom instruction.

The thermochemistry of several species, and the kinetics of various H atom radical reactions relevant to atmospheric and combustion chemistry were investigated using ab initio theoretical techniques and the flash photolysis / resonance fluorescence technique. Using ab initio quantum mechanical calculations up to the G3 level of theory, the C-H bond strengths of several alkanes were calculated. The bond strengths were calculated using two working reactions. From the results, it is apparent that the bond strengths decrease as methyl groups are added to the central carbon. The results are in good agreement with recent experimental halogenation kinetic studies. Hydrogen bond strengths with sulfur and oxygen were studied via CCSD(T) theory, together with extrapolation to the complete basis set limit. The results for the bond dissociation energies (ground state at 0 K, units: kJ mol-1) are: S-H = 349.9, S-D = 354.7, HS-H = 376.2, DS-D = 383.4, and HO-H = 492.6. These data compare well with experimental literature. The rate constants for the isotopic reactions of H + H2S, D + H2S, H + D2S, and D + D2S are studied at the QCISD(T)/6-311+G(3df,2p) level of theory. The contributions of the exchange reaction versus abstraction are examined through transition state …

The preparation of layered double hydroxides via co-precipitation of a divalent/trivalent metal solution against a base results in 1 mm LDH particles with a disorganized metal lattice. Research was performed to address these morphological issues using techniques such as Ostwald ripening and precipitation via aluminate. Another interesting issue in layered double hydroxide materials is the uptake and orientation of anions into the interlayer. Questions about iron cyanide interlayer anions have been posed. Fourier transform infared spectroscopy and powder x-ray diffraction have been used to investigate these topics. It was found that factors such as orientation, anion charge, and anion structure depended on the divalent/trivalent metal ratio of the hydroxide layer and reactivity time. The cyanide self-addition reaction is an important reaction of classical prebiotic chemistry. This reaction has been shown to give rise to amino acids, purines and pyrimidines. At cyanide concentrations similar to that expected on the early earth, hydrolysis to formamide rather than self-addition occurs. One theory to alleviate this side reaction is the use of minerals or clays that are thought to concentrate and catalyze prebiotics of interest. Layered double hydroxides have been studied as a catalyst for this reaction.

The second order rate constants for nucleophilic substitution by methoxide of (Z)- and (E)-O-methylbenzohydroximoyl fluorides [C6H4C(F)=NOCH3] with various substituents on the phenyl ring [p-OCH3 (1h, 2h), p-CH3 (1g, 2g), p-Cl (1f, 2f), p-H (1e, 2e), (3,5)-bis-CF3 (1i, 2i)] in 90:10 DMSO:MeOH have been measured. A Hammett plot of these rate constants vs σ values gave positive ρ values of 2.95 (Z isomer) and 3.29 (E isomer). Comparison of these rates with methoxide substitution rates for Omethylbenzohydroximoyl bromide [C6H4C(Br)=NOCH3] and Omethylbenzohydroximoyl chloride [C6H4C(Cl)=NOCH3] reveal an element effect for the Z isomers of Br:Cl:F(1e) = 2.21:1.00:79.7 and for the E isomers of Cl:F(2e) = 1.00:18.3. With the p-OCH3-imidoyl halides the following element effects are found: Br:Cl:F(1h) = 2.78:1.00:73.1 for the Z isomer and Br:Cl:F(2h) = 1.97:1.00:12.1 for the E isomer. Measurement of activation parameters revealed ∆S≠ = -17 eu for 1e and ∆S≠ = -9.9 eu for 2e. Ab initio calculations (HF/6-31+G*, MP2/6-31+G*//HF/6-31+G*, B3LYP/6- 31+G*//HF/6-31+G*, HF-SCIPCM/6-31+G*//HF/6-31+G*) were performed to define the reaction surface. These calculations demonstrate a relatively large barrier for nucleophilic attack in relation to halogen loss and support the experimental findings that this reaction proceeds by an addition-elimination mechanism (AN# + DN). The imidoyl fluorides have been used to synthesize …

A brief introduction to the current state of research in the Origins of Life field is given in Part I of this work. Part II covers original research performed by the author and co-workers. Layered Double Hydroxide (LDH) systems are anion-exchanging clays that have the general formula M(II)xM(III)(OH)(2x+2)Y, where M(II) and M(III) are any divalent and trivalent metals, respectively. Y can be nearly any anion, although modern naturally occuring LDH systems incorporate carbonate (CO32-), chloride (Cl-), or sulfate (SO42-) anions. Intercalated cobalticyanide anion shows a small yet observable deviation from local Oh symmetry causing small differences between its oriented and non-oriented infrared spectra. Nitroprusside is shown to intercalate into 2:1 Mg:Al LDH with decomposition to form intercalated ferrocyanide and nitrosyl groups of an unidentified nature. The [Ru(CN)6]4- anion is shown to intercalate into layered double hydroxides in the same manner as other hexacyano anions, such as ferrocyanide and cobalticyanide, with its three-fold rotational axis perpendicular to the hydroxide sheets. The square-planar tetracyano-nickelate(II), -palladate(II), and platinate(II) anions were intercalated into both 2:1 and 3:1 Mg:Al layered double hydroxides (LDH). The basal spacings in the 2:1 hosts are approximately 11 Å, indicating that the anions are inclined approximately 75 degrees relative to …

Thermolysis of CoRu(CO)7(m -PPh2) (1) in refluxing 1,2-dichloroethane in the presence of the diphosphine ligands 2,3-bis(diphenylphosphino)maleic anhydride (bma) and 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) furnishes the new mixed-metal complexes CoRu(CO)4(μ -P-P)(μ -PPh2) [where P-P = bma (3); bpcd (6)], along with trace amounts of the known complex CoRu(CO)6(PPh3)(μ -PPh2) (4). The requisite pentacarbonyl intermediates CoRu(CO)5(μ -P-P)(μ -PPh2) [where P-P = bma (2); bpcd (5)] have been prepared by separate routes and studied for their conversion to CoRu(CO)4(μ -P-P)(μ -PPh2). The complexes 2/3 and 5/6 have been isolated and fully characterized in solution by IR and NMR spectroscopy. The kinetics for the conversion of 2→3 and of 5→6 were measured by IR spectroscopy in chlorobenzene solvent. On the basis of the first-order rate constants, CO inhibition, and the activation parameters, a mechanism involving dissociative CO loss as the rate-limiting step is proposed. The solid-state structure of CoRu(CO)4(μ -bma)(μ -PPh2) (3) reveals that the two PPh2 groups are bound to the ruthenium center while the maleic anhydride π bond is coordinated to the cobalt atom. Thermolysis of the cluster Ru3(CO)12 with the bis(phosphine)hydrazine ligand (MeO)2PN(Me)N(Me)P(OMe)2 (dmpdmh) in toluene at 75°C furnishes the known clusters Ru4(CO)12[μ -N(Me)N(Me)] (9) and Ru3(CO)11[P(OMe)3] (10), in addition to the new …