Access
Partner
Degree Department
Degree Discipline
Degree Level
Country
Decade
584 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
584
next
Explorations with Polycarbocyclic Cage Compounds
A variety of novel cage-functionalized pyridyl containing crown ethers have been prepared for use in selective alkali metal complexation studies. A highly preorganized, cage-functionalized cryptand also has been designed and has been synthesized for use as a selective Li+ complexant. The alkali metal picrate extraction profiles of these cage-functionalized crown ethers also have been studied. Novel cage-functionalized diazacrown ethers have been prepared for selective alkali metal complexation studies. Alkali metal picrate extraction experiments have been performed by using this new class of synthetic ionophores to investigate the effects of cage-annulation and the influence of N-pivot lariat sidearms upon their resulting complexation properties. Novel pyridyl containing calix[4]arene receptors were prepared. Analysis of their respective 1H NMR and 13C NMR spectra suggests that calix[4]arene moieties in the ligand occupy the cone conformation. The complexation properties of these host molecules were estimated by performing a series of alkali metal picrate extraction experiments. An optically active cage-functionalized crown ether which contains a binaphthyl moiety as the chiral unit was prepared. The ability of the resulting optically active crown ether to distinguish between enantiomers of guest ammonium ions (i.e., phenylethylamonium and phenylglycinate salts) in transport experiments was investigated. Hexacyclo[11.2.1.02,12.05,10.05,15.010,14]hexadeca-6,8-diene-4,11-dione was prepared from hexacyclo[7.4.2.01,9.03,7.04,14.06,15] pentadeca-10,12-diene-2,8-dione. Unanticipated …
Date:
August 1999
Creator:
Chong, Hyun-Soon
System:
The UNT Digital Library
Adhesion/Diffusion Barrier Layers for Copper Integration: Carbon-Silicon Polymer Films and Tantalum Substrates
The Semiconductor Industry Association (SIA) has identified the integration of copper (Cu) with low-dielectric-constant (low-k) materials as a critical goal for future interconnect architectures. A fundamental understanding of the chemical interaction of Cu with various substrates, including diffusion barriers and adhesion promoters, is essential to achieve this goal. The objective of this research is to develop novel organic polymers as Cu/low-k interfacial layers and to investigate popular barrier candidates, such as clean and modified tantalum (Ta) substrates. Carbon-silicon (C-Si) polymeric films have been formed by electron beam bombardment or ultraviolet (UV) radiation of molecularly adsorbed vinyl silane precursors on metal substrates under ultra-high vacuum (UHV) conditions. Temperature programmed desorption (TPD) studies show that polymerization is via the vinyl groups, while Auger electron spectroscopy (AES) results show that the polymerized films have compositions similar to the precursors. Films derived from vinyltrimethyl silane (VTMS) are adherent and stable on Ta substrates until 1100 K. Diffusion of deposited Cu overlayers is not observed below 800 K, with dewetting occurred only above 400 K. Hexafluorobenzene moieties can also be incorporated into the growing film with good thermal stability. Studies on the Ta substrates demonstrate that even sub-monolayer coverages of oxygen or carbide on polycrystalline …
Date:
December 1999
Creator:
Chen, Li
System:
The UNT Digital Library
Synthesis and characterization of molecules to study the conformational barriers of fluorocarbon chains
Fluorocarbons are known to be stiffer than their hydrocarbon analogues, a property that underlines the extensive industrial application of fluorocarbon materials. Although there has been previous studies on the rotational barrier of molecules having fluorocarbon centers, a detailed systematic study is necessary to quantify flurocarbon stiffness. The molecules, Pyrene-(CF2)n-Pyrene, Pyrene-(CF2)n-F, Pyrene-(CH2)n-Pyrene and Pyrene-(CH2)n-H were therefore synthesized to enable the determination of the barrier to rotation of the carbon backbone in fluorocarbons. Conformational studies will be completed with steady-state and time-dependent emission spectroscopy.
Date:
May 2000
Creator:
Niyogi, Sandip
System:
The UNT Digital Library
The Performance of Silicon Based Sensor and its Application in Silver Toxicity Studies
The silicon based sensor is able to detect part per trillion ionic silver in 0.0098% hydrofluoric acid based on the open circuit potential (OCP) measurement. The OCP jump of 100 ppt ionic silver solution is up to 120 mV. The complex agent can effectively suppress the ionic silver concentration and suppress the OCP signal. The ability of complex agent to suppress the OCP signal depends on the formation constant of the complex with silver. The complex adsorbed on the sensor surface induces a second OCP jump, the height of the second jump depends on the formation constant of the complex. The MINEQL chemical equilibrium modeling program is used to calculate the ionic silver concentration when complex agent presents, a discrepancy is found between the MINEQL simulation result and the OCP signal of the silicon based sensor. The toxicity of ionic silver to C. dubia is studied parallel to the OCP signal of silicon based sensor. Less toxicity is found when the complex agent is present similar to the OCP signal. Another discrepancy is found between the MINEQL simulation and the toxicity test when MINEQL simulation is used to predict and control the ionic silver concentration. The data from both biosensor …
Date:
August 2000
Creator:
Peng, Haiqing
System:
The UNT Digital Library
Diffusion Barriers/Adhesion Promoters. Surface and Interfacial Studies of Copper and Copper-Aluminum Alloys
The focus of this research is to study the interaction between copper and the diffusion barrier/adhesion promoter. The behavior of copper sputter-deposited onto sputter-cleaned tantalum nitride is investigated. The data show that copper growth on tantalum nitride proceeds with the formation of 3-D islands, indicating poor adhesion characteristics between copper and Ta0.4N. Post-annealing experiments indicate that copper will diffuse into Ta0.4N at 800 K. Although the data suggests that Ta0.4N is effective in preventing copper diffusion, copper's inability to wet Ta0.4N will render this barrier ineffective. The interaction of copper with oxidized tantalum silicon nitride (O/TaSiN) is characterized. The data indicate that initial copper depositions result in the formation a conformal ionic layer followed by Cu(0) formation in subsequent depositions. Post-deposition annealing experiments performed indicate that although diffusion does not occur for temperatures less than 800 K, copper "de-wetting" occurs for temperatures above 500 K. These results indicate that in conditions where the substrate has been oxidized facile de-wetting of copper may occur. The behavior of a sputter-deposited Cu0.6Al0.4 film with SiO2 (Cu0.6Al0.4/SiO2) is investigated. The data indicate that aluminum segregates to the SiO2 interface and becomes oxidized. For copper coverages less than ~ 0.31 ML (based on a Cu/O …
Date:
August 2000
Creator:
Shepherd, Krupanand Solomon
System:
The UNT Digital Library
Synthesis and characterization of molecules for electron transfer research.
Dimethoxynaphthalene (donor) and quinone (acceptor) have been chosen as a suitable redox pair and are bonded to either permethylated silane chains or corresponding permethylated alkyl chains to form Acceptor-(Bridge)-Donor molecules. The idea that the s-delocalization phenomenon of silane chains may greatly facilitate ET reactions will be tested. The starting material for the donor precursor, 4-(1,4-dimethoxynaphthyl)bromocyclohexane, was 1,4-naphthoquinone. After methylation and bromination, the Grignard reagent of the resulting bromide was reacted with cyclohexanedione, mono ethylene ketal. The resulting alcohol was changed to the donor precursor through the following functional group transformation steps: dehydration, hydrogenation, deketalization and bromination. 1,4-Dibenzyloxybromobenzene, the precursor for the acceptor, was synthesized from 1,4-hydroquinone through bromination and benzylation. The connection of the two precursors and either permethylated silane chains or permethylated alkyl chains will give the final target molecules for ET research. Progress on this is included.
Date:
December 2000
Creator:
Xiao, Wu
System:
The UNT Digital Library
An NMR study of 2-ethyl-1-butyllithium and of 2-ethyl-1-butyllithium/lithium 2-ethyl-1-butoxide mixed aggregates
A 1H, 13C, and 6Li NMR study of 2-ethyl-1-butyllithium indicated that 2-ethyl-1-butyllithium exists only as a hexameric aggregate over the entire temperature range of 25 to - 92.1 ° C in cyclopentane. Reacting 2-ethyl-1-butyllithium with 2-ethyl-1-butanol resulted in alkyllithium/lithium alkoxide mixed aggregates, apparently of the form Ra(RO)bLia+b. A multinuclear, variable temperature NMR study of samples with O:Li ratios of 0.2 and 0.4 showed, in addition to the alkyllithium, the formation of four mixed aggregates, one of them probably an octamer. Higher O:Li ratio samples showed the formation of several other mixed aggregates. Mixing 2-ethyl-1-butyllithium with independently prepared lithium 2-ethyl-1-butoxide formed the same mixed aggregates formed by in situ synthesis of lithium alkoxide. Lithium 2-ethyl-1-butoxide also exists as aggregates in cyclopentane.
Date:
May 2001
Creator:
Ferreira, Aluisio V. C.
System:
The UNT Digital Library
Thermochemical Study of Crystalline Solutes Dissolved in Ternary Hydrogen-Bonding Solvent Mixtures
The purpose of this dissertation is to investigate the thermochemical properties of nonelectrolyte solutes dissolved in ternary solvent mixtures, and to develop mathematical expressions for predicting and describing behavior in the solvent mixtures. Forty-five ternary solvent systems were studied containing an ether (Methyl tert-butyl ether, Dibutyl ether, or 1,4-Dioxane), an alcohol (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, or 2-Methyl-1-propanol), and an alkane (Cyclohexane, Heptane, or 2,2,4-Trimethylpentane) cosolvents. The Combined NIBS (Nearly Ideal Binary Solvent)/Redlich-Kister equation was used to assess the experimental data. The average percent deviation between predicted and observed values was less than ± 2 per cent error, documenting that this model provides a fairly accurate description of the observed solubility behavior. In addition, Mobile Order theory, the Kretschmer-Wiebe model, and the Mecke-Kempter model were extended to ternary solvent mixtures containing an alcohol (or an alkoxyalcohol) and alkane cosolvents. Expressions derived from Mobile Order theory predicted the experimental mole fraction solubility of anthracene in ternary alcohol + alkane + alkane mixtures to within ± 5.8%, in ternary alcohol + alcohol + alkane mixtures to within ± 4.0%, and in ternary alcohol + alcohol + alcohol mixtures to within ± 3.6%. In comparison, expressions derived from the Kretschmer-Wiebe model and the Mecke-Kempter …
Date:
May 2001
Creator:
Pribyla, Karen J.
System:
The UNT Digital Library
Substitution chemistry of the cobalt complexes RCCo3(CO)9 (R = H, CHO) with the diphosphine ligand: 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd). Syntheses, X-ray structures and reactivity.
The reaction between the tetrahedrane cluster RCCo3(CO)9{R = CHO (1), H (3)} and the redox-active diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3- dione (bpcd) leads to the replacement of two CO groups and formation of RCCo3(CO)7(bpcd) {R = CHO (2), H (4)}. Clusters 2 and 4 are thermally unstable and readily transform into the new P-C bond cleavage cluster 5. All three clusters 2, 4, and 5 have been isolated and fully characterized in solution by IR and 31P NMR spectroscopy. VT 31P NMR data indicate that the bpcd ligand in RCCo3(CO)7(bpcd) is fluxional at 187 K in THF. Clusters 2, 4, and 5 have been structurally characterized by X-ray diffraction analyses.
Date:
December 2001
Creator:
Liu, Jie
System:
The UNT Digital Library
Metal-Aluminum Oxide Interactions: Effects of Surface Hydroxylation and High Electric Field
Metal and oxide interactions are of broad scientific and technological interest in areas such as heterogeneous catalysis, microelectronics, composite materials, and corrosion. In the real world, such interactions are often complicated by the presence of interfacial impurities and/or high electric fields that may change the thermodynamic and kinetic behaviors of the metal/oxide interfaces. This research includes: (1) the surface hydroxylation effects on the aluminum oxide interactions with copper adlayers, and (2) effects of high electric fields on the interface of thin aluminum oxide films and Ni3Al substrate. X-ray photoelectron spectroscopy (XPS) studies and first principles calculations have been carried out to compare copper adsorption on heavily hydroxylated a- Al2O3(0001) with dehydroxylated surfaces produced by Argon ion sputtering followed by annealing in oxygen. For a heavily hydroxylated surface with OH coverage of 0.47 monolayer (ML), sputter deposition of copper at 300 K results in a maximum Cu(I) coverage of ~0.35 ML, in agreement with theoretical predictions. Maximum Cu(I) coverage at 300 K decreases with decreasing surface hydroxylation. Exposure of a partially dehydroxylated a-Al2O3(0001) surface to either air or 2 Torr water vapor results in recovery of surface hydroxylation, which in turn increases the maximum Cu(I) coverage. The ability of surface hydroxyl …
Date:
December 2001
Creator:
Niu, Chengyu
System:
The UNT Digital Library
NMR study of 2-ethylhexyllithium aggregate and 2- ethylhexyllithium/lithium 2-ethyl-1-hexoxide mixed aggregates.
A 1H, 13C, and 6Li NMR study of 2-ethylhexyllithium showed that 2- ethylhexyllithium exists solely as a hexamer in cyclopentane solution over the temperature range from 25 to -65 °C. Furthermore, 2-ethylhexyllithium and lithium 2- ethyl-1-hexoxide were shown to form mixed aggregates when the alkoxide was formed in situ by reacting 2-ethylhexyllithium with 2-ethyl-1-hexanol. A multinuclear, variable temperature NMR study of a sample with an O:Li ratio of 0.2 led to the identification of at least four such aggregates, one of which was found to be a hexamer with the composition R5(RO)Li6. Studies of samples with higher O:Li ratios, up to 0.8, showed additional mixed aggregates present. All solutions containing mixed aggregates were also shown to contain hydrocarbon soluble lithium hydride. A study of lithium 2-ethyl-1- hexoxide indicated that it aggregates in solution as well.
Date:
December 2001
Creator:
Petros, Robby A.
System:
The UNT Digital Library
The preparation and characterization of thermo-sensitive colored hydrogel film and surfactant-free porous polystyrene three-dimensional network.
Polymer hydrogel films change their properties in response to environmental change. This remarkable phenomenon results in many potential applications of polymer hydrogel films. In this thesis colored thermo-sensitive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel film was prepared by firstly synthesizing polymer latex and secondarily crosslinking the nanoparticles and casting the polymers onto glass. The shape-memory effect has been observed when changing the environmental temperature. The temperature-dependent of turbidity of polymer hydrogel film was measured by HP UVVisible spectrophotometer. This intelligent hydrogel might be used in chemomechanical systems and separation devices as well as sensors. Polymer adsorption plays an important role in many products and processes. In this thesis, surfactant-free three-dimensional polystyrene (PS) nanoparticle network has been prepared. The infrared spectroscopy and solubility experiment are performed to prove the crosslinking mechanism, also the BET method was used to measure the adsorption and desorption of polystyrene network. The BET constant (C) is calculated (C=6.32). The chemically bonded polymer nanoparticle network might have potential applications as catalyst or used for chromatographic columns.
Date:
December 2001
Creator:
Zhou, Bo
System:
The UNT Digital Library
Synthesis of Crown Ether/Ammonium Salt for Electron Transfer Study
The theoretical model of Beratan and Onuchic predicts a large attenuation of ET rates through hydrogen bonds; however, the effect of individual hydrogen bond on electron transfer reaction has not been systematically studied. The organic complexes in this study are a series of crown ether/ammonium salt, which incorporate a redox partner on each component of the complex. The dimethoxynaphthalene redox donor was attached to the crown ether and a series of ammonium salts was synthesized which bear substituted quinone and naphthoquinone acceptor. The complexes characterization and preliminary electron transfer rate measurement were completed with UV/Vis and steady-state emission spectroscopy.
Date:
May 2002
Creator:
Han, Dong
System:
The UNT Digital Library
Kinetic Studies of Hydroxyl and Hydrogen Atom Reactions
Gas phase kinetics of the reactions involving hydroxyl radical and hydrogen atom were studied using experimental and ab initio theoretical techniques. The rate constant for the H + H2S reaction has been measured from 298 to 598 K by the laser photolysis/resonance fluorescence (LP-RF) technique. The transition state theory (TST) analysis coupled with the measurements support the suggestion that the reaction shows significant curvature in the Arrhenius plot. The LP-RF technique was also used to measure the rate constant of the H + CH3Br reaction over the temperature range 400-813 K. TST and density functional theory (DFT) calculations show that the dominant reaction channel is Br-abstraction. The reaction H + CF2=CF-CF=CF2 was first studied by flash photolysis/resonance fluorescence (FP-RF) method. The experiments of this work revealed distinctly non-Arrhenius behavior, which was interpreted in terms of a change in mechanism. DFT calculations suggest that the adduct is CF2H-CF•-CF=CF2. At lower temperatures a mixture of this molecule and CF2•-CFH-CF=CF2 is likely. The theoretical calculations show that H atom migrates in the fluoroethyl radicals through a bridging intermediate, and the barrier height for this process is lower in the less fluorinated ethyl radical. High level computations were also employed in studies of the …
Date:
May 2002
Creator:
Hu, Xiaohua
System:
The UNT Digital Library
An Analysis of the Effectiveness of Computer Assisted Instruction in General Chemistry at an Urban University.
The science-major General Chemistry sequence offered at the University of Houston has been investigated with respect to the effectiveness of recent incorporation of various levels of computer technology. As part of this investigation, questionnaire responses, student evaluations and grade averages and distributions from up to the last ten years have been analyzed and compared. Increased use of web-based material is both popular and effective, particularly with respect to providing extra information and supplemental questions. Instructor contact via e-mail is also well-received. Both uses of technology should be encouraged. In contrast, electronic classroom presentation is less popular. While initial use may lead to improved grades and retention, these levels decrease quickly, possibly due to a reduction in instructor spontaneity.
Date:
May 2002
Creator:
McGuffey, Angela
System:
The UNT Digital Library
Fluorination Effect on the Conformational Properties of Alkanes
A Series of fluorophores of the general formular P(CF2)nP and P(CF2)n-1CF3 has been synthesized. Copper catalyzed coupling of 1-bromopyrene and the corresponding mono and di-iodoperfluoroalkanes were used in most cases. For the n=3 dimer, a novel 1,w-perfluoroalkylation of pyrene via bis-decarboxylation of hexafluorogultaric acid was utilized. These compounds, along with suitable hydrocarbon analogs, are being used to study the flexibility of fluorocarbon chains using emission. We have found that the excimer formation for the fluorinated pyrene monomers is highly dependent on concentration and is less efficient than for pyene. Excimer formation for the fluorinated pyrene dimers is much more efficient than for the fluorocarbon monomers and is only slightly concentraion dependent. Steady-state emission spectra indicate hydrocarbon dimers-models form excimers more efficiently than the fluorinated dimers suggesting the fluorinated chains are stiffer than the hydrocarbons. We conducted the temperature-dependent studies and quantified the conformational difference.
Date:
May 2002
Creator:
Xu, Wenjian
System:
The UNT Digital Library
A Computational Study on 18+δ Organometallics
The B3LYP density functional has been used to calculate properties of organometallic complexes of Co(CO)3 and ReBr(CO)3, with the chelating ligand 2,3-bisphosphinomaleic anhydride, in 19- and 18-electron forms. The SBKJC-21G effective core potential and associated basis set was used for metals (Co/Re) and the 6-31G* basis set was used for all other elements. The differences of bond angles, bond distances, natural atomic charges and IR vibrational frequencies were compared with the available experimental parameters. The differences between the 19- and 18-electron systems have been analyzed. The results reveal that the 19th electron is mostly distributed over the ligand of 2,3-bisphosphinomaleic anhydride, although partially localized onto the metal fragment in 1 and 2*. Two different methods, IR-frequencies and natural atomic charges, were used to determine the value of δ. Present computed values of δ are compared with available experimental values, and predictions are made for unknown complexes.
Date:
May 2002
Creator:
Yu, Liwen
System:
The UNT Digital Library
NMR Study of n-Propyllithium Aggregates
A variable temperature 1H, 13C, and 6Li NMR study of n-propyl-6Li-lithium showed five different aggregates, similar to that in the literature as (RLi)n, n= 6, 8, 9, 9, 9. There were also a number of additional new species, identified as lithium hydride containing aggregates. Unexpectedly, a series of 13C{1H} 1-D NMR experiments with selective 6Li decoupling showed evidence for 13C-6Li spin-spin coupling between the previously reported (RLi)n aggregates and various hydride species.
Date:
December 2002
Creator:
Davis, James W.
System:
The UNT Digital Library
Synthesis and host-guest interaction of cage-annulated podands, crown ethers, cryptands, cavitands and non-cage-annulated cryptands.
Symmetrical cage-annulated podands were synthesized via highly efficient synthetic strategies. Mechanisms to account for the key reaction steps in the syntheses are proposed; the proposed mechanisms receive support from the intermediates that have been isolated and characterized. An unusual complexation-promoted elimination reaction was studied, and a mechanism is proposed to account for the course of this reaction. This unusual elimination may generalized to other rigid systems and thus may extend our understanding of the role played by the host molecules in "cation-capture, anion-activation" via complexation with guest molecules. Thus, host-guest interaction serves not only to activate the anion but also may activate the leaving groups that participate in the complexation. Complexation-promoted elimination provides a convenient method to desymmetrize the cage while avoiding protection/deprotection steps. In addition, it offers a convenient method to prepare a chiral cage spacer by introducing 10 chiral centers into the host system in a single synthetic step. Cage-annulated monocyclic hosts that contain a cage-butylenoxy spacer were synthesized. Comparison of their metal ion complexation behavior as revealed by the results of electrospray ionization mass spectrometry (ESI-MS), alkali metal picrate extraction, and pseudohydroxide extraction with those displayed by the corresponding hosts that contain cage-ethylenoxy or cage-propylenoxy spacers reveals …
Date:
May 2003
Creator:
Chen, Zhibing
System:
The UNT Digital Library
Synthesis and characterization of 2-chloro-3-benzylthiopyrrolo[1,2-a]- benzimidazol-1-one and 2,3-di(benzylthio)pyrrolo[1,2-a]benzimidazol-1-one.
The reaction between o-phenylenediamine and 2,3-dichloromaleic anhydride has been probed and found to give 2,3-dichloropyrrolo[1,2-a]- benzimidazol-1-one as the major product. Chlorine substitution in 2,3-dichloropyrrolo[1,2-a]benzimidazol-1-one by added benzylthiol occurs in the presence of pyridine to provide the corresponding monosulfide and disulfide derivatives. The first benzylthiol ligand undergoes reaction at the C-3 position of the five-membered pyrrolo-1-one ring, with the addition of the second benzylthiol ligand occurring at the remaining chlorine-substituted carbon. The mono- and disulfide derivatives have been isolated and characterized in solution by NMR, IR, and UV-vis spectroscopies, and the solid-state structure of 2,3-di(benzylthio)pyrrolo[1,2-a]benzimidazol-1-one has been established by X-ray crystallography.
Date:
December 2003
Creator:
Huang, Shih-Huang
System:
The UNT Digital Library
Investigation of the Pressure Dependence of SO3 Formation
The kinetics of the pressure dependent O + SO2 + Ar reaction have been investigated using laser photolysis resonance fluorescence at temperatures of 289 K, 399 K, 581 K, 699 K, 842 K and 1040 K and at pressures from 30-665 torr. Falloff was observed for the first time in the pressure dependence. Application of Lindemann theory yielded an Arrhenius expression of k(T) = 3.3 x 10-32exp(-992/T) cm6 molecule-1 s-1 for the low pressure limit and k(T) = 8.47 x 10-14exp(-468/T) cm3 molecule-1 s-1 for the high pressure limit at temperatures between 289 and 842 K. The reaction is unusual as it possesses a positive activation energy at low temperature, yet at higher temperatures the activation energy is negative, illustrating a reaction barrier.
Date:
December 2003
Creator:
Naidoo, Jacinth
System:
The UNT Digital Library
Electrochemical synthesis of CeO2 and CeO2/montmorillonite nanocomposites.
Nanocrystalline cerium oxide thin films on metal and semiconductor substrates have been fabricated with a novel electrodeposition approach - anodic oxidation. X-ray diffraction analysis indicated that as-produced cerium oxide films are characteristic face-centered cubic fluorite structure with 5 ~ 20 nm crystal sizes. X-ray photoelectron spectroscopy study probes the non-stoichiometry property of as-produced films. Raman spectroscopy and Scanning Electron Microscopy have been applied to analyze the films as well. Deposition mode, current density, reaction temperature and pH have also been investigated and the deposition condition has been optimized for preferred oriented film formation: galvanostatic deposition with current density of -0.06 mA/cm2, T > 50oC and 7 < pH < 10. Generally, potentiostatic deposition results in random structured cerium oxide films. Sintering of potentiostatic deposited cerium oxide films leads to crystal growth and reach nearly full density at 1100oC. It is demonstrated that in-air heating favors the 1:2 stoichiometry of CeO2. Nanocrystalline cerium oxide powders (4 ~ 10 nm) have been produced with anodic electrochemical synthesis. X-ray diffraction and Raman spectroscopy were employed to investigate lattice expansion phenomenon related to the nanoscale cerium oxide particles. The pH of reaction solution plays an important role in electrochemical synthesis of cerium oxide films …
Date:
December 2003
Creator:
Wang, Qi
System:
The UNT Digital Library
Studies in regiospecific oxidation reactions of 1-methyl-pentacyclo[5.4.0.02,6.03,10.05,9]undecane-8,11-dione.
Baeyer-Villiger oxidation of 1-methylpentacyclo[5.4.0.02,6.03,10.05,9] undecane-8,11-dione, performed by using m-chloroperbenzoic acid in 1:1 molar ratio, resulted in the formation of monolactone. The corresponding dilactone, was synthesized by reacting 1-methyl-PCU-8,11-dione with m-chloroperbenzoic acid in 1:2 molar ratio. 6-Methyl-1,4,4a,8a-tetrahydro-1,4-methanonaphthalene-5,8-dione was converted into the corresponding exo-6,7-monoepoxide via treatment with 30% aqueous hydrogen peroxide. Epoxidation of this monoepoxide by using m-chloroperbenzoic acid afforded the corresponding bis-epoxide. Ceric ammonium nitrate (CAN) promoted oxidation of 1-methyl-PCU-8,11-dione afforded "methylated lactones" and a "methylated alkene."
Date:
May 2004
Creator:
Vappala, Indu
System:
The UNT Digital Library
Thermodynamics of Mobile Order Theory: Solubility and Partition Aspects
The purpose of this thesis is to analyze the thermochemical properties of solutes in nonelectrolyte pure solvents and to develop mathematical expressions with the ability to describe and predict solution behavior using mobile order theory. Solubilities of pesticides (monuron, diuron, and hexachlorobenzene), polycyclic aromatic hydrocarbons (biphenyl, acenaphthene, and phenanthrene), and the organometallic ferrocene were studied in a wide array of solvents. Mobile order theory predictive equations were derived and percent average absolute deviations between experimental and calculated mole fraction solubilities for each solute were as follows: monuron in 21 non-alcoholic solvents (48.4%), diuron in 28 non-alcoholic solvents (60.1%), hexachlorobenzene (210%), biphenyl (13.0%), acenaphthene (37.8%), phenanthrene (41.3%), and ferrocene (107.8%). Solute descriptors using the Abraham solvation model were also calculated for monuron and diuron. Coefficients in the general solvation equation were known for all the solvents and solute descriptors calculated using multilinear regression techniques.
Date:
August 2004
Creator:
De Fina, Karina M.
System:
The UNT Digital Library