A variable temperature ^13 C and ^199 Hg NMR study has been conducted for diphenyl-, bis(o-tolyl)-, bis(m-tolyl)-, and bis(2, 6-xylyl)mercury in dimethyl sulfoxide and 1,1,2,2 tetrachloroethane; ^13 C T1 relaxation times are reported as a function of temperature. Barriers to rotation of the aryl rings are obtained. Chemical shifts and couplings in CDCl_3 are given for bis(p-tolyl)-, bis(2, 5-xylyl)-, bis(mesityl)-,phenyl(o-tolyl)-, phenyl(m-tolyl)mercury, and the compounds listed above. The steric interactions of these aryl mercury compounds are discussed.

The research reported here is a study of detector systems to determine those most suited for simultaneous organic acid, inorganic anion determination. Comparisons are made on the basis of detection limits and sensitivities for conductivity, UV/Vis, photoconductivity, and derivative conductivity detection systems. The investigation was made using a constant chromatographic system with the only variable component being the detector system. Eluant optimization conditions for each detector are reported along with tables reporting detection limits and sensitivities for each detector system. Various chromatograms are also shown to provide a visual comparison between detector results.

The structures of Diels-Alder cycloaddition of cyclopentadiene to 2,6-dimethyl-p-benzoquinone and methylcyclopentadiene to 2,6-dimethyl-p-benzoquinone were assigned by analysis of 1-D and 2-D proton and carbon-13 NMR spectra. The structures of the cycloadduct of methylcyclopentadiene to 2,6-dimethyl-p-benzoquinone and that of the corresponding intramolecular [2+2] photocyclization product were also obtained by single crystal X-ray structural analysis. As the second part of the study, a new polycyclic "cage" molecule, a substituted trishomocubane isomer, was synthesized. In this synthesis, reductive bond cleavage followed by Dieckmann condensation was employed. Wolff-Kishner reduction then was used to convert a β-keto ester "cage" molecule to the corresponding carboxylic acid. A compound that possesses twofold symmetry was isolated from reaction product mixture. The structure of this compound has been established by single crystal X-ray crystallography.

This student is interested in reinvestigating the kinetics and mechanism of the bridged compound in l,2-dichloroethane with triisopropyl phosphite and in finding the reasons why the values of competition ratio k₋₂ /k₃ in this reaction are so large.

There are 150 million tons of Municipal Solid Waste (MSW) annually produced in the United States, which is approximately equivalent to 150 million barrels of oil. MSW production is inexhaustible, and is increasing on an annual per capita basis of approximately three per cent. After controlling the moisture and adding a binder, the combustible portion of MSW was converted to pellets. The objects of this project were to 1) evaluate the binder, 2) prepare the pellets, and 3) evaluate the pellets with regard to density. The manufacture of pellets was conducted at the Naval Air Station, Jacksonville, Florida. The evaluation of the binders and the pellets was done at North Texas State University (NTSU). There were three procedures for measuring the density. The first, using water displacement, was from the American Society for Testing and Material (ASTM). The second, using wax coating, was also from ASTM. The third, using sharply-cut cylindrical pellets, was developed at NTSU.

This investigation is concerned with determining whether a carbon substituent or a silicon substituent on the carbon terminus of a silicon-carbon double bond has a more stabilizing effect. Two different 2-substituted silaethylenes were generated at the same time by pyrolyzing 1, 1-dimethyl-2-neopentyl-4- (dimethylalkoxysilyl) silacyclobutanes in a nitrogen flow system. The results of these pyrolyses, both neat and in the presence of a trapping reagent, show that the silaethylene with a silicon substituent on the carbon terminus was favored approximately two to one over the silaethylene with a carbon substituent. This datum, along with other observations and hypotheses discussed, leads to the suggestion that the silicon substituenton the carbon terminus of the silaethylene bond has a more stabilizing effect than the carbon substituent.

A sodium fusion-Ion chromatographic method for determination of fluorine, chlorine, bromine, and iodine in organic compounds is described. Seventeen organic halogen compounds and eleven mixtures were decomposed by Na fumes at 280-290°C for one hour or longer. The absorbing solutions were injected for ion chromatographic analysis using electrochemical and conductometric detectors. The arrangement of the apparatus includes the placement of the electrochemical and conductometric detectors. This method provides a mechanism providing for complete analysis for all four halogens in one ion chromatographic sample injection. Reproducibility is excellent and liquid sample handling is mentioned.

The conformational energy differences have been determined for ethylene glycol, 2- chloroethanol, and 2,2- dichloroethanol in the neat liquid, DMSO, and H20 with Raman spectroscopy. Spectra in the 0-H valence region were utilized to determine the energy difference between interand intramolecularly hydrogen bonded species. It was found that the solvent effect on the relative stabilities of the gauche and trans rotamers of the alcohols differ significantly. The results also indicate that, unlike ethylene glycol, there is significant intramolecular hydrogen bond formation in the halogenated alcohols in the neat liquid phase. Stronger intramolecular hydrogen bond formation was observed in dichloroethanol than in 2-chloroethanol.

The reactivity of the [(Phen)Cr(CO)_3] intermediate with phosphines and phosphites (L) has been investigated through ligand-competition studies. This intermediate possesses virtually no ability to discriminate among L. The agreement between reactivity data for the thermal and photochemically-generated intermediates indicates that the same intermediate is produced via each process. Pulsed laser flash photolysis of (n^2-NP)M(CO)_4 (I) (M = Cr, Mo; NP = 1-diethylamino-2-diphenylphosphinoethane) in the absence and presence of P (OPr-i)_3 (L) in 1,2-dichloroethane and chlorobenzene induces unimolecular ring-opening to afford [(n^1-NP)M(CO)_4] (II), in which the bidentate ligand is coordinated through P. Reaction of this intermediate takes place through competitive ring-reclosure and attack at (II) by L to afford (I) and cis-(n^1-NP) (L)M(CO)_4.

The synthesis and insecticidal activity of certain alcohols (hydroxymethyldibenzofurans, hydroxymethyldibenzothiophenes and some of their ⍺-cyano derivatives), esterified with trans-chrysanthemic acid, were investigated. The preparation of these planar alcohol moieties was undertaken to study conformation-activity effects in insecticides of the pyrethroid type. The synthesis of final ester products employed two methods. One was the direct condensation of the appropriate alcohol with chrysanthemic acid chloride in the presence of pyridine. The other involved the in situ formation of the cyanohydrin from the appropriate aldehyde and subsequent condensation with chrysanthemic acid chloride in the presence of a phase transfer reagent. Insecticidal activity is to be tested at rates of 0.001, 0.01, 0.1, 10, 100, and 1000 ppm. Fenvalerate is used as the standard against Diabrotica undecimpuntata (spotted cucumber beetles).

The synthetic studies include the synthesis of the cyclic siloxydiyne, 3,3,5,5,8,8,10,10-octamethyl-4,9-dioxa-3,5,8,10-tetrasilacyclodeca-1,6- diyne [VI] and its novel iron carbonyl complex. In the preparation of [VI] by HBr promoted condensation of bis (methoxydimethylsilyl) acetylene, a minor product, a cyclic trimer was always formed along with the major product [VI]. No evidence of an equilibrium between the trimerization product and the dimerization product was found. Compound [VI] can react with iron carbonyl reagents to produce a novel binuclear iron complex of trimethylenemethane [VII] in very low yield either in a thermal or photo-reaction. The key step proposed by us in the formation of [VII] is a I,2-silyl shift in a complexed bis (silyl) acetylene to form a vinylidene intermediate. Experiments aimed at isolating this intermediate were not successful.

The synthesis of a novel, cage spiro-oxetane was carried out. Pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane-8- one (PCUD-8-one) undergoes one-carbon homologation to a mixture of endo- and exo- PCUD-carboxaldehydes which then are converted into 8,8-bis(hydroxymethyl)PCUD. The monotosylate obtained via reaction of 8,8- bis(hydroxymethyl)PCUD with tosyl chloride(1 equivalent) reacts with sodium hydride to afford the corresponding spiro-oxetane via intramolecular Williamson reaction. Six new substituted heptacyclo[6.6.0.0^2,6.0^3,13.0^4,11. 0^5,9.0^10,14]tetradecanes (HCTD) were synthesized. These compounds will be used as substrates in a photoelectron spectroscopic study. The ring-expansion reaction of PCUD-8-one with ethyl diazoacetate in the presence of BF_3:OEt_2 was performed. The major product was converted into an alcohol, and the structure of the 3,5-dinitrobenzoate of this alcohol was elucidated by single crystal x-ray structural analysis.

This paper describes a new technique for analyzing fire debris using nuclear magnetic resonance (NMR) spectroscopy. Petroleum distillates, which are commonly used accelerants, were weathered, burned, and steamdistilled. These, as well as virgin samples of the accelerants, were analyzed by gas chromatography and nuclear magnetic resonance spectroscopy. In addition, solvent studies and detectibility limit studies were conducted. The use of NMR is described as a valuable adjunct to the existing methods of analysis.

We report the attempted syntheses of two photochemical dimethylsilene precursors, both of which are derived from polyphenyl silanorbornadiene skeletons. Possible synthetic schemes and our results are reported herein. Photolysis of 1,2-divinyl-1,1,2,2-tetramethyl-1,2-disilane at room temperature in a cyclohexane solution of 1,3-butadiene produces 1,1-dimethyl-2-(vinyldimethylsilylmethyl) silene which is trapped in high yields to afford the E- and Z-1,1-dimethyl-2-(vinyldimethylsilylmethyl)-3-vinyl-1-silacyclobutanes in 42 and 29% yields, respectively, along with minor amounts of 1,1-dimethyl-2-(vinyldimethylsilylmethyl)-1-silacyclohex-3-ene, 9%. Low Pressure Flow Pyrolysis at 450º C of either the E- or Z-isomer provides a relatively mild thermal source of the silene in the gas phase. Two products, 1,1,3,3-tetramethyldisilacyclohex-3-ene and 2,2,5,5-tetramethyl-2,5-disilabicyclo[2.2.1]hexane, are formed from an intramolecular rearrangement of the silene. Other reactions of the 3-vinylsilacyclobutanes include geometric isomerization, ring expansion to the silacyclohex-3-ene, and a homodienyl-1,5-hydrogen shift to 3,3,6,6-tetramethyl-3,6-disiladeca-1,4,8-triene. Synthetic schemes, successful and unsuccessful, for hydrido silene, acylpolysilene, and fluorine substituted silene precursors are discussed in the final chapter.

The laser Raman spectra of tetrachlorocyclopropene in the liquid and solid phases have been recorded and vibrational assignments are presented. These results along with root mean squared vibrational amplitudes from electron diffraction data have been employed in a normal coordinate analysis in which a 19 parameter potential function is refined. This potential function, originally expressed in terms of compliance constants, is then used to derive the corresponding conventional and relaxed force constants.

The synthesis and insecticidal activity of a series of 2,2-dicyano cyclopropane carboxylic acids, (3-phenoxyphenyl)- methyl esters were investigated. Synthesis of the compounds was accomplished by reaction of a dimethyl sulfonium carbethoxy ylide with propanedinitrile alkylidene compounds. Final products were formed in one step by use of the (3-phenoxyphenyl)-methyl ester of the ylide. Insecticidal activity was determined at 500 ppm application with Permethrin as the standard against houseflies, mexican bean beetles, and southern army worms.

The substitution reaction of (DTN)W2 (CO)10 with P(OCH(CH3 )2 )3 is a stepwise reaction. The kinetics of step 1 follow the equation: -d[substrate] /dt = kld [substrate] + k la [substrate] [ligand]. Thus the mechanism of step 1 is expected to be a competition between dissociative and associative pathways. The kinetics of step 2 follow the equation: -d[(DTN)W(CO)5]/dt = k2dk3[(DTN)W(CO)5][ligand]/k-2[DTN] + k3[ligand] The plot of kobsd versus [ligand] thus is a hyperbolic curve and the plot of 1/kobsd versus 1/[L] exhibits linear behavior. A mechanism for step 2 in which (DTN)W(CO)5 dissociates to an intermediate, W(CO) 5 , and in which DTN and P(OCH(CH3 )2 )3 compete to associate with W(CO) 5 is favored. The dissociative rate constant of the first step, kld' is about 1.2 times of that of the second step, k2d. The dissociation of (DTN)W(CO) 5 from (DTN)W2 (CO) 1 0 is favored over the dissociation of DTN from (DTN)W(CO) 5 due to a combination of the steric, stoichiometric, charge repulsion and entropy effects of the reaction.

(1). An improved method for synthesizing bicyclo (2,2,1) hepta-2,5-diene-7-spiro-1'-cyclopentane (5) has been developed. Thermal reaction of compound (5) with neat iron pentacarbonyl under nitrogen atmosphere affords the corresponding cage dimer (6). Some aspects of the syntheses, spectra, and chemistry of compound (5) and (6) are discussed. (2). A structure isomer of decamethyldodecahedrane (C₃₀H₄₀), molecule (11), is expected to be synthesized via thermal reaction of iron carbonyl complexes with compound (10). An intermediate in this synthesis, 2,2- tetramethylene-1,4-dibromobutane (9) was efficiently synthesized starting from cyclopentanone. Some aspects of the syntheses, spectra, and chemistry of compound (1) to (9) will be discussed.

Lecithin:cholesterol acyltransferase (LCAT) was purified 30,000-fold from hog plasma in a homogeneous state as indicated by polyacrylamide gel electrophoresis. The purified enzyme had an apparent molecular weight of 66,000 and was found to contain about 21.4 percent (w/w) carbohydrate. The properties of hog LCAT including amino acid composition were compared with human LCAT. High density lipoprotein (HDL) was isolated from the hog plasma by an immunoaffinity column chromatography. The isolated HDL showed nearly identical lipid-protein composition although it contained additional protein components when it was compared to HDL isolated by a traditional method involving ultracentrifugation.

Trihalomethanes such as chloroform, dichlorobromomethane, dibromochloromethane, and bromoform are formed when natural water is chlorinated in water treatment. This investigation explores the use of ozone to remove organic precursors from natural water, thus decreasing trihalomethane formation potential. The data suggest a mechanism involving formation of secondary precursors after prolonged contact with ozone, suggesting that trihalomethane precursors may be minimized by using low doses of ozone and short contact time.

As part of a continuing study of the synthesis and chemistry of new, substituted pentacyclo(5.4.0.0²，⁶.0³，¹º.0⁵，⁹)undecanes, the following compounds have been synthesized: 1: X=O, Y=SiMe_3; 2: X=CH_2, Y=SiMe_3; 3: X=O, Y=Cl; 6: X=OAc, Y=H; 8: X=OC(O)Ph, Y=H; 9: X=OSO_2Ph, Y=H; 11: X=OH, Y=H; 12: X=OMe, Y=H; 14: X=CHSiMe_3, Y=SiMe_3; 15: X=OH, Y=Cl; 16: X=OAc, Y=Cl; 17: X=OMe, Y=Cl. An important objective of this work is to prepare new polycyclic cage compounds which can be utilized as intermediates for the synthesis of new, substituted tricyclopentanoid natural products (triquinanes) and related systems. Compounds 1-4 were identified as target molecules in this connection.

A variable temperature 13C and 6Li NMR study has been conducted for 6Li-enriched ethyl-, n-propyl-, isopropyl-, n-butyl-, isobutyl-, t-butyl--, isopentyl-, 2-ethylbutyl-, and n-hexyllithium in cyclopentane. Significant differences in the 13C NMR parameters are observed as a function of the alkyl group and temperature. These changes are compared to the 6Li spectra and explained in terms of the aggregates present. 13C-6Li coupling is readily observed in both the 13 6 C and Li spectra of compounds which contain branching at either the alpha or beta carbons of the alkyl group. This coupling has been used to identify the aggregates present in solution and to identify the fluxional behavior of these aggregates.

The Raman linewidths of the carbon-halogen stretching mode was measured as a function of temperature in ethyl bromide, isopropyl chloride, isopropyl bromide, t-butyl chloride, t-butyl bromide, chlorobenzene, bromobenzene, iodobenzene and o-dichlorobenzene. The vibrational relaxation times showed a very clear trend. Together with earlier work on methyl iodide, these results provide evidence that the vibrational dephasing efficiencies (T^-1_iso) of the carbon-halogen mode vary in the order of Cl > Br > I. Vibrational dephasing times were calculated from the Fischer-Laubereau Isolated Binary Collision Mode. If further work shows this transferability to extend to other types of skeletal modes in molecular systems, this would have significant ramifications on future vibrational lineshape studies.

The method utilizes both cation and anion concentrator columns in parallel as a preconcentration system. The preconcentrator system is loaded using a reagent delivery module operated for a specific time at a preset flow rate. Total injection volumes of 2-5 ml are routinely used. Various chromatograms are discussed along with detailed information concerning detection limits for sodium and chloride, the system operating conditions, and the solutions to other pitfalls which have arisen during the course of this work.