Pyrolysis-capillary gas chromatography combined with FID, ECD and MS detection were used to characterize refuse-derived fuel and aquatic fulvic acids. Different pyrolysis methods and programs were evaluated. Pyrolysis temperatures of 700-800°C produced the strongest signal for organics present in RDF and fulvic acid. Cellulose and fatty acids pyrolyzates were identifiable by GC-MS following preparative pyrolysis fractionation. At organic chloride content of 0.023%, only three halogenated compounds were detected in the GC-MS of the fractions. None of the priority pollutants were detected at lower detection limit of 0.72 to 24 mg/ kg RDF. Selective solvent extraction improves the reproduciblities of the technique and allows the detection of polymeric structures. Pyrograms of polyvinyl chloride and regular typing paper showed some common peaks that are present in the RDF pyrogram. About 65% of the peaks in the RDF pyrogram might be of paper origin. The organic chloride content of the RDF was evaluated by ion chromatography of the trapped pyrolyzates in 2% NaOH trap and it was found to be 221 mg Cl/ kg dry RDF. Pyrolysis conditions and temperature programs for FA were systematically evaluated. Samples included purified FA, methylated FA and HPLC separated fractions. Characteristic pyrograms were developed. Profiles of benzene, …

The reactions of diagonal and lateral Cp'Re(CO)2Br2 (where Cp' = n5-C5H5, n5-C5Me5) and (n5-CgH7)Re(CO)3 with reducing agents have been examined. Hydride reduction at -78 °C is observed to occur at the Cp ring in both CpRe(CO)2Br2 isomers, affording a thermally unstable [(n4 -C5Hg)Re(CO)2Br2]- complex. The product of hydride ring attack has been characterized by low-temperature IR and 1H NMR measurements in addition to 13C NOE and heteronuclear 2D NMR measurements. Reaction of lateral CpRe(CO)2Br2 with either MeLi or PhLi affords both Cp-ring attack and metalhalogen exchange, [CpRe(CO)2Br]- (1) while t-BuLi reacts exclusively via metal-halogen exchange. diag-CpRe(CO)2Br2 reacts with the above lithium reagents to yield the same metal-halogen exchange anion. Analogous reactions using diag- and lat-Cp*Re(CO)2Br2 (where Cp* = n5-CgMe5) afford only the corresponding rhenium metal-halogen exchange anion, [Cp*Re(CO)2Br] (2). The molecular structures of 1-[Li/15-Crown-5] and 2-PPP were established by X-ray crystallography. 1-[Li/15-Crown-5] crystallizes in the monoclinic space group P21 with a = 10.860(4) A, b = 13.116(5) A, c = 7.417(3) A, B = 105.26(3)0, V = 1018.7(3) A3 , and Z = 2. 2-PPP crystallizes in the orthorhombic space group Pbca with a = 20.646(5) A, b = 17.690(5) A, c = 17.553(3) A, and z = 8. Solution …

The synthetic studies include the synthesis of the cyclic siloxydiyne, 3,3,5,5,8,8,10,10-octamethyl-4,9-dioxa-3,5,8,10-tetrasilacyclodeca-1,6- diyne [VI] and its novel iron carbonyl complex. In the preparation of [VI] by HBr promoted condensation of bis (methoxydimethylsilyl) acetylene, a minor product, a cyclic trimer was always formed along with the major product [VI]. No evidence of an equilibrium between the trimerization product and the dimerization product was found. Compound [VI] can react with iron carbonyl reagents to produce a novel binuclear iron complex of trimethylenemethane [VII] in very low yield either in a thermal or photo-reaction. The key step proposed by us in the formation of [VII] is a I,2-silyl shift in a complexed bis (silyl) acetylene to form a vinylidene intermediate. Experiments aimed at isolating this intermediate were not successful.

Methods of determining the aqueous solubilities of twelve chlorinated benzenes were evaluated in pure and in different water matrices. In pure water, results were comparable with the calculated values. Higher chlorinated tetrachlorobenzenes (TeCBs), pentachlorobenzenes (PCBz), and hexachlorobenzenes (HCBs) gave better precision and accuracy than lower chlorinated monochlorobenzenes (MCBs), dichlorobenzenes (DCBs), or trichlorobenzenes (TCBs).

Thermal reactions and flash photolysis are used to study the olefin bond-migration promoted by tungsten carbonyls. Substitution of piperidine (pip) by 2- allylphenyldiphenylphosphine (adpp) in the cis-(pip)(η^1- adpp)W(CO)-4 complex was investigated, and no olefin bond-migration was observed. This suggests that a vacant coordinated site adjacent to the coordinated olefin is an essential requirement for olefin bond rearrangement. The rates of olefin attack on the photogenerated coordinatively unsaturated species, cis-[(CB)(η^1-ol- P)W(CO)-4] (CB = chlorobenzene, p-ol = Ph-2P(CH-2)-3CH=CH-2; n = 1-4) were measured. Kinetics data obtained both in pure CB and in CB/cyclohexane mixtures support a dissociative mechanism in which the W-CB bond is broken in the transition state. In contrast to results observed in studies of other related systems, no olefin bond-migration is noted. This observation is attributed to P-W coordination at all stages of the reaction, which precludes formation of a reactive intermediate containing a vacant coordination site adjacent to a P-ol bond.

During recent years most of the successful developments in pyrethroids have been primarily concerned with structural or compositional variations. As a part of our continuing interest in pyrethroid insecticides, nitrogen-containing compounds having pyrethroid-like structures were synthesized. Seven prolinate compounds, N-(substituted)-phenyl-prolinates and N-carbobenzoxy-prolinates were coupled with known pyrethroid alcohols. These structural variations which "locked in" a specific conformation between the nitrogen and chiral a-carbon in the acid moiety of fluvalinate were studied to determine the influence of certain conformations on insecticidal toxicity. The toxicity data for the prolinate compounds showed intermediate mortality against nonresistant cockroaches. It was concluded that the conformation imposed by the proline ring portion of the esters was probably close to the favored conformation for interaction of fluvalinate-like pyrethroids with the insect receptor site. A second series of nitrogen-containing compounds, twenty-five carbamate esters resulting from the condensation of N-isopropyl-(substituted)-anilines and N-alkyl-(substituted)-benzylamines with appropriate pyrethroid alcohols were studied for insecticidal activity. These studies were conducted on pyrethroid-susceptible houseflies. Some of the carbamate esters exhibited high toxicity when synergized by piperonyl butoxide. For example, the toxicity ( LD 50 ) of O-a-cyano-3-phenoxyfaenzyl-N-a,a-dimethyl-4-bromo-benzyl carbamate was 0.012 ug/g, which is significantly greater than that reported for the potent pyrethroid, fenvalerate. Correlations of …

The synthesis of a novel, cage spiro-oxetane was carried out. Pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane-8- one (PCUD-8-one) undergoes one-carbon homologation to a mixture of endo- and exo- PCUD-carboxaldehydes which then are converted into 8,8-bis(hydroxymethyl)PCUD. The monotosylate obtained via reaction of 8,8- bis(hydroxymethyl)PCUD with tosyl chloride(1 equivalent) reacts with sodium hydride to afford the corresponding spiro-oxetane via intramolecular Williamson reaction. Six new substituted heptacyclo[6.6.0.0^2,6.0^3,13.0^4,11. 0^5,9.0^10,14]tetradecanes (HCTD) were synthesized. These compounds will be used as substrates in a photoelectron spectroscopic study. The ring-expansion reaction of PCUD-8-one with ethyl diazoacetate in the presence of BF_3:OEt_2 was performed. The major product was converted into an alcohol, and the structure of the 3,5-dinitrobenzoate of this alcohol was elucidated by single crystal x-ray structural analysis.

One objective of this study was to explore the intramolecular [2+2] cycloadditions of phenoxyketenes to carbonyl groups with isoflavones and benzofurans as target compounds. The other objective was to investigate the eyeloaddition reactions of rarely studied aminoketenes. The conversion of 2-(carboxyalkoxy)benzils to the corresponding phenoxyketenes leads to an intramolecular [2+2] cycloaddition to ultimately yield isoflavones and/or 3-aroylbenzofurans. The product distributions are dependent upon the substitution pattern in the original benzil acids. The initial cycloaddition products, β-lactones, are isolated in some instances while some β-lactones spontaneously underwent decarboxylation and could not be isolated. The ketene intermediate was demonstrated in the intramolecular reaction of benzil acids or ketoacids with sodium acetate and acetic anhydride. It is suggested that sodium acetate and acetic anhydride could serve as a source for the generation of ketenes directly from certain organic acids. The treatment of ketoacids with acetic anhydride and sodium acetate provides a simpler procedure to prepare benzofurans than going through the acid chloride with subsequent triethylamine dehydrochlorination to give the ketenes. N-Ary1-N-alkylaminoketenes were prepared for the first time from the corresponding glycine derivatives by using p-toluenesulfonyl chloride and triethylamine. These aminoketenes underwent in situ cycloadditions with cyclopentadiene, cycloheptene and cyclooctenes to yield only the …

The structures of Diels-Alder cycloaddition of cyclopentadiene to 2,6-dimethyl-p-benzoquinone and methylcyclopentadiene to 2,6-dimethyl-p-benzoquinone were assigned by analysis of 1-D and 2-D proton and carbon-13 NMR spectra. The structures of the cycloadduct of methylcyclopentadiene to 2,6-dimethyl-p-benzoquinone and that of the corresponding intramolecular [2+2] photocyclization product were also obtained by single crystal X-ray structural analysis. As the second part of the study, a new polycyclic "cage" molecule, a substituted trishomocubane isomer, was synthesized. In this synthesis, reductive bond cleavage followed by Dieckmann condensation was employed. Wolff-Kishner reduction then was used to convert a β-keto ester "cage" molecule to the corresponding carboxylic acid. A compound that possesses twofold symmetry was isolated from reaction product mixture. The structure of this compound has been established by single crystal X-ray crystallography.

Thermal and flash photolysis studies of ligand-substitution reactions of cis-(pip)(L)M(CO)_4 by L' (pip = piperidine; L, L' = CO, phosphines, phosphites; M = Cr, Mo) implicate square-pyramidal [(L)M(CO)_4], in which L occupies a coordination site in the equatorial plane, as the reactive species. In chlorobenzene (= CB) solvent, the predominant species formed after flash photolysis and a steady-state intermediate for the thermal reaction is cis—[(CB)(L)M(CO)_4], for which rates of CB-dissociation increase with increasing steric demands of coordinated L. Rates of CB-dissociation from trans-[(CB)(L)M(CO)_4] intermediates, formed after photolysis but not thermally, exhibit no observable dependence on the steric properties of the coordinated L.

A brainstem-related abnormality in respiratory control appears to be one of the most compelling mechanisms for sudden infant death syndrome (SIDS). The elements calcium, copper, iron, potassium, magnesium, sodium, phosphorus, sulfur, and zinc were analyzed by inductively coupled plasma atomic emission spectroscopy in the brainstem of 30 infants who died from SIDS and 10 infants who died from other causes (control). No differences were found between SIDS and control for any element except for more calcium in the SIDS group. A multivariate analysis of the data failed to group the majority of SIDS and control subjects in different clusters. Further research is required to determine the biological significance of the higher calcium found in the SIDS group.,

The synthesis of E- and Z-1,1,2,3-tetramethylsilacyclobutanes is described. Pyrolysis of either isomer at 398.2 °C provides the same products but in different amounts: propene, E- and Z-2-butene, allylethyldimethylsilane, dimethylpropylsilane, the respective geometric isomers, 1,1,2,3,3-pentamethyl-1,3-disilacyclobutane, 1,1, l-ethyldimethyl-2,2,2-vinyldimethyl-disilane and E- and Z-1,1,2,3,3,4-hexamethyl-1,3-disilacyclobutane. Mechanisms involving di- and trimethylsilenes are described for disilane formation and rate constants of the elementary steps for the fragmentation reactions are reported. Photochemically generated dimethylsilylene in the hydrocarbon solution inserts into the cyclic Ge-C or Si-C bonds of 1,1-dimethylgerma- or silacyclobutane to produce 1-germa-2-sila- or 1,2-disilacyclopentane. The relative reactivities of 1,1-dimethylgerma- and silacyclobutanes toward the dimethylsilylene have been determined. The carbenoid resulting from the cuprous chloride catalyzed decomposition of diazomethane at 25 °C in cyclohexane reacts with 1,1-dimethylgermacyclobutane to give, surprisingly 1,1,5,5-tetramethyl-1,5-digermacyclooctane as the major product. The reactions of the carbenoid with 1,1-dimethylsilacyclobutane are described. The kinetics of gas phase thermal decomposition of 1,1-dimethylgermacyclobutane has been studied over the temperature range, 684 - 751 K at pressures near 14 Torr. The Arrhenius parameters for the formation of ethylene are k_1 (s^-1) = 10^(14.6 ± 0.3) exp (62.7 ± 2.9 kcal mol^-1/RT) and those for the formation of propene and cyclopropane are k_2 (s^-1) = 10^(14.0 ± 0.1 ) exp …

Incineration is an attractive solution to the problems of disposing of municipal solid wastes and supplying energy. Because up to 25 percent of the waste in refuse-derived-fuel systems is ash, the physical and chemical characteristics of ash become more and more important for its potential impacts and methods suitable for their disposal. Trace elements concentration in ash is of great interest because of its relationship to regulatory criteria under the Resource Conservation and Recovery Act (RCRA) regarding toxicity and hazards. The applications of a microwave oven sample dissolution method has been tested on a variety of standard reference materials, with reproducible and accurate results. Fourteen trace elements, As, Ba, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Se, Tl, V, and Zn, from the dissolved ash samples were determined by inductively coupled plasma atomic emission spectrometry.

Waste-to-energy has become an attractive alternative to landfills. One concern in this development is the release of pollutants in the combustion process. The binder enhanced d-RDF pellets satisfy the requirements of environmental acceptance, chemical/biological stability, and being storeable. The acid gas emissions of combusting d-RDF pellets with sulfur-rich coal were analyzed by ion chromatography and decreased when d-RDF pellets were utilized. The results imply the possibility of using d-RDF pellets to substitute for sulfur-rich coal as fuel, and also substantiate the effectiveness of a binder, calcium hydroxide, in decreasing emissions of SOx. In order to perform the analysis of the combustion sample, sampling and sample pretreatment methods prior to the IC analysis and the first derivative detection mode in IC are investigated as well. At least two trapping reagents are necessary for collecting acid gases: one for hydrogen halides, and the other for NOx and SOx. Factors affecting the absorption of acid gases are studied, and the strength of an oxidizing agent is the main factor affecting the collection of NOx and SOx. The absorption preference series of acid gases are determined and the absorption models of acid gases in trapping reagents are derived from the analytical results. To prevent …

The research reported here is a study of detector systems to determine those most suited for simultaneous organic acid, inorganic anion determination. Comparisons are made on the basis of detection limits and sensitivities for conductivity, UV/Vis, photoconductivity, and derivative conductivity detection systems. The investigation was made using a constant chromatographic system with the only variable component being the detector system. Eluant optimization conditions for each detector are reported along with tables reporting detection limits and sensitivities for each detector system. Various chromatograms are also shown to provide a visual comparison between detector results.

Ion chromatography coupled with a conductivity detector was used to investigate the analysis of Cr(III) and Cr(VI) in aqueous samples. An IC methodology for Cr(III) was developed using a cation column and an eluent containing tartaric acid, ethylenediamine, and acetonitrile at pH 2.9. The detection limit of this method can reach 0.1 ppm level with good precision. Several operational parameters were evaluated during the regular use of the method. Comparison of the IC method with AA method showed good agreement between the two methods. The anion exchange column was used for Cr(VI) determination. The best results were obtained with an eluent containing sodium gluconate, borate buffer, glycerin, and acetonitrile. The retention time for the Cr207 2 - sample was 11 min. and the calibration curve was linear between 1.0 and 100 ppm.

Nuclear magnetic resonance (NMR) provides a convenient probe for the study of molecular reorientation in liquids because nuclear spin-lattice relaxation times are dependent upon the details of molecular motion. The combined application of Raman and Infrared (IR) lineshape analysis can furnish more complete information to characterize the anisotropic rotation of molecules. Presented here are the studies of NMR relaxation times, together with Raman/IR Mneshape analysis of the solvent and temperature dependence of rotational diffusion in 1,3,5-tribromobenzene and 1,3,5-trifluorobenzene. In these experiments, it was found that the rotational diffusion constants calculated from Perrin's stick model were two to three times smaller than the measured values of D, and D,,. Similarly, rotational diffusion constants predicted by the Hu-Zwanzig slip model were too large by a factor of 2. Application of the newer Hynes-Kapral-Weinberg model furnished rotational diffusion constants that were in reasonable agreement with the experimental results. The vibrational peak frequencies and relaxation times of the isotropic Raman spectra of the υ1 modes of CD2Br2 and CHBr3 were studied in solution. The frequency shifts in non-interactive solvents were explained well on the basis of solution variations in the dispersion energy. In Lewis bases, the displacements were in some, but not all, cases …

This student is interested in reinvestigating the kinetics and mechanism of the bridged compound in l,2-dichloroethane with triisopropyl phosphite and in finding the reasons why the values of competition ratio k₋₂ /k₃ in this reaction are so large.

Four mechanisms were considered as possible causes of the loss in resolution for a Dionex CG2 ion chromatography resin: 1) presence of inorganic ions strongly bound to the active sites; 2) adsorption of organic species; 3) physical alterations; and 4) chemical alterations. The instrumental analyses used to gather data were ICP, FT-IR, SEM, solid C-13 NMR and IC. Based on the results, no metal ions are bound to the resin, no organic species are held onto the resin, and no physical change was observable. The cause for the loss of resolution is a strong reduction in the number of active sites in the resin as confirmed by elemental analysis for the sulfur in the sulfonic acid present in the active sites.

We report the attempted syntheses of two photochemical dimethylsilene precursors, both of which are derived from polyphenyl silanorbornadiene skeletons. Possible synthetic schemes and our results are reported herein. Photolysis of 1,2-divinyl-1,1,2,2-tetramethyl-1,2-disilane at room temperature in a cyclohexane solution of 1,3-butadiene produces 1,1-dimethyl-2-(vinyldimethylsilylmethyl) silene which is trapped in high yields to afford the E- and Z-1,1-dimethyl-2-(vinyldimethylsilylmethyl)-3-vinyl-1-silacyclobutanes in 42 and 29% yields, respectively, along with minor amounts of 1,1-dimethyl-2-(vinyldimethylsilylmethyl)-1-silacyclohex-3-ene, 9%. Low Pressure Flow Pyrolysis at 450º C of either the E- or Z-isomer provides a relatively mild thermal source of the silene in the gas phase. Two products, 1,1,3,3-tetramethyldisilacyclohex-3-ene and 2,2,5,5-tetramethyl-2,5-disilabicyclo[2.2.1]hexane, are formed from an intramolecular rearrangement of the silene. Other reactions of the 3-vinylsilacyclobutanes include geometric isomerization, ring expansion to the silacyclohex-3-ene, and a homodienyl-1,5-hydrogen shift to 3,3,6,6-tetramethyl-3,6-disiladeca-1,4,8-triene. Synthetic schemes, successful and unsuccessful, for hydrido silene, acylpolysilene, and fluorine substituted silene precursors are discussed in the final chapter.

Raman vibrational bands are sensitive to fluctuations in the molecular environment. Variations in the bandwidth and peak position can then be utilized to monitor molecular forces and interactions present in condense phases. Nuclear Magnetic Resonance (NMR) provides a convenient probe for the study of molecular reorientation in liquids since nuclear spin relaxation times are dependent on the details of molecular motion. Presented here is the solvent study of the Raman bandwidths and frequency displacements of the mode of the compounds CH3MCI3 (M = C, Si, Ge, Sn) in a number of solvents of widely varying molecular structure. Also, a detailed isotope dilution study of the modes in CH2CI2/CD2CI2 mixtures is presented. In this set of experiments, I observed broadening of the v1 mode of CH2C12 upon dilution,which is the first experimental observation of such behavior. The temperature-dependent carbon-13 relaxation times and nuclear Overhauser enhancements in neat dichloromethane were measured. In this study we found that the molecular reorientation of this molecule was highly anisotropic, but could be well characterized assuming quasi-symmetric top behavior. In addition, in order to gain a more complete understanding of the reorientational dynamics in dichloromethane, we analyzed the 13-C NMR relaxation of CH2CI2 both in "inert" …

HPLC has been used and can quickly determine several ions simultaneously. The method of determination described for transition metals [Cr(III), Fe(III), Ni(II), Co(II), Cu(II), Zn(II), Cd(II), Mn(II)] and [Ca(II), Pb(II)] using HPLC with UV-VIS detection is better than the PAR complexation method commonly used. The effects of both eluent pH and detector wavelength were investigated. Results from using different pHs and wavelengths, optional analytical conditions for the separation of [Ni(II), Co(II), Cu(II)], [Cr(III), Fe(III), Ca(II), Ni(II), Cu(II)], and [Ca(II), Zn(II), Pb(II)] in one injection, respectively, are described. The influence of adding different concentrations of Na_2EDTA solvent to the sample is shown. Detection limits, linear range, and the comparisons between this study and a post-column PAR method are given.

The method utilizes both cation and anion concentrator columns in parallel as a preconcentration system. The preconcentrator system is loaded using a reagent delivery module operated for a specific time at a preset flow rate. Total injection volumes of 2-5 ml are routinely used. Various chromatograms are discussed along with detailed information concerning detection limits for sodium and chloride, the system operating conditions, and the solutions to other pitfalls which have arisen during the course of this work.

A variable temperature ^13 C and ^199 Hg NMR study has been conducted for diphenyl-, bis(o-tolyl)-, bis(m-tolyl)-, and bis(2, 6-xylyl)mercury in dimethyl sulfoxide and 1,1,2,2 tetrachloroethane; ^13 C T1 relaxation times are reported as a function of temperature. Barriers to rotation of the aryl rings are obtained. Chemical shifts and couplings in CDCl_3 are given for bis(p-tolyl)-, bis(2, 5-xylyl)-, bis(mesityl)-,phenyl(o-tolyl)-, phenyl(m-tolyl)mercury, and the compounds listed above. The steric interactions of these aryl mercury compounds are discussed.