The reactions of diagonal and lateral Cp'Re(CO)2Br2 (where Cp' = n5-C5H5, n5-C5Me5) and (n5-CgH7)Re(CO)3 with reducing agents have been examined. Hydride reduction at -78 °C is observed to occur at the Cp ring in both CpRe(CO)2Br2 isomers, affording a thermally unstable [(n4 -C5Hg)Re(CO)2Br2]- complex. The product of hydride ring attack has been characterized by low-temperature IR and 1H NMR measurements in addition to 13C NOE and heteronuclear 2D NMR measurements. Reaction of lateral CpRe(CO)2Br2 with either MeLi or PhLi affords both Cp-ring attack and metalhalogen exchange, [CpRe(CO)2Br]- (1) while t-BuLi reacts exclusively via metal-halogen exchange. diag-CpRe(CO)2Br2 reacts with the above lithium reagents to yield the same metal-halogen exchange anion. Analogous reactions using diag- and lat-Cp*Re(CO)2Br2 (where Cp* = n5-CgMe5) afford only the corresponding rhenium metal-halogen exchange anion, [Cp*Re(CO)2Br] (2). The molecular structures of 1-[Li/15-Crown-5] and 2-PPP were established by X-ray crystallography. 1-[Li/15-Crown-5] crystallizes in the monoclinic space group P21 with a = 10.860(4) A, b = 13.116(5) A, c = 7.417(3) A, B = 105.26(3)0, V = 1018.7(3) A3 , and Z = 2. 2-PPP crystallizes in the orthorhombic space group Pbca with a = 20.646(5) A, b = 17.690(5) A, c = 17.553(3) A, and z = 8. Solution …

Waste-to-energy has become an attractive alternative to landfills. One concern in this development is the release of pollutants in the combustion process. The binder enhanced d-RDF pellets satisfy the requirements of environmental acceptance, chemical/biological stability, and being storeable. The acid gas emissions of combusting d-RDF pellets with sulfur-rich coal were analyzed by ion chromatography and decreased when d-RDF pellets were utilized. The results imply the possibility of using d-RDF pellets to substitute for sulfur-rich coal as fuel, and also substantiate the effectiveness of a binder, calcium hydroxide, in decreasing emissions of SOx. In order to perform the analysis of the combustion sample, sampling and sample pretreatment methods prior to the IC analysis and the first derivative detection mode in IC are investigated as well. At least two trapping reagents are necessary for collecting acid gases: one for hydrogen halides, and the other for NOx and SOx. Factors affecting the absorption of acid gases are studied, and the strength of an oxidizing agent is the main factor affecting the collection of NOx and SOx. The absorption preference series of acid gases are determined and the absorption models of acid gases in trapping reagents are derived from the analytical results. To prevent …

High Performance Liquid Chromatography (HPLC) was used to investigate the utility of this technique for the analytical and preparative separation of components of aquatic fulvic acids (FA). Three modes of HPLC namely adsorption, anion exchange and reversed phase were evaluated. Aquatic fulvic acids were either extracted from surface water and sediment samples collected from the Southwest of the U.S., or were provided in a high purity form from the USGS. On the adsorption mode, a major fraction of aquatic fulvic acid was isolated on a semipreparative scale and subjected to Carbon-13 NMR and FAB Mass Spectroscopy. Results indicated that (1) The analyzed fraction of fulvic acid contains more aliphatic than aromatic moieties; (2) Methoxy, carboxylic acids, and esters are well-defined moieties of the macromolecule; (3) Phenolic components of the macromolecules were not detected in the Carbon-13 NMR spectrum possibly because of the presence of stable free radicals. Results of the anion exchange mode have shown that at least three types of acidic functionalities in aquatic fulvic acid can be separated. Results also indicated that aquatic fulvic acid can be progressively fractionated by using subsequent modes of HPLC. Results of reversed phase mode have shown that (1) The fractionation of aquatic …

In order to explore the N-H stretching region of aliphatic amines, we performed a study of the Raman spectrum of n-propylamine at various concentrations in cyclohexane. Statistical analysis provided evidence of a second symmetric stretching vibration, which we were able to assign to nonhydrogen bonded NH2 groups. To obtain additional evidence on the existence of monomers in n-propylamine and to further study hydrogen bonding and Fermi resonance in aliphatic amines, we extended the investigation to the analysis of the Raman spectrum of this compound over an extended range of temperature in the neat liquid phase. This study corroborated our finding that the peak previously assigned to the symmetric stretching mode of hydrogen bonded amines is actually composed of two bands. Furthermore, trends in both the resolved band parameters and the Fermi resonance analysis were tabulated, allowing one to monitor the change in the N-H valence region with concentration and temperature.

Thermal and flash photolysis studies of ligand-substitution reactions of cis-(pip)(L)M(CO)_4 by L' (pip = piperidine; L, L' = CO, phosphines, phosphites; M = Cr, Mo) implicate square-pyramidal [(L)M(CO)_4], in which L occupies a coordination site in the equatorial plane, as the reactive species. In chlorobenzene (= CB) solvent, the predominant species formed after flash photolysis and a steady-state intermediate for the thermal reaction is cis—[(CB)(L)M(CO)_4], for which rates of CB-dissociation increase with increasing steric demands of coordinated L. Rates of CB-dissociation from trans-[(CB)(L)M(CO)_4] intermediates, formed after photolysis but not thermally, exhibit no observable dependence on the steric properties of the coordinated L.

The aim of the investigation described in this work is to gain a better understanding of the processes involved in the oxidation of organic compounds by photolytic ozonation in a laboratory scale reactor. The results and discussions are presented in Chapter III. This chapter contains four parts. In the first part, mass transfer efficiency and the calculation of the mass transfer coefficient, KLa, as well as the ozone decomposition rate constant, KD, are presented and compared with those obtained by other investigators. The second part deals with the kinetics of the photolysis of 2,2',4,4',6,6'-hexachlorobiphenyl both in purified and natural lake water. Mathematical expressions and a discussion of the possible reaction processes involved are given. Kinetic models of ozonation and photolytic ozonation in purified and natural lake water are developed and discussed in part three. Rate constants are calculated from experimental data and used to predict values of substrate destruction with a mathematical model. The fourth part of this chapter deals with the identification of products from the photolysis, ozonation and photolytic ozonation of 2,2'4,4',6,6'-hexachlorobiphenyl. The products are isolated and identified using combined gas chromatography and mass spectroscopy, and reaction mechanisms are suggested.

The objective of this study was to synthesize and characterize new energetic polycyclic "cage" compounds. As part of a program involved in the synthesis of new polynitropolycyclic compounds, 2,6-dinitro-5-methoxy- 7-carbomethoxypentacyclo[5. 3 .0 . 0* • * . CP • i ° . 0* •8]decane has been synthesized. This is a model system which can be used to study (1) the effect of nitro substitution on the photolability of carbon-carbon double bonds and (2) to develop methods for avoiding Haller-Bauer cleavage in cage /3-keto esters when synthesizing polynitro-substituted cage compounds.

The reaction of chlorodimethylvinylsilane with tertbutyllithium was investigated in the presence of several conjugated dienes. In all cases except with 2,5-dimethylfuran, [2+4] cycloadducts of a silene intermediate are obtained in hydrocarbon solvents. The presence of THF in the reaction mixture suppresses the formation of cycloadducts in favor of 1,3-disilacyclobutanes. In the reaction of dimethylethoxyvinylsilane or dimethylmethoxyvinylsilane with tert-butyllithium the main product is the 1,1-dimethyl2-neopentyl-4-(dimethylalkoxysilyl)silacyclobutane. It is concluded that lithium chloride elimination to give silene intermediates occurs in hydrocarbon solvents. In the presence of strong Lewis bases or when the leaving group on silicon is an alkoxy group, the addition reaction giving a-lithiosilanes occurs and products arising from their coupling reactions are obtained.

This study deals with the (4+2)-cycloaddition reactions of 4-π electron compounds with ketenes. Chloroketenes were generated in situ from the corresponding chlorinated acid chlorides in the presence of the ketenophiles. Chloro-, dichloro- and diphenylketenes reacted with 1-methoxy-3-trimethylsiloxy-l,3-butadiene, and 2,4-bis(trimethylsiloxy)-1,3-pentadiene to yield the corresponding dihydropyrans. The dihydropyrans yielded substituted 4-pyranones on hydrolysis.

Various modern spectroscopies have been utilized with considerable success in recent years to probe the dynamics of vibrational and reorientational relaxation of molecules in condensed phases. We have studied the temperature dependence of the polarized and depolarized Raman spectra of various modes in the following dihalomethanes: dibromomethane, dichloromethane, dichloromethane-d2, and bromochloromethane. Among other observed trends, we have found the following: Vibrational dephasing times calculated from the bend) and (C-Br stretch) lineshapes are of the same magnitude in CI^B^. The vibrational dephasing time of [C-D(H) stretch] is twice as long in CD2Cl2 as in CH-^C^, and the relaxation time of (C-Cl stretch) is greater in CI^C^ than in CD2CI2. Isotropic relaxation times for all three stretching vibrations are significantly shorter in C^BrCl than in CI^C^ or CI^B^. Application of the Kubo model revealed that derived modulation times are close to equal for equivalent vibrations in the various dihalomethanes. Thus, the more efficient relaxation of the A^ modes in CE^BrCl can be attributed almost entirely to the broader mean squared frequency perturbation of the vibrations in this molecule.

Cyclopropanation of the unsaturated fatty acid moieties of membrane phospholipids is a commonly observed phenomenon in a number of bacterial systems. The cyclopropane fatty acids are usually synthesized during and after the transition from exponential growth to stationary phase, or under such environmental conditions as acidic culture pH, low oxygen tension or high salt concentrations. S-Adenosylmethionine, the ubiquitous methyl group donor, provides the methylene bridge carbon in the reaction catalyzed by cyclopropane fatty acid synthase. Also formed in the reaction is S-adenosylhomocysteine, a potent inhibitor of cyclopropane fatty acid synthase, which is degraded by S-adenosylhomocysteine nucleosidase. This work provides evidence for at least two modes of regulation of lactobacillic acid synthesis, the cyclopropane fatty acid formed from cis-vaccenic acid (cis-11,12-octadecenoic acid), in Lactobacillus piantarum.

Pulsed laser time-resolved ligand-substitution photochemistry for (DTO)W(CO)4, (DTN)W(CO)4, and (NP)Mo(CO)4 (DTO = 2,2,7,7-tetramethyl-3,6-diathiaoctane; DTN = 2,2,8,8- tetramethyl-3,7-diathianonane; NP = l-diethylamino-2- diphenylphosphinoethane) proceeds via initial fission of the W-S and Mo-P bonds, affording Cs and C4v five-coordinate intermediates for DTN and NP but largely Cs for DTO. The rates of reaction of these intermediates, via chelate ring closure and competitive bimolecular interaction with Lewis bases (= L, alkylphosphines and alkyl phosphites) for the Cs intermediates and via bimolecular interaction of L with the C4v intermediates, together with activation parameters for these processes have been determined. The rates of interactions at the Cs intermediates are significantly faster than at the C4v intermediates.

The first objective of this investigation was to conduct a systematic study into the reactions of chloroketenes with ketene acetals. The second objective was to explore the synthetic utility of these reaction products and offer a rational explanation for these reaction products.

The reactions of tert-butyl-, sec-butyl-, and n-butyllithium with dimethylfluorovinylsilane include addition to the double bond to give both silene and silenoid intermediates, fluorine substitution, and a novel vinyl substitution. For the tert-butyllithium reaction, product stereochemistry and trapping experiments using both cyclopentadiene and methoxytrimethylsilane show that silenes are not formed in THF. In hexane about 67% of the 1,3-disilacyclobutanes obtained arise from silene dimerization while 33% are formed by silenoid coupling. In hexane the order of reactivity for addition, t-Bu > sec-Bu > n-Bu, is opposite that for fluorine substitution. The vinyl substitution is most significant with secondary alkyllithium reagents including the tert-butyllithium adduct to dimethylfluorovinylsilane and with sec-butyllithium itself. Evidence for the formation of vinyllithium or ethylene in the process could not be obtained.

Electric field studies, electrochromism, were used to obtain excited-state data for analogous divalent sulfur compounds. The sulfides investigated were dimethyl sulfide and small cyclic sulfides including the three to six member ring compounds. The excited-state dipole moments and polarizabilities are reported for the first s, p, and d Rydberg absorption bands which occur in the near vacuum ultraviolet region from 230 to 170 nm. The excited-state data are interpreted in terms of the particular excited-state (s, p, or d) for the molecules and the bending differences due to the presence of the ring and the number of atoms in the ring. The next section describes the use of electrochromism to investigate the pressure effect of argon, carbon tetrafluoride and sulfur hexafluoride on the spectra for molecular Rydberg states.

Nucleophiles react with the α-acetoxy derivative of α-hydroxybenzylbenzylnitrosamine at the carbonyl carbon of the acetoxy moiety followed by fragmentation to the very same intermediates formed by oxidative metabolism. Since α-acetoxybenzylbenzylnitrosamine has been shown to be able to acylate nucleophiles and since the nucleic acids are nucleophiles, then it is possible that this compound may cause mutations by an acylation pathway instead of or in addition to the more common alkylation pathway. The data in Part I of this dissertation should be considered in any further biological investigations of N,N-dialkylnitrosamine induced mutagenesis or carcinogenesis. The study of the synthesis, reactions, mutagenicity, and the possible correlation to compound liposolubility of cyclic N-nitrosamines was also investigated.

The physico-chemical properties of lecithin:cholesterol acyltransferase were investigated. The amino acid composition analysis showed a relatively high content of glutamic acid, aspartic acid, glycine and leucine. The spectrophotometric titration of phenolic groups in the enzyme showed a large increase in absorbance at 295 nm with an apparent pK of about 12.0. The largest change in molar ellipticity at 222 nm was also observed above pH 11. Circular dichroism studies revealed that human lecithin:cholesterol acyltransferase has a relatively high content of β-pleated sheet structure (48%) with 20% α-helix, and 32% remaining structure. Human lecithin:cholesterol acyltransferase has a high extinction coefficient at neutral pH. Microsequencing of the amino terminal residues of the enzyme revealed a hydrophobic character. Inactivation of lecithin:cholesterol acyltransferase activity was observed using diisopropylfluorophosphate with a stoichiometry of 1 mole of diisopropylphosphate incorporated per mole of enzyme. This suggests the involvement of a serine residue in the active site of the enzyme, possibly for the formation of an acyl-intermediate. A new quicker assay method for lecithin:cholesterol acyltransferase was developed. This assay involved coupling reaction with acyl CoA synthetase, ΡΡᵢ-dependent phosphofructokinase, aldolase, triosephosphate isomerase and α-glycerol-3-phosphate dehydrogenase monitoring a change in the absorbance or fluorescence intensity due to the oxidation of …

A study has been conducted for the qualitative and Quantitative analysis of chlorinated organic compounds in water. The study included the adaptation of Amberlite XAD macroreticular resin techniques for the concentration of municipal wastewater samples, followed by GC/MS analysis. A new analytical method was developed for the determination of volatile halogenated organics using liquid-liquid extraction and electron capture gas chromatography. And, a computer program was written which searches raw GC/MS computer files for halogen-containing organic compounds.

This dissertation reports the preparation of several types of anthraquinones structurally related to adriamycin. It describes the synthesis of two types of 2-aminoquinizarin compounds. It also presents two new syntheses of a heterocyclic tetracyclic ring system, similar to the aglicone ring system of adriamycin. A series of 2-aminoquinizarins was prepared by adding several primary amines to quinizarin. Quinizarin was shown to be essentially inert toward secondary amines. Several secondary amine adducts with quinizarin have been prepared, however, by treating the bis-boroacetate ester of quinizarin with the amines. Both types of 2-aminoquinizarin compounds exhibit outstanding potential for possessing antineoplastic activity, and several have been submitted to the National Cancer Institute for testing in their screening program for antineoplastic agents.

Evidence is presented that apparent silene products obtained from the metalation of cyclopentadienyldimethyl - chlorosilane either with tert-butyl1ithium or with methylenetriphenylphosphorane actually arise from the metalated starting material, a silenoid, rather than from a silafulvene intermediate. Trimethylmethoxysi1ane is shown to be an effective trap for dimethylsilafulvene. A new dimethylsilafulvene precursor, bis(dimethylmethoxysi1yl) cyclopentadiene, which gives high yields of dimethyldimethoxysi1ane and the silafulvene at temperatures as low as 240°C is reported.

Since the development of the understanding that the electron distribution within a molecule is chiefly responsible for its properties and behavior, factors influencing this charge distribution have been of interest to scientists. The chemical reactivity of a molecule, the physical properties, and to a large extent, structure and geometry, are all functions of the electron distribution. This study examines the issue of electronic structure from two points of view, each of them focussing on a specific component within the molecules studied. In the present work, the effects of the highly polar carbonyl group on spectroscopic parameters and physical behavior are investigated. An additional area of study is the effect of fluorine substitution on the energy levels of some halogenated ethylenes. The specific parameters examined are the ionization potentials, the absorption frequencies, and the energies of a class of excited states known as molecular Rydberg states. It was during the study of these halogenated ethylenes that the observations leading to the carbonyl compound investigations were made, so that the two areas examined are connected both experimentally and chemically.

Ketene dimethyl thioacetal monosulfoxide was prepared in 68% overall yield in two steps starting from methylmagnesium chloride. The yield of dithioacetic acid was improved significantly by employing tetrahydrofuran as solvent and using elevated temperatures. A one-pot synthesis of ketene thioacetals from alkyl halides was developed and several ketene thioacetals were prepared by this method. Direct oxidation of ketene thioacetals using m-chloroperoxybenzoic acid provided a general route to ketene thioacetal monosulfoxides. In cases where E and Z isomeric ketene thioacetal monosulfoxides were possible, the E/Z isomeric ratio increased as the substituents on the ketene double bond was increased in size.

The objective of this study was to explore intramolecular ketene cycloadditions with the anticipated results of developing new synthetic methodology for the synthesis of polycyclic compounds difficult to obtain by other procedures. (o-Alkenylphenoxy)ketenes were initially selected for this study because these ketenes provided a favorable proximity for the intramolecular [2+2] cycloaddition reactions. The difunctional precursors, (o-alkenylphenoxy)- acetic acids, were readily prepared from o-alkenylphenols and ∝-halocarboxylic acids and were converted to the corresponding acid chlorides by reaction with oxalyl chloride. The acid chlorides were dehydrochlorinated to the corresponding (o-alkenylphenoxy)ketenes by treatment with triethylamine. The ketenes undergo a facile intramolecular [2+2] cycloaddition to give polycyclic eye 1obutanones. The (o-vinylphenoxy)ketenes are clearly more reactive than the (o-allylphenoxy)ketenes and provide much better yields of the cycloaddition products because of electronic effects in the transition state in the cycloaddition process. The intramolecular [2+2] cycloadditions of keteniminium salts were included in this study as a more electrophilic alternative to ketenes that will react with less nucleophilic carbon-carbon double bonds. However, the use of keteniminium salts instead of ketenes in Intramolecular cycloadditions does have some limitations. The synthesis of benzofurans via the intramolecular [2+2] cycloadditions of (o-acylphenoxy)ketenes was accomplished. The initially formed ß-lactone cycloaddition products spontaneously underwent …

Pyrolysis-capillary gas chromatography combined with FID, ECD and MS detection were used to characterize refuse-derived fuel and aquatic fulvic acids. Different pyrolysis methods and programs were evaluated. Pyrolysis temperatures of 700-800°C produced the strongest signal for organics present in RDF and fulvic acid. Cellulose and fatty acids pyrolyzates were identifiable by GC-MS following preparative pyrolysis fractionation. At organic chloride content of 0.023%, only three halogenated compounds were detected in the GC-MS of the fractions. None of the priority pollutants were detected at lower detection limit of 0.72 to 24 mg/ kg RDF. Selective solvent extraction improves the reproduciblities of the technique and allows the detection of polymeric structures. Pyrograms of polyvinyl chloride and regular typing paper showed some common peaks that are present in the RDF pyrogram. About 65% of the peaks in the RDF pyrogram might be of paper origin. The organic chloride content of the RDF was evaluated by ion chromatography of the trapped pyrolyzates in 2% NaOH trap and it was found to be 221 mg Cl/ kg dry RDF. Pyrolysis conditions and temperature programs for FA were systematically evaluated. Samples included purified FA, methylated FA and HPLC separated fractions. Characteristic pyrograms were developed. Profiles of benzene, …