This study was intended to provide a fuller understanding of the surface chemical processes which result in the corrosion of ferrous materials.

New one- and two-dimensional NMR techniques were used to elucidate the solution structures of these complex mixtures. The system, lithium tert-butoxide/tert-butyllithium, was studied as a model system with O/Li ratios varying from 0/1 to 1/1. It was found that at low O/Li ratios, a single mixed tetrameric aggregate was formed. At higher O/Li ratios, mixed hexameric species were formed. Two other systems, lithium isopropoxide/iso-propyllithium and lithium n-propoxide/n-propyllithium were also studied at low O/Li ratios.

Dimethoxynaphthalene (donor) and quinone (acceptor) have been chosen as a suitable redox pair and are bonded to either permethylated silane chains or corresponding permethylated alkyl chains to form Acceptor-(Bridge)-Donor molecules. The idea that the s-delocalization phenomenon of silane chains may greatly facilitate ET reactions will be tested. The starting material for the donor precursor, 4-(1,4-dimethoxynaphthyl)bromocyclohexane, was 1,4-naphthoquinone. After methylation and bromination, the Grignard reagent of the resulting bromide was reacted with cyclohexanedione, mono ethylene ketal. The resulting alcohol was changed to the donor precursor through the following functional group transformation steps: dehydration, hydrogenation, deketalization and bromination. 1,4-Dibenzyloxybromobenzene, the precursor for the acceptor, was synthesized from 1,4-hydroquinone through bromination and benzylation. The connection of the two precursors and either permethylated silane chains or permethylated alkyl chains will give the final target molecules for ET research. Progress on this is included.

The tricobalt cluster PhCCo3(CO)9 (1) reacts with the bidentate phosphine ligand 2,3-bis(diphenylphosphino)maleic anhydride (bma) in the presence of added Me3NO to give the diphosphine-substituted cluster PhCCo3(CO)7(bma) (2). Cluster 2 is unstable in solution, readily losing CO to afford Co3(CO)6[(μ2-η2/η1-C(Ph)C=C(PPh2)C(O)OC(O)](μ2-PPh2) (3) as the sole observed product. VT-31P NMR measurements on cluster 2 indicate that the bma ligand functions as both a chelating and a bridging ligand. At -97 °C, 31P NMR analysis of 2 reveals a Keq of 5.7 in favor of the bridging isomer. The bridged bma cluster 2 is the only observed species above -50°C. The solid-state structure of 2 does not correspond to the major bridging isomer observed in solution but rather the minor chelating isomer. The conversion of 2 to 3 followed first-order kinetics, with the reaction rates being independent of the nature of the reaction solvent and strongly suppressed by added CO, supporting a dissociative loss of CO as the rate-determining step. The activation parameters for CO loss were determined to be ΔH≠ = 29.9 ± 2.2 kcal/mol and ΔS≠ = 21.6 ± 6 eu.

Polymer hydrogel films change their properties in response to environmental change. This remarkable phenomenon results in many potential applications of polymer hydrogel films. In this thesis colored thermo-sensitive poly(N-isopropylacrylamide) (PNIPAAm) hydrogel film was prepared by firstly synthesizing polymer latex and secondarily crosslinking the nanoparticles and casting the polymers onto glass. The shape-memory effect has been observed when changing the environmental temperature. The temperature-dependent of turbidity of polymer hydrogel film was measured by HP UVVisible spectrophotometer. This intelligent hydrogel might be used in chemomechanical systems and separation devices as well as sensors. Polymer adsorption plays an important role in many products and processes. In this thesis, surfactant-free three-dimensional polystyrene (PS) nanoparticle network has been prepared. The infrared spectroscopy and solubility experiment are performed to prove the crosslinking mechanism, also the BET method was used to measure the adsorption and desorption of polystyrene network. The BET constant (C) is calculated (C=6.32). The chemically bonded polymer nanoparticle network might have potential applications as catalyst or used for chromatographic columns.

Metal and oxide interactions are of broad scientific and technological interest in areas such as heterogeneous catalysis, microelectronics, composite materials, and corrosion. In the real world, such interactions are often complicated by the presence of interfacial impurities and/or high electric fields that may change the thermodynamic and kinetic behaviors of the metal/oxide interfaces. This research includes: (1) the surface hydroxylation effects on the aluminum oxide interactions with copper adlayers, and (2) effects of high electric fields on the interface of thin aluminum oxide films and Ni3Al substrate. X-ray photoelectron spectroscopy (XPS) studies and first principles calculations have been carried out to compare copper adsorption on heavily hydroxylated a- Al2O3(0001) with dehydroxylated surfaces produced by Argon ion sputtering followed by annealing in oxygen. For a heavily hydroxylated surface with OH coverage of 0.47 monolayer (ML), sputter deposition of copper at 300 K results in a maximum Cu(I) coverage of ~0.35 ML, in agreement with theoretical predictions. Maximum Cu(I) coverage at 300 K decreases with decreasing surface hydroxylation. Exposure of a partially dehydroxylated a-Al2O3(0001) surface to either air or 2 Torr water vapor results in recovery of surface hydroxylation, which in turn increases the maximum Cu(I) coverage. The ability of surface hydroxyl …

The reaction between the tetrahedrane cluster RCCo3(CO)9{R = CHO (1), H (3)} and the redox-active diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3- dione (bpcd) leads to the replacement of two CO groups and formation of RCCo3(CO)7(bpcd) {R = CHO (2), H (4)}. Clusters 2 and 4 are thermally unstable and readily transform into the new P-C bond cleavage cluster 5. All three clusters 2, 4, and 5 have been isolated and fully characterized in solution by IR and 31P NMR spectroscopy. VT 31P NMR data indicate that the bpcd ligand in RCCo3(CO)7(bpcd) is fluxional at 187 K in THF. Clusters 2, 4, and 5 have been structurally characterized by X-ray diffraction analyses.

The reactions of diagonal and lateral Cp'Re(CO)2Br2 (where Cp' = n5-C5H5, n5-C5Me5) and (n5-CgH7)Re(CO)3 with reducing agents have been examined. Hydride reduction at -78 °C is observed to occur at the Cp ring in both CpRe(CO)2Br2 isomers, affording a thermally unstable [(n4 -C5Hg)Re(CO)2Br2]- complex. The product of hydride ring attack has been characterized by low-temperature IR and 1H NMR measurements in addition to 13C NOE and heteronuclear 2D NMR measurements. Reaction of lateral CpRe(CO)2Br2 with either MeLi or PhLi affords both Cp-ring attack and metalhalogen exchange, [CpRe(CO)2Br]- (1) while t-BuLi reacts exclusively via metal-halogen exchange. diag-CpRe(CO)2Br2 reacts with the above lithium reagents to yield the same metal-halogen exchange anion. Analogous reactions using diag- and lat-Cp*Re(CO)2Br2 (where Cp* = n5-CgMe5) afford only the corresponding rhenium metal-halogen exchange anion, [Cp*Re(CO)2Br] (2). The molecular structures of 1-[Li/15-Crown-5] and 2-PPP were established by X-ray crystallography. 1-[Li/15-Crown-5] crystallizes in the monoclinic space group P21 with a = 10.860(4) A, b = 13.116(5) A, c = 7.417(3) A, B = 105.26(3)0, V = 1018.7(3) A3 , and Z = 2. 2-PPP crystallizes in the orthorhombic space group Pbca with a = 20.646(5) A, b = 17.690(5) A, c = 17.553(3) A, and z = 8. Solution …

The reaction of chlorodimethylvinylsilane with tertbutyllithium was investigated in the presence of several conjugated dienes. In all cases except with 2,5-dimethylfuran, [2+4] cycloadducts of a silene intermediate are obtained in hydrocarbon solvents. The presence of THF in the reaction mixture suppresses the formation of cycloadducts in favor of 1,3-disilacyclobutanes. In the reaction of dimethylethoxyvinylsilane or dimethylmethoxyvinylsilane with tert-butyllithium the main product is the 1,1-dimethyl2-neopentyl-4-(dimethylalkoxysilyl)silacyclobutane. It is concluded that lithium chloride elimination to give silene intermediates occurs in hydrocarbon solvents. In the presence of strong Lewis bases or when the leaving group on silicon is an alkoxy group, the addition reaction giving a-lithiosilanes occurs and products arising from their coupling reactions are obtained.

Cyclopropanation of the unsaturated fatty acid moieties of membrane phospholipids is a commonly observed phenomenon in a number of bacterial systems. The cyclopropane fatty acids are usually synthesized during and after the transition from exponential growth to stationary phase, or under such environmental conditions as acidic culture pH, low oxygen tension or high salt concentrations. S-Adenosylmethionine, the ubiquitous methyl group donor, provides the methylene bridge carbon in the reaction catalyzed by cyclopropane fatty acid synthase. Also formed in the reaction is S-adenosylhomocysteine, a potent inhibitor of cyclopropane fatty acid synthase, which is degraded by S-adenosylhomocysteine nucleosidase. This work provides evidence for at least two modes of regulation of lactobacillic acid synthesis, the cyclopropane fatty acid formed from cis-vaccenic acid (cis-11,12-octadecenoic acid), in Lactobacillus piantarum.

Electric field studies, electrochromism, were used to obtain excited-state data for analogous divalent sulfur compounds. The sulfides investigated were dimethyl sulfide and small cyclic sulfides including the three to six member ring compounds. The excited-state dipole moments and polarizabilities are reported for the first s, p, and d Rydberg absorption bands which occur in the near vacuum ultraviolet region from 230 to 170 nm. The excited-state data are interpreted in terms of the particular excited-state (s, p, or d) for the molecules and the bending differences due to the presence of the ring and the number of atoms in the ring. The next section describes the use of electrochromism to investigate the pressure effect of argon, carbon tetrafluoride and sulfur hexafluoride on the spectra for molecular Rydberg states.

Nucleophiles react with the α-acetoxy derivative of α-hydroxybenzylbenzylnitrosamine at the carbonyl carbon of the acetoxy moiety followed by fragmentation to the very same intermediates formed by oxidative metabolism. Since α-acetoxybenzylbenzylnitrosamine has been shown to be able to acylate nucleophiles and since the nucleic acids are nucleophiles, then it is possible that this compound may cause mutations by an acylation pathway instead of or in addition to the more common alkylation pathway. The data in Part I of this dissertation should be considered in any further biological investigations of N,N-dialkylnitrosamine induced mutagenesis or carcinogenesis. The study of the synthesis, reactions, mutagenicity, and the possible correlation to compound liposolubility of cyclic N-nitrosamines was also investigated.

The physico-chemical properties of lecithin:cholesterol acyltransferase were investigated. The amino acid composition analysis showed a relatively high content of glutamic acid, aspartic acid, glycine and leucine. The spectrophotometric titration of phenolic groups in the enzyme showed a large increase in absorbance at 295 nm with an apparent pK of about 12.0. The largest change in molar ellipticity at 222 nm was also observed above pH 11. Circular dichroism studies revealed that human lecithin:cholesterol acyltransferase has a relatively high content of β-pleated sheet structure (48%) with 20% α-helix, and 32% remaining structure. Human lecithin:cholesterol acyltransferase has a high extinction coefficient at neutral pH. Microsequencing of the amino terminal residues of the enzyme revealed a hydrophobic character. Inactivation of lecithin:cholesterol acyltransferase activity was observed using diisopropylfluorophosphate with a stoichiometry of 1 mole of diisopropylphosphate incorporated per mole of enzyme. This suggests the involvement of a serine residue in the active site of the enzyme, possibly for the formation of an acyl-intermediate. A new quicker assay method for lecithin:cholesterol acyltransferase was developed. This assay involved coupling reaction with acyl CoA synthetase, ΡΡᵢ-dependent phosphofructokinase, aldolase, triosephosphate isomerase and α-glycerol-3-phosphate dehydrogenase monitoring a change in the absorbance or fluorescence intensity due to the oxidation of …

Since the development of the understanding that the electron distribution within a molecule is chiefly responsible for its properties and behavior, factors influencing this charge distribution have been of interest to scientists. The chemical reactivity of a molecule, the physical properties, and to a large extent, structure and geometry, are all functions of the electron distribution. This study examines the issue of electronic structure from two points of view, each of them focussing on a specific component within the molecules studied. In the present work, the effects of the highly polar carbonyl group on spectroscopic parameters and physical behavior are investigated. An additional area of study is the effect of fluorine substitution on the energy levels of some halogenated ethylenes. The specific parameters examined are the ionization potentials, the absorption frequencies, and the energies of a class of excited states known as molecular Rydberg states. It was during the study of these halogenated ethylenes that the observations leading to the carbonyl compound investigations were made, so that the two areas examined are connected both experimentally and chemically.

The objective of this study was to explore intramolecular ketene cycloadditions with the anticipated results of developing new synthetic methodology for the synthesis of polycyclic compounds difficult to obtain by other procedures. (o-Alkenylphenoxy)ketenes were initially selected for this study because these ketenes provided a favorable proximity for the intramolecular [2+2] cycloaddition reactions. The difunctional precursors, (o-alkenylphenoxy)- acetic acids, were readily prepared from o-alkenylphenols and ∝-halocarboxylic acids and were converted to the corresponding acid chlorides by reaction with oxalyl chloride. The acid chlorides were dehydrochlorinated to the corresponding (o-alkenylphenoxy)ketenes by treatment with triethylamine. The ketenes undergo a facile intramolecular [2+2] cycloaddition to give polycyclic eye 1obutanones. The (o-vinylphenoxy)ketenes are clearly more reactive than the (o-allylphenoxy)ketenes and provide much better yields of the cycloaddition products because of electronic effects in the transition state in the cycloaddition process. The intramolecular [2+2] cycloadditions of keteniminium salts were included in this study as a more electrophilic alternative to ketenes that will react with less nucleophilic carbon-carbon double bonds. However, the use of keteniminium salts instead of ketenes in Intramolecular cycloadditions does have some limitations. The synthesis of benzofurans via the intramolecular [2+2] cycloadditions of (o-acylphenoxy)ketenes was accomplished. The initially formed ß-lactone cycloaddition products spontaneously underwent …

Pyrolysis-capillary gas chromatography combined with FID, ECD and MS detection were used to characterize refuse-derived fuel and aquatic fulvic acids. Different pyrolysis methods and programs were evaluated. Pyrolysis temperatures of 700-800°C produced the strongest signal for organics present in RDF and fulvic acid. Cellulose and fatty acids pyrolyzates were identifiable by GC-MS following preparative pyrolysis fractionation. At organic chloride content of 0.023%, only three halogenated compounds were detected in the GC-MS of the fractions. None of the priority pollutants were detected at lower detection limit of 0.72 to 24 mg/ kg RDF. Selective solvent extraction improves the reproduciblities of the technique and allows the detection of polymeric structures. Pyrograms of polyvinyl chloride and regular typing paper showed some common peaks that are present in the RDF pyrogram. About 65% of the peaks in the RDF pyrogram might be of paper origin. The organic chloride content of the RDF was evaluated by ion chromatography of the trapped pyrolyzates in 2% NaOH trap and it was found to be 221 mg Cl/ kg dry RDF. Pyrolysis conditions and temperature programs for FA were systematically evaluated. Samples included purified FA, methylated FA and HPLC separated fractions. Characteristic pyrograms were developed. Profiles of benzene, …

The site of initial metal-carbonyl bond-breaking during ligand-exchange reactions in a series of octahedral metal carbonyls of the type (L2)M(CO)4 (M = Cr, Mo, W; L2 = diphos, phen, dipy) has been determined employing infrared spectroscopy and Fourier transform nuclear magnetic resonance spectroscopy. The results of this study reveal, for all metal carbonyl complexes of the type mentioned above, that loss of CO occurs exclusively at an axial position (cis to the bidentate ligand, I^)• The dynamic nature of the five-coordinate intermediates, such as (diphos)Mo(CO)3, (phen)M(CO)3 (M = Cr, Mo, W), and (dipy)Cr(CO)3, which are generated in solution upon CO dissociation, is reported and discussed. The results of this investigation confirm that these intermediates are fluxional on the time scale of CO-exchange process. A mechanism which describes the site of initial metal-carbonyl bond-breaking and the fluxionality of the five-coordinate intermediate during ligand-exchange reactions in the complexes (L2)M(CO)4 is proposed. A kinetic study of reactions of W(CO)6 with pseudo-halide anions (NCS-, NCO-, CN-) has been initiated. The results indicate that these reactions proceed via a bimolecular path, which involves initial attack of the pseudo-halide anion at a carbonyl carbon of W(CO)6,

A series of dihydroxy bridged copper(II) complexes of the type [(L)Cu(OH)₂Cu(L)]x₂ * nH₂0, where L is 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine or 1,10-phenanthroline, x is a counter ion, and n is the number of water molecules, was synthesized. In the case of monohydroxy bridged copper(II) complexes, we have found a new method of synthesis for [ (L)₂Cu(OH)Cu(L)₂ ] (ClO₄)₃, where L is 2,2'-bipyridine or 1,10-phenanthroline. We have synthesized five new monohydroxy bridged copper(II) complexes, thus increasing the number of monohydroxy bridged copper(II) complexes to nine. All complexes have been characterized by infrared spectroscopy, UV-visible spectroscopy, magnetic moments, and elemental analysis. The electron spin resonance results establish that the fulvic acids contain organic free radicals as an internal part of their molecular structure. The concentration of unpaired electrons will increase by increasing the pH. The unpaired electron in fulvic acid interacts with the unpaired electron on copper(II) through the Π system, and this will decrease the spin concentration of fulvic acid complexed with copper(II). The displacement of titration curve from a free ligand (fructose-1,6-diphosphate, ribulose-1,5-diphosphate, phospherine, phosphothreonine, and 3-phosphoglyceric acid, to a ligand plus copper(II) (1:1 ratio) shows there is a strong interaction between copper(II) and the corresponding ligand. All complexes absorb UV-visible at …

This work presents the development of a new highly sensitive and selective chemical assay for poly(ADP-ribose) which is routinely useful for the determination of polymer levels in vivo. This method was used to carefully measure poly(ADP-ribose) levels in normal and in DNA-damaged cells. The results of these studies strongly suggest that synthesis of poly(ADP-ribose) is involved in some aspect of DNA repair. A review of the literature is presented in the introduction of this work. Poly(ADP-ribose) synthesis has been implicated in aspects of transcription, in DNA syn thesis, and in DNA repair largely based on evidence from in vitro studies. It is apparent that current methodology has not allowed the routine quantification of poly(ADP-ribose) in vivo, hence the lack of i^n vivo data concerning the function(s) of the polymer. The body of this work presents the development of two chemical methods for the quantification of poly(ADP-ribose) and the application of one of these methods to the measurement of polymer levels in normal and DNA-damaged cells. Preliminary studies are presented on the utilization of combined gas chromatography/mass spectroscopy for the selective quantification of nucleoside derivatives. A second method makes use of the unique chemistry of the polymer for quantification. The polymer …

The glyoxalase system, which has been known since 1913, is widely distributed in nature. The system consists of two enzymes, glyoxalase I and glyoxalase II. Methylglyoxal is very unstable and undergoes oxidation and polymerization reactions. One of the purposes of this study was to find a simple, convenient and reproducible method of methylglyoxal preparation. Another objective was the purification of both glyoxalase enzymes employing affinity chromatography as a major step. The purified enzymes were to be characterized by chemical, physical and kinetic properties as an approach to the understanding of the biological function of the system.

The synthesis of E- and Z-1,1,2,3-tetramethylsilacyclobutanes is described. Pyrolysis of either isomer at 398.2 °C provides the same products but in different amounts: propene, E- and Z-2-butene, allylethyldimethylsilane, dimethylpropylsilane, the respective geometric isomers, 1,1,2,3,3-pentamethyl-1,3-disilacyclobutane, 1,1, l-ethyldimethyl-2,2,2-vinyldimethyl-disilane and E- and Z-1,1,2,3,3,4-hexamethyl-1,3-disilacyclobutane. Mechanisms involving di- and trimethylsilenes are described for disilane formation and rate constants of the elementary steps for the fragmentation reactions are reported. Photochemically generated dimethylsilylene in the hydrocarbon solution inserts into the cyclic Ge-C or Si-C bonds of 1,1-dimethylgerma- or silacyclobutane to produce 1-germa-2-sila- or 1,2-disilacyclopentane. The relative reactivities of 1,1-dimethylgerma- and silacyclobutanes toward the dimethylsilylene have been determined. The carbenoid resulting from the cuprous chloride catalyzed decomposition of diazomethane at 25 °C in cyclohexane reacts with 1,1-dimethylgermacyclobutane to give, surprisingly 1,1,5,5-tetramethyl-1,5-digermacyclooctane as the major product. The reactions of the carbenoid with 1,1-dimethylsilacyclobutane are described. The kinetics of gas phase thermal decomposition of 1,1-dimethylgermacyclobutane has been studied over the temperature range, 684 - 751 K at pressures near 14 Torr. The Arrhenius parameters for the formation of ethylene are k_1 (s^-1) = 10^(14.6 ± 0.3) exp (62.7 ± 2.9 kcal mol^-1/RT) and those for the formation of propene and cyclopropane are k_2 (s^-1) = 10^(14.0 ± 0.1 ) exp …

Several chromatographic and spectroscopic techniques were applied to Suwanne River reference fulvic acids (FA) and their permethylated derivatives. Retention mechanisms, structural characteristics, and thermal stabilities of FA and its derivatives and fractions were evaluated.

The hydration behavior of the calcium aluminates as a function of the glass content, the curing temperature, and the water-solid ratio was investigated. In order to keep them from influencing the results, the free-lime content and the surface area of all samples were kept constant, whenever possible. Samples were hydrated with a water-solid ratio of 10/1 for periods of 1 to 90 days. Three curing temperatures were studied; 2°C, 25°C, and 50°C. Samples were hydrated in tightly sealed polyethylene containers to prevent reactions with atmospheric carbon dioxide. The hydration was followed by X-ray diffraction and thermal analysis. Only two samples, Hexacalcium Tetra-alumino Magnesium Silicate and Tricalcium Magnesium Dialuminate, were successfully prepared in an amorphous form. These compounds were used to investigate the effect of glass content on the hydration behavior. Results indicate that when the glass content is increased a corresponding increase is found in the percent combined water. Samples hydrated at 25°C were influenced by changes in the glass content to a greater degree than were those hydrated at either 2°C or 50°C. The effect of the water-solid ratio on the hydration behavior of the calcium aluminates was studied using the compounds; Hexacalcium Tetra-Alumino Magnesium Silicate/ and Dodecacalcium Hepta-Aluminate. …

The purpose of this investigation was to provide a systematic study of the cycloaddition pf (N-alkyl-N-phenylamino)- methoxy-and dichloroketenes to various imines and to investigate the stereochemistry of these cycloadditions.