This thesis utilizes the binary encounter approximation to calculate the stopping power of protons penetrating silicon. The main goal of the research was to make predictions of the stopping power of silicon for low-energy and medium-energy channelled protons, in the hope that this will motivate experiments to test the theory developed below. In attaining this goal, different stopping power theories were compared and the binary encounter approach was applied to random (non-channelled) and high-energy channelled protons in silicon, and these results were compared with experimental data.

For a spectroscopy purpose, we are interested in producing continuous wave (CW) UV laser light at 243 nm with at least 2 mW power. The theory of nonlinear optics suggests that we should be able to produce a desired 2.9 mW of 243 nm light by second harmonic generation (SHG) from a 50 mW blue laser at 486 nm using a BBO crystal in a build up cavity. The most important physical parameters are calculated. A 10 mm Brewster cut BBO crystal can provide phase matching conditions for coupling two ordinary photons at 486 nm and make a secondary beam at 243 nm. The single pass conversion efficiency is calculated not to be enough to generate 2.9 mW of SH light. My investigation shows that a standing wave build up cavity can provide a buildup factor of 94 and an overall conversion efficiency of 5.9% if one use an input coupler mirror with 1.1% transmission at 486 nm.

We examined CVD grown polycrystalline diamond films having different methane concentrations to detect defects and study the possible correlation between the methane concentration used during the growth process and the defect density. SEM and Raman results show that the amorphous and sp2 carbon content of the films increases with methane concentration. Furthermore, photoelectric emission from diamond is confirmed to be a two-photon process, hence the electrons are emitted from normally unoccupied states. We found that the photoelectric yield, for our samples, decreases with the increase in methane concentration. This trend can be accounted for in two different ways: either the types of defects observed in this experiment decrease in density as the methane concentration increases; or, the defect density stays the same or increases, but the increase in methane concentration leads to an increase in the electron affinity, which reduces the overall photoelectric yield.

This thesis relates a technique for increasing the optical strength of NaCl and KCl single-crystal samples. The 1.06-μm pulsed laser damage thresholds were increased by factors as large as 4.6 for a bulk NaCl single-crystal sample. The bulk laser damage breakdown threshold (LDBT) of the crystal was measured prior to and after heat treatment at 800*C using a Nd:YAG laser operating at 1.06 μm. Bulk and surface LDBTs were also studied on samples annealed at 400° C. These samples showed differences in damage morphology on both cleaved and polished surfaces, and the cleaved surfaces had improved damage thresholds. However, neither the polished surfaces nor the bulk showed improved threshold at the lower annealing temperature.

Recent experimentation with excitation of surface plasmons on a gold film in the Kretschmann configuration have shown what appears to be a superconductive effect. Researchers claimed to see the existence of electron pairing during scattering as well as magnetic field repulsion while twisting the polarization of the laser. In an attempt to explain this, they pointed to a combination of electron-electron scattering in external fields as well as dynamic screening via intense laser radiation. This paper expands upon the latter, taking a look at the properties of a dynamic polarization function, its effects on bulk and surface plasmon dispersion relations, and its various consequences.

The finite element method (FEM) is reviewed and applied to the one-dimensional eigensystems of the isotropic harmonic oscillator, finite well, infinite well and radial hydrogen atom, and the two-dimensional eigensystems of the isotropic harmonic oscillator and the propagational modes of sound in a rectangular cavity. Computer codes that I developed were introduced and utilized to find accurate results for the FEM eigensolutions. One of the computer codes was modified and applied to the one-dimensional unbound quantum mechanical system of a square barrier potential and also provided accurate results.

Resonant cavity controlled klystron frequency stabilization circuits and quartz-crystal oscillator frequency stabilization circuits were investigated for reflex klystrons operating at frequencies in the X-band range. The crystal oscillator circuit employed achieved better than 2 parts in 10 in frequency stability. A test of the functional properties of the frequency standard was made using the Stark effect in molecules.

Maxwell's equations are obtained from Coulomb's Law using special relativity. For the derivation, tensor analysis is used, charge is assumed to be a conserved scalar, the Lorentz force is assumed to be a pure force, and the principle of superposition is assumed to hold. Einstein's gravitational field equation is obtained from Newton's universal law of gravitation. In order to proceed, the principle of least action for gravity is shown to be equivalent to the maximization of proper time along a geodesic. The conservation of energy and momentum is assumed, which, through the use of the Bianchi identity, results in Einstein's field equation.

Although the study of surface segregation has a great technological importance, the work done in the field was for a long time largely restricted to experimental studies and the theoretical work was neglected. However, recent improvements in both first principles and semi-empirical methods are opening a new era for surface scientists. A method developed by Bozzolo, Ferrante, and Smith (BFS) is particularly suitable for complex systems and several aspects of the computational modeling of surfaces and segregation, including alloy surface segregation, structure and composition of alloy surfaces and the formation of surface alloys. In the following work I introduce the BFS method and apply it to model the Ni-Al alloy through a Monte-Carlo simulation. A comparison between my results and those results published by the group mentioned above was my goal. This thesis also includes a detailed explanation of the application of the BFS method to surfaces of multi-component metallic systems, beyond binary alloys.

The Feynman path integral formulation of quantum mechanics is a path integral representation for a propagator or probability amplitude in going between two points in space-time. The wave function is expressed in terms of an integral equation from which the Schrodinger equation can be derived. On taking the limit h — 0, the method of stationary phase can be applied and Newton's second law of motion is obtained. Also, the condition the phase vanishes leads to the Hamilton - Jacobi equation. The secondary objective of this paper is to study ways of relating quantum mechanics and classical mechanics. The Ehrenfest theorem is applied to a particle in an electromagnetic field. Expressions are found which are the hermitian Lorentz force operator, the hermitian torque operator, and the hermitian power operator.

A continuous cloud chamber would be a valuable asset to laboratory work in nuclear and atomic physics. For this reason the construction and investigation of a continuously sensitive diffusion cloud chamber has been undertaken. It is the purpose of this paper to report the design and operating characteristics of such a chamber.

The purpose of this study was to investigate the polymorphism of a group of related compounds. Special emphasis was placed upon the temperature at which transitions occurred and a possible correlation of these temperatures with other properties of the compounds.

In view of the advantages of its type, the decision to construct a neutron source of the particle accelerator type was made. The purpose of this thesis is to survey the problems encountered in the construction of the source.

In seismic field operations complex problems often arise which cannot be solved mathematically. In recent years investigators in both the commercial and academic fields have begun to approach the problems of elastic wave propagation by the use of seismic scale models. This thesis discusses the results measured from simulated seismic activity on a scale model built by the researcher.

It is the purpose of this paper to present experimental data for the determination of the dielectric constant and the dipole moments for a series of olefenic diesters of the cis and trans configurations.

The problem with which we shall concern ourselves in this paper is the self-scattering and self-absorption of beta particles by the source.

This paper describes the construction of a positive ion source of the electrodeless discharge type and may be divided into two main topis; (1) the radio frequency oscillator and power amplifier and associated power supply and (2) the ionization chamber.

The problem with which this paper is concerned has as its basis one of the most important properties of the conjugated system of double bonds found in some organic molecules, namely, the ability to exhibit stereoisomerism.

This thesis is a study of the phenomenon of superconductivity.

A study of procedures and techniques of measuring dielectric constant and dipole moment of liquids.

This thesis is a continuation of a study of molecular moments begun by Joseph T. Fielder. In his paper he discussed the theory and the equipment necessary for such a study. It is the purpose of this paper to set forth modifications of his equipment, to present data obtained with this modified equipment, and to interpret this data.

This thesis describes the construction of an apparatus to measure reverberation time.

Using the concept of the build-up cavity for second harmonic generation to produce 243nm laser light, an innovative cavity is theoretically explored using a 15mm length CLBO crystal. In order to limit the losses of the cavity, the number of effective optical surfaces is kept to only four and the use of a MgF2 crystal is adopted to separate the harmonic and fundamental laser beam from each other. The cavity is shown to have an expected round trip loss of five tenths of a percent or better, resulting in a conversion efficiency greater than 65%.

This thesis looks at the transport phenomena in indium arsenide at low temperatures.