We extend the Jinni mobile agent architecture with a multicast network transport layer, an agent-to-agent delegation mechanism and a reflection based Prolog-to-Java interface. To ensure that our agent infrastructure runs efficiently, independently of router-level multicast support, we describe a blackboard based algorithm for locating a randomly roaming agent. As part of the agent-to-agent delegation mechanism, we describe an alternative to code-fetching mechanism for stronger mobility of mobile agents with less network overhead. In the context of direct and reflection based extension mechanisms for Jinni, we describe the design and the implementation of a reflection based Prolog-to-Java interface. The presence of subtyping and method overloading makes finding the most specific method corresponding to a Prolog call pattern fairly difficult. We describe a run-time algorithm which provides accurate handling of overloaded methods beyond Java's reflection package's limitations.

In this research, the application of intelligent mobile agents to the management of distributed network environments is investigated. Intelligent mobile agents are programs which can move about network systems in a deterministic manner in carrying their execution state. These agents can be considered an application of distributed artificial intelligence where the (usually small) agent code is moved to the data and executed locally. The mobile agent paradigm offers potential advantages over many conventional mechanisms which move (often large) data to the code, thereby wasting available network bandwidth. The performance of agents in network routing and knowledge acquisition has been investigated and simulated. A working mobile agent system has also been designed and implemented in JDK 1.2.

Distributed simulation is an enabling concept to support the networked interaction of models and real world elements that are geographically distributed. This technology has brought a new set of challenging problems to solve, such as Data Distribution Management (DDM). The aim of DDM is to limit and control the volume of the data exchanged during a distributed simulation, and reduce the processing requirements of the simulation hosts by relaying events and state information only to those applications that require them. In this thesis, we propose a new DDM scheme, which we refer to as dynamic grid-based DDM. A lightweight UNT-RTI has been developed and implemented to investigate the performance of our DDM scheme. Our results clearly indicate that our scheme is scalable and it significantly reduces both the number of multicast groups used, and the message overhead, when compared to previous grid-based allocation schemes using large-scale and real-world scenarios.

Burrows-Wheeler compression is a three stage process in which the data is transformed with the Burrows-Wheeler Transform, then transformed with Move-To-Front, and finally encoded with an entropy coder. Move-To-Front, Transpose, and Frequency Count are some of the many algorithms used on the List Update problem. In 1985, Competitive Analysis first showed the superiority of Move-To-Front over Transpose and Frequency Count for the List Update problem with arbitrary data. Earlier studies due to Bitner assumed independent identically distributed data, and showed that while Move-To-Front adapts to a distribution faster, incurring less overwork, the asymptotic costs of Frequency Count and Transpose are less. The improvements to Burrows-Wheeler compression this work covers are increases in the amount, not speed, of compression. Best x of 2x-1 is a new family of algorithms created to improve on Move-To-Front's processing of the output of the Burrows-Wheeler Transform which is like piecewise independent identically distributed data. Other algorithms for both the middle stage of Burrows-Wheeler compression and the List Update problem for which overwork, asymptotic cost, and competitive ratios are also analyzed are several variations of Move One From Front and part of the randomized algorithm Timestamp. The Best x of 2x - 1 family includes Move-To-Front, …

Resources are said to be fragmented in the network when they are available in non-contiguous blocks, and calls are dropped as they may not end sufficient resources. Hence, available resources may remain unutilized. In this thesis, the effect of resource fragmentation (RF) on RSVP-controlled networks was studied and new algorithms were proposed to reduce the effect of RF. In order to minimize the effect of RF, resources in the network are dynamically redistributed on different paths to make them available in contiguous blocks. Extra protocol messages are introduced to facilitate resource redistribution in the network. The Dynamic Resource Redistribution (DRR) algorithm when used in conjunction with RSVP, not only increased the number of calls accommodated into the network but also increased the overall resource utilization of the network. Issues such as how many resources need to be redistributed and of which call(s), and how these choices affect the redistribution process were investigated. Further, various simulation experiments were conducted to study the performance of the DRR algorithm on different network topologies with varying traffic characteristics.

Mobile agent technology presents an attractive alternative to the client-server paradigm for several network and real-time applications. However, for most applications, the lack of a viable agent security model has limited the adoption of the agent paradigm. This thesis presents a security model for mobile agents based on a security infrastructure for Computational Grids, and specifically, on X.509 Proxy Certificates. Proxy Certificates serve as credentials for Grid applications, and their primary purpose is temporary delegation of authority. Exploiting the similarity between Grid applications and mobile agent applications, this thesis motivates the use of Proxy Certificates as credentials for mobile agents. A new extension for Proxy Certificates is proposed in order to make them suited to mobile agent applications, and mechanisms are presented for agent-to-host authentication, restriction of agent privileges, and secure delegation of authority during spawning of new agents. Finally, the implementation of the proposed security mechanisms as modules within a multi-lingual and modular agent infrastructure, the Distributed Agent Delivery System, is discussed.

The purpose of this thesis is to present a comprehensive colligation of applications of mobile agents in networks, and provide a baseline association of these systems. This work has been motivated by the fact that mobile agent systems have been deemed proficuous alternatives in system applications. Several mobile agent systems have been developed to provide scalable and cogent solutions in network-centric applications. This thesis examines some existing mobile agent systems in core networking areas, in particular, those of network and resource management, routing, and the provision of fault tolerance and security. The inherent features of these systems are discussed with respect to their specific functionalities. The applicability and efficacy of mobile agents are further considered in the specific areas mentioned above. Although an initial foray into a collation of this nature, the goal of this annotated bibliography is to provide a generic referential view of mobile agent systems in network applications.

In response to the recent intensive needs for civilian security surveillance, both full and compact versions of a Multimedia Security Surveillance (MSS) system have been built up. The new Microsoft DirectShow technology was applied in implementing the multimedia stream-processing module. Through Microsoft Windows Driver Model interface, the chosen IEEE1394 enabled Fire-i cameras as external sensors are integrated with PC based continuous storage unit. The MSS application also allows multimedia broadcasting and remote controls. Cost analysis is included.

Visualization of trivariate functions and vector fields with three components in scientific computation is still a hard problem in compute graphic area. People build their own visualization packages for their special purposes. And there exist some general-purpose packages (MatLab, Vis5D), but they all require extensive user experience on setting all the parameters in order to generate images. We present a simple package to produce simplified but productive images of 3-D vector fields. We used this method to render the magnetic field and current as solutions of the Ginzburg-Landau equations on a 3-D domain.

Mobile agents require an appropriate platform that can facilitate their migration and execution. In particular, the design and implementation of such a system must balance several factors that will ensure that its constituent agents are executed without problems. Besides the basic requirements of migration and execution, an agent system must also provide mechanisms to ensure the security and survivability of an agent when it migrates between hosts. In addition, the system should be simple enough to facilitate its widespread use across large scale networks (i.e Internet). To address these issues, this thesis discusses the design and implementation of the Distributed Agent Delivery System (DADS). The DADS provides a de-coupled design that separates agent acceptance from agent execution. Using functional modules, the DADS provides services ranging from language execution and security to fault-tolerance and compression. Modules allow the administrator(s) of hosts to declare, at run-time, the services that they want to provide. Since each administrative domain is different, the DADS provides a platform that can be adapted to exchange heterogeneous blends of agents across large scale networks.

Operatorless Prolog text is LL(1) in nature and any standard LL parser generator tool can be used to parse it. However, the Prolog text that conforms to the ISO Prolog standard allows the definition of dynamic operators. Since Prolog operators can be defined at run-time, operator symbols are not present in the grammar rules of the language. Unless the parser generator allows for some flexibility in the specification of the grammar rules, it is very difficult to generate a parser for such text. In this thesis we discuss the existing parsing methods and their modified versions to parse languages with dynamic operator capabilities. Implementation details of a parser using Javacc as a parser generator tool to parse standard Prolog text is provided. The output of the parser is an “Abstract Syntax Tree” that reflects the correct precedence and associativity rules among the various operators (static and dynamic) of the language. Empirical results are provided that show that a Prolog parser that is generated by the parser generator like Javacc is comparable in efficiency to a hand-coded parser.

Streaming multimedia content with UDP has become popular over distributed systems such as an Internet. This may encounter many losses due to dropped packets or late arrivals at destination since UDP can only provide best effort delivery. Even UDP doesn't have any self-recovery mechanism from congestion collapse or bursty loss to inform sender of the data to adjust future transmission rate of data like in TCP. So there is a need to incorporate various control schemes like forward error control, interleaving, and congestion control and error concealment into real-time transmission to prevent from effect of losses. Loss can be repaired by retransmission if roundtrip delay is allowed, otherwise error concealment techniques will be used based on the type and amount of loss. This paper implements the interleaving technique with packet spacing of varying interleaver block size for protecting real-time data from loss and its effect during transformation across the Internet. The packets are interleaved and maintain some time gap between two consecutive packets before being transmitted into the Internet. Thus loss of packets can be reduced from congestion and preventing loss of consecutive packets of information when a burst of several packets are lost. Several experiments have been conducted with …

This thesis presents algorithms to utilize the wireless bandwidth efficiently and at the same time meet the quality of service (QoS) requirements of the users. In the proposed algorithms we present an adaptive frame structure based upon the airlink frame loss probability and control the admission of call requests into the system based upon the load on the system and the QoS requirements of the incoming call requests. The performance of the proposed algorithms is studied by developing analytical formulations and simulation experiments. Finally we present an admission control algorithm which uses an adaptive delay computation algorithm to compute the queuing delay for each class of traffic and adapts the service rate and the reliability in the estimates based upon the deviation in the expected and obtained performance. We study the performance of the call admission control algorithm by simulation experiments. Simulation results for the adaptive frame structure algorithm show an improvement in the number of users in the system but there is a drop in the system throughput. In spite of the lower throughput the adaptive frame structure algorithm has fewer QoS delay violations. The adaptive call admission control algorithm adapts the call dropping probability of different classes of …

As bandwidth constraints on LAN/WAN environments decrease, the demand for distributed services will continue to increase. In particular, the proliferation of user-level applications requiring high-capacity distributed file storage systems will demand that such services be universally available. At the same time, the advent of high-speed networks have made the deployment of application and communication solutions based upon an Intelligent Mobile Agent (IMA) framework practical. Agents have proven to present an ideal development paradigm for the creation of autonomous large-scale distributed systems, and an agent-based communication scheme would facilitate the creation of independently administered distributed file services. This thesis thus outlines an architecture for such a distributed file system based upon an IMA communication framework.

As the use of virtual environments (VEs) is becoming more widespread, user needs are becoming a more significant part in those environments. In order to adapt to the needs of the user, a system should be able to infer user interests and goals. I developed an architecture for user modeling to understand users' interests in a VE by monitoring their actions. In this paper, I discussed the architecture and the virtual environment that was created to test it. This architecture employs sensors to keep track of all the users' actions, data structures that can store a record of significant events that have occurred in the environment, and a rule base. The rule base continually monitors the data collected from the sensors, world state, and event history in order to update the user goal inferences. These inferences can then be used to modify the flow of events within a VE.

Due to the growing need of the Internet and networking technologies, simple, powerful, easily maintained distributed applications needed to be developed. These kinds of applications can benefit greatly from distributed computing concepts. Despite its powerful mechanisms, Jini has yet to be accepted in mainstream Java development. Until that happens, we need to find better Remote Method Invocation (RMI) solutions. Feasibility of implementation of Multicasting in RMI is worked in this paper. Multicasting capability can be used in RMI using Jini-like technique. Support of Multicast over Unicast reference layer is also studied. A piece of code explaining how it can be done, is added.

Online/offline signature schemes are useful in many situations, and two such scenarios are considered in this dissertation: bursty server authentication and embedded device authentication. In this dissertation, new techniques for online/offline signing are introduced, those are applied in a variety of ways for creating online/offline signature schemes, and five different online/offline signature schemes that are proved secure under a variety of models and assumptions are proposed. Two of the proposed five schemes have the best offline or best online performance of any currently known technique, and are particularly well-suited for the scenarios that are considered in this dissertation. To determine if the proposed schemes provide the expected practical improvements, a series of experiments were conducted comparing the proposed schemes with each other and with other state-of-the-art schemes in this area, both on a desktop class computer, and under AVR Studio, a simulation platform for an 8-bit processor that is popular for embedded systems. Under AVR Studio, the proposed SGE scheme using a typical key size for the embedded device authentication scenario, can complete the offline phase in about 24 seconds and then produce a signature (the online phase) in 15 milliseconds, which is the best offline performance of any known …

With the advances in very large scale integration (VLSI) technology, hundreds of billions of transistors can be packed into a single chip. With the increased hardware budget, how to take advantage of available hardware resources becomes an important research area. Some researchers have shifted from control flow Von-Neumann architecture back to dataflow architecture again in order to explore scalable architectures leading to multi-core systems with several hundreds of processing elements. In this dissertation, I address how the performance of modern processing systems can be improved, while attempting to reduce hardware complexity and energy consumptions. My research described here tackles both central processing unit (CPU) performance and memory subsystem performance. More specifically I will describe my research related to the design of an innovative decoupled multithreaded architecture that can be used in multi-core processor implementations. I also address how memory management functions can be off-loaded from processing pipelines to further improve system performance and eliminate cache pollution caused by runtime management functions.

An increasingly promising and widespread topic of research in distributed computing is the mobile agent paradigm: code travelling and performing computations on remote hosts in an autonomous manner. One of the biggest challenges faced by this new paradigm is security. The issue of protecting sensitive code and data carried by a mobile agent against tampering from a malicious host is particularly hard but important. Based on secure multi-party computation, a recent research direction shows the feasibility of a software-only solution to this problem, which had been deemed impossible by some researchers previously. The best result prior to this dissertation is a single-agent protocol which requires the participation of a trusted third party. Our research employs multi-agent protocols to eliminate the trusted third party, resulting in a protocol with minimum trust assumptions. This dissertation presents one of the first formal definitions of secure mobile agent computation, in which the privacy and integrity of the agent code and data as well as the data provided by the host are all protected. We present secure protocols for mobile agent computation against static, semi-honest or malicious adversaries without relying on any third party or trusting any specific participant in the system. The security of …

Syntactic parsing is one of the best understood language processing applications. Since language and grammar have been formally defined, it is easy for computers to parse the syntactic structure of natural language text. Does meaning have structure as well? If it has, how can we analyze the structure? Previous systems rely on a one-to-one correspondence between syntactic rules and semantic rules. But such systems can only be applied to limited fragments of English. In this thesis, we propose a general-purpose shallow semantic parser which utilizes a semantic network (WordNet), and a frame dataset (FrameNet). Semantic relations recognized by the parser are based on how human beings represent knowledge of the world. Parsing semantic structure allows semantic units and constituents to be accessed and processed in a more meaningful way than syntactic parsing, moving the automation of understanding natural language text to a higher level.

Automatic memory management is crucial in implementation of runtime systems even though it induces a significant computational overhead. In this thesis I explore the use of statistical properties of the directed graph describing the set of live data to decide between garbage collection and heap expansion in a memory management algorithm combining the dynamic array represented heaps with a mark and sweep garbage collector to enhance its performance. The sampling method predicting the density and the distribution of useful data is implemented as a partial marking algorithm. The algorithm randomly marks the nodes of the directed graph representing the live data at different depths with a variable probability factor p. Using the information gathered by the partial marking algorithm in the current step and the knowledge gathered in the previous iterations, the proposed empirical formula predicts with reasonable accuracy the density of live nodes on the heap, to decide between garbage collection and heap expansion. The resulting heuristics are tested empirically and shown to improve overall execution performance significantly in the context of the Jinni Prolog compiler's runtime system.

Content-based image retrieval (CBIR) is the retrieval of images from a collection by means of internal feature measures of the information content of the images. In CBIR systems, text media is usually used only to retrieve exemplar images for further searching by image feature content. This research work describes a new method for integrating multimedia text and image content features to increase the retrieval performance of the system. I am exploring the content-based features of an image extracted from a video to build a storyboard for search retrieval of images. Metadata encoded multimedia features include extracting primitive features like color, shape and text from an image. Histograms are built for all the features extracted and stored in a database. Images are searched based on comparing these histogram values of the extracted image with the stored values. These histogram values are used for extraction of keyframes from a collection of images parsed from a video file. Individual shots of images are extracted from a video clip and run through processes that extract the features and build the histogram values. A keyframe extraction algorithm is run to get the keyframes from the collection of images to build a storyboard of images. In …

The widely used vector model maintains its popularity because of its simplicity, fast speed, and the appeal of using spatial proximity for semantic proximity. However, this model faces a disadvantage that is associated with the vagueness from keywords overlapping. Efforts have been made to improve the vector model. The research on improving document representation has been focused on four areas, namely, statistical co-occurrence of related items, forming term phrases, grouping of related words, and representing the content of documents. In this thesis, we propose the idea-indexing model to improve document representation for the filtering task in IR. The idea-indexing model matches document terms with the ideas they express and indexes the document with these ideas. This indexing scheme represents the document with its semantics instead of sets of independent terms. We show in this thesis that indexing with ideas leads to better performance.

The FrameNet database is being used in a variety of NLP research and applications such as word sense disambiguation, machine translation, information extraction and question answering. The database is currently available in XML format. The XML database though a wholesome way of distributing data in its entireness, is not practical for use unless converted to a more application friendly database. In light of this we have successfully converted the XML database to a relational MySQL™ database. This conversion reduced the amount of data storage amount to less than half. Most importantly the new database enables us to perform fast complex querying and facilitates use by applications and research. We show the steps taken to ensure relational integrity of the data during the refactoring process and a simple demo application demonstrating ease of use.