A Vehicle-collision Learning System Using Driving Patterns on the Road (open access)

A Vehicle-collision Learning System Using Driving Patterns on the Road

Demand of automobiles are significantly growing despite various factors, steadily increasing the average number of vehicles on the road. Increase in the number of vehicles, subsequently increases the risk of collisions, characterized by the driving behavior. Driving behavior is influenced by factors like class of vehicle, road condition and vehicle maneuvering by the driver. Rapidly growing mobile technology and use of smartphones embedded with in-built sensors, provides scope of constant development of assistance systems considering the safety of the driver by integrating with the information obtained from the vehicle on-board sensors. Our research aims at learning a vehicle system comprising of vehicle, human and road by employing driving patterns obtained from the sensor data to develop better systems of safety and alerts altogether. The thesis focusses on utilizing together various data recorded by the in-built embedded sensors in a smartphone to understand the vehicle motion and dynamics, followed by studying various impacts of collision events, types and signatures which can potentially be integrated in a prototype framework to detect variations, alert drivers and emergency responders in an event of collision.
Date: August 2013
Creator: Urs, Chaitra Vijaygopalraj
System: The UNT Digital Library
Effective and Accelerated Informative Frame Filtering in Colonoscopy Videos Using Graphic Processing Units (open access)

Effective and Accelerated Informative Frame Filtering in Colonoscopy Videos Using Graphic Processing Units

Colonoscopy is an endoscopic technique that allows a physician to inspect the mucosa of the human colon. Previous methods and software solutions to detect informative frames in a colonoscopy video (a process called informative frame filtering or IFF) have been hugely ineffective in (1) covering the proper definition of an informative frame in the broadest sense and (2) striking an optimal balance between accuracy and speed of classification in both real-time and non real-time medical procedures. In my thesis, I propose a more effective method and faster software solutions for IFF which is more effective due to the introduction of a heuristic algorithm (derived from experimental analysis of typical colon features) for classification. It contributed to a 5-10% boost in various performance metrics for IFF. The software modules are faster due to the incorporation of sophisticated parallel-processing oriented coding techniques on modern microprocessors. Two IFF modules were created, one for post-procedure and the other for real-time. Code optimizations through NVIDIA CUDA for GPU processing and/or CPU multi-threading concepts embedded in two significant microprocessor design philosophies (multi-core design and many-core design) resulted a 5-fold acceleration for the post-procedure module and a 40-fold acceleration for the real-time module. Some innovative software modules, …
Date: August 2010
Creator: Karri, Venkata Praveen
System: The UNT Digital Library
CMOS Active Pixel Sensors for Digital Cameras: Current State-of-the-Art (open access)

CMOS Active Pixel Sensors for Digital Cameras: Current State-of-the-Art

Image sensors play a vital role in many image sensing and capture applications. Among the various types of image sensors, complementary metal oxide semiconductor (CMOS) based active pixel sensors (APS), which are characterized by reduced pixel size, give fast readouts and reduced noise. APS are used in many applications such as mobile cameras, digital cameras, Webcams, and many consumer, commercial and scientific applications. With these developments and applications, CMOS APS designs are challenging the old and mature technology of charged couple device (CCD) sensors. With the continuous improvements of APS architecture, pixel designs, along with the development of nanometer CMOS fabrications technologies, APS are optimized for optical sensing. In addition, APS offers very low-power and low-voltage operations and is suitable for monolithic integration, thus allowing manufacturers to integrate more functionality on the array and building low-cost camera-on-a-chip. In this thesis, I explore the current state-of-the-art of CMOS APS by examining various types of APS. I show design and simulation results of one of the most commonly used APS in consumer applications, i.e. photodiode based APS. We also present an approach for technology scaling of the devices in photodiode APS to present CMOS technologies. Finally, I present the most modern CMOS …
Date: May 2007
Creator: Palakodety, Atmaram
System: The UNT Digital Library
A nano-CMOS based universal voltage level converter for multi-VDD SoCs. (open access)

A nano-CMOS based universal voltage level converter for multi-VDD SoCs.

Power dissipation of integrated circuits is the most demanding issue for very large scale integration (VLSI) design engineers, especially for portable and mobile applications. Use of multiple supply voltages systems, which employs level converter between two voltage islands is one of the most effective ways to reduce power consumption. In this thesis work, a unique level converter known as universal level converter (ULC), capable of four distinct level converting operations, is proposed. The schematic and layout of ULC are built and simulated using CADENCE. The ULC is characterized by performing three analysis such as parametric, power, and load analysis which prove that the design has an average power consumption reduction of about 85-97% and capable of producing stable output at low voltages like 0.45V even under varying load conditions.
Date: May 2007
Creator: Vadlmudi, Tripurasuparna
System: The UNT Digital Library
Analyzing Microwave Spectra Collected by the Solar Radio Burst Locator (open access)

Analyzing Microwave Spectra Collected by the Solar Radio Burst Locator

Modern communication systems rely heavily upon microwave, radio, and other electromagnetic frequency bands as a means of providing wireless communication links. Although convenient, wireless communication is susceptible to electromagnetic interference. Solar activity causes both direct interference through electromagnetic radiation as well as indirect interference caused by charged particles interacting with Earth's magnetic field. The Solar Radio Burst Locator (SRBL) is a United States Air Force radio telescope designed to detect and locate solar microwave bursts as they occur on the Sun. By analyzing these events, the Air Force hopes to gain a better understanding of the root causes of solar interference and improve interference forecasts. This thesis presents methods of searching and analyzing events found in the previously unstudied SRBL data archive. A new web-based application aids in the searching and visualization of the data. Comparative analysis is performed amongst data collected by SRBL and several other instruments. This thesis also analyzes events across the time, intensity, and frequency domains. These analysis methods can be used to aid in the detection and understanding of solar events so as to provide improved forecasts of solar-induced electromagnetic interference.
Date: May 2007
Creator: Kincaid, Cheryl-Annette
System: The UNT Digital Library
Simulink® Based Design and Implementation of a Solar Power Based Mobile Charger (open access)

Simulink® Based Design and Implementation of a Solar Power Based Mobile Charger

Electrical energy is used at approximately the rate of 15 Terawatts world-wide. Generating this much energy has become a primary concern for all nations. There are many ways of generating energy among which the most commonly used are non-renewable and will extinct much sooner than expected. Very active research is going on both to increase the use of renewable energy sources and to use the available energy with more efficiency. Among these sources, solar energy is being considered as the most abundant and has received high attention. The mobile phone has become one of the basic needs of modern life, with almost every human being having one.Individually a mobile phone consumes little power but collectively this becomes very large. This consideration motivated the research undertaken in this masters thesis. The objective of this thesis is to design a model for solar power based charging circuits for mobile phone using Simulink(R). This thesis explains a design procedure of solar power based mobile charger circuit using Simulink(R) which includes the models for the photo-voltaic array, maximum power point tracker, pulse width modulator, DC-DC converter and a battery. The first part of the thesis concentrates on electron level behavior of a solar cell, …
Date: May 2016
Creator: Mukka, Manoj Kumar
System: The UNT Digital Library
Exploring Analog and Digital Design Using the Open-Source Electric VLSI Design System (open access)

Exploring Analog and Digital Design Using the Open-Source Electric VLSI Design System

The design of VLSI electronic circuits can be achieved at many different abstraction levels starting from system behavior to the most detailed, physical layout level. As the number of transistors in VLSI circuits is increasing, the complexity of the design is also increasing, and it is now beyond human ability to manage. Hence CAD (Computer Aided design) or EDA (Electronic Design Automation) tools are involved in the design. EDA or CAD tools automate the design, verification and testing of these VLSI circuits. In today’s market, there are many EDA tools available. However, they are very expensive and require high-performance platforms. One of the key challenges today is to select appropriate CAD or EDA tools which are open-source for academic purposes. This thesis provides a detailed examination of an open-source EDA tool called Electric VLSI Design system. An excellent and efficient CAD tool useful for students and teachers to implement ideas by modifying the source code, Electric fulfills these requirements. This thesis' primary objective is to explain the Electric software features and architecture and to provide various digital and analog designs that are implemented by this software for educational purposes. Since the choice of an EDA tool is based on the …
Date: May 2016
Creator: Aluru, Gunasekhar
System: The UNT Digital Library
Simulink Based Modeling of a Multi Global Navigation Satellite System (open access)

Simulink Based Modeling of a Multi Global Navigation Satellite System

The objective of this thesis is to design a model for a multi global navigation satellite system using Simulink. It explains a design procedure which includes the models for transmitter and receiver for two different navigation systems. To overcome the problem, where less number of satellites are visible to determine location degrades the performance of any positioning system significantly, this research has done to make use of multi GNSS satellite signals in one navigation receiver.
Date: December 2016
Creator: Mukka, Nagaraju
System: The UNT Digital Library
FPGA Implementations of Elliptic Curve Cryptography and Tate Pairing over Binary Field (open access)

FPGA Implementations of Elliptic Curve Cryptography and Tate Pairing over Binary Field

Elliptic curve cryptography (ECC) is an alternative to traditional techniques for public key cryptography. It offers smaller key size without sacrificing security level. Tate pairing is a bilinear map used in identity based cryptography schemes. In a typical elliptic curve cryptosystem, elliptic curve point multiplication is the most computationally expensive component. Similarly, Tate pairing is also quite computationally expensive. Therefore, it is more attractive to implement the ECC and Tate pairing using hardware than using software. The bases of both ECC and Tate pairing are Galois field arithmetic units. In this thesis, I propose the FPGA implementations of the elliptic curve point multiplication in GF (2283) as well as Tate pairing computation on supersingular elliptic curve in GF (2283). I have designed and synthesized the elliptic curve point multiplication and Tate pairing module using Xilinx's FPGA, as well as synthesized all the Galois arithmetic units used in the designs. Experimental results demonstrate that the FPGA implementation can speedup the elliptic curve point multiplication by 31.6 times compared to software based implementation. The results also demonstrate that the FPGA implementation can speedup the Tate pairing computation by 152 times compared to software based implementation.
Date: August 2007
Creator: Huang, Jian
System: The UNT Digital Library

Modeling and reduction of gate leakage during behavioral synthesis of nanoscale CMOS circuits.

Access: Use of this item is restricted to the UNT Community
The major sources of power dissipation in a nanometer CMOS circuit are capacitive switching, short-circuit current, static leakage and gate oxide tunneling. However, with the aggressive scaling of technology the gate oxide direct tunneling current (gate leakage) is emerging as a prominent component of power dissipation. For sub-65 nm CMOS technology where the gate oxide (SiO2) thickness is very low, the direct tunneling current is the major form of tunneling. There are two contribution parts in this thesis: analytical modeling of behavioral level components for direct tunneling current and propagation delay, and the reduction of tunneling current during behavioral synthesis. Gate oxides of multiple thicknesses are useful in reducing the gate leakage dissipation. Analytical models from first principles to calculate the tunneling current and the propagation delay of behavioral level components is presented, which are backed by BSIM4/5 models and SPICE simulations. These components are characterized for 45 nm technology and an algorithm is provided for scheduling of datapath operations such that the overall tunneling current dissipation of a datapath circuit under design is minimal. It is observed that the oxide thickness that is being considered is very low it may not remain constant during the course of fabrication. Hence …
Date: May 2006
Creator: Velagapudi, Ramakrishna
System: The UNT Digital Library
Energy-Aware Time Synchronization in Wireless Sensor Networks (open access)

Energy-Aware Time Synchronization in Wireless Sensor Networks

I present a time synchronization algorithm for wireless sensor networks that aims to conserve sensor battery power. The proposed method creates a hierarchical tree by flooding the sensor network from a designated source point. It then uses a hybrid algorithm derived from the timing-sync protocol for sensor networks (TSPN) and the reference broadcast synchronization method (RBS) to periodically synchronize sensor clocks by minimizing energy consumption. In multi-hop ad-hoc networks, a depleted sensor will drop information from all other sensors that route data through it, decreasing the physical area being monitored by the network. The proposed method uses several techniques and thresholds to maintain network connectivity. A new root sensor is chosen when the current one's battery power decreases to a designated value. I implement this new synchronization technique using Matlab and show that it can provide significant power savings over both TPSN and RBS.
Date: December 2006
Creator: Saravanos, Yanos
System: The UNT Digital Library

Comparison and Evaluation of Existing Analog Circuit Simulator using Sigma-Delta Modulator

Access: Use of this item is restricted to the UNT Community
In the world of VLSI (very large scale integration) technology, there are many different types of circuit simulators that are used to design and predict the circuit behavior before actual fabrication of the circuit. In this thesis, I compared and evaluated existing circuit simulators by considering standard benchmark circuits. The circuit simulators which I evaluated and explored are Ngspice, Tclspice, Winspice (open source) and Spectre® (commercial). I also tested standard benchmarks using these circuit simulators and compared their outputs. The simulators are evaluated using design metrics in order to quantify their performance and identify efficient circuit simulators. In addition, I designed a sigma-delta modulator and its individual components using the analog behavioral language Verilog-A. Initially, I performed simulations of individual components of the sigma-delta modulator and later of the whole system. Finally, CMOS (complementary metal-oxide semiconductor) transistor-level circuits were designed for the differential amplifier, operational amplifier and comparator of the modulator.
Date: December 2006
Creator: Ale, Anil Kumar
System: The UNT Digital Library
Timing and Congestion Driven Algorithms for FPGA Placement (open access)

Timing and Congestion Driven Algorithms for FPGA Placement

Placement is one of the most important steps in physical design for VLSI circuits. For field programmable gate arrays (FPGAs), the placement step determines the location of each logic block. I present novel timing and congestion driven placement algorithms for FPGAs with minimal runtime overhead. By predicting the post-routing timing-critical edges and estimating congestion accurately, this algorithm is able to simultaneously reduce the critical path delay and the minimum number of routing tracks. The core of the algorithm consists of a criticality-history record of connection edges and a congestion map. This approach is applied to the 20 largest Microelectronics Center of North Carolina (MCNC) benchmark circuits. Experimental results show that compared with the state-of-the-art FPGA place and route package, the Versatile Place and Route (VPR) suite, this algorithm yields an average of 8.1% reduction (maximum 30.5%) in the critical path delay and 5% reduction in channel width. Meanwhile, the average runtime of the algorithm is only 2.3X as of VPR.
Date: December 2006
Creator: Zhuo, Yue
System: The UNT Digital Library
VLSI Architecture and FPGA Prototyping of a Secure Digital Camera for Biometric Application (open access)

VLSI Architecture and FPGA Prototyping of a Secure Digital Camera for Biometric Application

This thesis presents a secure digital camera (SDC) that inserts biometric data into images found in forms of identification such as the newly proposed electronic passport. However, putting biometric data in passports makes the data vulnerable for theft, causing privacy related issues. An effective solution to combating unauthorized access such as skimming (obtaining data from the passport's owner who did not willingly submit the data) or eavesdropping (intercepting information as it moves from the chip to the reader) could be judicious use of watermarking and encryption at the source end of the biometric process in hardware like digital camera or scanners etc. To address such issues, a novel approach and its architecture in the framework of a digital camera, conceptualized as an SDC is presented. The SDC inserts biometric data into passport image with the aid of watermarking and encryption processes. The VLSI (very large scale integration) architecture of the functional units of the SDC such as watermarking and encryption unit is presented. The result of the hardware implementation of Rijndael advanced encryption standard (AES) and a discrete cosine transform (DCT) based visible and invisible watermarking algorithm is presented. The prototype chip can carry out simultaneous encryption and watermarking, which …
Date: August 2006
Creator: Adamo, Oluwayomi Bamidele
System: The UNT Digital Library
Occlusion Tolerant Object Recognition Methods for Video Surveillance and Tracking of Moving Civilian Vehicles (open access)

Occlusion Tolerant Object Recognition Methods for Video Surveillance and Tracking of Moving Civilian Vehicles

Recently, there is a great interest in moving object tracking in the fields of security and surveillance. Object recognition under partial occlusion is the core of any object tracking system. This thesis presents an automatic and real-time color object-recognition system which is not only robust but also occlusion tolerant. The intended use of the system is to recognize and track external vehicles entered inside a secured area like a school campus or any army base. Statistical morphological skeleton is used to represent the visible shape of the vehicle. Simple curve matching and different feature based matching techniques are used to recognize the segmented vehicle. Features of the vehicle are extracted upon entering the secured area. The vehicle is recognized from either a digital video frame or a static digital image when needed. The recognition engine will help the design of a high performance tracking system meant for remote video surveillance.
Date: December 2007
Creator: Pati, Nishikanta
System: The UNT Digital Library
A Dual Dielectric Approach for Performance Aware Reduction of Gate Leakage in Combinational Circuits (open access)

A Dual Dielectric Approach for Performance Aware Reduction of Gate Leakage in Combinational Circuits

Design of systems in the low-end nanometer domain has introduced new dimensions in power consumption and dissipation in CMOS devices. With continued and aggressive scaling, using low thickness SiO2 for the transistor gates, gate leakage due to gate oxide direct tunneling current has emerged as the major component of leakage in the CMOS circuits. Therefore, providing a solution to the issue of gate oxide leakage has become one of the key concerns in achieving low power and high performance CMOS VLSI circuits. In this thesis, a new approach is proposed involving dual dielectric of dual thicknesses (DKDT) for the reducing both ON and OFF state gate leakage. It is claimed that the simultaneous utilization of SiON and SiO2 each with multiple thicknesses is a better approach for gate leakage reduction than the conventional usage of a single gate dielectric (SiO2), possibly with multiple thicknesses. An algorithm is developed for DKDT assignment that minimizes the overall leakage for a circuit without compromising with the performance. Extensive experiments were carried out on ISCAS'85 benchmarks using 45nm technology which showed that the proposed approach can reduce the leakage, as much as 98% (in an average 89.5%), without degrading the performance.
Date: May 2006
Creator: Mukherjee, Valmiki
System: The UNT Digital Library
A CAM-Based, High-Performance Classifier-Scheduler for a Video Network Processor. (open access)

A CAM-Based, High-Performance Classifier-Scheduler for a Video Network Processor.

Classification and scheduling are key functionalities of a network processor. Network processors are equipped with application specific integrated circuits (ASIC), so that as IP (Internet Protocol) packets arrive, they can be processed directly without using the central processing unit. A new network processor is proposed called the video network processor (VNP) for real time broadcasting of video streams for IP television (IPTV). This thesis explores the challenge in designing a combined classification and scheduling module for a VNP. I propose and design the classifier-scheduler module which will classify and schedule data for VNP. The proposed module discriminates between IP packets and video packets. The video packets are further processed for digital rights management (DRM). IP packets which carry regular traffic will traverse without any modification. Basic architecture of VNP and architecture of classifier-scheduler module based on content addressable memory (CAM) and random access memory (RAM) has been proposed. The module has been designed and simulated in Xilinx 9.1i; is built in ISE simulator with a throughput of 1.79 Mbps and a maximum working frequency of 111.89 MHz at a power dissipation of 33.6mW. The code has been translated and mapped for Spartan and Virtex family of devices.
Date: May 2008
Creator: Tarigopula, Srivamsi
System: The UNT Digital Library
An Accelerometer-based Gesture Recognition System for a Tactical Communications Application (open access)

An Accelerometer-based Gesture Recognition System for a Tactical Communications Application

In modern society, computers are primarily interacted with via keyboards, touch screens, voice recognition, video analysis, and many others. For certain applications, these methods may be the most efficient interface. However, there are applications that we can conceive where a more natural interface could be convenient and connect humans and computers in a more intuitive and natural way. These applications are gesture recognition systems and range from the interpretation of sign language by a computer to virtual reality control. This Thesis proposes a gesture recognition system that primarily uses accelerometers to capture gestures from a tactical communications application. A segmentation algorithm is developed based on the accelerometer energy to segment these gestures from an input sequence. Using signal processing and machine learning techniques, the segments are reduced to mathematical features and classified with support vector machines. Experimental results show that the system achieves an overall gesture recognition accuracy of 98.9%. Additional methods, such as non-gesture recognition/suppression, are also proposed and tested.
Date: December 2015
Creator: Tidwell, Robert S., Jr.
System: The UNT Digital Library
Networking of UAVs Using 802.11s (open access)

Networking of UAVs Using 802.11s

The thesis simulates the problem of network connectivity that occurs due to the dynamic nature of a network during flight. Nine nodes are provided with initial positions and are flown based on the path provided by leader-follower control algorithm using the server-client model. The application layer provides a point to point connection between the server and client and by using socket programming in the transport layer, a server and clients are established. Each node performs a neighbor discovery to discover its neighbors in the data link layer and physical layer performs the CSMA/CA using RTS/CTS. Finally, multi hop routing is achieved in network layer. Each client connects with server at dedicated interval to share each other location and then moves to next location. This process is continued over a period of several iterations until the relative distance is achieved. The constraints and limitations of the technology are network connectivity is lack of flexibility for random location of nodes, links established with a distant node having single neighbor is unstable. Performance of a system decreases with increase in number of nodes.
Date: May 2019
Creator: Polumuru, Pushpa
System: The UNT Digital Library
Effects of UE Speed on MIMO Channel Capacity in LTE (open access)

Effects of UE Speed on MIMO Channel Capacity in LTE

With the introduction of 4G LTE, multiple new technologies were introduced. MIMO is one of the important technologies introduced with fourth generation. The main MIMO modes used in LTE are open loop and closed loop spatial multiplexing modes. This thesis develops an algorithm to calculate the threshold values of UE speed and SNR that is required to implement a switching algorithm which can switch between different MIMO modes for a UE based on the speed and channel conditions (CSI). Specifically, this thesis provides the values of UE speed and SNR at which we can get better results by switching between open loop and closed loop MIMO modes and then be scheduled in sub-channels accordingly. Thus, the results can be used effectively to get better channel capacity with less ISI. The main objectives of this thesis are: to determine the type of MIMO mode suitable for a UE with certain speed, to determine the effects of SNR on selection of MIMO modes, and to design and implement a scheduling algorithm to enhance channel capacity.
Date: August 2016
Creator: Shukla, Rahul
System: The UNT Digital Library
Region aware DCT domain invisible robust blind watermarking for color images. (open access)

Region aware DCT domain invisible robust blind watermarking for color images.

The multimedia revolution has made a strong impact on our society. The explosive growth of the Internet, the access to this digital information generates new opportunities and challenges. The ease of editing and duplication in digital domain created the concern of copyright protection for content providers. Various schemes to embed secondary data in the digital media are investigated to preserve copyright and to discourage unauthorized duplication: where digital watermarking is a viable solution. This thesis proposes a novel invisible watermarking scheme: a discrete cosine transform (DCT) domain based watermark embedding and blind extraction algorithm for copyright protection of the color images. Testing of the proposed watermarking scheme's robustness and security via different benchmarks proves its resilience to digital attacks. The detectors response, PSNR and RMSE results show that our algorithm has a better security performance than most of the existing algorithms.
Date: December 2008
Creator: Naraharisetti, Sahasan
System: The UNT Digital Library
A New N-way Reconfigurable Data Cache Architecture for Embedded Systems (open access)

A New N-way Reconfigurable Data Cache Architecture for Embedded Systems

Performance and power consumption are most important issues while designing embedded systems. Several studies have shown that cache memory consumes about 50% of the total power in these systems. Thus, the architecture of the cache governs both performance and power usage of embedded systems. A new N-way reconfigurable data cache is proposed especially for embedded systems. This thesis explores the issues and design considerations involved in designing a reconfigurable cache. The proposed reconfigurable data cache architecture can be configured as direct-mapped, two-way, or four-way set associative using a mode selector. The module has been designed and simulated in Xilinx ISE 9.1i and ModelSim SE 6.3e using the Verilog hardware description language.
Date: December 2009
Creator: Bani, Ruchi Rastogi
System: The UNT Digital Library
Exploring Memristor Based Analog Design in Simscape (open access)

Exploring Memristor Based Analog Design in Simscape

With conventional CMOS technologies approaching their scaling limits, researchers are actively investigating alternative technologies for ever increasing computing and mobile demand. A number of different technologies are currently being studied by different research groups. In the last decade, one-dimensional (1D) carbon nanotubes (CNT), graphene, which is a two-dimensional (2D) natural occurring carbon rolled in tubular form, and zero-dimensional (0D) fullerenes have been the subject of intensive research. In 2008, HP Labs announced a ground-breaking fabrication of memristors, the fourth fundamental element postulated by Chua at the University of California, Berkeley in 1971. In the last few years, the memristor has gained a lot of attention from the research community. In-depth studies of the memristor and its analog behavior have convinced the community that it has the potential in future nano-architectures for optimization of high-density memory and neuromorphic computing architectures. The objective of this thesis is to explore memristors for analog and mixed-signal system design using Simscape. This thesis presents a memristor model in the Simscape language. Simscape has been used as it has the potential for modeling large systems. A memristor based programmable oscillator is also presented with simulation results and characterization. In addition, simulation results of different memristor models …
Date: May 2013
Creator: Gautam, Mahesh
System: The UNT Digital Library
FPGA Implementation of Low Density Party Check Codes Decoder (open access)

FPGA Implementation of Low Density Party Check Codes Decoder

Reliable communication over the noisy channel has become one of the major concerns in the field of digital wireless communications. The low density parity check codes (LDPC) has gained lot of attention recently because of their excellent error-correcting capacity. It was first proposed by Robert G. Gallager in 1960. LDPC codes belong to the class of linear block codes. Near capacity performance is achievable on a large collection of data transmission and storage.In my thesis I have focused on hardware implementation of (3, 6) - regular LDPC codes. A fully parallel decoder will require too high complexity of hardware realization. Partly parallel decoder has the advantage of effective compromise between decoding throughput and high hardware complexity. The decoding of the codeword follows the belief propagation alias probability propagation algorithm in log domain. A 9216 bit, (3, 6) regular LDPC code with code rate ½ was implemented on FPGA targeting Xilinx Virtex 4 XC4VLX80 device with package FF1148. This decoder achieves a maximum throughput of 82 Mbps. The entire model was designed in VHDL in the Xilinx ISE 9.2 environment.
Date: August 2009
Creator: Vijayakumar, Suresh
System: The UNT Digital Library