This paper describes multitasking facilities of Ada in concurrent and real-time programming. Synchronization and process communication mechanisms are discussed in detail, also, a new mechanism to solve the scheduling problem is developed. In the concurrent programming aspect, a comparison is made between Ada's rendezvous and Pascal's Monitor concept. In the real-time programming aspect, the differences between the Ada multitasking and the traditional "cyclic executive approaches are contrasted and their associated costs/benefits analyzed.

The Programmable Logic Array (PLA) has been widely used in the design of VLSI circuits and systems because of its regularity, flexibility, and simplicity. The equivalence problem is typically to verify that the final description of a circuit is functionally equivalent to its initial description. Verifying the functional equivalence of two descriptions is equivalent to proving their logical equivalence. This problem of pure logic is essential to circuit design. The most widely used technique to solve the problem is based on Binary Decision Diagram or BDD, proposed by Bryant in 1986. Unfortunately, BDD requires too much time and space to represent moderately large circuits for equivalence testing. We design and implement a new algorithm called the Cover-Merge Algorithm for the equivalence problem based on a divide-and-conquer strategy using the concept of cover and a derivational method. We prove that the algorithm is sound and complete. Because of the NP-completeness of the problem, we emphasize simplifications to reduce the search space or to avoid redundant computations. Simplification techniques are incorporated into the algorithm as an essential part to speed up the the derivation process. Two different sets of heuristics are developed for two opposite goals: one for the proof of equivalence …

In this thesis, a discrete Markov chain model for analyzing memory interference in multiprocessors, is presented.

This thesis describes regression analysis and shows how it can be used in account auditing and in computer system performance analysis. The study first introduces regression analysis techniques and statistics. Then, the use of regression analysis in auditing to detect "out of line" accounts and to determine audit sample size is discussed. These applications led to the concept of using regression analysis to predict job completion times in a computer system. The feasibility of this application of regression analysis was tested by constructing a predictive model to estimate job completion times using a computer system simulator. The predictive model's performance for the various job streams simulated shows that job completion time prediction is a feasible application for regression analysis.

One of the greatest problems facing researchers in the sub field of Artificial Intelligence known as Intelligent Tutoring Systems (ITS) is the selection of a knowledge base designs that will facilitate the modification of the knowledge base. The Class-Entity-Relationship-Attribute (CERA), proposed by R. P. Brazile, holds certain promise as a more generic knowledge base design framework upon which can be built robust and efficient ITS. This study has a twofold purpose. The first is to demonstrate that a CERA knowledge base can be constructed for an ITS on a subset of the domain of Cretaceous paleontology and function as the "expert module" of the ITS. The second is to test the validity of the ideas that students guided through a lesson learn more factual knowledge, while those who explore the knowledge base that underlies the lesson through query at their own pace will be able to formulate their own integrative knowledge from the knowledge gained in their explorations and spend more time on the system. This study concludes that a CERA-based system can be constructed as an effective teaching tool. However, while an ITS - treatment provides for statistically significant gains in achievement test scores, the type of treatment seems …

The problem with which this research was done was that of applying the IBM360 computer to the analysis of waveforms from a Beckman model 120C liquid chromatograph. Software to interpret these waveforms was written in the PLl language. For a control run, input to the computer consisted of a digital tape containing the raw results of the chromatograph run. Output consisted of several graphs and charts giving the results of the analysis. In addition, punched output was provided which gave the name of each amino acid, its elution time and color constant. These punched cards were then input to the computer as input to the experimental run, along with the raw data on the digital tape. From the known amounts of amino acids in the control run and the ratio of control to experimental peak area, the amino acids of the unknown were quantified. The resulting programs provided a complete and easy to use solution to the problem of chromatographic data analysis.

This investigation dealt with locating and measuring x-ray absorption of radiographic images. The methods developed provide a fast, accurate, minicomputer control, for analysis of embedded objects. A PDP/8 computer system was interfaced with a Joyce Loebl 3CS Microdensitometer and a Leeds & Northrup Recorder. Proposed algorithms for bone location and data smoothing work on a twelve-bit minicomputer. Designs of a software control program and operational procedure are presented. The filter made wedge and limb scans monotonic from minima to maxima. It was tested for various convoluted intervals. Ability to resmooth the same data in multiple passes was tested. An interval size of fifteen works well in one pass.

In this paper the DBase II query language of an RDBMS for personal computers is discussed. Other languages will be provided by large and sophisticated DBMS will not be discussed here. The reason for selecting the DBase II query language for discussion are as follows: 1. It is a simple language that can be learned easily [TOWN 84, DINE 84]. Within a short period, users can learn all of the facilities and manage the system very well. 2. It is a language suitable for interactive programming and execution like BASIC. 3. It provides adequate facilities for a small data base system and serves as an introductory guide for more sophisticated systems.

This problem is intended to be an introduction to the design of a software system which translates PDP-8 assembly language source into it's machine-readable object code. This assembler runs on the IBM 360/50. It is assumed that the reader is familiar with the basic PDP-8 assembly language. For the description and use of this assembler the reader is referred to the PAL-III SYMBOLIC ASSEMBLER PROGRAMMING MANUAL from DEC (order number DIGITAL 8-3-5, Digital Equipment Corporation: Maynard, Massachusetts, 1965.). The Second problem of the study concerns the design of a simulator for the PDP-8 computer.

TRAC is a text-processing language for use with a reactive typewriter. The thesis describes the design and implementation of a TRAC processor for the Fairchild F24 computer. Chapter I introduces some text processing concepts, the TRAC operations, and the implementation procedures. Chapter II examines the history and -characteristics of the TRAC language. The next chapter specifies the TRAC syntax and primitive functions. Chapter IV covers the algorithms used by the processor. The last chapter discusses the design experience from programming the processor, examines the reactive action caused by the processor, and suggests adding external storage primitive functions for a future version of the processor.

Microcomputer-based music synthesis hardware is being developed at North Texas State University (NTSU). The work described in this paper continues this effort to develop hardware designs for inexpensive, but good quality, sound synthesizers. In order to pursue their activities, researchers in computer assisted instruction in music theory, psychoacoustics, and music composition need quality sound sources. The ultimate goal of my research is to develop good quality sound synthesis hardware which can fill these needs economically. This paper explores three topics: 1) how a computer makes music--a short nontechnical description; 2) what has been done previously--a review of the literature; and 3) what factors bear on the quality of microcomputer-based systems, including encoding of musical passages, software development, and hardware design. These topics lead to the discussion of a particular sound synthesizer which the author has designed.

No matter how extended the use of the computer is, the printed document is still the primary medium for the presentation information, and will continue to be for some time. The use of computing facilities for preparation and production of the document is becoming as prevalent as their use for numeric computation. Commercially, document preparation systems are now a standard facility at research institution, and they have become quite common on each computer program. A conventional document preparation system usually contains two parts: a text editor used to create, enter, update, and maintain the text and control words that comprise the document in its "input" form, and a text formatter used to process that input and produce the final document.

Although more sophisticated designs of associative memories are not yet economically practical, with the dynamic advances in integrated circuitry currently taking place, the day appears not long off for an economical sophisticated associative memory to become a reality. This describes a general outline of a sophisticated DLM, but it also describes the actual logic involved in a building a working model. The design process involves formulating a set of commands sufficient to perform the desired algorithms, developing the logic necessary to implement these commands, and finally constructing a working model to test the logic.

The fusion of computers and communications has promised to herald the age of information super-highway over high speed communication networks where the ultimate goal is to enable a multitude of users at any place, access information from anywhere and at any time. This, in a nutshell, is the goal envisioned by the Personal Communication Services (PCS) and Xerox's ubiquitous computing. In view of the remarkable growth of the mobile communication users in the last few years, the radio frequency spectrum allocated by the FCC (Federal Communications Commission) to this service is still very limited and the usable bandwidth is by far much less than the expected demand, particularly in view of the emergence of the next generation wireless multimedia applications like video-on-demand, WWW browsing, traveler information systems etc. Proper management of available spectrum is necessary not only to accommodate these high bandwidth applications, but also to alleviate problems due to sudden explosion of traffic in so called hot cells. In this dissertation, we have developed simple load balancing techniques to cope with the problem of tele-traffic overloads in one or more hot cells in the system. The objective is to ease out the high channel demand in hot cells by …

In this thesis, the gate matrix layout problem in VLSI design is considered where the goal is to minimize the number of tracks required to layout a given circuit and a taxonomy of approaches to its solution is presented. An efficient hybrid heuristic is also proposed for this combinatorial optimization problem, which is based on the combination of probabilistic hill-climbing technique and greedy method. This heuristic is tested experimentally with respect to four existing algorithms. As test cases, five benchmark problems from the literature as well as randomly generated problem instances are considered. The experimental results show that the proposed hybrid algorithm, on the average, performs better than other heuristics in terms of the required computation time and/or the quality of solution. Due to the computation-intensive nature of the problem, an exact solution within reasonable time limits is impossible. So, it is difficult to judge the effectiveness of any heuristic in terms of the quality of solution (number of tracks required). A probabilistic model of the gate matrix layout problem that computes the expected number of tracks from the given input parameters, is useful to this respect. Such a probabilistic model is proposed in this thesis, and its performance is …

This paper is presented in satisfaction of the requirement for two problems in lieu of thesis which are required for the degree, Master of Science. The two problems are: (1) to provide an electric interface between the M6800 microprocessor and the printer; and (2) to design an Arabic character set and to provide the logic required for its implementation. As it would be artificial and impractical to document these problems separately, a single document here is provided.

In this paper, five different sorting methods will be discussed. Each method will be analyzed and discussed in detail pointing out its efficiency, weaknesses, powerfullness, and the appropriate type of applications. The different methods are represented graphically using Turbo Pascal where one pass is performed in each method at a time. The methods discussed in this project are, Bubble Sort, Quick Sort, Heap Sort, Shell Sort, and Double Selection Sort. The latter is a new method that I modified from the Selection Sort. Finally, comparisons between the sorting methods mentioned above will be discussed.

Because of the high cost and impracticality of a high connectivity network, most recent research in transaction processing has focused on a distributed replicated database system. In such a system, multiple copies of a data item are created and stored at several sites in the network, so that the system is able to tolerate more crash and communication failures and attain higher data availability. However, the multiple copies also introduce a global inconsistency problem, especially in a partitioned network. In this dissertation a tree quorum algorithm is proposed to solve this problem, imposing a logical tree structure along with dynamic system reconfiguration on all the copies of each data item. The proposed algorithm can be viewed as a dynamic voting technique which, with the help of an appropriate concurrency control algorithm, exhibits the major advantages of quorum-based replica control algorithms and of the available copies algorithm, so that a single copy is read for a read operation and a quorum of copies is written for a write operation. In addition, read and write quorums are computed dynamically and independently. As a result expensive read operations, like those that require several copies of a data item to be read in most …

This thesis describes a software implementation of the IEEE Floating-Point Standard (IEEE Task P754), which is believed to be an effective system for reliable, accurate computer arithmetic. The standard is implemented as a set of procedures written in Motorola 6809 assembly language. Source listings of the procedures are contained in appendices.

This project focuses on a prototype system architecture which integrates features of an event-driven gate-level simulator and features of the multiple expert system architecture, HEARSAY-II. Combining artificial intelligence and simulation techniques, a knowledge-based simulator was designed and constructed to model non-standard circuit behavior. This non-standard circuit behavior is amplified by advances in integrated circuit technology. Currently available digital circuit simulators can not simulate this behavior. Circuit designer expertise on behavioral phenomena is used in the expert system to guide the base simulator by manipulating its events to achieve the desired behavior.

This thesis presents a simple method for the concurrent manipulation of linearly ordered data structures on hypercubes. The method is based on the existence of a pruned binomial search tree rooted at any arbitrary node of the binary hypercube. The tree spans any arbitrary sequence of n consecutive nodes containing the root, using a fan-out of at most [log₂ 𝑛] and a depth of [log₂ 𝑛] +1. Search trees spanning non-overlapping processor lists are formed using only local information, and can be used concurrently without contention problems. Thus, they can be used for performing broadcast and merge operations simultaneously on sets with non-uniform sizes. Extensions to generalized and faulty hypercubes and applications to image processing algorithms and for m-way search are discussed.

This thesis describes a set of computer program control structures which permits the application of certain structured programming techniques to the IBM/360 assembly language (ALC). The control structures are implemented by programmerdefined instructions known as macros. A history of computer software is presented, providing a basis for the emergence of structured programming. A survey of the major concepts of structured programming with special attention to control structures and their significance to structured programming follows. The macros developed in this study include DO, ENDDO, LEAVE, CASE, and ENDCASE. They provide a looping control structure, a loop-escape construct, and a selective control structure. Examples of usage are given.

This research establishes the feasibility and potential utility of a software mechanism which employs artificial intelligence techniques to enhance the capabilities of standard discrete event simulators. As background, current methods of integrating artificial intelligence with simulation and relevant research are briefly reviewed.

Learning and representing and reasoning about temporal relations, particularly causal relations, is a deep problem in artificial intelligence (AI). Learning such representations in the real world is complicated by the fact that phenomena are subject to multiple time scale influences and may operate with a strange attractor dynamic. This dissertation proposes a new computational learning mechanism, the adaptrode, which, used in a neuromimic processing architecture may help to solve some of these problems. The adaptrode is shown to emulate the dynamics of real biological synapses and represents a significant departure from the classical weighted input scheme of conventional artificial neural networks. Indeed the adaptrode is shown, by analysis of the deep structure of real synapses, to have a strong structural correspondence with the latter in terms of multi-time scale biophysical processes. Simulations of an adaptrode-based neuron and a small network of neurons are shown to have the same learning capabilities as invertebrate animals in classical conditioning. Classical conditioning is considered a fundamental learning task in animals. Furthermore, it is subject to temporal ordering constraints that fulfill the criteria of causal relations in natural systems. It may offer clues to the learning of causal relations and mechanisms for causal reasoning. The …