Advanced Research Projects Agency-Energy project sheet summarizing general information about the Innovative Materials and Processes for Advanced Carbon Capture Technologies (IMPACCT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses the development of synthetic catalysts as part of the "Catalytic Improvement of Solvent Capture Systems" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Innovative Materials and Processes for Advanced Carbon Capture Technologies (IMPACCT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses a process for carbon capture through desublimation as part of the "Cryogenic Carbon Capture" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Innovative Materials and Processes for Advanced Carbon Capture Technologies (IMPACCT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses turning carbon dioxide exhaust into a solid as part of the "Chemical and Biological Catalytic Enhancement of Weathering of Silicate Minerals as Novel Carbon Capture and Storage" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Rare Earth Alternatives in Critical Technologies (REACT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses a high-current superconducting wire as part of the "High Performance, Low Cost Superconducting Wires and Coils for High Power Wind Generators" project.

Characteristic K-α x-rays used for single-pulse XRD are conventionally produced by a 37-stage high-voltage Marx pulse generator coupled to a vacuum needle-and-washer x-ray diode via coaxial transmission line. A large field-of-view x-ray image plate detection system typically enables observation of several Debye-Scherrer rings. Recently, we have developed a fiber-optic reducer, coupled to a CCD camera, to obtain low-noise, large field-of-view images. The direct beam spot is produced by bremsstrahlung radiation attenuated by a twomillimeter tungsten beam stop. Determination of the direct beam position is necessary to perform the ring integration.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the High Energy Advanced Thermal Storage (HEATS) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses an advanced metal-hydrides-based thermal battery as part of the "A New Generation of High Density Thermal Battery Based on Advanced Metal Hydrides" project.

The Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) operated a grain storage facility at Barnes, Kansas, in 1949-1974. Carbon tetrachloride contamination was initially detected in 1986 in the town's public water supply wells. In 2006-2007, the CCC/USDA conducted a comprehensive targeted investigation at and near its former property in Barnes to characterize this contamination. Those results were reported previously (Argonne 2008a). The results of that investigation indicated that carbon tetrachloride contamination is present in groundwater at low to moderate levels in the vicinity of the former CCC/USDA grain storage facility. Information obtained during the 2006-2007 investigation also indicated that at least one other potential source might have contributed to the groundwater contaminant plume (Argonne 2008a). The former agriculture building owned by the local school district, located immediately east of well PWS3, is also a potential source of the contamination. In November 2007, the CCC/USDA began periodic groundwater monitoring at Barnes. The monitoring is being conducted on behalf of the CCC/USDA by Argonne National Laboratory, under the direction of the Kansas Department of Health and Environment (KDHE). The objective is to monitor the carbon tetrachloride contamination identified in the groundwater at Barnes. Through 2010, sampling was conducted in …

We propose a unique, all-electron, thermodynamic density functional theory (DFT) code that directly predicts full or partial long-range order in crystalline (defected) solids and their effect on electronic properties via a first-principles mean-field theory, scales linear with number of atoms N per unit-cell [i.e. O(N), due to use of a mathematical-based screening in k-space], and addresses up to 1 million atoms using parallel architectures. Novel O(N) algorithms will be developed to permit this for an all-electron KKR Green's functional density-functional theory code.

A preliminary qualitative analysis of all addenda to ANSI/ASHRAE/IESNA Standard 90.1-2004 that were included in ANSI/ASHRAE/IESNA Standard 90.1-2007 was conducted. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from Standard 90.1-2004 were evaluated by DOE for their impact on energy efficiency. DOE preliminarily determined whether that addenda would have a positive, neutral, or negative impact on overall building efficiency.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Rare Earth Alternatives in Critical Technologies (REACT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses a new type of traction motor for electric vehicles as part of the "Rare Earth-Free Traction Motor for Electric Vehicle Applications" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Innovative Materials and Processes for Advanced Carbon Capture Technologies (IMPACCT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses the development of carbonic anhydrases enzymes as part of the "Low-Cost Biological Catalyst to Enable Efficient Carbon Dioxide Capture" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Rare Earth Alternatives in Critical Technologies (REACT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses a new type of electric motor as part of the "Advanced Electric Vehicle Motors with Low or No Rare Earth Content" project.

Hackensack University Medical Center's major initiative to create a cleaner healthier and safer environment for patients, employees and the community served by the medical center is built on its commitment to protect the environment and conserve precious energy resources. Since 2004 the Medical Center launched a long term campaign to temper the negative environmental impact of proposed and existing new construction at the medical center and to improve campus wide overall energy efficiency. The plan was to begin by implementing a number of innovative and eco-friendly enhancements to the Gabrellian Women's and Children's Pavilion, in construction at the time, which would lead to Certification by the US Green Building Councils Leadership & Environmental Design (LEED) program. In addition the medical center would evaluate the feasibility of implementing a photovoltaic system in the new construction (in development and planned) to provide clean pollution free electricity. The steps taken to achieve this included conducting a feasibility study complete with architectural and engineering assessments to determine the potential for implementation of a photovoltaic system on the campus and also to conduct an energy survey that would focus on determining specific opportunities and upgrades that would lead to a healthier energy efficient interior environment …

Efficiency in drilling is measured by Mechanical Specific Energy (MSE). MSE is the measure of the amount of energy input required to remove a unit volume of rock, expressed in units of energy input divided by volume removed. It can be expressed mathematically in terms of controllable parameters; Weight on Bit, Torque, Rate of Penetration, and RPM. It is well documented that minimizing MSE by optimizing controllable factors results in maximum Rate of Penetration. Current methods for computing MSE make it possible to minimize MSE in the field only through a trial-and-error process. This work makes it possible to compute the optimum drilling parameters that result in minimum MSE. The parameters that have been traditionally used to compute MSE are interdependent. Mathematical relationships between the parameters were established, and the conventional MSE equation was rewritten in terms of a single parameter, Weight on Bit, establishing a form that can be minimized mathematically. Once the optimum Weight on Bit was determined, the interdependent relationship that Weight on Bit has with Torque and Penetration per Revolution was used to determine optimum values for those parameters for a given drilling situation. The improved method was validated through laboratory experimentation and analysis of published …

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Innovative Materials and Processes for Advanced Carbon Capture Technologies (IMPACCT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses the development of a process to separate and store carbon dioxide as part of the"Electrochemically Mediated Separation for Carbon Capture and Mitigation" project.

The goal of the program is to develop 'LOW COST THIN FILM BUILDING-INTEGRATED PV SYSTEMS'. Major focus was on developing low cost solution for the commercial BIPV and rooftop PV market and meet DOE LCOE goal for the commercial market segment of 9-12 cents/kWh for 2010 and 6-8 cents/kWh for 2015. We achieved the 2010 goal and were on track to achieve the 2015 goal. The program consists of five major tasks: (1) modules; (2) inverters and BOS; (3) systems engineering and integration; (4) deployment; and (5) project management and TPP collaborative activities. We successfully crossed all stage gates and surpassed all milestones. We proudly achieved world record stable efficiencies in small area cells (12.56% for 1cm2) and large area encapsulated modules (11.3% for 800 cm2) using a triple-junction amorphous silicon/nanocrystalline silicon/nanocrystalline silicon structure, confirmed by the National Renewable Energy Laboratory. We collaborated with two inverter companies, Solectria and PV Powered, and significantly reduced inverter cost. We collaborated with three universities (Syracuse University, University of Oregon, and Colorado School of Mines) and National Renewable Energy Laboratory, and improved understanding on nanocrystalline material properties and light trapping techniques. We jointly published 50 technical papers in peer-reviewed journals and International Conference Proceedings. …

Advanced Research Projects Agency-Energy project sheet summarizing general information about the High Energy Advanced Thermal Storage (HEATS) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses modular high-energy, low-cost thermal storage as part of the "Thermal Batteries for Electric Vehicles" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Innovative Materials and Processes for Advanced Carbon Capture Technologies (IMPACCT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses the development of lower-energy carbon capture as part of the "CO2 Capture with Ionic Liquids Involving Phase Change" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Rare Earth Alternatives in Critical Technologies (REACT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses the development of composite materials made of iron and manganese as part of the "Rare-Earth-Free Permanent Magnets for Electric Vehicle Motors and Wind Turbine Generators: Hexagonal Symmetry Based Materials Systems Mn-Bi and M-type Hexaferrite" project.

The SPS at high intensities exhibits transverse single bunch instabilities with signatures consistent with an Ecloud driven instability. We present recent MD data from the SPS, details of the instrument technique and spectral analysis methods which help reveal complex vertical motion that develops within a subset of the injected bunch trains. The beam motion is detected via wideband exponential taper striplines and delta-sigma hybrids. The raw sum and difference data is sampled at 50 GHz with 1.8 GHz bandwidth. Sliding window FFT techniques and RMS motion techniques show the development of large vertical tune shifts on portions of the bunch of nearly 0.025 from the base tune of 0.185. Results are presented via spectrograms and bunch slice trajectories to illustrate development of the unstable beam and time scale of development along the injected bunch train. The study shows that the growing unstable motion occupies a very broad frequency band of 1.2 GHz. These measurements are compared to numerical simulation results, and the system parameter implications for an Ecloud feedback system are outlined.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Rare Earth Alternatives in Critical Technologies (REACT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses a new type of magnet for power generators and motors as part of the "Discovery & Design of Novel Permanent Magnets using Non-strategic Elements having Secure Supply Chains" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the 15 projects that are a part of the Innovative Materials and Processes for Advanced Carbon Capture Technologies (IMPACCT) program including project goals, innovation needs, and potential impacts.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the High Energy Advanced Thermal Storage (HEATS) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses the development of cost-effective thermal energy storage through the use of high-temperature phase-change materials as part of the "Development of a Low-Cost Thermal Energy Storage System Using Phase-Change Materials with Enhanced Radiation Heat Transfer" project.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Rare Earth Alternatives in Critical Technologies (REACT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses the development of specialized magnetic alloys as part of the "Nanocrystalline t-MnAI Permanent Magnets" project.