Influence of ordered L1₂ precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy (open access)

Influence of ordered L1₂ precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy

This article focuses on Al0.7CoCrFeNi, a lamellar dual-phase (fcc + B2) precipitation-strengthenable eutectic high entropy alloy. The back-stresses from the coherent L12 precipitate were insufficient to cause improvement in twin nucleation, owing to elevated twinning stress under quasi-static testing. However, under dynamic testing high density of twins were observed.
Date: April 23, 2019
Creator: Gwalani, Bharat; Gangireddy, Sindhura; Zheng, Yufeng; Soni, V.; Mishra, Rajiv & Banerjee, Rajarshi
System: The UNT Digital Library
Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys (open access)

Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys

Article discusses experimental results which reveal that the apparent activation-energy for grain-growth in an fcc-based AlxCoCrFeNi high entropy alloy (HEA) system increases from 179 to 486 kJ/mol when the Al content increases from x = 0.1 to 0.3.
Date: April 10, 2019
Creator: Gwalani, Bharat; Salloom, Riyadh; Alam, Talukder; Valentin, S.G.; Zhou, X.; Thompson, G. et al.
System: The UNT Digital Library
Fabric Defect Detection Using Activation Layer Embedded Convolutional Neural Network (open access)

Fabric Defect Detection Using Activation Layer Embedded Convolutional Neural Network

This article develops a deep-learning algorithm for an on-loom fabric defect inspection system by combining the techniques of image pre-processing, fabric motif determination, candidate defect map generation, and convolutional neural networks (CNNs).
Date: April 29, 2019
Creator: Ouyang, Wenbin; Xu, Bugao; Hou, Jue & Yuan, Xiaohui
System: The UNT Digital Library
Nanoindentation behavior of high entropy alloys with transformation-induced plasticity (open access)

Nanoindentation behavior of high entropy alloys with transformation-induced plasticity

Article describes an experiment where nanoindentation of three metastable dual-phase high entropy alloys (HEAs) was performed to obtain their inherent elastoplastic deformation responses.
Date: April 29, 2019
Creator: Sinha, S.; Mirshams, Reza; Wang, Tianhao; Nene, S. S.; Frank, M.; Liu, K et al.
System: The UNT Digital Library
Surface degradation mechanisms in a eutectic high entropy alloy at microstructural length-scales and correlation with phase-specific work function (open access)

Surface degradation mechanisms in a eutectic high entropy alloy at microstructural length-scales and correlation with phase-specific work function

Article evaluating wear and corrosion behavior for the AlCoCrFeNi2.1 eutectic high entropy alloy consisting of BCC (B2), and FCC (L12) lamellae.
Date: January 9, 2019
Creator: Hasannaeimi, Vahid; Ayyagari, Aditya; Muskeri, Saideep; Salloom, Riyadh & Mukherjee, Sundeep
System: The UNT Digital Library
Bayesian analysis of complex mutations in HBV, HCV, and HIV studies (open access)

Bayesian analysis of complex mutations in HBV, HCV, and HIV studies

This article provides a review of the Bayesian-inference-based methods applied to Hepatitis B Virus (HBV), Hepatitis C Virus (HCV), and Human Immunodeficiency Virus (HIV) studies with a focus on the detection of the viral mutations and various problems which are correlated to these mutations. The authors also provide a summary of the Bayesian methods' applications toward these viruses' studies, where several important and useful results have been discovered.
Date: April 4, 2019
Creator: Guo, Xuan; Liu, Bing; Feng, Shishi & Zhang, Jing
System: The UNT Digital Library
Physical and optical properties of the International Simple Glass (open access)

Physical and optical properties of the International Simple Glass

This article presents physical property data (both published and previously unpublished) on a single batch of International Simple Glass (ISG), which was cast into individual ingots that were distributed to the collaborators. Properties from the atomic scale to the macroscale, including composition and elemental impurities, phase purity, density, thermal properties, mechanical properties, optical and vibrational properties, and the results of molecular dynamics simulations are presented, as well as information on the surface composition and morphology after polishing. Although the existing literature on the alteration of ISG is not extensively reviewed here, the results of well-controlled static alteration experiments are presented here as a point of reference for other performance investigations.
Date: May 8, 2018
Creator: Kaspar, Tiffany C.; Ryan, Joseph V.; Pantano, Carlo G.; Rice, Jarrett; Trivelpiece, Cory; Hyatt, Neil C. et al.
System: The UNT Digital Library