The Accelerator Collider Department (CAD) at Brookhaven National Laboratory is operating the Relativistic Heavy Ion Collider (RHIC), which includes the dual-ring, 3.834 km circumference superconducting collider and the venerable AGS as the last part of the RHIC injection chain. CAD is planning on a luminosity upgrade of the machine under the designation RHIC II. One important component of the RHIC II upgrade is electron cooling of RHIC gold ion beams. For this purpose, BNL and the Budker Institute of Nuclear Physics in Novosibirsk entered into a collaboration aimed initially at the development of the electron cooling conceptual design, resolution of technical issues, and finally extend the collaboration towards the construction and commissioning of the cooler. Many of the results presented in this paper are derived from the Electron Cooling for RHIC Design Report [1], produced by the, BINP team within the framework of this collaboration. BNL is also collaborating with Fermi National Laboratory, Thomas Jefferson National Accelerator Facility and the University of Indiana on various aspects of electron cooling.

None

A letter report issued by the General Accounting Office with an abstract that begins "The U.S. Customs Service has requested $206.9 million for its Automated Commercial Environment (ACE)--a new import processing system. Customs' second expenditure plan provides for (1) meeting the Office of Management and Budget's capital planning and investment control review requirements; (2) complying with Customs' enterprise architecture; and (3) complying with federal acquisition rules, requirements, guidelines, and systems acquisition management practices. ACE will fundamentally change Customs' and many other organizations' business processes by introducing new system capabilities. ACE will be available around the clock to support important commercial and enforcement systems. Customs did not meet key commitments made in its first ACE expenditure plan because of underestimating funding requirements. Actual requirements were 90 percent higher than estimated. This history casts uncertainty on Customs' ability to reliably estimate costs and meet future commitments. GAO found that Customs lacks management controls in four areas: enterprise architecture, human capital, software acquisition management, and cost estimation. Because Customs has compressed its ACE acquisition plans from five to four years, the degree of overlap of program increments has increased. This may increase the risk that ACE capabilities will not be delivered on time …

Transmission electron microscopy (TEM), swelling measurements, isochronal annealing, and thermal diffusivity testing were used to characterize the effects of radiation damage in SiC. Together, these techniques provided a comprehensive set of tools for observing and characterizing the structure and evolution of radiation-induced defects in SiC as a function of irradiation temperature and dose. In this study, two types of dense, crystalline, monolithic SiC were subjected to irradiation doses up to 1 dpa-SiC at a temperature of 1100 C, as well as post-irradiation annealing up to 1500 C. The microscopic defect structures observed by TEM were correlated to changes in the macroscopic dimensions, thermal diffusivity and thermal conductivity. The results demonstrated the value of using ultrapure {beta}SiC as an effective reference material to characterize the nature of expected radiation damage in other, more complex, SiC-based materials such as SiC/SiC composites.

Dynamic Information Architecture System (DIAS) is a flexible, extensible, object-based framework for developing and maintaining complex multidisciplinary simulations of a wide variety of application contexts. The modeling domain of a specific DIAS-based simulation is determined by (1) software Entity (domain-specific) objects that represent the real-world entities that comprise the problem space (atmosphere, watershed, human), and (2) simulation models and other data processing applications that express the dynamic behaviors of the domain entities. In DIAS, models communicate only with Entity objects, never with each other. Each Entity object has a number of Parameter and Aspect (of behavior) objects associated with it. The Parameter objects contain the state properties of the Entity object. The Aspect objects represent the behaviors of the Entity object and how it interacts with other objects. DIAS extends the ''Object'' paradigm by abstraction of the object's dynamic behaviors, separating the ''WHAT'' from the ''HOW.'' DIAS object class definitions contain an abstract description of the various aspects of the object's behavior (the WHAT), but no implementation details (the HOW). Separate DIAS models/applications carry the implementation of object behaviors (the HOW). Any model deemed appropriate, including existing legacy-type models written in other languages, can drive entity object behavior. The DIAS …

In experiments like the spheromak, it becomes interesting to investigate the quality o f the magnetic flux surfaces in the device. One method of doing so is to impose an external perturbation. If the magnetic field without perturbation is tangled and no flux surfaces exist, then the perturbation will have little effect. However, if the field has well defined flux surfaces, the field should react strongly to a perturbation. Magnetic islands should form and potentially cause a degradation of the plasma This paper will assume the second case of good behavior and closed surfaces and will attempt to describe the effects of an external perturbation. Geometry-wise, we begin with the infinite cylinder approximation to a toroidally confined plasma. In the unperturbed state of this cylinder there are a toroidal field (axial field in the cylindrical geometry), a poloidal field and no radial field.

This report discuss issues that received congressional attention in the 107th Congress, such as The impact of air quality regulations, key water quality issues, superfund, solid/hazardous wastes, multibillion dollar cleanup and compliance programs, climate change, pesticides, EPA budget, and Science and Technology.

This report provides a short description of each account, organized by the appropriation bill structure, and spending amount requested for FY 2003 and enacted for FY 2002. It also illustrates the organizational structure of the executive branch as regards U.S foreign assistance programs and responsibilities.

The focus of this project was to explore for stratigraphic traps that may be present in valley-fill sandstone at the top of the Lower Cretaceous Kootenai Formation. This sandstone interval, generally known as the Greybull Sandstone, has been identified along the western edge of the reservation and is a known oil and gas reservoir in the surrounding region. The Greybull Sandstone was chosen as the focus of this research because it is an excellent, well-documented, productive reservoir in adjacent areas, such as Elk Basin; Mosser Dome field, a few miles northwest of the reservation; and several other oil and gas fields in the northern portion of the Bighorn Basin.

Three test instruments are being evaluated to determine the feasibility of using photo-acoustic technology for measuring unburned carbon in fly ash. The first test instrument is a single microwave frequency system previously constructed to measure photo-acoustic signals in an off-line configuration. This system was assembled and used to begin testing parameters thought to be influential in the resulting photo-acoustic signal output. A standard modulation frequency was chosen based upon signal to noise data gained from experimentation. Sample heterogeneity was tested and found not to be influential. Many other tests were performed during the second quarter. Preliminary results show that compression and photo-acoustic volume have an impact on photo-acoustic signal. Conclusions regarding the data for sample bulk density, temperature, humidity, moisture content, and linearity are pending further review. Conclusions for ambient temperature and humidity are pending further review as well. Simultaneously, a second instrument is to be constructed based in part on lessons learned with the first instrument, and to expand the capabilities of the first instrument. Improvements include a control loop to allow more constant microwave power output and an ability to operate over a range of microwave frequencies. To date, the design of the second instrument has been completed …

Residual stress in YBCO films on Ag and Hastelloy C substrates was determined by using 3-D optical interferometry and laser scanning to measure the change in curvature radius before and after film deposition. The residual stress was obtained by appropriate analysis of curvature measurements. Consistent with residual thermal stress calculations based on the thermal expansion coefficient mismatch between the substrates and YBCO film, the measured residual stress in the YBCO film on Hastelloy C substrate was tensile, while it was compressive on the Ag substrate. The stress values measured by the two techniques were generally in good agreement, suggesting that optical interferometry and laser scanning have promise for measuring residual stresses in thin films.

Resonant x-ray scattering is a powerful experimental technique for probing orbital and charge ordering. It involves tuning the incident photon energy to an absorption edge of the relevant ion and observing scattering at previously ''forbidden'' Bragg peaks, and it allows high-resolution, quantitative studies of orbital and charge order--even from small samples. Further, resonant x-ray scattering from orbitally ordered systems exhibits polarization- and azimuthal-dependent properties that provide additional information about the details of the orbital order that is difficult, or impossible, to obtain with any other technique. In the manganites, the sensitivity to charge and orbital ordering is enhanced when the incident photon energy is tuned near the Mn K absorption edge (6.539 keV), which is the lowest energy at which a 1s electron can be excited into an unoccupied state. In this process, the core electron is promoted to an intermediate excited state, which decays with the emission of a photon. The sensitivity to charge ordering is believed to be due to the small difference in K absorption edges of the Mn{sup 3+} and Mn{sup 4+} sites. For orbital ordering, the sensitivity arises from a splitting--or difference in the weight of the density of states [239]--of the orbitals occupied by …

None

A source release model was developed to determine the release of contaminants into the shallow subsurface, as part of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) evaluation at the Idaho National Engineering and Environmental Laboratory's (INEEL) Subsurface Disposal Area (SDA). The output of the source release model is used as input to the subsurface transport and biotic uptake models. The model allowed separating the waste into areas that match the actual disposal units. This allows quantitative evaluation of the relative contribution to the total risk and allows evaluation of selective remediation of the disposal units within the SDA.

Testimony issued by the General Accounting Office with an abstract that begins "The U.S. Postal Service continues to face financial and transformation challenges. Since GAO placed the Service's long-term outlook and transformation efforts on its high-risk list, the Service's financial situation has continued to decline, and its operational challenges have increased. The Service took a good first step when it issued its Transformation Plan. The plan provides information about the Service's challenges, identifies many actions the Service plans to take under its existing authority, and outlines steps that would require congressional action. The plan does not, however, adequately address some key issues or include an action plan with key milestones. The catastrophic events of September 11 and subsequent anthrax scares, coupled with the recent economic slowdown, have decreased mail volumes and revenues. However, the Service's financial difficulties are not just a cyclical phenomenon that will fade as the economy recovers. The Service's basic business model, which assumes that rising mail volume will cover rising costs and mitigate rate increases, is questionable as mail volumes stagnate or deteriorate in an increasingly competitive environment. The Service's Transformation Plan recognizes that postal costs are rising faster than revenues and identifies many actions that …

The purpose of this paper is to describe a systematic approach to assess and prioritize technology concepts and systems for future research and development (R and D) funding. This paper discusses the analysis and rationale used in developing an evaluation process to assist those engaged in prioritizing technologies. This paper will explain the developed evaluation process, discuss the methodology, and summarize the rationale underlying the process.

Concurrent resolution introduced by the Texas House of Representatives and Senate relating to designating September 2003 as Leukemia and Lymphoma Awareness Month in Texas.

Ophir Corporation was awarded a contract by the U. S. Department of Energy, National Energy Technology Laboratory under the Project Title ''Airborne, Optical Remote Sensing of Methane and Ethane for Natural Gas Pipeline Leak Detection'' on October 14, 2002. This six-month technical report summarizes the progress for each of the proposed tasks, discusses project concerns, and outlines near-term goals. Ophir has completed a data survey of two major natural gas pipeline companies on the design requirements for an airborne, optical remote sensor. The results of this survey are disclosed in this report. A substantial amount of time was spent on modeling the expected optical signal at the receiver at different absorption wavelengths, and determining the impact of noise sources such as solar background, signal shot noise, and electronic noise on methane and ethane gas detection. Based upon the signal to noise modeling and industry input, Ophir finalized the design requirements for the airborne sensor, and released the critical sensor light source design requirements to qualified vendors. Responses from the vendors indicated that the light source was not commercially available, and will require a research and development effort to produce. Three vendors have responded positively with proposed design solutions. Ophir has …

Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2002 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report.

Alloy 22 (UNS N60622) is a nickel-based alloy, which is extensively used in aggressive industrial applications, especially due to its resistance to localized corrosion and stress corrosion cracking in high chloride environments. The purpose of this work was to characterize the anodic behavior of Alloy 22 in concentrated calcium chloride (CaCl{sub 2}) brines and to evaluate the inhibitive effect of nitrate, especially to localized corrosion. Standard electrochemical tests such as polarization resistance and cyclic polarization were used. Results show that the corrosion potential of Alloy 22 was approximately -360 mV in the silver-silver chloride (SSC) scale and independent of the tested temperature. Cyclic polarization tests showed that Alloy 22 was mainly susceptible to localized attack in 5 M CaCl{sub 2} at 75 C and higher temperatures. The addition of nitrate in a molar ratio of chloride to nitrate equal to 10 increased the onset of localized corrosion to approximately 105 C. The addition of nitrate to the solution also decreased the uniform corrosion rate and the passive current of the alloy.

The Department of Energy selected caustic side solvent extraction (CSSX) as the preferred cesium removal technology for Savannah River Site waste. As a pretreatment step for the CSSX flowsheet, personnel contact the incoming salt solution that contains entrained sludge with monosodium titanate (MST) to adsorb strontium and select actinides. They filter the resulting slurry to remove the sludge and MST. The conclusions from this work is detailed in this report.

We are testing a high-current-density high-brightness Argon-Ion Source for Heavy Ion Fusion applications. The 100-kV 20-{micro}s source has produced up to 5 mA of Ar{sup +} in a single beamlet. The extraction current density is 100 mA/cm2. We have measured the emittance of the beamlet, and the fraction of Ar{sup ++} ions under several operating conditions. We present measurements of the extracted current density as a function of RF power and gas pressure ({approx} 2 mT), current density uniformity, and energy dispersion (due to charge exchange). We are testing a 80-kV 61-hole multi-beamlet array that will produce a total current > 200 mA. In the current experiments the beamlets are not merged into a single beam. A 500-kV experiment where the beamlets will be merged to a produce 0.5-A beam is being planned.

CH2M HILL Hanford Group, Inc. is identifying and developing supplemental process technologies to accelerate the Hanford tank waste cleanup mission. Bulk vitrification, containerized grout, and steam reforming are three technologies under consideration for treatment of the radioactive saltcake wastes in 68 single-shell tanks. To support development and testing of these technologies, Pacific Northwest National Laboratory (PNNL) was tasked with developing a cold dissolved saltcake simulant formulation to be representative of an actual saltcake waste stream, preparing 25- and 100-L batches of the simulant, and analyzing the composition of the batches to ensure conformance to formulation targets. Lacking a defined composition for dissolved actual saltcake waste, PNNL used available tank waste composition information and an equilibrium chemistry model (Environmental Simulation Program [ESP{trademark}]) to predict the concentrations of analytes in solution. Observations of insoluble solids in initial laboratory preparations for the model-predicted formulation prompted reductions in the concentration of phosphate and silicon in the final simulant formulation. The analytical results for the 25- and 100-L simulant batches, prepared by an outside vendor to PNNL specifications, agree within the expected measurement accuracy ({approx}10%) of the target concentrations and are highly consistent for replicate measurements, with a few minor exceptions. In parallel with the …

Testimony issued by the General Accounting Office with an abstract that begins "This testimony discusses the results of security tests we performed in which agents of the Office of Special Investigations (OSI), acting in an undercover capacity, entered the United States from various countries in the Western Hemisphere using counterfeit documentation and fictitious identities. This work was initially undertaken at the request of the Senate Finance Committee and was continued at the request of the Subcommittee on Immigration, Border Security, and Claims, House Committee on the Judiciary. The purpose of our tests was to determine whether U.S. government officials conducting inspections at ports of entry would detect the counterfeit identification documents."