The purpose of this paper is to report on processing of raw waveform data from 4547 events recorded at 12 stations between 2001 and 2005 by the Salton Sea Geothermal Field (SSGF) seismic network. We identified a central region of the network where vertically elongated distributions of hypocenters have previously been located from regional network analysis. We process the data from the local network by first autopicking first P and S arrivals; second, improving these with hand picks when necessary; then, using cross-correlation to provide very precise P and S relative arrival times. We used the HypoDD earthquake location algorithm to locate the events. We found that the originally elongated distributions of hypocenters became more tightly clustered and extend down the extent of the study volume at 10 Km. However, we found the shapes to depend on choices of location parameters. We speculate that these narrow elongated zones of seismicity may be due to stress release caused by fluid flow.

Models of late-time neutrino mass generation contain new interactions of the cosmic background neutrinos with supernova relic neutrinos (SRNs). Exchange of an on-shell light scalar may lead to significant modification of the differential SRN flux observed at earth. We consider an Abelian U(1) model for generating neutrino masses at low scales, and show that there are cases for which the changes induced in the flux allow one to distinguish the Majorana or Dirac nature of neutrinos, as well as the type of neutrino mass hierarchy (normal or inverted or quasi-degenerate). In some region of parameter space the determination of the absolute values of the neutrino masses is also conceivable. Measurements of the presence of these effects may be possible at the next-generation water Cerenkov detectors enriched with Gadolinium, or a 100 kton liquid argon detector.

The 100-F-46 french drain consisted of a 1.5 to 3 m long, vertically buried, gravel-filled pipe that was approximately 1 m in diameter. Also included in this waste site was a 5 cm cast-iron pipeline that drained condensate from the 119-F Stack Sampling Building into the 100-F-46 french drain. In accordance with this evaluation, the confirmatory sampling results support a reclassification of this site to No Action. The current site conditions achieve the remedial action objectives and the corresponding remedial action goals established in the Remaining Sites ROD. The results of confirmatory sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.

None

Sulfur-oxidizing epsilonproteobacteria are common in a variety of sulfidogenic environments. These autotrophic and mixotrophic sulfur-oxidizing bacteria are believed to contribute substantially to the oxidative portion of the global sulfur cycle. In order to better understand the ecology and roles of sulfur-oxidizing epsilonproteobacteria, in particular those of the widespread genus Sulfurimonas, in biogeochemical cycles, the genome of Sulfurimonas denitrificans DSM1251 was sequenced. This genome has many features, including a larger size (2.2 Mbp), that suggest a greater degree of metabolic versatility or responsiveness to the environment than seen for most of the other sequenced epsilonproteobacteria. A branched electron transport chain is apparent, with genes encoding complexes for the oxidation of hydrogen, reduced sulfur compounds, and formate and the reduction of nitrate and oxygen. Genes are present for a complete, autotrophic reductive citric acid cycle. Many genes are present that could facilitate growth in the spatially and temporally heterogeneous sediment habitat from where Sulfurimonas denitrificans was originally isolated. Many resistance-nodulation-development family transporter genes (10 total) are present; of these, several are predicted to encode heavy metal efflux transporters. An elaborate arsenal of sensory and regulatory protein-encoding genes is in place, as are genes necessary to prevent and respond to oxidative stress.

A grain boundary engineered copper sample previously characterized by Electron Backscatter Diffraction (EBSD) has been selected for nanoindentation tests. Given the fact that grain boundaries have thicknesses in the order of 1 micron or less, it is essential to use nanomechanics to test the properties of individual grain boundaries. The Hysitron nanoindenter was selected over the MTS nanoindenter due to its superior optical capabilities that aid the selection and identification of the areas to be tested. An area of 2mm by 2mm with an average grain size of 50 microns has been selected for the study. Given the EBSD mapping, grains and grain boundaries with similar orientations are tested and the hardness and modulus are compared. These results will give a relationship between the mechanical properties and the engineered grain boundaries. This will provide for the first time a correlation between grain boundary orientation and the mechanical behavior of the sample at the nanoscale.

We present an algorithm specification for computing adaptivemesh refinement solutions for compressible self-gravitatingflows.

The superconducting coupling solenoid to be applied in the Muon Ionization Cooling Experiment (MICE) is made from copper matrix Nb-Ti conductors with inner radius of 750 mm, length of 285 mm and thickness of 102.5 mm at room temperature. The magnetic field up to 2.6 T at the magnet centerline is to keep the muons within the MICE RF cavities. Its self inductance is around 592 H and its magnet stored energy is about 13 MJ at a full current of 210 A for the worst operation case of the MICE channel. The stress induced inside the coil during cool down and charging is relatively high. Two test coils are to build and test in order to validate the design method and develop the fabrication technique required for the coupling coil winding, one is 350 mm inner diameter and full length same as the coupling coil, and the other is one-quarter length and 1.5 m diameter. The 1.5 m diameter coil will be charged to strain conditions that are greater than would be encountered in the coupling coil. This paper presents detailed design of the test coils as well as developed winding skills. The analyses on stress in coil assemblies, …

Precise determination of the specimen position relative to the sampling volume for texture and stress measurements by neutron diffraction is difficult or sometimes impossible using only optical devices due to large or irregular sample dimensions and/or complicated shape of the sampling volume. The knowledge of the shape and size of the sampling volume allows development of a general mathematical model for the intensity variation with a parallelogram-shape sampling volume moving from outside to inside the specimen for both transmission and reflection geometric set-ups. Both fixed slits and radial collimators are options in defining the geometrical setup. The attenuation by the sample also has been taken into account in this model. Experimental results agree well with the model calculations. The program SURFING is based on the model calculation and was written in Labwindows/CVI{copyright}.

Nanoscale materials provide unique properties that will enable new technologies and enhance older ones. One area of intense activity in which nanoscale materials are being used is in the development of new functional materials for battery applications.1-4 This effort promises superior materials with properties that circumvent many of the problems associated with traditional battery materials. Previously we have worked on several approaches for using nanoscale materials for application as cathode materials in rechargeable Li batteries.5-11 Our recent work has focused on synthesizing MnO2 nanoparticles and using conducting polymers to electronically address these particles in nanoparticle assemblies. This presentation will focus on those efforts. MnO2 nanoparticles that are encapsulated with poly(3,4-ethylenedioxythiophene) (PEDOT) are prepared using 3,4-ethylenedioxythiophene (EDOT) as a chemical reductant for permanganate anion. This non-aqueous preparation is based on a recent report of a similar method for preparation of PEDOT-encapsulated Au nanoparticles.12 We also describe the synthesis of MnO2 colloidal nanoparticles prepared using an aqueous route involving reduction of permanganate anion with butanol using a previously described route.13 We report the synthesis and characterization of the PEDOT material, and the aqueous colloidal material. We show that the aqueous colloidal nanoparticles can be trapped in thin films using a layer-by-layer deposition …

We present simple string models which dynamically break supersymmetry without non-Abelian gauge dynamics. The Fayet model, the Polonyi model, and the O'Raifeartaigh model each arise from D-branes at a specific type of singularity. D-brane instanton effects generate the requisite exponentially small scale of supersymmetry breaking.

Executive Summary Despite advances in technology, power system operators must assimilate overwhelming amounts of data to keep the grid operating. Analyses of recent blackouts have clearly demonstrated the need to enhance the operator’s situation awareness (SA). The long-term objective of this research is to integrate valuable technologies into the grid operator environment that support decision making under normal and abnormal operating conditions and remove non-technical barriers to enable the optimum use of these technologies by individuals working alone and as a team. More specifically, the research aims to identify methods and principles to increase SA of grid operators in the context of system conditions that are representative or common across many operating entities and develop operationally relevant experimental methods for studying technologies and operational practices which contribute to SA. With increasing complexity and interconnectivity of the grid, the scope and complexity of situation awareness have grown. New paradigms are needed to guide research and tool development aimed to enhance and improve operations. In reviewing related research, operating practices, systems, and tools, the present study established a taxonomy that provides a perspective on research and development surrounding power grid situation awareness and clarifies the field of human factors/SA for grid operations. …

We present analytic solutions to two test problems that can be used to check the hydrodynamic implementation in computer codes designed to calculate the propagation of shocks in spherically convergent geometry. Our analysis is restricted to fluid materials with constant bulk modulus. In the first problem we present the exact initial acceleration and pressure gradient at the outer surface of a sphere subjected to an exponentially decaying pressure of the form P(t) = P{sub 0}e{sup -at}. We show that finely-zoned hydro-code simulations are in good agreement with our analytic solution. In the second problem we discuss the implosions of incompressible spherical fluid shells and we present the radial pressure profile across the shell thickness. We also discuss a semi-analytic solution to the time-evolution of a nearly spherical shell with arbitrary but small initial 3-dimensional (3-D) perturbations on its inner and outer surfaces.

In 2003, Bronx Community College received a grant of $481,000 through the United States Department of Energy for the purpose of conducting research- related activities leading to the creation of the Center for Sustainable Energy at Bronx Community College. The award, which was administered on behalf of Bronx Community College by the Research Foundation of the City University of New York, was initially for one year, from October 2003 through September 30, 2004. It received a no-cost extension to June 30, 2005. This report presents a summary of the activities and accomplishments attributable to the award.

The visualization of biological molecules and assemblies can provide enormous insight into protein structure-function relationships, as well as practical applications to fields such as microbial forensics. Atomic force microscopy (AFM) is a powerful tool for imaging soft biomaterials such as cells, spores, and proteins with nanometer resolution. The goal of this work is to understand pathogen architecture and its application to microbial forensics and medicine. Initial work has focused on imaging Bacillus species; both live cells and dormant spores. Experiments have shown AFM capable of visualizing the fine structures of cell wall peptidoglycan and spore coat proteins. Work completed thus far indicates that AFM will be able to resolve some persistent questions in microbiology concerning structure-function relationships at cell surfaces, as well as assist in understanding the formulation and processing of spores used for bio-terrorism. In addition to imaging results, we have developed a robust method for the attachment of cells to surfaces for imaging in liquid.

The study of dislocation nucleation in closed-packed metals by nanoindentation has recently attracted much interest. Here, we address the peculiarities of the incipient plasticity in body centered cubic (bcc) metals using low index Ta single-crystals as a model system. The combination of nanoindentation with high-resolution atomic force microscopy provides us with experimental atomic-scale information on the process of dislocation nucleation and multiplication. Our results reveal a unique deformation behavior of bcc Ta at the onset of plasticity which is distinctly different from that of closed-packed metals. Most noticeable, we observe only one rather than a sequence of discontinuities in the load-displacement curves. This and other differences are discussed in context of the characteristic plastic deformation behavior of bcc metals.

A future high-energy electron-ion collider would explore the non-linear weakly-coupled regime of QCD, and test the Color Glass Condensate (CGC) approach to high-energy scattering. Hard diffraction in deep inelastic scattering off nuclei will provide many fundamental measurements. In this work, the nuclear diffractive structure function F{sub 2,A}{sup D} is predicted in the CGC framework, and the features of nuclear enhancement and suppression are discussed.

In 1952, we began laboratory operations in the barracks building of the Naval Air Station with approximately 50 employees. Today, the Chemistry and Materials Science (CMS) Directorate is a major organization at the Lawrence Livermore National Laboratory with more than 500 employees who continue to contribute to our evolving national security mission. For more than half a century, the mission of the Laboratory revolved primarily around nuclear deterrence and associated defense technologies. Today, Livermore supports a broad-based national security mission, and our specialized capabilities increasingly support emerging missions in human health and energy security. In the future, CMS will play a significantly expanded role in science and technology at the intersection of national security, energy and environment, and health. Our world-class workforce will provide the science and technology base for radically innovative materials to our programs and sponsors. Our 2005 Annual Report describes how our successes and breakthroughs follow a path set forward by our strategic plan and four organizing research themes, each with key scientific accomplishments by our staff and collaborators. Organized into two major sections-research themes and dynamic teams, this report focuses on achievements arising from earlier investments that address future challenges. The research presented in this annual …

Reactive fluid flow and geochemical transport in unsaturated fractured rocks has received increasing attention for studies of contaminant transport, groundwater quality, waste disposal, acid mine drainage remediation, mineral deposits, sedimentary diagenesis, and fluid-rock interactions in hydrothermal systems. This paper presents methods for modeling geochemical systems that emphasize: (1) involvement of the gas phase in addition to liquid and solid phases in fluid flow, mass transport and chemical reactions, (2) treatment of physically and chemically heterogeneous and fractured rocks, (3) the effect of heat on fluid flow and reaction properties and processes, and (4) the kinetics of fluid-rock interaction. The physical and chemical process model is embodied in a system of partial differential equations for flow and transport, coupled to algebraic equations and ordinary differential equations for chemical interactions. For numerical solution, the continuum equations are discretized in space and time. Space discretization is based on a flexible integral finite difference approach that can use irregular gridding to model geologic structure; time is discretized fully implicitly as a first-order finite difference. Heterogeneous and fractured media are treated with a general multiple interacting continua method that includes double-porosity, dual-permeability, and multi-region models as special cases. A sequential iteration approach is used to …

We have performed a complete moment tensor analysis of the seismic event, which occurred on Monday August 6, 2007 at 08:48:40 UTC 21 km from Mt.Pleasant, Utah. In our analysis we utilized complete three-component seismic records recorded by the USArray, University of Utah, and EarthScope seismic arrays. The seismic waveform data was integrated to displacement and filtered between 0.02 to 0.10 Hz following instrument removal. We used the Song et al. (1996) velocity model to compute Green's functions used in the moment tensor inversion. A map of the stations we used and the location of the event is shown in Figure 1. In our moment tensor analysis we assumed a shallow source depth of 1 km consistent with the shallow depth reported for this event. As shown in Figure 2 the results point to a source mechanism with negligible double-couple radiation and is composed of dominant CLVD and implosive isotropic components. The total scalar seismic moment is 2.12e22 dyne cm corresponding to a moment magnitude (Mw) of 4.2. The long-period records are very well matched by the model (Figure 2) with a variance reduction of 73.4%. An all dilational (down) first motion radiation pattern is predicted by the moment tensor …

Phylogenetic relationships among species of the salamanderfamily Salamandridae are investigated using nearly 3000 nucleotide basesof newly reported mitochondrial DNA sequence data from the mtDNA genicregion spanning the genes tRNALeu-COI. This study uses nearlycomprehensive species-level sampling to provide the first completephylogeny for the Salamandridae. Deep phylogenetic relationships amongthe three most divergent lineages in the family Salamandrina terdigitata,a clade comprising the "True" salamanders, and a clade comprising allnewts except S. terdigitata are difficult to resolve. However, mostrelationships within the latter two lineages are resolved with robustlevels of branch support. The genera Euproctus and Triturus arestatistically shown to be nonmonophyletic, instead each contains adiverse set of lineages positioned within the large newt clade. The genusParamesotriton is also resolve as a nonmonophyletic group, with the newlydescribed species P. laoensis constituting a divergent lineage placed ina sister position to clade containing all Pachytriton species and allremaining Paramesotriton species. Sequence divergences between P.laoensis and other Paramesotriton species are as great as those comparingP. laoensis and species of the genera Cynops and Pachytriton. Analyses oflineage diversification across the Salamandridae indicate that, despiteits exceptional diversity, lineage accumulation appears to have beenconstant across time, indicating that it does not represent a truespecies radiation.

The objective of this project is to design, develop and demonstrate methods for the chemical stimulation of candidate EGS reservoirs as well as the chemical treatment of mineral-scaled wellbores. First, a set of candidate chemical compounds capable of dissolving calcite was identified. A series of tests was then performed on each candidate in order to screen it for thermal stability and reactivity towards calcite. A detailed analysis was then performed on each compound that emerged from the screening tests in order to characterize its decay kinetics and reaction kinetics as functions of temperature and chemical composition. From among the compounds emerging from the laboratory studies, one compounds was chosen for a field experiment in order to verify the laboratory predictions.

From the history of the Commission, it began with a large number of members. It was found that it was difficult to gain agreement by correspondence between such a large group. A smaller group was elected to operate by correspondence and make decisions. It operated successfully for a half century in this manner. With funding available, the Commission membership grew larger but they.discussed all matters face to face at Commission meetings. Subcommittees were appointed to pursue specialized topics and members reported and discussed their subcommittee results directly to the Commission at the face to face meetings. With the change in the bylaws, future face to face meetings will no longer be an option for the members of the Commission and its subcommittees, unless all members provide their own funds or those of their host institutions. The funding and membership restrictions are all serious topics, which require a thorough discussion.

The objective of this report is to discuss the degree of sorption and desorption of {sup 137}Cs and {sup 60}Co that may be associated with the granite bedrock and the ''popcorn'' cement drain system that underlie the Maine Yankee Containment Foundation. The purpose is to estimate how much retardation of these two radionuclides takes place in groundwater that flows in the near-field of the Containment Foundation, specifically with respect to contamination originating at the PAB Test Pit. Specific concerns revolve around the potential for the contamination originating near the PAB to create a radioactive dose to a hypothetical ''resident farmer'' using a well intercepting this water to exceed 4 millirems/yr.