Compensation and trapping in CdZnTe radiation detectors studied by thermoelectric emission spectroscopy, thermally stimulated conductivity, and current-voltage measurements (open access)

Compensation and trapping in CdZnTe radiation detectors studied by thermoelectric emission spectroscopy, thermally stimulated conductivity, and current-voltage measurements

In today's commercially available counter-select-grade CdZnTe crystals for radiation detector applications, the thermal ionization energies of the traps and their types, whether electron or hole traps, were measured. The measurements were successfully done using thermoelectric emission spectroscopy (TEES) and thermally stimulated conductivity (TSC). For reliability, the electrical contacts to the sample were found to be very important and, instead of Au Schottky contacts, In Ohmic contacts had to be used. For the filling of the traps, photoexcitation was done at zero bias, at 20K and at wavelengths which gave the maximum bulk photoexcitation for the sample. Between the temperature range from 20 to 400 K, the TSC current was found to be on the order of {approximately} 10,000 times or even larger than the TEES current, in agreement with theory, but only TEES could resolve the trap type and was sensitive to the deep traps. Large concentration of hole traps at 0.1 and 0.6 eV were observed and smaller contraction of electron traps at 0.4 eV was seen. These deep traps cause compensation in the material and also cause trapping that degrades the radiation detection measurement.
Date: January 7, 2000
Creator: James, Ralph B.
Object Type: Article
System: The UNT Digital Library
Dynamics of Supersymmetric SU(n_c) and USp(2n_c) Gauge Theories (open access)

Dynamics of Supersymmetric SU(n_c) and USp(2n_c) Gauge Theories

We study dynamical flavor symmetry breaking in the context of a class of N=1 supersymmetric SU(n_c) and USp(2 n_c) gauge theories, constructed from the exactly solvable N=2 theories by perturbing them with small adjoint and generic bare hypermultiplet (quark) masses. We find that the flavor U(n_f) symmetry in SU(n_c) theories is dynamically broken to $U(r)\times U(n_f-r)$ groups for $n_f \leq n_c$. In the r=1 case the dynamical symmetry breaking is caused by the condensation of monopoles in the $\underlinen_f$ representation. For general r, however, the monopoles in the $\underline_n_fC_r$ representation, whose condensation could explain the flavor symmetry breaking but would produce too-many Nambu--Goldstone multiplets, actually"break up'' into"magnetic quarks'' which condense and induce confinement and the symmetry breaking. In USp(2n_c) theories with $n_f\leq n_c + 1$, the flavor SO(2n_f) symmetry is dynamically broken to U(n_f), but with no description in terms of a weakly coupled local field theory. In both SU(n_c) and USp(2 n_c) theories, with larger numbers of quark flavors, besides the vacua with these properties, there exist also vacua with no flavor symmetry breaking.
Date: January 7, 2000
Creator: Carlino, Giuseppe; Konishi, Kenichi & Murayama, Hitoshi
Object Type: Article
System: The UNT Digital Library
Effect of electron transport properties on unipolar CdZnTe radiation detectors: LUND, SpectrumPlus, and Coplanar Grid (open access)

Effect of electron transport properties on unipolar CdZnTe radiation detectors: LUND, SpectrumPlus, and Coplanar Grid

Device simulations of (1) the laterally-contacted-unipolar-nuclear detector (LUND), (2) the SpectrumPlus, (3) and the coplanar grid made of Cd{sub 0.9}Zn{sub 0.1}Te (CZT) were performed for {sup 137}Cs irradiation by 662.15 keV gamma-rays. Realistic and controlled simulations of the gamma-ray interactions with the CZT material were done using the MCNP4B2 Monte Carlo program, and the detector responses were simulated using the Sandia three-dimensional multielectrode simulation program (SandTMSP). The simulations were done for the best and the worst expected carrier nobilities and lifetimes of currently commercially available CZT materials for radiation detector applications. For the simulated unipolar devices, the active device volumes were relatively large and the energy resolutions were fairly good, but these performance characteristics were found to be very sensitive to the materials properties. The internal electric fields, the weighting potentials, and the charge induced efficiency maps were calculated to give insights into the operation of these devices.
Date: January 7, 2000
Creator: James, Ralph B.
Object Type: Article
System: The UNT Digital Library
Energy consumption and expenditure projections by population group on the basis of the annual energy outlook 1999 forecast (open access)

Energy consumption and expenditure projections by population group on the basis of the annual energy outlook 1999 forecast

This report presents an analysis of the relative impact of the base-case scenario used in Annual Energy Outlook 1999 on different population groups. Projections of energy consumption and expenditures, as well as energy expenditure as a share of income, from 1996 to 2020 are given. The projected consumption of electricty, natural gas, distillate fuel, and liquefied petroleum gas during this period is also reported for each population group. In addition, this report compares the findings of the Annual Energy Outlook 1999 report with the 1998 report. Changes in certain indicators and information affect energy use forecasts, and these effects are analyzed and discussed.
Date: January 7, 2000
Creator: Poyer, D.A. & Balsley, J.H.
Object Type: Report
System: The UNT Digital Library
Hanford Seismic Annual Report and Fourth Quarter Report for Fiscal Year 1999 (open access)

Hanford Seismic Annual Report and Fourth Quarter Report for Fiscal Year 1999

This report provides the seismic record at Hanford for FY 1998. Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the U.S. Department of Energy and its contractors. Hanford Seismic Monitoring also locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The HSN and the Eastern Washington Regional Network (EWRN) consist of 40 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. A major reconfiguration of the HSN was initiated at the end of this quarter and the results will be reported in the first quarter report for next fiscal year (FY 2000). For the HSN, there were 390 triggers during the fourth quarter of fiscal year (FY) 1999 on the primary recording system. With the implementation …
Date: January 7, 2000
Creator: Hartshorn, Donald C.; Reidel, Steve P. & Rohay, Alan C.
Object Type: Report
System: The UNT Digital Library
LLE Review, Quarterly Report: Volume 80, July-September 1999 (open access)

LLE Review, Quarterly Report: Volume 80, July-September 1999

This volume of the LLE Review, covering the period July-September 1999, features a theoretical analysis of a process that generates mass perturbations of an imploding target driven by modulated laser illumination. The process, referred to as laser imprint, impacts the integrity of the shell during direct-drive implosions, potentially quenching target performance. In this article V. N. Goncharov, J. A. Delettrez, S. Skupsky, and R. P. J. Town present a model of the generation of mass perturbations and analyze the mass perturbation growth due to nonuniform ablation pressure. Stabilizing mechanisms of thermal conduction smoothing and mass ablation are shown to suppress the acceleration perturbation, and mass ablation is also shown to impact velocity perturbations. The model predicts that a direct-drive cryogenic NIF target will remain intact during the implosion when l-Thz SSD beam smoothing is used.
Date: January 7, 2000
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Longevity of Emplacement Drift Ground Support Materials (open access)

Longevity of Emplacement Drift Ground Support Materials

The purpose of this analysis is to evaluate the factors affecting the longevity of emplacement drift ground support materials and to develop a basis for selection of materials for ground support that will function throughout the preclosure period. The Development Plan (DP) for this analysis is given in CRWMS M&O (Civilian Radioactive Waste Management System Management and Operating Contractor) (1999a). The candidate materials for ground support are steel (carbon steel, ductile cast iron, galvanized steel, and stainless steel, etc.) and cement. Steel will mainly be used for steel sets, lagging, channels, rock bolts, and wire mesh. Cement usage is only considered in the case of grouted rock bolts. The candidate materials for the invert structure are steel and crushed rock ballast. The materials shall be evaluated for the repository emplacement drift environment under a specific thermal loading condition based on the proposed License Application Design Selection (LADS) design. The analysis consists of the following tasks: (1) Identify factors affecting the longevity of ground control materials for use in emplacement drifts. (2) Review existing documents concerning behavior of candidate ground control materials during the preclosure period. The major criteria to be considered for steel are mechanical and thermal properties, and durability, …
Date: January 7, 2000
Creator: Tang, D.
Object Type: Report
System: The UNT Digital Library
Optical properties of Cd{sub 0.9}Zn{sub 0.1}Te studied by variable angle spectroscopic ellipsometry between 0.75 and 6.24 eV (open access)

Optical properties of Cd{sub 0.9}Zn{sub 0.1}Te studied by variable angle spectroscopic ellipsometry between 0.75 and 6.24 eV

Optical properties of Cd{sub 0.9}Zn{sub 0.1}Te (CZT) were studied by variable angle spectroscopic ellipsometry (VASE). Measurements made by VASE were performed on CZT and CdTe samples in air at room temperature at multiple angles of incidence. A parametric function model was employed in the VASE analysis to determine the dielectric functions {var_epsilon}={var_epsilon}{sub 1} + i{var_epsilon}{sub 2} in the range of 0.75 to 6.24 eV. A two-oscillator analytical model was used to describe the dielectric response of native oxides on CZT. Surface oxide optical properties and thickness on CZT were also determined in conjunction with the VASE measurement and analysis of a CdTe sample. Two samples of CZT of different oxide thicknesses were measured and their optical constants were coupled together in a multiple-sample, multiple-model VASE analysis to resolve correlations between fitting parameters. Effective medium approximation (EMA) was used to describe the optical properties of the CZT oxide with roughness. A Kramers-Kronig self-consistency check of the real and imaginary parts of the Cd{sub 0.9}Zn{sub 0.1} dielectric functions was performed over the energy range 0.75 to 6.24 eV. A five-Lorentz-oscillator model was employed to describe the dielectric response of CZT in the range of 1.6 to 6.24 eV. Intensity transmission measurements were …
Date: January 7, 2000
Creator: James, Ralph B.
Object Type: Article
System: The UNT Digital Library
Preconditioning Newton-Krylor Methods for Variably Saturated Flow (open access)

Preconditioning Newton-Krylor Methods for Variably Saturated Flow

In this paper, we compare the effectiveness of three preconditioning strategies in simulations of variably saturated flow. Using Richards' equation as our model, we solve the nonlinear system using a Newton-Krylov method. Since Krylov solvers can stagnate, resulting in slow convergence, we investigate different strategies of preconditioning the Jacobian system. Our work uses a multigrid method to solve the preconditioning systems, with three different approximations to the Jacobian matrix. One approximation lags the nonlinearities, the second results from discarding selected off-diagonal contributions, and the third matrix considered is the full Jacobian. Results indicate that although the Jacobian is more accurate, its usage as a preconditioning matrix should be limited, as it requires much more storage than the simpler approximations. Also, simply lagging the nonlinearities gives a preconditioning matrix that is almost as effective as the full Jacobian but much easier to compute.
Date: January 7, 2000
Creator: Woodward, C. S. & Jones, J. E.
Object Type: Article
System: The UNT Digital Library
Separations technologies supporting the development of a deployable ATW system (open access)

Separations technologies supporting the development of a deployable ATW system

A program has been initiated for the purpose of developing the chemical separations technologies necessary to support a large Accelerator Transmutation of Waste (ATW) system capable of dealing with the projected inventory of spent fuel from the commercial nuclear power stations in the United States. The first several years of the program will be directed toward an elucidation of related technical issues and to the establishment, by means of comprehensive trade studies, of an optimum configuration of the elements of the chemical processing infrastructure required for support of the total ATW system. By adopting this sort of disciplined systems engineering approach, it is expected that development and demonstration costs can be minimized and that it will be possible to deploy an ATW system that is an environmentally sound and economically viable venture.
Date: January 7, 2000
Creator: Laidler, J. J.
Object Type: Article
System: The UNT Digital Library
Something new under the sun -- Office of Solar Energy Technologies (open access)

Something new under the sun -- Office of Solar Energy Technologies

Three of the U.S. Department of Energy's solar technology programs are now under one umbrella: the Office of Solar Energy Technologies or the Solar Office. The solar programs of photovoltaics, concentrating solar power, and solar buildings are now integrated into this office where DOE can combine administrative efforts, build on the strengths of each program, and encourage cooperation that bolsters the impact of each technology.
Date: January 7, 2000
Creator: National Renewable Energy Laboratory (U.S.)
Object Type: Book
System: The UNT Digital Library
SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN (open access)

SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

The primary purpose of this document is to develop a preliminary high-level functional and physical control system architecture for the potential repository at Yucca Mountain. This document outlines an overall control system concept that encompasses and integrates the many diverse process and communication systems being developed for the subsurface repository design. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The Subsurface Repository Integrated Control System design will be composed of a series of diverse process systems and communication networks. The subsurface repository design contains many systems related to instrumentation and control (I&C) for both repository development and waste emplacement operations. These systems include waste emplacement, waste retrieval, ventilation, radiological and air monitoring, rail transportation, construction development, utility systems (electrical, lighting, water, compressed air, etc.), fire protection, backfill emplacement, and performance confirmation. Each of these systems involves some level of I&C and will typically be integrated over a data communications network throughout the subsurface facility. The subsurface I&C systems will also interface with multiple surface-based systems such as site operations, rail transportation, security and safeguards, and electrical/piped utilities. In addition to the I&C systems, the subsurface repository design also contains systems related to …
Date: January 7, 2000
Creator: Randle, D.C.
Object Type: Report
System: The UNT Digital Library
Texas Register, Volume 25, Number 1, Pages 1-248, January 7, 2000 (open access)

Texas Register, Volume 25, Number 1, Pages 1-248, January 7, 2000

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.
Date: January 7, 2000
Creator: Texas. Secretary of State.
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History
Drift waves in general toroidal geometry (open access)

Drift waves in general toroidal geometry

A model, based on gyro-kinetic ions and fluid electrons, to study drift waves in low-beta [beta = (kinetic pressure)/(magnetic pressure)] stellarator plasmas is presented. The model equations are written in straight-field-line coordinates and are valid for arbitrary, fully three-dimensional configurations with closed, nested magnetic surfaces. An implicit method, coupled with a subcycling technique for the electrons, is used to solve the time-dependent, along-the-field-line equations. Numerical calculations are carried out for a 3-field-period toroidal heliac. The geometrical effects that enter the model equations are calculated and displayed in physical space using advanced visualization techniques.
Date: February 7, 2000
Creator: Lewandowski, J.L.V.
Object Type: Report
System: The UNT Digital Library
Drift waves in stellarator geometry (open access)

Drift waves in stellarator geometry

Drift waves are investigated in a real three-dimensional stellarator geometry. A linear system, based on the cold ion fluid model and a ballooning mode formalism, is solved numerically in the geometry of the stellarator H1-NF. The spectra of stable and unstable modes, as well as localization, are discussed. The dependence of the spectrum of the unstable modes on the wavevector, plasma density variation, and the location in the plasma is presented.
Date: February 7, 2000
Creator: Persson, M.; Nadeem, M.; Lewandowski, J.L.V. & Gardner, H.J.
Object Type: Report
System: The UNT Digital Library
EVENT DATA STORAGE AND MANAGEMENT IN STAR. (open access)

EVENT DATA STORAGE AND MANAGEMENT IN STAR.

The Solenoidal Tracker At RHIC (STAR) is a large acceptance collider detector, commissioned for operation at Brookhaven National Laboratory in 1999. STAR is designed to measure the momentum and identify several thousands of particles per event. About 300 Terabytes of data will be generated each year. To handle such a huge amount of data, sophisticated data structures and associated tools were developed. The main features of these data structures are: Data structure is a complicated but flexible set of C++ objects; All data objects are persistent, we do not maintain separate transient and persistent data structures; Persistence of data structure is based on ROOT[?] I/O implementation; Part of ROOT I/O was modified to meet STAR requirements; and The modification of ROOT I/O allows to support automatic schema evolution of STAR data structures. Automatic tools allow reading of old data into new environments. In this paper we present our experience with maintenance of big and complicated OO data structures, especially concerning schema evolution.
Date: February 7, 2000
Creator: Perevoztchikov, V.
Object Type: Article
System: The UNT Digital Library
Improved performance of Li-ion cells under pulsed load using double-layer capacitors in a hybrid circuit mode (open access)

Improved performance of Li-ion cells under pulsed load using double-layer capacitors in a hybrid circuit mode

Electrical characteristics of hybrid power sources consisting of Li-ion cells and double-layer capacitors were studied at 25 C and {minus}20 C. The cells were initially evaluated for pulse performance and then measured in hybrid modes of operation where they were coupled with the high-power capacitors. Cells manufactured by Panasonic measured at 25 C delivered full capacities of 0.76 Ah for pulses up to 3A and cells from A and T delivered full capacities of 0.73 Ah for pulses up to 4A. Measured cell resistances were 0.15 ohms and 0.12 ohms, respectively. These measurements were repeated at {minus}20 C. Direct coupling of the cells and capacitors (coupled hybrid) using 10F Panasonic capacitors in a 8F series/parallel combination extended the full capacity pulse limits (3.0V threshold) to 5.6A for the Panasonic cells and to 9A for the A and T cells. A similar arrangement using 100F capacitors from Elna in a 60F combination increased the Panasonic cell limit to 10 A. Operation in an uncoupled hybrid mode using uncoupled cell/capacitor discharge allowed fill cell capacity usage at 25 C up to the capacitor discharge limit and showed a factor of 5 improvement in delivered capacity at {minus}20 C.
Date: February 7, 2000
Creator: Roth, Emanuel P. & Nagasubramanian, Ganesan
Object Type: Article
System: The UNT Digital Library
Investigation of gas flow in long and narrow channels (open access)

Investigation of gas flow in long and narrow channels

To minimize the viscous flow losses in a microsystem for chemical analysis, the authors have investigated gas flow in long capillary tubes and microchannels to characterize the flow behavior. Both experimental results and theoretical predictions indicate that gas flow in long and narrow channels, as in capillary tubes or rectangular channels, compressibility effect is very important. This leads to a higher mass flow rate than predicted by the incompressible flow model. Different computational fluid dynamics (CFD) codes have been applied to simulate this flow problem. While some existing CFD codes have difficulties to model this problem, other codes, such as MPSalsa, predict a converged and reasonably accurate solution. This difficulty may be caused by numerical solution technique in these computer codes being optimized for incompressible flow problems rather than for compressible low-speed flow problems.
Date: February 7, 2000
Creator: WONG,CHUNGNIN C.; ZOELLER,TRACIE L.; ADKINS,DOUGLAS R. & SHADID,JOHN N.
Object Type: Article
System: The UNT Digital Library
NATO Applicant States: A Status Report (open access)

NATO Applicant States: A Status Report

On March 12, 1999, Poland, the Czech Republic, and Hungary formally became members of the North Atlantic Treaty Organization; nine additional central and eastern European nations have applied to join the alliance: Albania, Bulgaria, Estonia, Latvia, Lithuania, Macedonia, Romania, Slovakia, and Slovenia. There arc several general guidelines for evaluating nations seeking NATO membership; however, these guidelines are not a checklist that, when completed, would automatically guarantee membership. NATO members decide on the basis of consensus whether the admission of a state will serve the interests of the Alliance and promote European security and stability. This report, which was compiled from memoranda prepared in January 1999 at the request of Senator William Roth, contains brief assessments of the NATO applicants' qualifications, compared to those of the three new members, The report was updated in February 2000. The report will be updated as necessary.
Date: February 7, 2000
Creator: Woehrel, Steven; Kim, Julie & Ek, Carl
Object Type: Report
System: The UNT Digital Library
OO Model of Star Detector for Simulation, Visualization and Reconstruction (open access)

OO Model of Star Detector for Simulation, Visualization and Reconstruction

The Solenoidal Tracker At RHIC (STAR) is a large acceptance collider detector, at Brookhaven National Laboratory. Most of the detailed knowledge on the STAR detector is implemented into a GEANT3 based simulation model. This knowledge certainly is valuable for the new STAR OO software. STAR ROOT-based framework was upgraded to provide tools to access this model via a set of TVolume classes. In this paper we present our experience with migration of the GEANT3 based detector simulation for STAR to an OO model.
Date: February 7, 2000
Creator: Fine, V. & Nevski, P.
Object Type: Article
System: The UNT Digital Library
Part 1: Participatory Ergonomics Approach to Waste Container Handling Utilizing a Multidisciplinary Team (open access)

Part 1: Participatory Ergonomics Approach to Waste Container Handling Utilizing a Multidisciplinary Team

This multidisciplinary team approach to waste container handling, developed within the Grassroots Ergonomics process, presents participatory ergonomic interpretations of quantitative and qualitative aspects of this process resulting in a peer developed training. The lower back, shoulders, and wrists were identified as frequently injured areas, so these working postures were a primary focus for the creation of the workers' training. Handling procedures were analyzed by the team to identify common cycles involving one 5 gallon (60 pounds), two 5 gallons (60 and 54 pounds), 30 gallon (216 pounds), and 55 gallon (482 pounds) containers: lowering from transporting to/from transport vehicles, loading/unloading on transport vehicles, and loading onto pallet. Eleven experienced waste container handlers participated in this field analysis. Ergonomic exposure assessment tools measuring these field activities included posture analysis, posture targeting, Lumbar Motion Monitor{trademark} (LMM), and surface electromyography (sEMG) for the erector spinae, infraspinatus, and upper trapezius muscles. Posture analysis indicates that waste container handlers maintained non-neutral lower back postures (flexion, lateral bending, and rotation) for a mean of 51.7% of the time across all activities. The right wrist was in non-neutral postures (radial, ulnar, extension, and flexion) a mean of 30.5% of the time and the left wrist 31.4%. Non-neutral …
Date: February 7, 2000
Creator: Zalk, D.M.; Tittiranonda, P.; Burastero, S.; Biggs, T.W.; Perry, C.M.; Tageson, R. et al.
Object Type: Article
System: The UNT Digital Library
Press and Dryer Roll Surfaces and Web Transfer Systems (open access)

Press and Dryer Roll Surfaces and Web Transfer Systems

None
Date: February 7, 2000
Creator: Patterson, T. F.
Object Type: Report
System: The UNT Digital Library
Problems with Disposal of Pre-AEA Byproduct Material (open access)

Problems with Disposal of Pre-AEA Byproduct Material

None
Date: February 7, 2000
Creator: Egidi, PVE
Object Type: Report
System: The UNT Digital Library
Short pulse laser-induced optical damage and fracto-emission of amorphous, diamond-like carbon (open access)

Short pulse laser-induced optical damage and fracto-emission of amorphous, diamond-like carbon

Short pulse laser damage and ablation of amorphous, diamond-like carbon films is investigated. Material removal is due to fracture of the film and ejection of large fragments, which exhibit a broadband emission of microsecond duration.
Date: February 7, 2000
Creator: Sokolowski-Tinten, K.; Von Der Linde, D.; Siegal, Michael P. & Overmyer, Donald L.
Object Type: Article
System: The UNT Digital Library