We present the results of a search for the Standard Model Higgs boson in its associated production with a W vector boson in p{bar p} collisions at {radical}s = 1.96 TeV using the complete Run IIA dataset with an integrated luminosity of 1.04 fb{sup -1} collected by the D0 experiment. The salient features of this analysis are the extended geometric acceptance by including the pseudorapidity covered by the end cap calorimeter, optimization in b-tagging and event selection criteria. We observe very good agreement in the data compared to the expectation form the modeling of Standard Model background for the WH signal. No excess events in data are observed over the predicted background. We establish that the evidence for observing the Higgs boson in this channel is inconclusive and proceed to set upper cross section limits on the associated WH production at 95% confidence level. We derive the cross section upper limits for the Higgs mass (m{sub H}) ranging from 105 GeV/c{sup 2} to 145 GeV/c{sup 2}. For m{sub H} = 115 GeV/c{sup 2}, the observed (expected) upper limit is 0.8 (0.9) pb compared to the Standard Model expectation of 0.13 pb.

We present results of a search for single top quark production in p{bar p} collisions using a dataset of approximately 1 fb{sup -1} collected with the D0 detector. This analysis considers the muon+jets and electron+jets final states and makes use of Bayesian neural networks to separate the expected signals from backgrounds. The observed excess is associated with a p-value of 0.081%, assuming the background-only hypothesis, which corresponds to an excess over background of 3.2 standard deviations for a Gaussian density. The p-value computed using the SM signal cross section of 2.9 pb is 1.6%, corresponding to an expected significance of 2.2 standard deviations. Assuming the observed excess is due to single top production, we measure a single top quark production cross section of {sigma}(p{bar p} {yields} tb + X, tqb + X) = 4.4 {+-} 1.5 pb.

Methods of analysis of the dynamics of ensembles of charged particles in collider rings are developed. The following problems are posed and solved using normal form transformations and other methods of perturbative nonlinear dynamics: (1) Optimization of the Tevatron dynamics: (a) Skew quadrupole correction of the dynamics of particles in the Tevatron in the presence of the systematic skew quadrupole errors in dipoles; (b) Calculation of the nonlinear tune shift with amplitude based on the results of measurements and the linear lattice information; (2) Optimization of the Muon Collider storage ring: (a) Computation and optimization of the dynamic aperture of the Muon Collider 50 x 50 GeV storage ring using higher order correctors; (b) 750 x 750 GeV Muon Collider storage ring lattice design matching the Tevatron footprint. The normal form coordinates have a very important advantage over the particle optical coordinates: if the transformation can be carried out successfully (general restrictions for that are not much stronger than the typical restrictions imposed on the behavior of the particles in the accelerator) then the motion in the new coordinates has a very clean representation allowing to extract more information about the dynamics of particles, and they are very convenient for …

A first study of single diffractive central high-p{sub T} dijet events in p{bar p} collisions at center-of-mass energy {radical}s = 1.96 TeV is presented, using data recorded by the D0 detector at the Tevatron during RunIIa in 2002-2004. The total integrated luminosity corresponding to the data sample is 398 pb{sup -1}. A diffractive sample is selected using a rapidity gap approach. A precise definition of the rapidity gap constitutes the first part of the thesis. The rapidity gap is defined by means of two parts of the D0 detector--luminosity detectors and calorimeter. Luminosity detectors serve as a basic indicators of diffractive candidates and the calorimeter is used to confirm the low energy activity in the forward region (a rapidity gap). Presented studies of energy deposited in forward part of calorimeter by various types of events yield two rapidity gap definitions. Both of them use a fixed rapidity interval in calorimeter |{eta}| {element_of} [2.6,5.2] and introduce an upper limit on the energy deposited in this region. First definition, which corresponds to the lowest systematical errors, uses a limit of 10 GeV, an energy limit in the second definition is set to 3 GeV. This alternative definition corresponds to the lowest contamination …

Arsenic in drinking water is a major public health problem threatening the lives of over 140 million people worldwide. In Bangladesh alone, up to 57 million people drink arsenic-laden water from shallow wells. ElectroChemical Arsenic Remediation(ECAR) overcomes many of the obstacles that plague current technologies and can be used affordably and on a small-scale, allowing for rapid dissemination into Bangladesh to address this arsenic crisis. In this work, ECAR was shown to effectively reduce 550 - 580 mu g=L arsenic (including both As[III]and As[V]in a 1:1 ratio) to below the WHO recommended maximum limit of 10 mu g=L in synthetic Bangladesh groundwater containing relevant concentrations of competitive ions such as phosphate, silicate, and bicarbonate. Arsenic removal capacity was found to be approximately constant within certain ranges of current density, but was found to change substantially between ranges. In order of decreasing arsenic removal capacity, the pattern was: 0.02 mA=cm2> 0.07 mA=cm2> 0.30 - 1.1 mA=cm2> 5.0 - 100 mA=cm2. Current processing time was found to effect arsenic removal capacity independent of either charge density or current density. Electrode polarization studies showed no passivation of the electrode in the tested range (up to current density 10 mA=cm2) and ruled out oxygen …

An ocean model with adaptive mesh refinement (AMR) capability is presented for simulating ocean circulation on decade time scales. The model closely resembles the LLNL ocean general circulation model with some components incorporated from other well known ocean models when appropriate. Spatial components are discretized using finite differences on a staggered grid where tracer and pressure variables are defined at cell centers and velocities at cell vertices (B-grid). Horizontal motion is modeled explicitly with leapfrog and Euler forward-backward time integration, and vertical motion is modeled semi-implicitly. New AMR strategies are presented for horizontal refinement on a B-grid, leapfrog time integration, and time integration of coupled systems with unequal time steps. These AMR capabilities are added to the LLNL software package SAMRAI (Structured Adaptive Mesh Refinement Application Infrastructure) and validated with standard benchmark tests. The ocean model is built on top of the amended SAMRAI library. The resulting model has the capability to dynamically increase resolution in localized areas of the domain. Limited basin tests are conducted using various refinement criteria and produce convergence trends in the model solution as refinement is increased. Carbon sequestration simulations are performed on decade time scales in domains the size of the North Atlantic and …

This dissertation presents the highest four-momentum transfer, Q^2,quasielastic (x_Bj = 1) results from Experiment E01-020 which systematically explored the 2He(e,e'p)n reaction ("Electro-disintegration" of the deuteron) at three different four-momentum transfers, Q^2 = 0.8, 2.1, and 3.5 GeV^2 and missing momenta, P_miss = 0, 100, 200, 300, 400, and 500 GeV including separations of the longitudinal-transverse interference response function, R_LT, and extractoin of the longitudinal-transverse asymmetry, A_LT. This systematic approach will help to understand the reaction mechanism and the deuteron structure down to the short range part of the nucleon-nucleon interaction which is one of the fundamental missions of nuclear physics. By studying the very short distance structure of the deuteron, one may also determine whether or to what extent the description of nuclei in terms of nucleon/meson degrees of freedom must be supplemented by inclusion of explicit quark effects. The unique combination of energy, current, duty factor, and control of systematics for Hall A at Jefferson Lab made Jefferson Lab the only facility in the world where these systematic studies of the deuteron can be undertaken. This is especially true when we want to understand the short range structure of the deuteron where high energies and high luminosity/duty factor are …

The authors searched for decays of the type B{sub (s)}{sup 0} {yields} h{sup +}h{prime}{sup -} (where h, h{prime} = K or {pi}) in a sample corresponding to 180 pb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV, collected by the upgraded Collider Detector at the Fermilab Tevatron. A total signal of approximately 900 events was reconstructed, and the relative branching fractions ({Beta}) of each decay mode were determined with a likelihood fit.

A search for the Technicolor processes p{bar p} {yields} {rho}{sub T}{sup {+-}} {yields} W{sup {+-}}{pi}{sub T}{sup 0} {yields} {mu}{nu}b{bar b} and p{bar p} {yields} {rho}{sub T}{sup 0} {yields} W{sup {+-}}{pi}{sub T}{sup {+-}} {yields} {mu}{nu}b{bar c} is conducted at the D0 detector. Selection requirements are individually optimized for each of twenty mass hypotheses by means of a random grid search. No excess is seen in a 291 pb{sup -1} data set and 95% confidence level upper limits are set on the Technicolor production cross section. The mass combinations M{sub {rho}} = 195 GeV/c{sup 2}, M{sub {pi}} = 100 GeV/c{sup 2} and M{sub {rho}} = 200 GeV/c{sup 2}, M{sub {pi}} = 105 GeV/c{sup 2} are excluded for the choice of the Technicolor scale parameter M{sub V} = 500 GeV.

The use of boron neutron capture to boost tumor dose in fast neutron therapy has been investigated at several fast neutron therapy centers worldwide. This treatment is termed boron neutron capture enhanced fast neutron therapy (BNCEFNT). It is a combination of boron neutron capture therapy (BNCT) and fast neutron therapy (FNT). It is believed that BNCEFNT may be useful in the treatment of some radioresistant brain tumors, such as glioblastoma multiform (GBM). A boron neutron capture enhanced fast neutron therapy assembly has been designed for the Fermilab Neutron Therapy Facility (NTF). This assembly uses a tungsten filter and collimator near the patient's head, with a graphite reflector surrounding the head to significantly increase the dose due to boron neutron capture reactions. The assembly was designed using Monte Carlo radiation transport code MCNP version 5 for a standard 20x20 cm{sup 2} treatment beam. The calculated boron dose enhancement at 5.7-cm depth in a water-filled head phantom in the assembly with a 5x5 cm{sup 2} collimation was 21.9% per 100-ppm {sup 10}B for a 5.0-cm tungsten filter and 29.8% for a 8.5-cm tungsten filter. The corresponding dose rate for the 5.0-cm and 8.5-cm thick filters were 0.221 and 0.127 Gy/min, respectively; about …

The top quark, the most recently discovered quark, is the most massive known fundamental fermion. Precision measurements of its mass, a free parameter in the Standard Model of particle physics, can be used to constrain the mass of the Higgs Boson. In addition, deviations in the mass as measured in different channels can provide possible evidence for new physics. We describe a measurement of the top quark mass in the decay channel with two charged leptons, known as the dilepton channel, using data collected by the CDF II detector from p{bar p} collisions with {radical}s = 1.96 TeV at the Fermilab Tevatron. The likelihood in top mass is calculated for each event by convolving the leading order matrix element describing q{bar q} {yields} t{bar t} {yields} b{ell}{nu}{sub {ell}}{bar b}{ell}'{nu}{sub {ell}'} with detector resolution functions. The presence of background events in the data sample is modeled using similar calculations involving the matrix elements for major background processes. In a data sample with integrated luminosity of 1.0 fb{sup -1}, we observe 78 candidate events and measure M{sub t} = 164.5 {+-} 3.9(stat.) {+-} 3.9(syst.) GeV/c{sup 2}, the most precise measurement of the top quark mass in this channel to date.

For over decades, focused ion beam (FIB) has been playing a very important role in microscale technology and research, among which, semiconductor microfabrication is one of its biggest application area. As the dimensions of IC devices are scaled down, it has shown the need for new ion beam tools and new approaches to the fabrication of small-scale devices. In the meanwhile, nanotechnology has also deeply involved in material science research and bioresearch in recent years. The conventional FIB systems which utilize liquid gallium ion sources to achieve nanometer scale resolution can no longer meet the various requirements raised from such a wide application area such as low contamination, high throughput and so on. The drive towards controlling materials properties at nanometer length scales relies on the availability of efficient tools. In this thesis, three novel ion beam tools have been developed and investigated as the alternatives for the conventional FIB systems in some particular applications. An integrated focused ion beam (FIB) and scanning electron microscope (SEM) system has been developed for direct doping or surface modification. This new instrument employs a mini-RF driven plasma source to generate focused ion beam with various ion species, a FEI two-lens electron (2LE) column …

We have searched for the Standard Model Higgs boson production in association with a W{sup {+-}} boson. This search is based on the data collected between February 2002 and May 2007, corresponding to an integrated luminosity of 1.9 fb{sup -1} collected by the Collider Detector at Fermilab (CDF) at the Tevatron which is a p{bar p} collider at a center of mass energy 1.96 TeV. W+Higgs channel is one of the most promising channels for the Higgs search at Tevatron in the low Higgs mass region (m{sub H} < 135 GeV/c{sup 2}), where Higgs boson decays into b{bar b} dominantly. The detection of lepton from the W boson decay makes the W+Higgs events much cleaner than the direct Higgs production events which have the largest production cross section. Experimentally we select events with a high p{sub T} lepton, high missing transverse energy and two b-quark jets. This signature is same as for the W+jets background which has a huge cross section. To reduce the W+jets background, b-jet identification algorithms are applied to at least one jet. The expected signal events in 1.9fb{sup -1} are 1.82 {+-} 0.15 and 1.68 {+-} 0.20 for one b-tagged events and two b-tagged events, respectively. …

The rare decay B {yields} {pi}{ell}{sup +}{ell}{sup -} is the simplest manifestation of a b {yields} d{ell}{sup +}{ell}{sup -} flavor-changing neutral current (FCNC) process. This type of process only proceeds through penguin loop or box diagrams and is sensitive to physics at the electroweak scale. It can be used to constrain parameters of the Standard Model and its extensions. B {yields} {pi}{ell}{sup +}{ell}{sup -} events have not yet been observed; the branching fraction is expected to be an order of magnitude smaller than the measured branching fraction for the similar B {yields} K{ell}{sup +}{ell}{sup -} decay. Using 230 million B{bar B} meson pairs collected with the BABAR detector, we have done a search for the rare decay B {yields} {pi}{ell}{sup +}{ell}{sup -}. The data was produced in e+e? collision at the {Upsilon}(4S) resonance in the PEP-II collider between 1999 and 2004. Four exclusive B-meson decay modes have been reconstructed: B{sup +} {yields} {pi}{sup +}{ell}{sup +}{ell}{sup -} and B{sup 0} {yields} {pi}{sup 0}{ell}{sup +}{ell}{sup -}, where {ell}{sup +}{ell}{sup -} is either an electron pair (e{sup +}e{sup -}) or a muon pair ({mu}{sup +}{mu}{sup -}). We find no evidence for a signal, and we obtain upper limits on the branching fractions {Beta}. …

I present a measurement of the t{bar t} differential cross section, d{sigma}/dM{sub t{bar t}}, in p{bar p} collisions at {radical}s = 1.96 TeV using 2.7 fb{sup -1} of CDF II data. I find that d{sigma}/dM{sub t{bar t}} is consistent with the Standard Model expectation, as modeled by PYTHIA with CTEQ5L parton distribution functions. I set limits on the ratio {kappa}/M{sub Pl} in the Randall-Sundrum model by looking for Kaluza Klein gravitons which decay to top quarks. I find {kappa}/M{sub Pl} > 0.16 at the 95% confidence level.

This thesis centers on the use of spectral modeling techniques on data from the Sloan Digital Sky Survey (SDSS) to gain new insights into current questions in galaxy evolution. The SDSS provides a large, uniform, high quality data set which can be exploited in a number of ways. One avenue pursued here is to use the large sample size to measure precisely the mean properties of galaxies of increasingly narrow parameter ranges. The other route taken is to look for rare objects which open up for exploration new areas in galaxy parameter space. The crux of this thesis is revisiting the classical Kennicutt method for inferring the stellar initial mass function (IMF) from the integrated light properties of galaxies. A large data set ({approx} 10{sup 5} galaxies) from the SDSS DR4 is combined with more in-depth modeling and quantitative statistical analysis to search for systematic IMF variations as a function of galaxy luminosity. Galaxy H{alpha} equivalent widths are compared to a broadband color index to constrain the IMF. It is found that for the sample as a whole the best fitting IMF power law slope above 0.5 M{sub {circle_dot}} is {Lambda} = 1.5 {+-} 0.1 with the error dominated by …

In order to better understand the fundamental components that govern catalytic activity, two-dimensional model platinum nanocatalyst arrays have been designed and fabricated. These catalysts arrays are meant to model the interplay of the metal and support important to industrial heterogeneous catalytic reactions. Photolithography and sub-lithographic techniques such as electron beam lithography, size reduction lithography and nanoimprint lithography have been employed to create these platinum nanoarrays. Both in-situ and ex-situ surface science techniques and catalytic reaction measurements were used to correlate the structural parameters of the system to catalytic activity.

Many chemical reactions utilize organometallic complexes as catalysts. These complexes find use in reactions as varied as bond activation, polymerization, and isomerization. This thesis outlines the construction of a new ultrafast laser system with an emphasis on the generation of tunable mid-infrared pulses, data collection, and data analysis.

The shrinking of IC devices has followed the Moore's Law for over three decades, which states that the density of transistors on integrated circuits will double about every two years. This great achievement is obtained via continuous advance in lithography technology. With the adoption of complicated resolution enhancement technologies, such as the phase shifting mask (PSM), the optical proximity correction (OPC), optical lithography with wavelength of 193 nm has enabled 45 nm printing by immersion method. However, this achievement comes together with the skyrocketing cost of masks, which makes the production of low volume application-specific IC (ASIC) impractical. In order to provide an economical lithography approach for low to medium volume advanced IC fabrication, a maskless ion beam lithography method, called Maskless Micro-ion-beam Reduction Lithography (MMRL), has been developed in the Lawrence Berkeley National Laboratory. The development of the prototype MMRL system has been described by Dr. Vinh Van Ngo in his Ph.D. thesis. But the resolution realized on the prototype MMRL system was far from the design expectation. In order to improve the resolution of the MMRL system, the ion optical system has been investigated. By integrating a field-free limiting aperture into the optical column, reducing the electromagnetic interference …

We present a search for the production of neutral Higgs bosons in association with bottom quarks in p{bar p} collisions at {radical}s = 1.96 TeV. The cross section for this process is enhanced in many extensions of the Standard Model (SM), such as in its Minimal Supersymmetric extension (MSSM) at large tan {beta}. The data, corresponding to a recorded integrated luminosity of 1 fb{sup -1}, were collected with the D0 detector at the Fermilab Tevatron Collider. In the absence of a signal a 95% C.L. limit is set on the production cross section times branching ratio, and the results are also interpreted in the MSSM.

None

This dissertation presents a search for large extra dimensions in the single photon plus missing transverse energy final states. We use a data sample of approximately 2.7 fb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV (recorded with the D{sup -} detector) to investigate direct Kaluza Klein graviton production and set limits, at the 95% C.L., on the fundamental mass scale M{sub D} from 970 GeV to 816 GeV for two to eight extra dimensions.

In the first part of this work, we present a search for WW and WZ production in charged lepton, neutrino plus jets final states produced in p{bar p} collisions with {radical}s = 1.96 TeV at the Fermilab Tevatron, using 1.2 fb{sup -1} of data accumulated with the CDF II detector. This channel is yet to be observed in hadron colliders due to the large singleWplus jets background. However, this decay mode has a much larger branching fraction than the cleaner fully leptonic mode making it more sensitive to anomalous triple gauge couplings that manifest themselves at higher transverse W momentum. Because the final state is topologically similar to associated production of a Higgs boson with a W, the techniques developed in this analysis are also applicable in that search. An Artificial Neural Network has been used for the event selection optimization. The theoretical prediction for the cross section is {sigma}{sub WW/WZ}{sup theory} x Br(W {yields} {ell}{nu}; W/Z {yields} jj) = 2.09 {+-} 0.14 pb. They measured N{sub Signal} = 410 {+-} 212(stat) {+-} 102(sys) signal events that correspond to a cross section {sigma}{sub WW/WZ} x Br(W {yields} {ell}{nu}; W/Z {yields} jj) = 1.47 {+-} 0.77(stat) {+-} 0.38(sys) pb. The 95% …

This dissertation describes a measurement of the rate of associated production of the W boson with the charm jet in the proton and anti-proton collisions at the center-of-mass energy of 1.96 TeV at the Fermilab Tevatron Collider. The measurement has direct sensitivity to the strange quark content inside the proton. A direct measurement of the momentum distribution of the strange quark inside the proton is essential for a reliable calculation of new physics signal as well as the background processes at the collider experiments. The identification of events containing a W boson and a charm jet is based on the leptonic decays of the W boson together with a tagging technique for the charm jet identification based on the semileptonic decay of the charm quark into the muon. The charm jet recoiling against the W boson must have a minimum transverse momentum of 20 GeV and an absolute value of pseudorapidity less than 2.5. This measurement utilizes the data collected by the D0 detector at the Fermilab Collider. The measured rate of the charm jet production in association with the W boson in the inclusive jet production with the W boson is 0.074 {+-} 0.023, which is in agreement with …