2,397 Matching Results

Results open in a new window/tab.

Strategies to Address Identified Education Gaps in the Preparation of a National Security Workforce (open access)

Strategies to Address Identified Education Gaps in the Preparation of a National Security Workforce

This report will discuss strategies available to address identified gaps and weaknesses in education efforts aimed at the preparation of a skilled and properly trained national security workforce.The need to adequately train and educate a national security workforce is at a critical juncture. Even though there are an increasing number of college graduates in the appropriate fields, many of these graduates choose to work in the private sector because of more desirable salary and benefit packages. This is contributing to an inability to fill vacant positions at NNSA resulting from high personnel turnover from the large number of retirements. Further, many of the retirees are practically irreplaceable because they are Cold War scientists that have experience and expertise with nuclear weapons.
Date: June 30, 2008
Creator: unknown
Object Type: Text
System: The UNT Digital Library
An Experimental Study of Radiation-Induced Demagnetization of Insertion Device Permanent Magnets (open access)

An Experimental Study of Radiation-Induced Demagnetization of Insertion Device Permanent Magnets

High brilliance in the 3GeV new light source NSLS II is obtained from the high magnetic fields in insertion devices (ID). The beam lifetime is limited to 3h by single Coulomb scattering in the Bunch (Touschek effect). This effect occurs everywhere around the circumference and there is unavoidable beam loss in the adjacent low aperture insertion devices. This raises the issue of degradation and damage of the permanent magnetic material by irradiation with high energy electrons and corresponding shower particles. It is expected that IDs, especially those in-vacuum, would experience changes resulting from exposure to gamma rays, x-rays, electrons and neutrons. By expanding an on-going material radiation damage study at BNL the demagnetization effect of irradiation consisting primarily of neutrons, gamma rays and electrons on a set of NdFeB magnets is studied. Integrated doses ranging from several Mrad to a few Grad were achieved at the BNL Isotope Facility with a 112 MeV, 90 {micro}A proton beam. Detailed information on dose distributions as well as on particle energy spectra on the NdFeB magnets was obtained in realistic simulations with the MARS15 Monte-Carlo code. This paper summarizes the results of this study.
Date: June 23, 2008
Creator: Simos,N.; Job, P.K. & Mokhov, N.
Object Type: Article
System: The UNT Digital Library
Measurement of b-jet Shapes in Inclusive Jet Production in p anti-p Collisions at s**(1/2) = 1.96-TeV (open access)

Measurement of b-jet Shapes in Inclusive Jet Production in p anti-p Collisions at s**(1/2) = 1.96-TeV

We present a measurement of the shapes of b-jets using 300 pb{sup -1} of data obtained with the upgraded Collider Detector at Fermilab (CDF II) in p{bar p} collisions at center of mass energy {radical}s = 1.96 TeV. This measurement covers a wide transverse momentum range, from 52 to 300 GeV/c. Samples of heavy-flavor enhanced jets together with inclusive jets are used to extract the average shapes of b-jets. The b-jets are expected to be broader than inclusive jets. Moreover, b-jets containing a single b-quark are expected to be narrower than those containing a b{bar b} pair from gluon splitting. The measured b-jet shapes are found to be significantly broader than expected from the pythia and HERWIG Monte Carlo simulations. This effect may arise from an underestimation of the fraction of b-jets originating from gluon splitting in these simulations.
Date: June 1, 2008
Creator: Aaltonen, T.
Object Type: Article
System: The UNT Digital Library
Wireless Indoor Location Estimation Based on Neural Network RSS Signature Recognition (LENSR) (open access)

Wireless Indoor Location Estimation Based on Neural Network RSS Signature Recognition (LENSR)

Location Based Services (LBS), context aware applications, and people and object tracking depend on the ability to locate mobile devices, also known as localization, in the wireless landscape. Localization enables a diverse set of applications that include, but are not limited to, vehicle guidance in an industrial environment, security monitoring, self-guided tours, personalized communications services, resource tracking, mobile commerce services, guiding emergency workers during fire emergencies, habitat monitoring, environmental surveillance, and receiving alerts. This paper presents a new neural network approach (LENSR) based on a competitive topological Counter Propagation Network (CPN) with k-nearest neighborhood vector mapping, for indoor location estimation based on received signal strength. The advantage of this approach is both speed and accuracy. The tested accuracy of the algorithm was 90.6% within 1 meter and 96.4% within 1.5 meters. Several approaches for location estimation using WLAN technology were reviewed for comparison of results.
Date: June 1, 2008
Creator: Derr, Kurt & Manic, Milos
Object Type: Article
System: The UNT Digital Library
Status of the NSLS-II Injection System Design (open access)

Status of the NSLS-II Injection System Design

The NSLS-II is a new ultra-bright 3rd generation 3 GeV light source that will be built at Brookhaven National Laboratory. Its design is well under way. The requirements for the compact injector complex, which will continuously provide 3 GeV electrons for top-off injection into the storage ring, are demanding: high reliability, relatively high charge and low losses. The injector consists of a linear accelerator, a full-energy booster, as well as transport lines, and an injection straight section. In this paper we give an overview of the NSLS-II injector, discuss its status, specifications, and the design challenges.
Date: June 23, 2008
Creator: Shaftan,T.
Object Type: Article
System: The UNT Digital Library
High-intensity polarized H-(proton), deuteron and 3He++ion source development at BNL. (open access)

High-intensity polarized H-(proton), deuteron and 3He++ion source development at BNL.

New techniques for the production of polarized electron, H{sup -} (proton), D (D+) and {sup 3}H{sup ++} ion beams are discussed. Feasibility studies of these techniques are in progress at BNL. An Optically Pumped Polarized H{sup -} Ion Source (OPPIS) delivers beam for polarization studies in RHIC. The polarized deuteron beam will be required for the deuteron Electron Dipole Moment (EDM) experiment, and the {sup 3}H{sup ++} ion beam is a part of the experimental program for the future eRHIC (Electron Ion) collider.
Date: June 23, 2008
Creator: Zelenski,A.
Object Type: Article
System: The UNT Digital Library
Recent Lifetime and Mixing Measurements at the Tevatron (open access)

Recent Lifetime and Mixing Measurements at the Tevatron

None
Date: June 1, 2008
Creator: Liu, Chunlei & U., /Pittsburgh
Object Type: Article
System: The UNT Digital Library
Setup and performance of RHIC for the 2008 run with deuteron-gold collisions. (open access)

Setup and performance of RHIC for the 2008 run with deuteron-gold collisions.

This year (2008) deuterons and gold ions were collided in the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) for the first time since 2003. The setup and performance of the collider for the 2008 run is reviewed with a focus on improvements that have led to an order of magnitude increase in luminosity over that achieved in the 2003 run.
Date: June 23, 2008
Creator: Gardner,C.; Abreu, N.P.; Ahren, L.; Alessi, J.; Bai, M. & al., et
Object Type: Article
System: The UNT Digital Library
Benchmarking of collimation tracking using RHIC beam loss data. (open access)

Benchmarking of collimation tracking using RHIC beam loss data.

State-of-the-art tracking tools were recently developed at CERN to study the cleaning efficiency of the Large Hadron Collider (LHC) collimation system. In order to estimate the prediction accuracy of these tools, benchmarking studies can be performed using actual beam loss measurements from a machine that already uses a similar multistage collimation system. This paper reviews the main results from benchmarking studies performed with specific data collected from operations at the Relativistic Heavy Ion Collider (RHIC).
Date: June 23, 2008
Creator: Robert-Demolaize,G. & Drees, A.
Object Type: Article
System: The UNT Digital Library
HIGHLY ENRICHED URANIUM BLEND DOWN PROGRAM AT THE SAVANNAH RIVER SITE PRESENT AND FUTURE (open access)

HIGHLY ENRICHED URANIUM BLEND DOWN PROGRAM AT THE SAVANNAH RIVER SITE PRESENT AND FUTURE

The Department of Energy (DOE) and Tennessee Valley Authority (TVA) entered into an Interagency Agreement to transfer approximately 40 metric tons of highly enriched uranium (HEU) to TVA for conversion to fuel for the Browns Ferry Nuclear Power Plant. Savannah River Site (SRS) inventories included a significant amount of this material, which resulted from processing spent fuel and surplus materials. The HEU is blended with natural uranium (NU) to low enriched uranium (LEU) with a 4.95% 235U isotopic content and shipped as solution to the TVA vendor. The HEU Blend Down Project provided the upgrades needed to achieve the product throughput and purity required and provided loading facilities. The first blending to low enriched uranium (LEU) took place in March 2003 with the initial shipment to the TVA vendor in July 2003. The SRS Shipments have continued on a regular schedule without any major issues for the past 5 years and are due to complete in September 2008. The HEU Blend program is now looking to continue its success by dispositioning an additional approximately 21 MTU of HEU material as part of the SRS Enriched Uranium Disposition Project.
Date: June 5, 2008
Creator: Magoulas, V; Charles Goergen, C & Ronald Oprea, R
Object Type: Article
System: The UNT Digital Library
Single-Phase Self-Oscillating Jets for Enhanced Heat Transfer: Preprint (open access)

Single-Phase Self-Oscillating Jets for Enhanced Heat Transfer: Preprint

Self-oscillating jets have potential to cool insulated gate bipolar transistors in vehicle power electronics modules.
Date: June 1, 2008
Creator: Narumanchi, S.; Kelly, K.; Mihalic, M.; Gopalan, S.; Hester, R. & Vlahinos, A.
Object Type: Article
System: The UNT Digital Library
Uncoupled achromatic tilted S-bend (open access)

Uncoupled achromatic tilted S-bend

A particular section of the electron beam transport line, to be used in the e-cooling project [l] of the Relativistic Heavy Ion Collider (RHIC), is constrained to displace the trajectory with both horizontal and vertical offsets so that the outgoing beamline is parallel to the incoming beamline. We also require that section be achromatic in both planes. This mixed horizontal and vertical achromatic Sbend is accomplished by rotating the two dipoles and the quadrupoles of the line, about the longitudinal axis of the incoming beam. However such a rotation of the magnetic elements may couple the transported beam through the first order beam transfer matrix (linear coupling). In this paper we study a sufficient condition, that the first order transport matrix (R-matrix) can satisfy, so that this section of beam transfer line is both achromatic and linearly uncoupled. We provide a complete solution for the beam optics which satisfies both conditions.
Date: June 23, 2008
Creator: Tsoupas, N.; Kayran, D.; Litvinenko, V. & MacKay, W. W.
Object Type: Article
System: The UNT Digital Library
The US Support program to IAEA Safeguards - 2008 (open access)

The US Support program to IAEA Safeguards - 2008

The U.S. Support Program to IAEA Safeguards (USSP) was established in 1977 to provide technical assistance to the IAEA Department of Safeguards. Since that time the U.S. Department of State has provided funding of over $200 million and over 900 tasks have been completed by USSP contractors on behalf of the KEA. The USSP is directed by a U.S. interagency subcommittee known as the Subgroup on Safeguards Technical Support (SSTS) and is managed by the International Safeguards Project Office (ISPO) at Brookhaven National Laboratory. In recent years, the SSTS and ISPO have identified priorities to guide the process of determining which IAEA requests are aligned with US. policy and will be funded. The USSP priorities are reviewed and updated prior to the USSP Annual Review Meeting which is hosted by the International Atomic Energy Agency (IAEA) each spring in Vienna, Austria. This paper will report on the 2008 USSP priorities and be an introduction for a session which will consist of four papers on USSP priorities and four other papers related to USSP activities.
Date: June 9, 2008
Creator: Pepper,S.
Object Type: Article
System: The UNT Digital Library
In-situ Spectroscopy of Water Oxidation at Ir Oxide Nanocluster Drivenby Visible TiOCr Charge-Transfer Chromophore in Mesoporous Silica (open access)

In-situ Spectroscopy of Water Oxidation at Ir Oxide Nanocluster Drivenby Visible TiOCr Charge-Transfer Chromophore in Mesoporous Silica

An all-inorganic photocatalytic unit consisting of a binuclear TiOCr charge-transfer chromophore coupled to an Ir oxide nanocluster has been assembled on the pore surface of mesoporous silica AlMCM-41. In situ FT-Raman and EPR spectroscopy of an aqueous suspension of the resulting IrxOy-TiCr-AlMCM-41 powder reveal the formation of superoxide species when exciting the Ti(IV)OCr(III) --> Ti(III)OCr(IV) metal-to-metal charge-transfer chromophore with visible light. Use of H218O confirms that the superoxide species originates from oxidation of water. Photolysis in the absence of persulfate acceptor leads to accumulation of Ti(III) instead. The results are explained by photocatalytic oxidation of water at Ir oxide nanoclusters followed by trapping of the evolving O2 by transient Ti(III) centers to yield superoxide. Given the flexibility to select donor metals with appropriate redox potential, photocatalytic units consisting of a binuclear charge-transfer chromophore coupled to a water oxidation catalyst shown here constitute a step towards thermodynamically efficient visible light water oxidation units.
Date: June 3, 2008
Creator: Frei, Heinz; Han, Hongxian & Frei, Heinz
Object Type: Article
System: The UNT Digital Library
Production, Characterization, and Acceleration of Optical Microbunches (open access)

Production, Characterization, and Acceleration of Optical Microbunches

Optical microbunches with a spacing of 800 nm have been produced for laser acceleration research. The microbunches are produced using a inverse Free-Electron-Laser (IFEL) followed by a dispersive chicane. The microbunched electron beam is characterized by coherent optical transition radiation (COTR) with good agreement to the analytic theory for bunch formation. In a second experiment the bunches are accelerated in a second stage to achieve for the first time direct net acceleration of electrons traveling in a vacuum with visible light. This dissertation presents the theory of microbunch formation and characterization of the microbunches. It also presents the design of the experimental hardware from magnetostatic and particle tracking simulations, to fabrication and measurement of the undulator and chicane magnets. Finally, the dissertation discusses three experiments aimed at demonstrating the IFEL interaction, microbunch production, and the net acceleration of the microbunched beam. At the close of the dissertation, a separate but related research effort on the tight focusing of electrons for coupling into optical scale, Photonic Bandgap, structures is presented. This includes the design and fabrication of a strong focusing permanent magnet quadrupole triplet and an outline of an initial experiment using the triplet to observe wakefields generated by an electron …
Date: June 20, 2008
Creator: Sears, Christopher M.S. & /SLAC, /Stanford U.
Object Type: Thesis or Dissertation
System: The UNT Digital Library
Economic Benefits, Carbon Dioxide (CO2) Emissions Reductions, and Water Conservation Benefits from 1000 Megawatts (MW) of New Wind Power in Nebraska (Fact Sheet) (open access)

Economic Benefits, Carbon Dioxide (CO2) Emissions Reductions, and Water Conservation Benefits from 1000 Megawatts (MW) of New Wind Power in Nebraska (Fact Sheet)

The U.S. Department of Energy's Wind Powering America Program is committed to educating state-level policy makers and other stakeholders about the economic, CO2 emissions, and water conservation impacts of wind power. This analysis highlights the expected impacts of 1000 MW of wind power in Nebraska. We forecast the cumulative economic benefits from 1000 MW of development in Nebraska to be $1.1 billion, annual CO2 reductions are estimated at 4.1 million tons, and annual water savings are 1,840 million gallons.
Date: June 1, 2008
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Analysis of Thermally Induced Changes in Fractured Rock Permeability during Eight Years of Heating and Cooling at the Yucca Mountain Drift Scale Test (open access)

Analysis of Thermally Induced Changes in Fractured Rock Permeability during Eight Years of Heating and Cooling at the Yucca Mountain Drift Scale Test

We analyzed a data set of thermally induced changes in fractured rock permeability during a four-year heating (up to 200 C) and subsequent four-year cooling of a large volume, partially saturated and highly fractured volcanic tuff at the Yucca Mountain Drift Scale Test, in Nevada, USA. Permeability estimates were derived from about 700 pneumatic (air-injection) tests, taken periodically at 44 packed-off borehole intervals during the heating and cooling cycle from November 1997 through November 2005. We analyzed air-permeability data by numerical modeling of thermally induced stress and moisture movements and their impact on air permeability within the highly fractured rock. Our analysis shows that changes in air permeability during the initial four-year heating period, which were limited to about one order of magnitude, were caused by the combined effects of thermal-mechanically-induced stress on fracture aperture and thermal-hydrologically-induced changes in fracture moisture content. At the end of the subsequent four-year cooling period, air-permeability decreases (to as low as 0.2 of initial) and increases (to as high as 1.8 of initial) were observed. By comparison to the calculated thermo-hydro-elastic model results, we identified these remaining increases or decreases in air permeability as irreversible changes in intrinsic fracture permeability, consistent with either inelastic …
Date: June 1, 2008
Creator: Rutqvist, J.; Freifeld, B.; Min, K.-B.; Elsworth, D. & Tsang, Y.
Object Type: Article
System: The UNT Digital Library
Nevada Test Site National Emission Standards for Hazardous Air Pollutants Calendar Year 2007 (open access)

Nevada Test Site National Emission Standards for Hazardous Air Pollutants Calendar Year 2007

The Nevada Test Site (NTS) is operated by the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office. From 1951 through 1992, the NTS was operated as the nation's site for nuclear weapons testing. The release of man-made radionuclides from the NTS as a result of testing activities has been monitored since the first decade of atmospheric testing. After 1962, when nuclear tests were conducted only underground, the radiation exposure to the public surrounding the NTS was greatly reduced. After the 1992 moratorium on nuclear testing, radiation monitoring on the NTS focused on detecting airborne radionuclides which come from historically contaminated soils resuspended into the air (e.g., by winds) and tritium-contaminated soil moisture emitted to the air from soils through evapotranspiration. To protect the public from harmful levels of man-made radiation, the Clean Air Act, National Emission Standards for Hazardous Air Pollutants (NESHAP) (Title 40 Code of Federal Regulations [CFR] Part 61 Subpart H) limits the release of radioactivity from a U.S. Department of Energy facility (e.g., the NTS) to 10 millirem per year (mrem/yr) effective dose equivalent to any member of the public. This is the dose limit established for someone living off of the NTS from …
Date: June 1, 2008
Creator: Grossman, Robert & Warren, Ronald
Object Type: Report
System: The UNT Digital Library
Commercial Off-the-Shelf (COTS) Components and Enterprise Component Information System (eCIS) (open access)

Commercial Off-the-Shelf (COTS) Components and Enterprise Component Information System (eCIS)

The purpose of the project was to develop the processes for using commercial off-the-shelf (COTS) parts for WR production and to put in place a system for implementing the data management tools required to disseminate, store, track procurement, and qualify vendors. Much of the effort was devoted to determining if the use of COTS parts was possible. A basic question: How does the Nuclear Weapons Complex (NWC) begin to use COTS in the weapon Stockpile Life Extension Programs with high reliability, affordability, while managing risk at acceptable levels? In FY00, it was determined that a certain weapon refurbishment program could not be accomplished without the use of COTS components. The elements driving the use of COTS components included decreased cost, greater availability, and shorter delivery time. Key factors that required implementation included identifying the best suppliers and components, defining life cycles and predictions of obsolescence, testing the feasibility of using COTS components with a test contractor to ensure capability, as well as quality and reliability, and implementing the data management tools required to disseminate, store, track procurement, and qualify vendors. The primary effort of this project then was to concentrate on the risks involved in the use of COTS and …
Date: June 30, 2008
Creator: Minihan, John; Schmidt, Ed; Enserro, Greg & Thompson, Melissa
Object Type: Report
System: The UNT Digital Library
Development and Test of TQC models, LARP Technological Quadrupole Magnets (open access)

Development and Test of TQC models, LARP Technological Quadrupole Magnets

In support of the development of a large-aperture Nb3Sn superconducting quadrupole for the Large Hadron Collider (LHC) luminosity upgrade, two-layer quadrupole models (TQC and TQS) with 90mm aperture are being constructed at Fermilab and LBNL within the framework of the US LHC Accelerator Research Program (LARP). This paper describes the development and test of TQC01b, the second TQC model, and the experience during construction of TQE02 and TQC02, subsequent models in the series. ANSYS analysis of the mechanical structure, its underlying assumptions, and changes based on experience with TQC01 are presented and discussed. Construction experience, in-process measurements, and modifications to the assembly since TQC01 are described. The test results presented here include magnet strain and quench performance during training of TQC01b, as well as quench studies of current ramp rate dependence.
Date: June 1, 2008
Creator: Bossert, R. C.; Ambrosio, G.; Andreev, N.; Barzi, E.; Carcagno, R.; Feher, S. et al.
Object Type: Article
System: The UNT Digital Library
A New Type of Steady and Stable, Laminar, Premixed Flame in Ultra-Lean, Hydrogen-Air Combustion (open access)

A New Type of Steady and Stable, Laminar, Premixed Flame in Ultra-Lean, Hydrogen-Air Combustion

Ultra-lean, hydrogen-air mixtures are found to support another kind of laminar flame that is steady and stable beside flat flames and flame balls. Direct numerical simulations are performed of flames that develop into steadily and stably propagating cells. These cells were the original meaning of the word"flamelet'' when they were observed in lean flammability studies conducted early in the development of combustion science. Several aspects of these two-dimensional flame cells are identified and are contrasted with the properties of one-dimensional flame balls and flat flames. Although lean hydrogen-air flames are subject to thermo-diffusive effects, in this case the result is to stabilize the flame rather than to render it unstable. The flame cells may be useful as basic components of engineering models for premixed combustion when the other types of idealized flames are inapplicable.
Date: June 30, 2008
Creator: Grcar, Joseph F. & Grcar, Joseph F
Object Type: Article
System: The UNT Digital Library
A study of muon neutrino disappearance with the MINOS detectors and the NuMI neutrino beam (open access)

A study of muon neutrino disappearance with the MINOS detectors and the NuMI neutrino beam

This thesis presents the results of an analysis of {nu}{sub {mu}} disappearance with the MINOS experiment, which studies the neutrino beam produced by the NuMI facility at Fermi National Accelerator Laboratory. The rates and energy spectra of charged current {nu}{sub {mu}} interactions are measured in two similar detectors, located at distances of 1 km and 735 km along the NuMI beamline. The Near Detector provides accurate measurements of the initial beam composition and energy, while the Far Detector is sensitive to the effects of neutrino oscillations. The analysis uses data collected between May 2005 and March 2007, corresponding to an exposure of 2.5 x 10{sup 20} protons on target. As part of the analysis, sophisticated software was developed to identify muon tracks in the detectors and to reconstruct muon kinematics. Events with reconstructed tracks were then analyzed using a multivariate technique to efficiently isolate a pure sample of charged current {nu}{sub {mu}} events. An extrapolation method was also developed, which produces accurate predictions of the Far Detector neutrino energy spectrum, based on data collected at the Near Detector. Finally, several techniques to improve the sensitivity of an oscillation measurement were implemented, and a full study of the systematic uncertainties was …
Date: June 1, 2008
Creator: Marshall, John Stuart & U., /Cambridge
Object Type: Thesis or Dissertation
System: The UNT Digital Library
China's Top-1000 Energy-Consuming Enterprises Program:Reducing Energy Consumption of the 1000 Largest Industrial Enterprises in China (open access)

China's Top-1000 Energy-Consuming Enterprises Program:Reducing Energy Consumption of the 1000 Largest Industrial Enterprises in China

In 2005, the Chinese government announced an ambitious goal of reducing energy consumption per unit of GDP by 20% between 2005 and 2010. One of the key initiatives for realizing this goal is the Top-1000 Energy-Consuming Enterprises program. The energy consumption of these 1000 enterprises accounted for 33% of national and 47% of industrial energy usage in 2004. Under the Top-1000 program, 2010 energy consumption targets were determined for each enterprise. The objective of this paper is to evaluate the program design and initial results, given limited information and data, in order to understand the possible implications of its success in terms of energy and carbon dioxide emissions reductions and to recommend future program modifications based on international experience with similar target-setting agreement programs. Even though the Top-1000 Program was designed and implemented rapidly, it appears that--depending upon the GDP growth rate--it could contribute to somewhere between approximately 10% and 25% of the savings required to support China's efforts to meet a 20% reduction in energy use per unit of GDP by 2010.
Date: June 2, 2008
Creator: Price, Lynn; Price, Lynn; Wang, Xuejun & Yun, Jiang
Object Type: Report
System: The UNT Digital Library
Analysis of Sub-Hourly Ramping Impacts of Wind Energy and Balancing Area Size: Preprint (open access)

Analysis of Sub-Hourly Ramping Impacts of Wind Energy and Balancing Area Size: Preprint

In this paper, we analyze sub-hourly ramping requirements and the benefit of combining Balancing Authority operations with significant wind penetrations.
Date: June 1, 2008
Creator: Milligan, M. & Kirby, B.
Object Type: Article
System: The UNT Digital Library