The removal of cesium from aqueous waste solution was investigated in a column setup using SuperLig(R) 644 resin. The resin was significantly coarser in size than those used in previous studies because of hydraulic problems encountered during pilot-scale tests. The bed volume (BV = 140) at the onset of breakthrough surpassed the design requirement of 100 BV at 50 percent breakthrough. The percent of cesium removed by the resin at the onset of breakthrough was 99.96. The elution of cesium with 0.5 M HNO3 was satisfactory with a peak BV of 2.5. The elution BV for C/Co = 0.01 was 10, which is less than the target of 15 BV. The percent of sorbed cesium eluted from the resin was 99.88 percent. In addition, the BV of the various solutions used for the supporting process steps (feed displacement, post-feed displacement rinse, post-elution rinse, and regeneration) of the cesium ion exchange system was sufficient.

The underlying hypothesis of this project was that optimal alpha emitter-based radioimmunotherapy (RAIT) could be achieved by pairing the physical half-life of the radioisotope to the biological half-life of the targeting vehicle. The project had two specific aims. The first aim was to create and optimize the therapeutic efficacy of 211At-SAPS-C6.5 diabody conjugates. The second aim was to develop bispecific-targeting strategies that increase the specificity and efficacy of alpha-emitter-based RAIT. In the performance of the first aim, we created 211At-SAPS-C6.5 diabody conjugates that specifically targeted the HER2 tumor associated antigen. In evaluating these immunoconjugates we determined that they were capable of efficient tumor targeting and therapeutic efficacy of established human tumor xenografts growing in immunodeficient mice. We also determined that therapeutic doses were associated with late renal toxicity, likely due to the role of the kidneys in the systemic elimination o f these agents. We are currently performing more studies focused on better understanding the observed toxicity. In the second aim, we successfully generated bispecific single-chain Fv (bs-scFv) molecules that co-targeted HER2 and HER3 or HER2 and HER4. The in vitro kinetics and in vivo tumor-targeting properties of these molecules were evaluated. These studies revealed that the bs-scFv molecules selectively …

We study predictions for B-physics in a class of models, recently introduced, with a non-supersymmetric warped extra dimension. In these models few ({approx} 3) TeV Kaluza-Klein masses are consistent with electroweak data due to bulk custodial symmetry. Furthermore, there is an analog of GIM mechanism which is violated by the heavy top quark (just as in SM) leading to striking signals at B-factories: (1) New Physics (NP) contributions to {Delta}F = 2 transitions are comparable to SM. This implies that, within this NP framework, the success of the SM unitarity triangle fit is a ''coincidence''. Thus, clean extractions of unitarity angles via e.g. B {yields} {pi}{pi}, {rho}{pi}, {rho}{rho}, DK are likely to be affected, in addition to O(1) deviation from SM prediction in Bs mixing. (2) O(1) deviation from SM predictions for B {yields} X{sub s}{ell}{sup +}{ell}{sup -} in rate as well as in forward-backward and direct CP asymmetry. (3) Large mixing-induced CP asymmetry in radiative B decays, wherein the SM unambiguously predicts very small asymmetries. Also, with KK masses 3 TeV or less, and with anarchic Yukawa masses, contributions to electric dipole moments of the neutron are roughly 20 times larger than the current experimental bound so that this …

A synthetic Topopah Spring Tuff water representative of one type of pore water at Yucca Mountain, Nevada (USA) was evaporated at 95 C in a series of experiments to determine the geochemical controls for brines that may form on, and possibly impact upon the long-term integrity of waste containers and drip shields at the designated high-level, nuclear-waste repository. Solution chemistry, condensed vapor chemistry, and precipitate mineralogy were used to identify important chemical divides and to validate geochemical calculations of evaporating water chemistry using a high temperature Pitzer thermodynamic database. The water evolved towards a complex ''sulfate type'' brine that contained about 45 mol% Na, 40 mol% Cl, 9 mol% NO{sub 3}, 5 mol% K, and less than 1 mol% each of SO{sub 4}, Ca, Mg, {Sigma}CO{sub 2}(aq), F, and Si. All measured ions in the condensed vapor phase were below detection limits. The mineral precipitates identified were halite, anhydrite, bassanite, niter and nitratine. Trends in the solution composition and identification of CaSO{sub 4} solids suggest that fluorite, carbonate, sulfate, and magnesium-silicate precipitation control the aqueous solution composition of sulfate type waters by removing fluoride, calcium, and magnesium during the early stages of evaporation. In most cases, the high temperature Pitzer …

The discovery that ultra-intense laser pulses (I > 10{sup 18} W/cm{sup 2}) can produce short pulse, high energy proton beams has renewed interest in the fundamental mechanisms that govern particle acceleration from laser-solid interactions. Experiments have shown that protons present as hydrocarbon contaminants on laser targets can be accelerated up to energies > 50 MeV. Different theoretical models that explain the observed results have been proposed. One model describes a front-surface acceleration mechanism based on the ponderomotive potential of the laser pulse. At high intensities (I > 10{sup 18} W/cm{sup 2}), the quiver energy of an electron oscillating in the electric field of the laser pulse exceeds the electron rest mass, requiring the consideration of relativistic effects. The relativistically correct ponderomotive potential is given by U{sub p} = ([1 + I{lambda}{sup 2}/1.3 x 10{sup 18}]{sup 1/2} - 1) m{sub o}c{sup 2}, where I{lambda}{sup 2} is the irradiance in W {micro}m{sup 2}/cm{sup 2} and m{sub o}c{sup 2} is the electron rest mass. At laser irradiance of I{lambda}{sup 2} {approx} 10{sup 20} W {micro}m{sup 2}/cm{sup 2}, the ponderomotive potential can be of order several MeV. A few recent experiments--discussed in Chapter 3 of this thesis--consider this ponderomotive potential sufficiently strong to accelerate …

wxWindows is an Open Source, platform independent, User Interface (UI) which has been in development for over eleven years (http://www.wxwindows.org). Currently wxWindows is actively supported for the Linux/Unix (X11, Motif and GTK+), Mac OS 9 and X, all Win32 OSes, MGL, and OS/2 operating systems. wxWindows is written in C++ using an object oriented programming framework; it is a reasonably lightweight API (called wxWidgets) sitting over the native graphics packages of the various platforms it supports. The original version of CALE was written for the basic target platform of Unix using X11 as the graphics package. There have been separate efforts to port the code to Mac OS 9, Mac OS X, Win32, Windows Services for Unix (SFU) and CygWin. Each of these used a variety of different graphical interface approaches and build/make systems. For instance Windows SFU and CygWin could still only use X11 graphics. So could the Win32 version, if a X11 server library and client software were installed. A native Win32 version of CALE was contemplated, but never started. The Macintosh versions were completed but never widely distributed to the users. Given the growing code version support issues, and the slow deviation from the portable code model …

VISA II is the follow-up project to the successful Visible to Infrared SASE Amplifier (VISA) experiment at the Accelerator Test Facility (ATF) in Brookhaven National Lab (BNL). This paper will report the motivation for and status of the two main experiments associated with the VISA II program. One goal of VISA II is to perform an experimental study of the physics of a chirped beam SASE FEL at the upgraded facilities of the ATF. This requires a linearization of the transport line to preserve energy chirping of the electron beam at injection. The other planned project is a strong bunch compression experiment, where the electron bunch is compressed in the chicane, and the dispersive beamline transport, allowing studies of deep saturation.

The properties of a broad 2.86 eV photoluminescence band in carbon-doped GaN were studied as a function of C-doping level, temperature, and excitation density. The results are consistent with a C{sub Ga}-C{sub N} deep donor-deep acceptor recombination mechanism as proposed by Seager et al. For GaN:C grown by molecular-beam epitaxy (MBE) the 2.86 eV band is observed in Si co-doped layers exhibiting high n-type conductivity as well as in semi-insulating material. For low excitation density (4 W/cm{sup 2}) the 2.86 eV band intensity decreases as a function of cw-laser exposure time over a period of many minutes. The transient behavior is consistent with a model based on carrier diffusion and charge trapping-induced Coulomb barriers. The temperature dependence of the blue luminescence below 150 K was different for carbon-contaminated GaN grown by metalorganic vapor phase epitaxy (MOVPE) compared to C-doped MBE GaN.

Steel companies in many areas of the country have found it increasingly difficult to attract talented recent graduates of college and university engineering and applied science programs to the Electric Arc Furnace iron & steel industry. College student involvement in co-operative programs at steel companies can attract needed talent to the industry. Additionally, certain R & D needs identified in the Steel Industry Technology Roadmap are addressed as co-operative program activities. The Steel Manufacturers Association (''SMA'') therefore established a co-operative education program for selected college students who have completed the first or second year of a four or five-year college program, to be recognized as SMA Co-Operative Fellows, in regard to their summer and fall semester projects with SMA's member companies.

Reactive radionuclides, such as the thorium isotopes, show measurable deficiencies in the oceanic water column because of their removal by chemical scavenging due to the particle flux. Measurement of the deficiency, coupled with measurement of the radionuclide concentration in particles, allows a determination of the effective particle sinking velocity. Results to date suggest that the effective particle sinking velocity is remarkably invariant with depth. This leads to the tentative suggestion that POC concentration profiles may, to a good approximation, be used directly to determine length scales for the remineralization of sinking organic matter. Further measurements are in progress to test this idea and to evaluate its limitations. Knowledge of the remineralization length scale is essential to an evaluation of the efficiency of the biological pump as a means for deep sequestering of carbon in the ocean.

This report discusses a variety of issues pertaining to energy policy. It includes information about most recent developments, background and analysis broken down into major categories, and relevant legislation.

None

High efficiency frequency conversion while operating at average power is critical for the Mercury laser. We will demonstrate average power frequency conversion of face-cooled DKDP and YCOB crystals using a sapphire heat spreader approach.

This report is one of a series that profiles the emergency management and homeland security statutory authorities of the 50 states, the District of Columbia, the Commonwealth of the Northern Mariana Islands, the Commonwealth of Puerto Rico, and three territories (American Samoa, Guam, and the U.S. Virgin Islands). Each profile identifies the more significant elements of state statutes, generally as codified. This report focuses on the state of Rhode Island.

The dynamic fracture of ductile metals is known to occur through the nucleation and growth of microscopic voids. As the voids grow, the surrounding metal is plastically deformed to accommodate the change in void volume. In order to gain better insight into void growth, gas gun recovery experiments were used to study incipient spallation fracture in light metals (Al, Cu, V). In addition to in-situ free surface velocity wave-profiles, the recovered samples were first analyzed using 3D X-ray tomography and then sectioned for 2D microscopy. The void size and spatial distribution were determined directly from the X-ray tomography. The single crystal samples show a bimodal distribution of small voids with large (50-100 micron) well separated voids. The plastically damaged region surrounding the large voids is quantified using optical and electron backscattering microscopy. Microhardness measurements indicate this region to be harder than the surrounding metal. Concurrently, a molecular dynamics model of void nucleation and growth at high strain-rate was developed. The model is consistent with experimental observations, e.g. voids nucleate at the weakest points in the metal such as inclusions and grain boundary junctions. The nature of void growth in a single crystal is sensitive to the crystal structure with initially …

Bounds on transport coefficients of random polycrystals of laminates are presented, including the well-known Hashin-Shtrikman bounds and some newly formulated bounds involving two formation factors for a two-component porous medium. Some new types of self-consistent estimates are then formulated based on the observed analytical structure both of these bounds and also of earlier self-consistent estimates (of the CPA or coherent potential approximation type). A numerical study is made, assuming first that the internal structure (i.e., the laminated grain structure) is not known, and then that it is known. The purpose of this aspect of the study is to attempt to quantify the differences in the predictions of properties of a system being modeled when such organized internal structure is present in the medium but detailed spatial correlation information may or (more commonly) may not be available. Some methods of estimating formation factors from data are also presented and then applied to a high-contrast fluid-permeability data set. Hashin-Shtrikman bounds are found to be very accurate estimates for low contrast heterogeneous media. But formation factor lower bounds are superior estimates for high contrast situations. The new self-consistent estimators also tend to agree better with data than either the bounds or the CPA …

Layered earth models are well justified by experience, and provide a simple means of studying fairly general behavior of the elastic and poroelastic characteristics of seismic waves in the earth. Thomsen's anisotropy parameters for weak elastic and poroelastic anisotropy are now commonly used in exploration, and can be conveniently expressed in terms of the layer averages of Backus. Since our main interest is usually in the fluids underground, it would be helpful to have a set of general equations relating the Thomsen parameters as directly as possible to the fluid properties. This end can be achieved in a rather straightforward fashion for these layered earth models, and the present paper develops and then discusses these relations. Furthermore, it is found that, although there are five effective shear moduli for any layered VTI medium, one and only one effective shear modulus for the layered system contains all the dependence of pore fluids on the elastic or poroelastic constants that can be observed in vertically polarized shear waves in VTI media. The effects of the pore fluids on this effective shear modulus can be substantial - an increase of shear wave speed on the order of 10% is shown to be possible …

None

In order to have a standard for furnaces that includes electricity consumption or for the efficiency of furnace blowers to be determined, it is necessary to determine the airflow of a furnace or furnace blower. This study focused on airflow testing, in order to determine if an existing test method for measuring blower airflow could be used to measure the airflow of a furnace, under conditions seen in actual installations and to collect data and insights into the operating characteristics of various types of furnace blowers, to use in the analysis of the electricity consumption of furnaces. Results of the measured airflow on furnaces with three types of blower and motor combinations are presented in the report. These included: (1) a forward-curved blower wheel with a typical permanent split capacitor (PSC) motor, (2) a forward-curved blower wheel with an electronically-commutated motor (ECM), and (3) a prototype blower, consisting of a backward-inclined blower wheel matched to an ECM motor prototype, which is being developed as an energy-saving alternative to conventional furnace blowers. The testing provided data on power consumption, static and total pressure, and blower speed.

We discuss commissioning work funded through LCLS WBS element 1.5: X-ray Transport Optics and Diagnostics (XTOD.) A short description of the XTOD commissioning diagnostics hardware is followed by a brief discussion of FEL induced damage considerations. The remainder discusses simulation work on the response of the Direct Imager camera to a mix of spontaneous and FEL radiation and a Monte Carlo Calculation of the reflections of the spontaneous radiation in the undulator vacuum tube.

The first hydrodynamics experiments were performed on the National Ignition Facility. A supersonic jet was formed via the interaction of a laser driven shock ({approx}40 Mbars) with 2D and 3D density perturbations. The temporal evolution of the jet's spatial scales and ejected mass were measured with point projection x-ray radiography. Measurements of the large-scale features and mass are in good agreement with 2D and 3D numerical simulations. These experiments are the first quantitative measurements of the evolution of 3D supersonic jets and provide insight into their 3D behavior.

With the operation of the RHIC heavy ion program, the theoretical understanding of QCD at finite temperature and density has become increasingly important. Though QCD at finite temperature has been extensively studied using lattice Monte-Carlo simulations over the past twenty years, most physical questions relevant for RHIC (and future) heavy ion experiments remain open. In lattice QCD at finite temperature and density there have been at least two major advances in recent years. First, for the first time calculations of real time quantities, like meson spectral functions have become available. Second, the lattice study of the QCD phase diagram and equation of state have been extended to finite baryon density by several groups. Both issues were extensively discussed in the course of the workshop. A real highlight was the study of the QCD phase diagram in (T, {mu})-plane by Z. Fodor and S. Katz and the determination of the critical end-point for the physical value of the pion mass. This was the first time such lattice calculations at, the physical pion mass have been performed. Results by Z Fodor and S. Katz were obtained using a multi-parameter re-weighting method. Other determinations of the critical end point were also presented, in …

Single crystal samples of micron dimensions oriented in the [001] direction were shortened 10 to 40% in uniaxial compression with superposed hydrostatic pressure to begin investigation of how the onset of yielding evolves with pressure. A testing machine based on opposed anvil geometry with precision pneumatic control of the applied force and capability to measure sub micron displacements was developed to produce shape changing deformation at pressure. The experiments extend observations of pressure dependent deformation to {approx}5Gpa at shortening rates of {approx}2*10{sup -4}. Samples have been recovered for post run characterization and analysis to determine if deformation mechanisms are altered by pressure. Experiments under hydrostatic pressure provide insight into the nature of materials under extreme conditions, and also provide a means for altering deformation behavior in a controlled fashion. The approach has a long history demonstrating that pressure enhances ductility in general, and produces enhanced hardening relative to that expected from normal cold work in the BCC metals Mo, Ta and Nb{sup 2}. The pressure hardening is in excess of that predicted from the measured increase in shear modulus at pressure, and therefore is likely due to a dislocation mechanism, such as suppression of kink pair formation or the interaction …

One of the main areas of research in the last two years in this program has been the properties of grain boundaries in perovskite and fluorite structure materials.