A limited, but accurate amount of detailed information about the radioactive isotopes used in the U.S. for medical procedures was collected from a local hospital and from a recent report on the U.S. Radiopharmaceutical Markets. These data included the total number of procedures, the specific types of procedures, the specific radioisotopes used in these procedures, and the dosage administered per procedure. The information from these sources was compiled, assessed, pruned, and then merged into a single, comprehensive and consistent set of results presented in this report. (PIET-43471-TM-197)

Several factors limit the energy savings potential and increase the costs of energy-efficient technologies to consumers. These factors may usefully be placed into two categories; one category is what economists would define as market failures and the other is related to consumer preferences. This paper provides a conceptual framework for understanding the roles of these factors, and develops a methodology to quantify their effects on costs and potentials of two energy efficient end uses - residential lighting and clothes washers. It notes the significant roles played by the high implicit cost of obtaining information about the benefits of the two technologies and the apparent inability to process and utilize information. For compact fluorescent lamps, this report finds a conservative estimate of the cost of conserved energy of 3.1 cents per kWh. For clothes washers, including water savings reduces the cost of conserved energy from 13.6 cents to 4.3 cents per equivalent kWh. Despite these benefits, market share remains low. About 18 million tons of CO2 could be saved cost effectively from 2005 sales of these two technologies alone. The paper also notes that trading of carbon emissions will incur transaction costs that will range from less than 10 cents per …

We validated COG, a 3D Monte Carlo radiation transport code, against experimental data and MNCP4C simulations from the Shielding Integral Benchmark Archive Database (SINBAD) compiled by RSICC. We modeled three experiments: the Osaka Nickel and Aluminum sphere experiments conducted at the OKTAVIAN facility, and the liquid oxygen experiment conducted at the FNS facility. COG results are in good agreement with experimental data and generally within a few % of MCNP results. There are several possible sources of discrepancy between MCNP and COG results: (1) the cross-section database versions are different, MCNP uses ENDFB VI 1.1 while COG uses ENDFB VIR7, (2) the code implementations are different, and (3) the models may differ slightly. We also limited the use of variance reduction methods when running the COG version of the problems.

Lawrence Livermore National Laboratory (LLNL) routinely uses calorimetry and gamma isotopic analyses (Cal/Iso) for the accountability measurement of plutonium (Pu) bearing items. In the past 15 years, the vast majority of those items measured by Cal/Iso were contained in a thin-walled convenience can enclosed in another thin-walled outer container. However, LLNL has recently begun to use DOE-STD-3013-2000 containers as well. These DOE-STD-3013-2000 containers are comprised of a stainless steel convenience can enclosed in welded stainless steel primary and secondary containers. In addition to the fact that the wall thickness of the DOE-STD-3013-2000 containers is much greater than that of other containers in our experience, the DOE-STD-3013-2000 containers appear to have larger thermal insulation characteristics. To date, we have derived Pu-mass values from Cal/Iso measurements of 74 different DOE-STD-3013-2000 containers filled with Pu-bearing oxide or mixed uranium-plutonium (U-Pu) oxide material. Both water-bath and air-bath calorimeters were used for these measurements and both use software to predict when thermal equilibrium is attained. Our experience has shown that after apparent equilibrium has been attained, at least one more complete cycle, and sometimes two or three more complete cycles, is required to gain a measure of true thermal equilibrium. Otherwise, the derived Pu-mass values …

We present one-dimensional (1-D) lipid bilayer structures that integrate carbon nanotubes with a key biological environment-phospholipid membrane. Our structures consist of lipid bilayers wrapped around carbon nanotubes modified with a hydrophilic polymer cushion layer. Despite high bilayer curvature, the lipid membrane maintains its fluidity and can sustain repeated damage-recovery cycles. We also present the first evidence of spontaneous insertion of pore-forming proteins into 1-D lipid bilayers. These structures could lead to the development of new classes of biosensors and bioelectronic devices.

This paper presents a strategy that may be used to guide stabilizing control design for multiple oscillations, which are difficult to control using conventional control design procedures. A multiple oscillation phenomena is observed in an example power system. A local bifurcation and an interarea bifurcation develop in an example power system due to multiple bifurcation parameter variations. The dynamic behaviors of the bifurcating system are complex due to the overlapping of the two different bifurcation subsystems and are shown to be difficult to control. The double bifurcations are studied in this paper and in order to stabilize them, three kind of {mu}-synthesis robust controls are designed, (a) {mu}-synthesis power system stabilizer (MPSS); (b) {mu}-synthesis SVC control (MSVC); and (c) a mixed MPSS/MSVC control. Based on the bifurcation subsystem analysis, the measurement signals and locations of the controls are selected. The control performances of three kind of controls are evaluated and compared. The conclusions are given according to the analysis and time simulation results.

The presence of strong nonlinear absorption has been observed in laser modified fused silica. Intensity-dependent transmission measurements using 355-nm, 532-nm and 1,064-nm laser pulses were performed in pristine polished regions in fused silica substrates and in locations that were exposed to dielectric breakdown. The experimental results suggest that multi-photon absorption is considerably stronger in the modified regions compared to pristine sites and is strongly dependent on the excitation wavelength.

None

Silica-filled polydimethylsiloxane (PDMS) composite systems find a broad range of applications due to their chemical and environmental resilience and the ability to fine tune, through chemical and processing modifications, the chemical and mechanical properties resulting in a precise engineering property for the final component. Thus, requirements for, and life-performance predictions of, these materials require an understanding of the interaction between the silica filler and the polymer network. Because silica surfaces are well known to have a high affinity for water adsorption, and this water is a critical part of the interface between the silica particles and the polymer matrix, water at this interface has important consequences on the nature of the silica-polymer bonding and subsequently the mechanical behaviour. Previous studies have reported on the water speciation and long-term outgassing kinetics of common fumed and precipitated silicas used in silicone elastomers, and of one such copolymer system in particular. Several different water species were observed to be present with a range of desorption activation energies. The amount and type of species present were observed to be dependent on the thermal and chemical history of the filler and the composite. Solid state Nuclear Magnetic Resonance (NMR) methods based on quantification of residual …

The purpose of this report is to summarize 1) associated information and values for key release model parameters (i.e., best estimate, minimum and maximum) obtained where possible from published experimental data, 2) a structure for selection of sensitivity tests cases that can be used to identify test cases, and 3) recommended test cases for selected contaminants of potential concern to assess remedy effectiveness against a no-treatment base case.

We study topological as well as dynamical properties of BPS nonabelian magnetic monopoles of Goddard-Nuyts-Olive-Weinberg type in $ G=SU(N)$, $USp(2N)$ and SO(N) gauge theories, spontaneously broken to nonabelian subgroups $H$. We find that monopoles transform under the group dual to $H$ in a tensor representation of rank determined by the corresponding element in $\pi_1(H)$. When the system is embedded in a $\cal N=2$ supersymmetric theory with an appropriate set of flavors with appropriate bare masses, the BPS monopoles constructed semiclassically persist in the full quantum theory. This result supports the identification of"dual quarks'' found at $r$-vacua of $\cal N=2$ theories with the nonabelian magnetic monopoles. We present several consistency checks of our monopole spectra.

We present a simple superfield Lagrangian for massive supergravity. It comprises the minimal supergravity Lagrangian with interactions as well as mass terms for the metric superfield and the chiral compensator. This is the natural generalization of the Fierz-Pauli Lagrangian for massive gravity which comprises mass terms for the metric and its trace. We show that the on-shell bosonic and fermionic fields are degenerate and have the appropriate spins: 2, 3/2, 3/2 and 1. We then study this interacting Lagrangian using goldstone superfields. We find that achiral multiplet of goldstones gets a kinetic term through mixing, just as the scalar goldstone does in the non-supersymmetric case. This produces Planck scale (Mpl) interactions with matter and all the discontinuities and unitarity bounds associated with massive gravity. In particular, the scale of strong coupling is (Mpl m^4)^1/5, where m is the multiplet's mass. Next, we consider applications of massive supergravity to deconstruction. We estimate various quantum effects which generate non-local operators in theory space. As an example, we show that the single massive supergravity multiplet in a 2-site model can serve the function of an extra dimension in anomaly mediation.

The CPS Accel is a commercial PET camera based on a block detector with 64 LSO scintillator crystals (each 6.75 x 6.75 x 25 mm)read out with 4 photomultiplier tubes. The excellent timing resolution of LSO suggests that this camera might be used for time-of-flight (TOF) PET, thereby reducing the statistical noise significantly. Although the Accel achieves 3 ns coincidence resolution (a factor of two better than BGO-based PET cameras), its timing resolution is nearly an order of magnitude worse than that demonstrated with individual LSO crystals. This paper quantifies the effect on the timing of each component in the Accel timing chain to identify which components most limit the camera's timing resolution. The components in the timing chain are: the scintillator crystal, the photomultiplier tube (PMT), the constant fraction discriminator (CFD), and the time to digital converter (TDC). To measure the contribution of each component, we construct a single crystal test system with high-performance versions of these components. This system achieves 221 ps fwhm coincidence timing resolution, which is used as a baseline measurement. One of the high-performance components is replaced by a production component, the coincidence timing resolution is re-measured, and the difference between measurements is the contribution …

None

GaN/InGaN light emitting diodes (LEDs) are commercialized for lighting applications because of the cost efficient way that they produce light of high brightness. Nevertheless, there is significant room for improving their external emission efficiency from typical values below 10 percent to more than 50 percent, which are obtainable by use of other materials systems that, however, do not cover the visible spectrum. In particular, green-light emitting diodes fall short in this respect, which is troublesome since the human eye is most sensitive in this spectral range. In this letter advanced electron microscopy is used to characterize indium segregation in InGaN quantum wells of high-brightness, green LEDs (with external quantum efficiency as high as 15 percent at 75 A/cm2). Our investigations reveal the presence of 1-3 nm wide indium rich clusters in these devices with indium concentrations as large as 0.30-0.40 that narrow the band gap locally to energies as small as 2.65 eV.

During FY 2001, two arrays, each containing seven neptunium-loaded targets, were irradiated at the Advanced Test Reactor in Idaho to examine the influence of multi-target self-shielding on {sup 236}Pu content and to evaluate fission product release data. One array consisted of seven targets that contained 10 vol% NpO{sub 2} pellets, while the other array consisted of seven targets that contained 20 vol % NpO{sub 2} pellets. The arrays were located in the same irradiation facility but were axially separated to minimize the influence of one array on the other. Each target also contained a dosimeter package, which consisted of a small NpO{sub 2} wire that was inside a vanadium container. After completion of irradiation and shipment back to the Oak Ridge National Laboratory, nine of the targets (four from the 10 vol% array and five from the 20 vol% array) were punctured for pressure measurement and measurement of {sup 85}Kr. These nine targets and the associated dosimeters were then chemically processed to measure the residual neptunium, total plutonium production, {sup 238}Pu production, and {sup 236}Pu concentration at discharge. The amount and isotopic composition of fission products were also measured. This report provides the results of the processing and analysis of …

Coupled ocean-atmosphere general circulation models (coupled GCMs) with interactive sea ice are the primary tool for investigating possible future global warming and numerous other issues in climate science. A long-standing problem with such models is that when different components of the physical climate system are linked together, the simulated climate can drift away from observations unless constrained by ad hoc adjustments to interface fluxes. However, eleven modern coupled GCMs--including three that do not employ flux adjustments--behave much better in this respect than the older generation of models. Surface temperature trends in control run simulations (with external climate forcing such as solar brightness and atmospheric carbon dioxide held constant) are small compared with observed trends, which include 20th century climate change due to both anthropogenic and natural factors. Sea ice changes in the models are dominated by interannual variations. Deep ocean temperature and salinity trends are small enough for model control runs to extend over 1000 simulated years or more, but trends in some regions, most notably the Arctic, are inconsistent among the models and may be problematic.

None

This annual report is prepared pursuant to the National Emission Standards for Hazardous Air Pollutants (NESHAPs; Title 40 Code of Federal Regulations [CFR] Part 61, Subpart H). Subpart H governs radionuclide emissions to air from Department of Energy (DOE) facilities. NESHAPs limits the emission of radionuclides to the ambient air from DOE facilities to levels resulting in an annual effective dose equivalent (EDE) of 10 mrem (100 {micro}Sv) to any member of the public. The EDEs for the Lawrence Livermore National Laboratory (LLNL) site-wide maximally exposed members of the public from operations in 2003 are summarized here. Livermore site: 0.044 mrem (0.44 {micro}Sv) (55% from point-source emissions, 45% from diffuse-source emissions). The point-source emissions include gaseous tritium modeled as tritiated water vapor as directed by EPA Region IX; the resulting dose is used for compliance purposes. Site 300: 0.017 mrem (0.17 {micro}Sv) (98% from point-source emissions, 2% from diffuse-source emissions). The EDEs were calculated using the EPA-approved CAP88-PC air dispersion/dose-assessment model, except for doses for two diffuse sources that were estimated using measured concentrations and dose coefficients. Site specific meteorological data, stack flow data, and emissions estimates based on radionuclide usage inventory data or continuous stack monitoring data were the …

An external gelation process was developed to produce spherical granules that contain metal hydride particles in a sol-gel matrix. Dimensionally stable granules containing metal hydrides are needed for applications such as hydrogen separation and hydrogen purification that require columns containing metal hydrides. Gases must readily flow through the metal hydride beds in the columns. Metal hydrides reversibly absorb and desorb hydrogen and hydrogen isotopes. This is accompanied by significant volume changes that cause the metal hydride to break apart or decrepitate. Repeated cycling results in very fine metal hydride particles that are difficult to handle and contain. Fine particles tend to settle and pack making it more difficult to flow gases through a metal hydride bed. Furthermore, the metal hydrides can exert a significant force on the containment vessel as they expand. These problems associated with metal hydrides can be eliminated with the granulation process described in this report. Small agglomerates of metal hydride particles and abietic acid (a pore former) were produced and dispersed in a colloidal silica/water suspension to form the feed slurry. Fumed silica was added to increase the viscosity of the feed slurry which helped to keep the agglomerates in suspension. Drops of the feed slurry …

We review the recent proposal that neutrinos are light because their masses are proportional to a low scale, f, of lepton flavor symmetry breaking. This mechanism is testable because the resulting pseudo-Goldstone bosons, of mass m_G, couple strongly with the neutrinos, affecting the acoustic oscillations during the eV era of the early universe that generate the peaks in the CMB radiation. Characteristic signals result over a very wide range of (f, m_G) because of a change in the total relativistic energy density and because the neutrinos scatter rather than free-stream. Thermodynamics allows a precise calculation of the signal, so that observations would not only confirm the late-time neutrino mass mechanism, but could also determine whether the neutrino spectrum is degenerate, inverted or hierarchical and whether the neutrinos are Dirac or Majorana. The flavor symmetries could also give light sterile states. If the masses of the sterile neutrinos turn on after the MeV era, the LSND oscillations can be explained without upsetting big bang nucleosynthesis, and, since the sterile states decay to lighter neutrinos and pseudo-Goldstones, without giving too much hot dark matter.

Oxidative alkaline leaching has been proposed to pre-treat the high-level nuclear waste sludges to remove some of the problematic (e.g., Cr) and/or non-radioactive (e.g., Na, Al) constituents before vitrification. It is critical to understand the behavior of actinides, americium and plutonium in particular, in oxidative alkaline leaching. We have studied the leaching behavior of americium from four different sludge simulants (BiPO{sub 4}, BiPO{sub 4 modified}, Redox, PUREX) using potassium permanganate and potassium persulfate in alkaline solutions. Up to 60% of americium sorbed onto the simulants is leached from the sludges by alkaline persulfate and permanganate. The percentage of americium leached increases with [NaOH] (between 1.0 and 5.0 M). The initial rate of americium leaching by potassium persulfate increases in the order BiPO{sub 4} sludge < Redox sludge < PUREX sludge. The data are most consistent with oxidation of Am{sup 3+} in the sludge to either AmO{sub 2}{sup +} or AmO{sub 2}{sup 2+} in solution. Though neither of these species is expected to exhibit long-term stability in solution, the potential for mobilization of americium from sludge samples would have to be accommodated in the design of any oxidative leaching process for real sludge samples.

The potential energy surface corresponding the complex resonance energy of the 2B1 Feshbach resonance state of the water anion is constructed in its full dimensionality. Complex Kohn variational scattering calculations are used to compute the resonance width, while large-scale Configuration Interaction calculations are used to compute the resonance energy. Near the equilibrium geometry, an accompanying ground state potential surface is constructed from Configuration Interaction calculations that treat correlation at a level similar to that used in the calculations on the anion.

The ATLAS Collaboration at CERN is preparing for the data taking and analysis at the LHC that will start in 2007. Therefore, a series of Data Challenges was started in 2002 whose goals are the validation of the Computing Model, of the complete software suite, of the data model, and to ensure the correctness of the technical choices to be made. A major feature of the first Data Challenge was the preparation and the deployment of the software required for the production of large event samples as a worldwide-distributed activity. It should be noted that it was not an option to ''run everything at CERN'' even if we had wanted to; the resources were not available at CERN to carry out the production on a reasonable time-scale. The great challenge of organizing and then carrying out this large-scale production at a significant number of sites around the world had the refore to be faced. However, the benefits of this are manifold: apart from realizing the required computing resources, this exercise created worldwide momentum for ATLAS computing as a whole. This report describes in detail the main steps carried out in DC1 and what has been learned from them as a …