Numerical methods are used to examine dimensional errors in metal structures microfabricated by the LIGA process. These errors result from elastic displacements of the PMMA mold during electrodeposition and arise from thermal expansion of the PMMA when electroforming is performed at elevated temperatures and from PMMA swelling due to absorption of water from aqueous electrolytes. Both numerical solutions and simple analytical approximations describing PMMA displacements for idealized linear and axisymmetric geometries are presented and discussed. We find that such displacements result in tapered metal structures having sidewall slopes up to 14 {micro}m per millimeter of height for linear structures bounded by large areas of PMMA. Tapers for curved structures are of similar magnitude, but these structures are additionally skewed from the vertical. Potential remedies for reducing dimensional errors are also discussed. Here we find that auxiliary moat-like features patterned into the PMMA surrounding mold cavities can reduce taper by an order of magnitude or more. Such moats dramatically reduce tapers for all structures, but increase skew for curved structures when the radius of curvature is comparable to the structure height.

Reflection of a seismic wave from a plane interface betweentwo elastic media does not depend on the frequency. If one of the mediais poroelastic and fluid-saturated, then the reflection becomesfrequency-dependent. This paper presents a low-frequency asymptoticformula for the reflection of seismic plane p-wave from a fluid-saturatedporous medium. The obtained asymptotic scaling of the frequency-dependentcomponent of the reflection coefficient shows that it is asymptoticallyproportional to the square root of the product of the reservoir fluidmobility and the frequency of the signal. The dependence of this scalingon the dynamic Darcy's law relaxation time is investigated as well.Derivation of the main equations of the theory of poroelasticity from thedynamic filtration theory reveals that this relaxation time isproportional to Biot's tortuosity parameter.

The objective of this work was to use a simple compartment model of soil carbon (C) and nitrogen (N) dynamics to predict forest recovery on degraded soils and forest sustainability, following recovery, under different regimes of prescribed fire and timber management. This report describes the model and a model-based analysis of the effect of prescribed burning and forest thinning or clearcutting on stand recovery and sustainability at Fort Benning, GA. I developed the model using Stella{reg_sign} Research Software (High Performance Systems, Inc., Hanover, NH) and parameterized the model using data from field studies at Fort Benning, literature sources, and parameter fitting. The model included (1) a tree biomass submodel that predicted aboveground and belowground tree biomass, (2) a litter production submodel that predicted the dynamics of herbaceous aboveground and belowground biomass, (3) a soil C and N submodel that predicted soil C and N stocks (to a 30 cm soil depth) and net soil N mineralization, and (4) an excess N submodel that calculated the difference between predicted plant N demands and soil N supplies. There was a modeled feedback from potential excess N (PEN) to tree growth such that forest growth was limited under conditions of N deficiency. Two …

The quadratic function approaching method (QFAM) is introduced for magnetotelluric sounding (MT) data inversion. The method takes the advantage of that quadratic function has single extreme value, which avoids leading to an inversion solution for local minimum and ensures the solution for global minimization of an objective function. The method does not need calculation of sensitivity matrix and not require a strict initial earth model. Examples for synthetic data and field measurement data indicate that the proposed inversion method is effective.

The role of soil C dynamics in the exchange of CO{sub 2} between the terrestrial biosphere and the atmosphere is at the center of many science questions related to global climate change. The purpose of this report is to summarize measured trends in environmental factors and ecosystem processes that affect soil C balance along elevation gradients in the southern Appalachian Mountains of eastern Tennessee and western North Carolina, USA. Three environmental factors that have potentially significant effects on soil C dynamics (temperature, precipitation, and soil N availability) vary in a predictable manner with altitude. Forest soil C stocks and calculated turnover times of labile soil C increase with elevation, and there is an apparent inverse relationship between soil C storage and mean annual temperature. Relationships between climate variables and soil C dynamics along elevation gradients must be interpreted with caution because litter chemistry, soil moisture, N availability, and temperature are confounded; all potentially interact in complex ways to regulate soil C storage through effects on decomposition. Some recommendations are presented for untangling these complexities. It is concluded that past studies along elevation gradients have contributed to a better but not complete understanding of environmental factors and processes that potentially affect …

Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful technique for studying bi-molecular interactions at the atomic scale. Our NMR lab is involved in the identification of small molecules, or ligands that bind to target protein receptors, such as tetanus (TeNT) and botulinum (BoNT) neurotoxins, anthrax proteins and HLA-DR10 receptors on non-Hodgkin's lymphoma cancer cells. Once low affinity binders are identified, they can be linked together to produce multidentate synthetic high affinity ligands (SHALs) that have very high specificity for their target protein receptors. An important nanotechnology application for SHALs is their use in the development of robust chemical sensors or biochips for the detection of pathogen proteins in environmental samples or body fluids. Here, we describe a recently developed NMR competition assay based on transferred nuclear Overhauser effect spectroscopy (trNOESY) that enables the identification of sets of ligands that bind to the same site, or a different site, on the surface of TeNT fragment C (TetC) than a known ''marker'' ligand, doxorubicin. Using this assay, we can identify the optimal pairs of ligands to be linked together for creating detection reagents, as well as estimate the relative binding constants for ligands competing for the same site.

More than ten years ago, Sandia managers defined a set of traits and characteristics that were needed for success at Sandia. Today, the Sandia National Laboratories Success Profile Competencies continue to be powerful tools for employee and leadership development. The purpose of this report is to revisit the historical events that led to the creation and adaptation of the competencies and to position them for integration in future employee selection, development, and succession planning processes. This report contains an account of how the competencies were developed, testimonies of how they are used within the organization, and a description of how they will be foundational elements of new processes.

This research was conducted to investigate the feasibility of applying microbial biodegradation as a treatment technology for wastes containing radioactive elements and organic solvents (mixed wastes). In this study, we focused our efforts on the treatment of wastes generated by biomedical research as the result of purifying tritium labeled compounds by high-performance liquid chromatography (HPLC). These wastes are typically 80 percent water with 20 percent acetonitrile or methanol or a mixture of both. The objective was to determine the potential of using biodegradation to treat the solvent component of tritiated mixed waste to a concentration below the land disposal restriction standard (1mg/L for acetonitrile). Once the standard is reached, the remaining radioactive waste is no longer classified as a mixed waste and it can then be solidified and placed in a secure landfill. This investigation focused on treating a 10 percent acetonitrile solution, which was used as a non-radioactive surrogate for HPLC waste, in a bioreactor. The results indicated that the biodegradation process could treat this solution down to less than 1 mg/L to meet the land disposal restriction standard.

The Metals Processing Laboratory Users Facility (MPLUS) is a Department of Energy (DOE), Energy Efficiency and Renewable Energy, Industrial Technologies Program, user facility designated to assist researchers in key industries, universities, and federal laboratories in improving energy efficiency, improving environmental aspects, and increasing competitiveness. The goal of MPLUS is to provide access to the specialized technical expertise and equipment needed to solve metals processing issues that limit the development and implementation of emerging metals processing technologies. The scope of work can also extend to other types of materials. MPLUS has four primary user centers: (1) Processing--casting, powder metallurgy, deformation processing (including extrusion, forging, rolling), melting, thermomechanical processing, and high-density infrared processing; (2) Joining--welding, monitoring and control, solidification, brazing, and bonding; (3) Characterization--corrosion, mechanical properties, fracture mechanics, microstructure, nondestructive examination, computer-controlled dilatometry, and emissivity; and (4) Materials/Process Modeling--mathematical design and analyses, high-performance computing, process modeling, solidification/deformation, microstructure evolution, thermodynamic and kinetic, and materials databases A fully integrated approach provides researchers with unique opportunities to address technologically related issues to solve metals processing problems and probe new technologies. Access is also available to 16 additional Oak Ridge National Laboratory (ORNL) user facilities ranging from state-of-the-art materials characterization capabilities, and high-performance computing to …

This post-closure inspection report provides documentation of the semiannual inspection activities, maintenance and repair activities, and conclusions and recommendations for calendar year 2003 for eight corrective action units located on the Tonopah Test Range, Nevada.

None

This report documents results from a study carried out by Oak Ridge National Laboratory and the University of Tennessee at Knoxville for the Office of Public Transportation, Tennessee Department of Transportation. The study team was tasked with developing a process and a supporting methodology for estimating the benefits accruing to the State from the operation of state supported public transit services. The team was also tasked with developing forecasts of the future demands for these State supported transit services at five year intervals through the year 2020, broken down where possible to the local transit system level. Separate ridership benefits and forecasts were also requested for the State's urban and rural transit operations. Tennessee's public transit systems are subsidized to a degree by taxpayers. It is therefore in the public interest that assessments of the benefits of such systems be carried out at intervals, to determine how they are contributing to the well-being of the state's population. For some population groups within the State of Tennessee these transit services have become essential as a means of gaining access to workplaces and job training centers, to educational and health care facilities, as well as to shops, social functions and recreational sites.

Deep x-ray lithography in combination with electroforming is capable of producing high precision metal parts in small lot series. This study deals with a high aspect ratio structure with overall dimensions on the order of 10 mm x 7 mm x 1.5 mm, with the smallest line width being 150 {micro}m. The lateral deviation from the design is to be kept to a minimum, preferably below 5 {micro}m. To ensure adequate quality control, a semi-automated metrology technique has been established to measure all parts. While the paper will give a brief overview of all involved techniques, it focuses on the method to measure the top and bottom of the parts and the top of geometries following the process. The instrument used is a View Engineering Voyager V6x12 microscope, which is fully programmable. The microscope allows direct measurement of geometries but also is capable of saving all captured data as point clouds. These point clouds play a central role when evaluating part geometry. After measuring the part, the point cloud is compared to the computer aided design (CAD) contour of the part, using a commercially available software package. The challenge of proper edge lighting on a nickel alloy part is evaluated …

We review the phase diagram of nitrogen in a wide pressure and temperature range. Recent optical and x-ray diffraction studies at pressures up to 300 GPa and temperatures in excess of 1000 K have provided a wealth of information on the transformation of molecular nitrogen to a nonmolecular (polymeric) semiconducting and two new molecular phases. These newly found phases have very large stability (metastability) range. Moreover, two new molecular phases have considerably different orientational order from the previously known phases. In the iota phase (unlike most of other known molecular phases), N{sub 2} molecules are orientationally equivalent. The nitrogen molecules in the theta phase might be associated into larger aggregates, which is in line with theoretical predictions on polyatomic nitrogen.

The objective is to assist the Department of Energy in the development of a low cost, reliable and high performance air compressor/expander. Technical Objective 1: Perform a turbocompressor systems PEM fuel cell trade study to determine the enhanced turbocompressor approach. Technical Objective 2: Using the results from technical objective 1, an enhanced turbocompressor will be fabricated. The design may be modified to match the flow requirements of a selected fuel cell system developer. Technical Objective 3: Design a cost and performance enhanced compact motor and motor controller. Technical Objective 4: Turbocompressor/motor controller development.

We have studied the focusing properties of two highly oriented pyrolitic graphite (HOPG) spectrometers, which differ in the degree of the mosaic spread: ZYA with a low mosaic spread ({gamma}=0.4 degrees) and ZYH with a large mosaic spread ({gamma}=3.5 degrees). In order to assess the crystal performance for a variety of different experiments, various K{alpha} and K{beta} x-ray lines have been produced using a high-intensity ({approx}>10{sup 17} W/cm{sup 2}) short-pulse ({approx} 100 fs) laser beam focused onto Ti, V, Zn, and Cu foils. The measured spectral resolution of the HOPG crystals in both first and second order diffraction has been compared with theoretical predictions. Using known values for the peak reflectivity of HOPG crystals, we have also computed K{alpha} x-ray conversion efficiencies of Ti, V, Zn, and Cu. These results are important to estimate the optimal conditions under which different types of HOPG monochromators can be used for the detection of weak x-ray signals as the one encountered in x-ray Thomson/Compton scattering experiments.

Under the sponsorship of the U.S. DOE and DHS, we have developed a CFD model for simulating flow and dispersion of chemical and biological agents released in the urban environment. Our model, FEM3MP (Chan and Stevens, 2000), is based on solving the three-dimensional, time-dependent, incompressible Navier-Stokes equations on massively parallel computer platforms. The model uses the finite element method for accurate representation of complex building shapes and variable terrain, together with a semi-implicit projection method and modern iterative solvers for efficient time integration (Gresho and Chan, 1998). Physical processes treated include turbulence modeling via the RANS (Reynolds Averaged Navier-Stokes) and LES (Large Eddy Simulation) approaches, atmospheric stability, aerosols, UV radiation decay, surface energy budget, and vegetative canopies, etc. Predictions from our model are continuously being verified and validated against data from wind tunnel (Chan and Stevens, 2000; Chan, et al., 2001) and field experiments (Chan, et al., 2002, 2003; Lee, et al., 2002; Humphreys, et al., 2003; and Calhoun, et al., 2004). Discussed below are several examples to illustrate the use of FEM3MP in simulating flow and dispersion in urban areas and forest canopies, with model results compared against available field measurements.

We have measured the polarization of the heliumlike sulfur resonance line 1s2p {sup 1}P{sub 1} {yields} 1s{sup 2} {sup 1}S{sub 0}, and of the blend of the lithiumlike sulfur resonance lines 1s2s2p {sup 2}P{sub 3/2} {yields} 1s{sup 2}2s {sup 2}S{sub 1/2} and 1s2s2p {sup 2}P{sub 1/2} {yields} 1s{sup 2}2s {sup 2}S{sub 1/2} as a function of electron beam energy from near threshold to 144 keV. These lines were excited with the LLNL high-energy electron beam ion trap and measured using a newly modified two-crystal technique. Our results test polarization predictions in an energy regime where few empirical results have been reported. We also present calculations of the polarization using two different methods, and good agreement is obtained.

None

Using a data set of 158 and 169 pb{sup -1} of D0 Run-II data in the electron and muon plus jets channel, respectively, the top quark mass has been measured using the Matrix Element Method. The method and its implementation are described. Its performance is studied in Monte Carlo using ensemble tests and the method is applied to the Moriond 2004 data set.

DOE's State Energy Program published this case study in conjunction with the New Mexico Division of Energy Conservation and Management. It describes an emerging corridor of service stations selling a specific alternative fuel-E85 ethanol-along highways in New Mexico.

The theory that describes the fundamental particle interactions is called the Standard Model, which is a gauge field theory that comprises the Glashow-Weinberg-Salam model [1, 2, 3] of the weak and electromagnetic interactions and quantum chromodynamics (QCD) [4, 5, 6], the theory of the strong interactions. The discovery of the W [7, 8] and Z [9, 10] bosons in 1983 by the UA1 and UA2 collaborations at the CERN p{bar p} collider provided a direct confirmation of the unification of the weak and electromagnetic interactions. Since then, many experiments have refined our understanding of the characteristics of the W and Z bosons.

The X-ray Spectrometer (XRS) instrument is a revolutionary non-dispersive spectrometer that will form the basis for the Astro-E2 observatory to be launched in 2005. We have recently installed a flight spare XRS microcalorimeter spectrometer at the EBIT-I and SuperEBIT facility at LLNL replacing the XRS from the earlier Astro-E mission and providing twice the resolving power. The XRS microcalorimeter is an x-ray detector that senses the heat deposited by the incident photon. It achieves a high energy resolution by operating at 0.06K and by carefully engineering the heat capacity and thermal conductance. The XRS/EBIT instrument has 32 pixels in a square geometry and achieves an energy resolution of 6 eV at 6 keV, with a bandpass from 0.1 to 12 keV (or more at higher operating temperature). The instrument allows detailed studies of the x-ray line emission of laboratory plasmas. The XRS/EBIT also provides an extensive calibration 'library' for the Astro-E2 observatory.

A number of recent works have established the mortar technique as an accurate and robust spatial discretization method for contact problems in computational solid mechanics. Since methods based on this idea rely on an integral, non-local representation of the contact operators, their formulation is somewhat more involved than is true for more traditional ''point to surface'' contact algorithms; in particular, the integral projections have nontrivial linearizations in the fully large deformation context. In this work, we concentrate on another aspect of formulations of this type--definition and implementation of frictional contact operators within the mortar contact framework. Issues associated with frame indifference of frictional tractions and kinematics are discussed, and a numerical demonstration of the technique is given.