Annual report of compiled data regarding student retention in Texas public schools, broken down by grade levels, various demographic criteria, and participation in special programs, as well as information regarding data collection and analysis.

This report presents a set of metadata elements for web archiving.

A 2005 budget draft for the Texas Daily Newspaper Association. The document breaks down the expected income and expenses of the association for the 2005 year.

The objective of this report is: (1) Provide guidance to industry in the reduction of aerodynamic drag of heavy truck vehicles; and (2) Establish a database of experimental, computational, and conceptual design information, and demonstrate potential of new drag-reduction devices. The approaches used were: (1) Develop and demonstrate the ability to simulate and analyze aerodynamic flow around heavy truck vehicles using existing and advanced computational fluid dynamics (CFD) tools; (2) Through an extensive experimental effort, generate an experimental data base for code validation; (3) Using experimental data base, validate computations; (4) Provide industry with design guidance and insight into flow phenomena from experiments and computations; and (5) Investigate aero devices (e.g., base flaps, tractor-trailer gap stabilizer, underbody skirts and wedges, blowing and acoustic devices), provide industry with conceptual designs of drag reducing devices, and demonstrate the full-scale fuel economy potential of these devices.

Miranda is a high order hydrodynamics code for computing fluid instabilities and turbulent mixing. It employs FFTs and band-diagonal matrix solvers for computing spectrally-accurate derivatives, combined with high-order integration methods for time advancement; e.g., fourth-order Runge-Kutta. Fluid properties, i.e., viscosity, diffusivity and thermal conductivity, are computed from kinetic theory. The code contains solvers for both compressible and incompressible flows. It has been used primarily for studying Rayleigh-Taylor (R-T) and Richtmyer-Meshkov (R-M) instabilities, which occur in supernovae and Inertial Confinement Fusion (ICF).

It is important for us to obtain the information of energy spread vs. time in a Booster cycle via the same beam event, for the purpose of minimizing the error caused by the cycle-to-cycle fluctuation. The bunch length (BL) can be extracted from the resistive wall signal (RWS) at different times of a Booster cycle, and from which the energy spread can be estimated.

The Strategic Environmental Research and Development Program (SERDP) issued a statement of need for FY01 titled Statistical Sampling for Unexploded Ordnance (UXO) Site Characterization that solicited proposals to develop statistically valid sampling protocols for cost-effective, practical, and reliable investigation of sites contaminated with UXO; protocols that could be validated through subsequent field demonstrations. The SERDP goal was the development of a sampling strategy for which a fraction of the site is initially surveyed by geophysical detectors to confidently identify clean areas and subsections (target areas, TAs) that had elevated densities of anomalous geophysical detector readings that could indicate the presence of UXO. More detailed surveys could then be conducted to search the identified TAs for UXO. SERDP funded three projects: those proposed by the Pacific Northwest National Laboratory (PNNL) (SERDP Project No. UXO 1199), Sandia National Laboratory (SNL), and Oak Ridge National Laboratory (ORNL). The projects were closely coordinated to minimize duplication of effort and facilitate use of shared algorithms where feasible. This final report for PNNL Project 1199 describes the methods developed by PNNL to address SERDP's statement-of-need for the development of statistically-based geophysical survey methods for sites where 100% surveys are unattainable or cost prohibitive.

The second axis of the DARHT flash X-ray facility at Los Alamos National Laboratory (''DARHT-II'') is a multiple-pulse, 18.4 MeV, 2 kA induction electron linear accelerator [1]. A train of short ({approx}50 ns) pulses are converted via bremsstrahlung to X-rays, which are then used to make radiographic images at various times (nominally four) during a ''hydrotest'' experiment. The train of pulses is created by carving them out of a two microsecond long macropulse, using a fast switching element called a kicker [2]. The unused portion of the macropulse is absorbed in a beam dump. Thus, upstream of the kicker, two microseconds of beam are transported through a vacuum system roughly sixty meters long. These conditions involve length and, specifically, time scales which are new to the transport of high-current beams. A concern under such conditions are the macroscopic interactions between the electron beam and positive ions created by impact ionization of the residual gas in the vacuum system. Over two microseconds, the ion density can develop to a hundredth or even a tenth of a percent of the beam density--small, to be sure, but large enough to have cumulative effects over such a long transport distance. Two such effects will …

Several peptide libraries containing up to 2 million unique peptide ligands have been synthesized. The peptides are attached onto a 80 micron resin and the length of these peptide ligands ranges from 5 to 9 amino acid residues. Using a novel calorimetric assay, the libraries were screened for binding to the ganglioside-binding domain of Clostridium Tetanus Toxin, a structural similar analog of the Clostridium Botulinum toxin. Several binding peptide sequences were identified, in which the detailed binding kinetics are currently underway using the Surface Plasmon Resonance (SPR) technique.

In response to concerns expressed by the California Legislature and the citizenry of the State of California, the State Water Resources Control Board (SWRCB), implemented a program to assess groundwater quality, and provide a predictive capability for identifying areas that are vulnerable to contamination. The program was initiated in response to concern over public supply well closures due to contamination by chemicals such as MTBE from gasoline, and solvents from industrial operations. As a result of this increased awareness regarding groundwater quality, the Supplemental Report of the 1999 Budget Act mandated the SWRCB to develop a comprehensive ambient groundwater-monitoring plan, and led to the initiation of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The primary objective of the GAMA Program is to assess the water quality and to predict the relative susceptibility to contamination of groundwater resources throughout the state of California. Under the GAMA program, scientists from Lawrence Livermore National Laboratory (LLNL) collaborate with the SWRCB, the U.S. Geological Survey (USGS), the California Department of Health Services (DHS), and the California Department of Water Resources (DWR) to implement this groundwater assessment program. In 2003, LLNL carried out this vulnerability study in the groundwater basin that underlies Bakersfield, in …

The goal of the Strategies for Energy Efficiency in Remodeling (SEER) project is to provide information, based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance. Opportunities to include energy efficiency often arise while undertaking general remodeling work. This case study report examines the technologies, methods, and installation of specific energy efficiency strategies. The information presented here stems from a ''gut rehab'' of a house in rural New Jersey as part of the SEER project through the Building America Existing Buildings Program.

The Hanford Site in southeastern Washington State has been used extensively to produce nuclear materials for the U. S. strategic defense arsenal by the U. S. Department of Energy (DOE). A large inventory of radioactive and mixed waste has accumulated in 177 single- and double-shell tanks. Liquid waste recovered from the tanks will be pre-treated to separate the low-activity fraction from the high-level and transuranic wastes. Currently, the DOE Office of River Protection (ORP) is evaluating several options for immobilization of low-activity tank wastes for eventual disposal in a shallow subsurface facility at the Hanford Site. A significant portion of the waste will be converted into immobilized low-activity waste (ILAW) glass with a conventional Joule-heated ceramic melter. In addition to ILAW glass, supplemental treatment technologies are under consideration by the DOE to treat a portion of the low activity waste. The reason for using this alternative treatment technology is to accelerate the overall cleanup mission at the Hanford site. The ORP selected Bulk Vitrification (BV) for further development and testing. Work in FY03 on engineered and large scale tests of the BV process suggested that approximately 0.3 to as much as 3 wt% of the waste stream 99Tc inventory would …

A Wolter X-ray optic was the central component of the microscope envisioned to fulfill the imaging requirements of the Characterization SI. After encountering many difficulties and delays, an optic was finally produced that, unfortunately, only partially met its specifications. With the SI halted, and efforts underway to reformulate a LDRD program to support fabrication of X-ray optics, it is useful to examine the previous effort and compile a list of lessons learned during the research.

Siloxanes have a wide variety of applications throughout the aerospace industry which take advantage of their exceptional insulating and adhesive properties and general resilience. They also offer a wide range of tailorable engineering properties with changes in composition and filler content. They are, however, subject to degradation in radiatively and thermally harsh environments. We are using solid state nuclear magnetic resonance techniques to investigate changes in network and interfacial structure in siloxane elastomers and their correlations to changes in engineering performance in a series of degraded materials. NMR parameters such as transverse ( T{sub 2}) relaxation times, cross relaxation rates, and residual dipolar coupling constants provide excellent probes of changes crosslink density and motional dynamics of the polymers caused by multi-mechanism degradation. The results of NMR studies on aged siloxanes are being used in conjunction with other mechanical tests to provide insight into component failure and degradation kinetics necessary for preliminary lifetime assessments of these materials as well as into the structure-property relationships of the polymers. NMR and MRI results obtained both from high resolution NMR spectrometers as well as low resolution benchtop NMR screening tools will be presented.

In an effort to develop a QA/QC protocol to be used in the development of new pads, we are employing a tabletop unilateral NMR relaxometer called the NMR MOUSE (MObile Universal Surface Explorer). Model materials of varying crosslink density first demonstrated the applicability of the method. Analysis of deformed pads returned from service has been shown to be clearly distinguishable by the NMR MOUSE. Finally, we have quantified the variables associated with taking the relevant measurements and believe that the NMR MOUSE is a viable production and surveillance tool for screening of future DC745 parts.

The International Muon Ionization Cooling Experiment (MICE) is devoted to a study of a muon cooling channel capable of giving the desired performance for a Neutrino Factory. One of the goals is achieving an absolute accuracy of measurements of emittance reduction as high as {+-} 0.1%. The paper describes results of a Monte Carlo study on allowed density variations of liquid hydrogen corresponding to the desired accuracy of the measurements.

The long-term prospects for fully exploring three-flavor mixing in the neutrino sector depend upon an ongoing and increased investment in the appropriate accelerator R&D. Two new concepts have been proposed that would revolutionize neutrino experiments, namely the Neutrino Factory and the Beta Beam facility. These new facilities would dramatically improve our ability to test the three-flavor mixing framework, measure CP violation in the lepton sector, and perhaps determine the neutrino mass hierarchy, and, if necessary, probe extremely small values of the mixing angle {theta}{sub 13}. The stunning sensitivity that could be achieved with a Neutrino Factory is described, together with our present understanding of the corresponding sensitivity that might be achieved with a Beta Beam facility. In the Beta Beam case, additional study is required to better understand the optimum Beta Beam energy, and the achievable sensitivity. Neither a Neutrino Factory nor a Beta Beam facility could be built without significant R&D. An impressive Neutrino Factory R&D effort has been ongoing in the U.S. and elsewhere over the last few years and significant progress has been made towards optimizing the design, developing and testing the required accelerator components, and significantly reducing the cost. The recent progress is described here.

None

We have developed a set of modeled nuclear reaction cross sections for use in radiochemical diagnostics. Systematics for the input parameters required by the Hauser-Feshbach statistical model were developed and used to calculate neutron and proton induced nuclear reaction cross sections in the mass region of samarium, europium and gadolinium (62 {le} Z {le} 64, 82 {le} N {le} 96).

This ICN documents the installation of two additional downgradient monitoring wells and two additional upgradient wells. It updates the monitoring network. The project scientist will provide a schedule change request providing the list of additional wells to the sample scheduler.

The injector of the Flash X-Ray (FXR) accelerator has a significantly larger than expected beam emittance. A computer modeling effort involving three different injector design codes was undertaken to characterize the FXR injector and determine the cause of the large emittance. There were some variations between the codes, but in general the simulations were consistent and pointed towards a much smaller normalized, rms emittance (36 cm-mr) than what was measured (193 cm-mr) at the exit of the injector using a pepperpot technique. The simulations also indicated that the present diode design was robust with respect to perturbations to the nominal design. Easily detected mechanical alignment/position errors and magnet errors did not lead to appreciable increase in the simulated emittance. The physics of electron emission was not modeled by any of the codes and could be the source of increased emittance. The nominal simulation assumed uniform Child-Langmuir Law emission from the velvet cathode and no shroud emission. Simulations that looked at extreme non-uniform cathode and shroud emission scenarios resulted in doubling of the emittance. An alternative approach was to question the pepperpot measurement. Simulations of the measurement showed that the pepperpot aperture foil could double the emittance with respect to the …

We have developed a set of modeled nuclear reaction cross sections for use in radiochemical diagnostics. Local systematics for the input parameters required by the Hauser-Feshbach statistical model were developed and used to calculate neutron and proton induced nuclear reaction cross sections in the mass region of scandium, titanium, vanadium, chromium, manganese, and iron (21 {le} Z {le} 26, 20 {le} N {le} 32).

The performance of four streak tubes in six streak camera configurations is reported. Evaluations were made as part of a search for a streak tube to replace the obsolete RCA C73435 used in the ICF Program's optical streak cameras. Characteristics measured include linearity, spatial and temporal resolution, line-spread function, contrast transfer ratio (CTR), and dynamic range. Tubes evaluated are the RCA C73435, Photonis P510, Photek ST-Y, and Hamamatsu N8059. The RCA C73435 was evaluated in three camera configurations: large format CCD coupled directly to the streak tube, CCD directly coupled to an image intensifier tube (IIT), and the original configuration with a smaller CCD lens coupled to the IIT output. The Photonis and Photek tubes were characterized in configurations where they were directly coupled to large format CCDs. Optimum spatial resolution is achieved when the IIT is removed. Maximum dynamic range requires a configuration where a single photoelectron from the photocathode produces a signal that is {approx}5 times the CCD read noise. The Photonis P510 tube with the E2V CCD forms a well-optimized streak camera system.

None