The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Current velocity in rearing vessels had little if any effect on reproductive behavior of captively reared steelhead. However, males and females reared in high velocity vessels participated a greater number of spawning events than siblings reared in low velocity tanks. Observations of nesting females and associated males in a natural stream (Hamma Hamma River) were consistent with those observed in a controlled spawning channel. DNA pedigree analyses did not reveal significant differences in the numbers of fry produced by steelhead reared in high and low velocity vessels. To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon are being exposed to known odorants at key developmental stages. Subsequently they will be tested for development of long-term memories of these odorants. In 2002-2003, the efficacy of EOG analysis for assessing imprinting was demonstrated and will be applied in these and other behavioral and molecular tools in …

Hydropower development within the Columbia and Snake River Basins has significantly affected riparian, riverine, and adjacent upland habitats and the fish and wildlife species dependent upon them. Hydroelectric dams played a major role in the extinction or major loss of both anadromous and resident salmonid populations and altered instream and adjacent upland habitats, water quality, and riparian/riverine function. Hydroelectric facility construction and inundation directly affected fish and wildlife species and habitats. Secondary and tertiary impacts including road construction, urban development, irrigation, and conversion of native habitats to agriculture, due in part to the availability of irrigation water, continue to affect wildlife and fish populations throughout the Columbia and Snake River Basins. Fluctuating water levels resulting from facility operations have created exposed sand, cobble, and/or rock zones. These zones are generally devoid of vegetation with little opportunity to re-establish riparian plant communities. To address the habitat and wildlife losses, the United States Congress in 1980 passed the Pacific Northwest Electric Power Planning and Conservation Act (Act) (P.L. 96-501), which authorized the states of Idaho, Montana, Oregon, and Washington to create the Northwest Power Planning Council (Council). The Act directed the Council to prepare a program in conjunction with federal, state, and …

Fisheries co-managers of U.S. v Oregon supported and directed the construction and operation of acclimation and release facilities for Snake River fall Chinook from Lyons Ferry Hatchery at three sites above Lower Granite Dam. In 1996, Congress instructed the U.S. Army Corps of Engineers (USCOE) to construct, under the Lower Snake River Compensation Plan (LSRCP), final rearing and acclimation facilities for fall Chinook in the Snake River basin to complement their activities and efforts in compensating for fish lost due to construction of the lower Snake River dams. The Nez Perce Tribe (NPT) played a key role in securing funding and selecting acclimation sites, then assumed responsibility for operation and maintenance of the facilities. In 1997, Bonneville Power Administrative (BPA) was directed to fund operations and maintenance (O&M) for the facilities. Two acclimation facilities, Captain John Rapids and Pittsburg Landing, are located on the Snake River between Asotin, WA and Hells Canyon Dam and one facility, Big Canyon, is located on the Clearwater River at Peck. The Capt. John Rapids facility is a single pond while the Pittsburg Landing and Big Canyon sites consist of portable fish rearing tanks assembled and disassembled each year. Acclimation of 450,000 yearling smolts (150,000 …

This report is a guide to one of the 13 regular appropriations bills that Congress considers each year, related to energy and water development. It is designed to supplement the information provided by the House and Senate Appropriations Subcommittees on Energy and Water Development. It summarizes the status of the bill, its scope, major issues, funding levels, and related congressional activity, and is updated as events warrant.

This report explores issues related to the archiving of Web Browser Plug-ins.

This report describes the results of research targeting improvements in the robustness of message transport in wireless ad hoc networks. The first section of the report provides an analysis of throughput and latency in the wireless medium access control (MAC) layer and relates the analysis to the commonly used 802.11 protocol. The second section describes enhancements made to several existing models of wireless MAC and ad hoc routing protocols; the models were used in support of the work described in the following section. The third section of the report presents a lightweight transport layer protocol that is superior to TCP for use in wireless networks. In addition, it introduces techniques that improve the performance of any ad hoc source routing protocol. The fourth section presents a novel, highly scalable ad hoc routing protocol that is based on geographic principles but requires no localization hardware.

The Idaho National Engineering and Environmental Laboratory (INEEL) is deactivating several fuel storage basins. Airborne contamination is a concern when the sides of the basins are exposed and allowed to dry during water removal. One way of controlling this airborne contamination is to fix the contamination in place while the pool walls are still submerged. There are many underwater coatings available on the market that are used in marine, naval and other applications. A series of tests were run to determine whether the candidate underwater fixatives are easily applied and adhere well to the substrates (pool wall materials) found in INEEL fuel pools. The four pools considered included (1) Test Area North (TAN-607) with epoxy painted concrete walls; (2) Idaho Nuclear Technology and Engineering Center (INTEC) (CPP-603) with bare concrete walls; (3) Materials Test Reactor (MTR) Canal with stainless steel lined concrete walls; and (4) Power Burst Facility (PBF-620) with stainless steel lined concrete walls on the bottom and epoxy painted carbon steel lined walls on the upper portions. Therefore, the four materials chosen for testing included bare concrete, epoxy painted concrete, epoxy painted carbon steel, and stainless steel. The typical water temperature of the pools varies from 55 F …

Motivated by observations about job runtimes on the CPlant system, we use a trace-driven microsimulator to begin characterizing the performance of different classes of allocation algorithms on jobs with different communication patterns in space-shared parallel systems with mesh topology. We show that relative performance varies considerably with communication pattern. The Paging strategy using the Hilbert space-filling curve and the Best Fit heuristic performed best across several communication patterns.

Biological systems create proteins that perform tasks more efficiently and precisely than conventional chemicals. For example, many plants and animals produce proteins to control the freezing of water. Biological antifreeze proteins (AFPs) inhibit the solidification process, even below the freezing point. These molecules bond to specific sites at the ice/water interface and are theorized to suppress solidification chemically or geometrically. In this project, we investigated the theoretical and experimental data on AFPs and performed analyses to understand the unique physics of AFPs. The experimental literature was analyzed to determine chemical mechanisms and effects of protein bonding at ice surfaces, specifically thermodynamic freezing point depression, suppression of ice nucleation, decrease in dendrite growth kinetics, solute drag on the moving solid/liquid interface, and stearic pinning of the ice interface. Stearic pinning was found to be the most likely candidate to explain experimental results, including freezing point depression, growth morphologies, and thermal hysteresis. A new stearic pinning model was developed and applied to AFPs, with excellent quantitative results. Understanding biological antifreeze mechanisms could enable important medical and engineering applications, but considerable future work will be necessary.

A play portfolio is being constructed for the Permian Basin in west Texas and southeast New Mexico, the largest onshore petroleum-producing basin in the United States. Approximately 1,300 reservoirs in the Permian Basin have been identified as having cumulative production greater than 1 MMbbl (1.59 x 10{sup 5} m{sup 3}) of oil through 2000. Of these significant-sized reservoirs, approximately 1,000 are in Texas and 300 in New Mexico. There are 32 geologic plays that have been defined for Permian Basin oil reservoirs, and each of the 1,300 major reservoirs was assigned to a play. The reservoirs were mapped and compiled in a Geographic Information System (GIS) by play. The final reservoir shapefile for each play contains the geographic location of each reservoir. Associated reservoir information within the linked data tables includes RRC reservoir number and district (Texas only), official field and reservoir name, year reservoir was discovered, depth to top of the reservoir, production in 2000, and cumulative production through 2000. Some tables also list subplays. Play boundaries were drawn for each play; the boundaries include areas where fields in that play occur but are smaller than 1 MMbbl (1.59 x 10{sup 5} m{sup 3}) of cumulative production. Oil production …

This SAND report provides the technical progress through October 2003 of the Sandia-led project, 'Carbon Sequestration in Synechococcus Sp.: From Molecular Machines to Hierarchical Modeling,' funded by the DOE Office of Science Genomes to Life Program. Understanding, predicting, and perhaps manipulating carbon fixation in the oceans has long been a major focus of biological oceanography and has more recently been of interest to a broader audience of scientists and policy makers. It is clear that the oceanic sinks and sources of CO2 are important terms in the global environmental response to anthropogenic atmospheric inputs of CO2 and that oceanic microorganisms play a key role in this response. However, the relationship between this global phenomenon and the biochemical mechanisms of carbon fixation in these microorganisms is poorly understood. In this project, we will investigate the carbon sequestration behavior of Synechococcus Sp., an abundant marine cyanobacteria known to be important to environmental responses to carbon dioxide levels, through experimental and computational methods. This project is a combined experimental and computational effort with emphasis on developing and applying new computational tools and methods. Our experimental effort will provide the biology and data to drive the computational efforts and include significant investment in developing …

Conversion of Idaho National Engineering and Environmental Laboratory radioactive sodium-bearing waste into a single solid waste form by evaporation was demonstrated in both flask-scale and pilot-scale agitated thin film evaporator tests. A sodium-bearing waste simulant was adjusted to represent an evaporator feed in which the acid from the distillate is concentrated, neutralized, and recycled back through the evaporator. The advantage to this flowsheet is that a single remote-handled transuranic waste form is produced in the evaporator bottoms without the generation of any low-level mixed secondary waste. However, use of a recycle flowsheet in sodium-bearing waste evaporation results in a 50% increase in remote-handled transuranic volume in comparison to a non-recycle flowsheet.

Analytical and numerical methods are used to examine photoelectron doses and their effect on the dimensions of features produced by deep x-ray lithography. New analytical models describing electron doses are presented and used to compute dose distributions for several feature geometries. The history of development and final feature dimensions are also computed, taking into account the dose field, dissolution kinetics based on measured development rates, and the transport of PMMA fragments away from the dissolution front. We find that sidewall offsets, sidewall slope and producible feature sizes all exhibit at least practical minima and that these minima represent fundamental limitations of the LIGA process. The minimum values under optimum conditions are insensitive to the synchrotron spectrum, but depend strongly on resist thickness. This dependence on thickness is well approximated by simple analytical expressions describing the minimum offset, minimum sidewall slope, minimum producible size of positive and negative features, maximum aspect ratio and minimum radius of inside and outside corners.

For the period of the 8th reporting period high-impact control technologies were identified during the meeting at Cooper in Oklahoma City. The technologies that were identified will be tested on the Ajax DP-115 engine and are capable of being widely utilized by the E&P industry. Two major areas where engine controls and ignition systems, but still included were other alternatives to reduce emissions. The most exhilarating item for this quarter was when Ajax engine was delivered to the test bed at the NGML.

The Seldon software toolkit combines concepts from agent-based modeling and social science to create a computationally social dynamic model for group recruitment. The underlying recruitment model is based on a unique three-level hybrid agent-based architecture that contains simple agents (level one), abstract agents (level two), and cognitive agents (level three). This uniqueness of this architecture begins with abstract agents that permit the model to include social concepts (gang) or institutional concepts (school) into a typical software simulation environment. The future addition of cognitive agents to the recruitment model will provide a unique entity that does not exist in any agent-based modeling toolkits to date. We use social networks to provide an integrated mesh within and between the different levels. This Java based toolkit is used to analyze different social concepts based on initialization input from the user. The input alters a set of parameters used to influence the values associated with the simple agents, abstract agents, and the interactions (simple agent-simple agent or simple agent-abstract agent) between these entities. The results of phase-1 Seldon toolkit provide insight into how certain social concepts apply to different scenario development for inner city gang recruitment.

This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

None

During the fourth reporting period, the project team investigated the Non-Selective Catalytic Reduction technologies that are in use on rich-burn four-stroke cycle engines. Several engines were instrumented and data collected to obtain a rich set of engine emissions and performance data. During the data collection, the performance of the catalyst under a variety of operating conditions was measured. This information will be necessary to specify a set of sensors that can then be used to reliably implement NSCRs as plausible technologies to reduce NOx emissions for four-stroke cycle engines used in the E&P industry. A complete summary all the technologies investigated to data is included in the report. For each technology, the summary includes a description of the process, the emission reduction that is to be expected, information on the cost of the technology, development status, practical considerations, compatibility with other air pollutant control technologies, and any references used to obtain the information.

An estimate of the distribution of fatigue ranges or extreme loads for wind turbines may be obtained by separating the problem into two uncoupled parts, (1) a turbine specific portion, independent of the site and (2) a site-specific description of environmental variables. We consider contextually appropriate probability models to describe the turbine specific response for extreme loads or fatigue. The site-specific portion is described by a joint probability distribution of a vector of environmental variables, which characterize the wind process at the hub-height of the wind turbine. Several approaches are considered for combining the two portions to obtain an estimate of the extreme load, e.g., 50-year loads or fatigue damage. We assess the efficacy of these models to obtain accurate estimates, including various levels of epistemic uncertainty, of the turbine response.

Tensegrity is the word coined by Buckminster Fuller as a contraction of tensional integrity. A tensegrity system is established when a set of discontinuous compressive components interacts with a set of continuous tensile components to define a stable volume in space. Tensegrity structures are mechanically stable not because of the strength of individual members but because of the way the entire structure distributes and balances mechanical loads. Tensile forces naturally transmit themselves over the shortest distance between two points, so the members of a tensegrity system are precisely positioned to best withstand stress. Thus, tensegrity systems offer a maximum amount of strength for a given amount of material. Man-made structures have traditionally been designed to avoid developing large tensile stresses. In contrast, nature always uses a balance of tension and compression. Tensegrity principles apply at essentially every size-scale in the human body. Macroscopically, the bones that constitute our skeleton are pulled up against the force of gravity and stabilized in a vertical form by the pull of tensile muscles, tendons and ligaments. Microscopically, a tensegrity structure has been proposed for the skeleton of cells. This report contains the results of a feasibility study and literature survey to explore the potential …

This report summarizes the work performed by Hybrid Power Generation Systems, LLC (HPGS) during the July 2003 to December 2003 reporting period under Cooperative Agreement DE-FC26-01NT40779 for the U. S. Department of Energy, National Energy Technology Laboratory (DOE/NETL) entitled ''Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation''. The main objective of this project is to develop and demonstrate the feasibility of a highly efficient hybrid system integrating a planar Solid Oxide Fuel Cell (SOFC) and a micro-turbine. In addition, an activity included in this program focuses on the development of an integrated coal gasification fuel cell system concept based on planar SOFC technology. Also, another activity included in this program focuses on the development of SOFC scale up strategies.

This document introduces the use of Trilinos, version 3.1. Trilinos has been written to support, in a rigorous manner, the solver needs of the engineering and scientific applications at Sandia National Laboratories. Aim of this manuscript is to present the basic features of some of the Trilinos packages. The presented material includes the definition of distributed matrices and vectors with Epetra, the iterative solution of linear system with AztecOO, incomplete factorizations with IFPACK, multilevel methods with ML, direct solution of linear system with Amesos, and iterative solution of nonlinear systems with NOX. With the help of several examples, some of the most important classes and methods are detailed to the inexperienced user. For the most majority, each example is largely commented throughout the text. Other comments can be found in the source of each example. This document is a companion to the Trilinos User's Guide and Trilinos Development Guides. Also, the documentation included in each of the Trilinos' packages is of fundamental importance.

LOCO is a code for analysis of the linear optics in a storage ring based on the closed orbit response to steering magnets. The analysis provides information on focusing errors, BPM gain and rotation errors, and local coupling. Here, we report the results of an application of LOCO to the KEK-ATF. Although the analysis appears to have provided useful information on the optics of the machine, it appears that one of the main aims of the study--to reduce the vertical emittance by correcting the local coupling--was not successful, and we discuss some possible reasons for this.

A mine dog evaluation project initiated by the Geneva International Center for Humanitarian Demining is evaluating the capability and reliability of mine detection dogs. The performance of field-operational mine detection dogs will be measured in test minefields in Afghanistan containing actual, but unfused landmines. Repeated performance testing over two years through various seasonal weather conditions will provide data simulating near real world conditions. Soil samples will be obtained adjacent to the buried targets repeatedly over the course of the test. Chemical analysis results from these soil samples will be used to evaluate correlations between mine dog detection performance and seasonal weather conditions. This report documents the analytical chemical methods and results from the fifth batch of soils received. This batch contained samples from Kharga, Afghanistan collected in June 2003.