A letter report issued by the Government Accountability Office with an abstract that begins "Farmers receive about $20 billion annually in federal farm program payments, which go to individuals and "entities," including corporations, partnerships, and estates. Under certain conditions, estates may receive payments for the first 2 years after an individual's death. For later years, the U.S. Department of Agriculture (USDA) must determine that the estate is not being kept open for payments. As requested, GAO evaluated the extent to which USDA (1) follows its regulations that are intended to provide reasonable assurance that farm program payments go only to eligible estates and (2) makes improper payments to deceased individuals. GAO reviewed a nonrandom sample of estates based, in part, on the amount of payments an estate received and compared USDA's databases that identify payment recipients with individuals the Social Security Administration listed as deceased."

None

Repeating earthquakes (REs) are sequences of events that have nearly identical waveforms and are interpreted to represent fault asperities driven to failure by loading from aseismic creep on the surrounding fault surface at depth. We investigate the occurrence of these REs along faults in central California to determine which faults exhibit creep and the spatio-temporal distribution of this creep. At the juncture of the San Andreas and southern Calaveras-Paicines faults, both faults as well as a smaller secondary fault, the Quien Sabe fault, are observed to produce REs over the observation period of March 1984-May 2005. REs in this area reflect a heterogeneous creep distribution along the fault plane with significant variations in time. Cumulative slip over the observation period at individual sequence locations is determined to range from 5.5-58.2 cm on the San Andreas fault, 4.8-14.1 cm on the southern Calaveras-Paicines fault, and 4.9-24.8 cm on the Quien Sabe fault. Creep at depth appears to mimic the behaviors seen of creep on the surface in that evidence of steady slip, triggered slip, and episodic slip phenomena are also observed in the RE sequences. For comparison, we investigate the occurrence of REs west of the San Andreas fault within the …

In an effort to increase the U.S. energy reserves and lower costs for finding and retrieving oil, the USDOE created a solicitation to encourage industry to focus on means to operate in small diameter well-Microhole. Partially in response to this solicitation and because Western Well Tool's (WWT) corporate objective to develop small diameter coiled tubing drilling tractor, WWT responded to and was awarded a contract to design, prototype, shop test, and field demonstrate a Microhole Drilling Tractor (MDT). The benefit to the oil industry and the US consumer from the project is that with the MDT's ability to facilitate Coiled Tubing drilled wells to be 1000-3000 feet longer horizontally, US brown fields can be more efficiently exploited resulting in fewer wells, less environmental impact, greater and faster oil recovery, and lower drilling costs. Shortly after award of the contract, WWT was approached by a major oil company that strongly indicated that the specified size of a tractor of 3.0 inches diameter was inappropriate and that immediate applications for a 3.38-inch diameter tractor would substantially increase the usefulness of the tool to the oil industry. Based on this along with an understanding with the oil company to use the tractor in …

CERES is a dilepton experiment at the CERN SPS, known for its observation of enhanced production of low mass efe- pairs in collisions between heavy nuclei [1]. The upgrade of CERES in 1997-1998 by a radial Time Projection Chamber (TPC) [2] allowed to improve the momentum resolution and the particle identification capability while retaining the cylindrical symmetry. The upgraded experiment is shown in Fig. 1. The upgrade also extended the sensitivity of CERES to hadrons and made possible results like those described below. The measurement of central Pb+Au collisions at the maximum SPS energy of 158 GeV per nucleon in the fall of 2000 was the first run of the fully upgraded CERES and at the same time the last run of this experiment. About 30 million Pb+Au collision events at 158 GeV per nucleon were collected, most of them with centrality within the top 7% of the geometrical cross section {sigma}{sub G} = 6.94 b. Small samples of the 20% and the minimum bias collisions, as well as a short run at 80 AGeV, were recorded in addition. The dilepton mass spectra from this experiment were published in [3]. In this talk I present two particular results of hadron …

We discuss recent progress in studies of QCD thermodynamics with almost physical light quark masses and a physical value of the strange quark mass. We summarize results on the transition temperature in QCD and analyze the relation between deconfinement and chiral symmetry restoration.

Following the success of the Anole test of portable detection system, the U.S. Department of Homeland Security (DHS) Domestic Nuclear Detection Office organized a test and evaluation campaign for personal radiation detectors (PRDs), also known as 'Pagers'. This test, 'Bobcat', was conducted from July 17 to August 8, 2006, at the Nevada Test Site. The Bobcat test was designed to evaluate the performance of PRDs under various operational scenarios, such as pedestrian surveying, mobile surveying, cargo container screening, and pedestrian chokepoint monitoring. Under these testing scenarios, many operational characteristics of the PRDs, such as gamma and neutron sensitivities, positive detection and false alarm rates, response delay times, minimum detectable activities, and source localization errors, were analyzed. This paper will present the design, execution, and methodologies used to test this equipment for the DHS.

In today's world, the use of parallel programming and architectures is essential for simulating practical problems in engineering and related disciplines. Remarkable progress in CPU architecture (multi- and many-core, SMT, transactional memory, virtualization support, etc.), system scalability, and interconnect technology continues to provide new opportunities, as well as new challenges for both system architects and software developers. These trends are paralleled by progress in parallel algorithms, simulation techniques, and software integration from multiple disciplines. In its 6th year ParSim continues to build a bridge between computer science and the application disciplines and to help with fostering cooperations between the different fields. In contrast to traditional conferences, emphasis is put on the presentation of up-to-date results with a shorter turn-around time. This offers the unique opportunity to present new aspects in this dynamic field and discuss them with a wide, interdisciplinary audience. The EuroPVM/MPI conference series, as one of the prime events in parallel computation, serves as an ideal surrounding for ParSim. This combination enables the participants to present and discuss their work within the scope of both the session and the host conference. This year, ten papers with authors in ten countries were submitted to ParSim, and after a quick …

The use of 3-D geophysical models to predict nuclear test ban monitoring observables (phase travel times, amplitudes, dispersion, etc.) is widely anticipated to provide improvements in the basic seismic monitoring functions of detection, association, location, discrimination and yield estimation. A number of questions arise when contemplating a transition from 1-D, 2-D and 2.5-D models to constructing and using 3-D models, among them: (1) Can a 3-D geophysical model or a collection of 3-D models provide measurably improved predictions of seismic monitoring observables over existing 1-D models, or 2-D and 2 1/2-D models currently under development? (2) Is a single model that can predict all observables achievable, or must separate models be devised for each observable? How should joint inversion of disparate observable data be performed, if required? (3) What are the options for model representation? Are multi-resolution models essential? How does representation affect the accuracy and speed of observable predictions? (4) How should model uncertainty be estimated, represented and how should it be used? Are stochastic models desirable? (5) What data types should be used to construct the models? What quality control regime should be established? (6) How will 3-D models be used in operations? Will significant improvements in the …

None

Amorphous metal and ceramic thermal spray coatings have been developed that can be used to enhance the corrosion resistance of containers for the transportation, aging and disposal of spent nuclear fuel and high-level radioactive wastes. Iron-based amorphous metal formulations with chromium, molybdenum and tungsten have shown the corrosion resistance believed to be necessary for such applications. Rare earth additions enable very low critical cooling rates to be achieved. The boron content of these materials, and their stability at high neutron doses, enable them to serve as high efficiency neutron absorbers for criticality control. Ceramic coatings may provide even greater corrosion resistance for container applications, though the boron-containing amorphous metals are still favored for criticality control applications. These amorphous metal and ceramic materials have been produced as gas atomized powders and applied as near full density, non-porous coatings with the high-velocity oxy-fuel process. This paper summarizes the performance of these coatings as corrosion-resistant barriers, and as neutron absorbers. Relevant corrosion models are also discussed, as well as a cost model to quantify the economic benefits possible with these new materials.

An overview of the High-Performance Corrosion-Resistant Materials (HPCRM) Program, which was co-sponsored by the Defense Advanced Research Projects Agency (DARPA) Defense Sciences Office (DSO) and the United States Department of Energy (DOE) Office of Civilian and Radioactive Waste Management (OCRWM), is discussed. Programmatic investigations have included a broad range of topics: alloy design and composition; materials synthesis; thermal stability; corrosion resistance; environmental cracking; mechanical properties; damage tolerance; radiation effects; and important potential applications. Amorphous alloys identified as SAM2X5 (Fe{sub 49.7}Cr{sub 17.7}Mn{sub 1.9}Mo{sub 7.4}W{sub 1.6}B{sub 15.2}C{sub 3.8}Si{sub 2.4}) and SAM1651 (Fe{sub 48}Mo{sub 14}Cr{sub 15}Y{sub 2}C{sub 15}B{sub 6}) have been produced as melt-spun ribbons, drop-cast ingots and thermal-spray coatings. Chromium (Cr), molybdenum (Mo) and tungsten (W) additions provided corrosion resistance, while boron (B) enabled glass formation. Earlier electrochemical studies of melt-spun ribbons and ingots of these amorphous alloys demonstrated outstanding passive film stability. More recently thermal-spray coatings of these amorphous alloys have been made and subjected to long-term salt-fog and immersion tests. Good corrosion resistance has been observed during salt-fog testing. Corrosion rates were measured in situ with linear polarization, while simultaneously monitoring the open-circuit corrosion potentials. Reasonably good performance was observed. The sensitivity of these measurements to electrolyte composition and temperature …

We report on dilepton measurements for central Pb on Au collisions at the top CERN SPS energy with the upgraded CERES experiment. The dilepton mass spectrum of 2000 data with improved mass resolution shows an enhancement over the expectation from hadron decays that is well described by a model including a strong broadening of the {rho} spectral function. The measured excess yield excludes the dropping mass scenario. We also report on the {phi} meson measured simultaneously both in the K{sup +}K{sup -} and in the dilepton decay channel for the first time in high energy heavy-ion collisions. An excellent agreement is found between the rapidity densities and the shape of the measured transverse momentum spectrum. The data rule out a possible enhancement of the {phi} yield in the leptonic over hadronic channel by a factor larger than 1.6 at 95% CL. CERES results are in agreement with NA49 results.

Amorphous alloys identified as SAM2X5 (Fe{sub 49.7}Cr{sub 17.7}Mn{sub 1.9}Mo{sub 7.4}W{sub 1.6}B{sub 15.2}C{sub 3.8}Si{sub 2.4}) and SAM1651 (Fe{sub 48}Mo{sub 14}Cr{sub 15}Y{sub 2}C{sub 15}B{sub 6}) have been produced as melt-spun ribbons, drop-cast ingots and thermal-spray coatings. Chromium (Cr), molybdenum (Mo) and tungsten (W) additions provided corrosion resistance, while boron (B) enabled glass formation. Earlier electrochemical studies of melt-spun ribbons and ingots of these amorphous alloys demonstrated outstanding passive film stability. More recently thermal-spray coatings of these amorphous alloys have been made and subjected to long-term salt-fog and immersion tests. Good corrosion resistance has been observed during salt-fog testing. Corrosion rates were measured in situ with linear polarization, while simultaneously monitoring the open-circuit corrosion potentials. Reasonably good performance was observed. The sensitivity of these measurements to electrolyte composition and temperature was determined. The high boron content of SAM2X5 also made it an effective neutron absorber, and suitable for criticality control applications.

Conventionally, sequential analysis of time-dependent observation data follows a simple First-in/ First-out (FIFO) scheme. Under a FIFO scheme, the oldest data point in the system is first chosen for subsequent analysis, such as for computing population mean and sequential probability ratio test (SPRT). Once the analysis is completed or the decision is made, the oldest data point is dropped out of the system and a new sample is drawn. The intrinsic disadvantage of a FIFO scheme is its delayed response. At the time a new sample is drawn, the analysis either cannot tell immediately about the sample, or makes an incorrect statement about the sample. In our research, we adopted a Last-In/ First-Elected/ Last-Out (LIFELO) scheme for realtime sequential analysis of continuous spatial survey data. In this scheme, the most recent data point from a given spatial location in the sequence is first selected for starting the subsequent analysis. If needed, the next youngest data point is chosen to join the analysis. This process is continued until a conclusion is made about the most recent location or data point. LIFELO scheme offers a reduced response time and spatial errors for decision-making for time-and-spatial critical environmental contamination surveys. In terms of …

We discuss recent progress made studies of bulk thermodynamics of strongly interacting matter through lattice simulations of QCD with an almost physical light and strange quark mass spectrum. We present results on the QCD equation of state at vanishing and non-vanishing quark chemical potential and show first results on baryon number and strangeness fluctuations, which might be measured in event-by-event fluctuations in low energy runs at RHIC as well as at FAIR.

At LLNL and UC Davis, we are developing several techniques for the real-time sampling and analysis of trace gases, aerosols and exhaled breath that could be useful for a modular, integrated system for breath analysis. Those techniques include single-particle bioaerosol mass spectrometry (BAMS) for the analysis of exhaled aerosol particles or droplets as well as breath samplers integrated with gas chromatography mass spectrometry (GC-MS) or MEMS-based differential mobility spectrometry (DMS). We describe these techniques and present recent data obtained from human breath or breath condensate, in particular, addressing the question of how environmental exposure influences the composition of breath.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Greg Abbott, regarding a legal question submitted for clarification: Whether the State Board of Education may adopt a procedural rule that requires a vote of greater than a majority of the number of members of the board fixed by statute, I.e., a “supermajority” (RQ-0561-GA)

For some time there has been a growing sense of urgency to develop and deploy effective missile defenses against a range of long and short range ballistic missile threats. Although many might believe this to be relative new to U.S. national security objectives, such interest has been ongoing since the end of World War II. Many current technologies being investigated date their start to the 1980s, and earlier. This effort has been challenging technically and politically controversial. Some $110 billion has been spent since the mid-1980s; Congress appropriated $9.3 billion in FY2006. For FY2008 the Administration requested $8.9 billion for the Missile Defense Agency. This report provides a brief overview of U.S. efforts to date.

None

This report provides a condensed review of re-transmission consent and other federal rules affecting programmer- distributor negotiations.

None

This paper evaluates the effect of the impact limiter material degradation on the structural integrity of the 9975 package containment vessel during a postulated accident event of forklift truck collision. The analytical results show that the primary and secondary containment vessels remain structurally intact for Celotex material degraded to 20% of the baseline value.

This paper presents a finite-element technique to simulate the structural responses and to evaluate the cumulative damage of a radioactive material packaging requiring bolt closure-tightening torque and subjected to the scenarios of the Hypothetical Accident Conditions (HAC) defined in the Code of Federal Regulations Title 10 part 71 (10CFR71). Existing finite-element methods for modeling closure stresses from bolt pre-load are not readily adaptable to dynamic analyses. The HAC events are required to occur sequentially per 10CFR71 and thus the evaluation of the cumulative damage is desirable. Generally, each HAC event is analyzed separately and the cumulative damage is partially addressed by superposition. This results in relying on additional physical testing to comply with 10CFR71 requirements for assessment of cumulative damage. The proposed technique utilizes the combination of kinematic constraints, rigid-body motions and structural deformations to overcome some of the difficulties encountered in modeling the effect of cumulative damage. This methodology provides improved numerical solutions in compliance with the 10CFR71 requirements for sequential HAC tests. Analyses were performed for the Bulk Tritium Shipping Package (BTSP) designed by Savannah River National Laboratory to demonstrate the applications of the technique. The methodology proposed simulates the closure bolt torque preload followed by the sequential …