Using 214 fb{sup -1} of data recorded by the BABAR detector at the PEPII electron-positron collider, they study the decay D{sub s}{sup +} {yields} K{sup +}K{sup -}e{sup +}{nu}{sub e}. Except for a small S-wave contribution, the events with K{sup +}K{sup -} masses in the range 1.01-1.03 GeV/c{sup 2} correspond to {phi} mesons. For D{sub s}{sup +} {yields} {phi}e{sup +}{nu}{sub e} decays, they measure the relative normalization of the Lorentz invariant form factors at q{sup 2} = 0, r{sub V} = V(0)/A{sub 1}(0) = 1.849 {+-} 0.060 {+-} 0.095, r{sub 2} = A{sub 2}(0)/A{sub 1}(0) = 0.763 {+-} 0.071 {+-} 0.065 and the pole mass of the axial-vector form factors m{sub A} = (2.28{sub -0.18}{sup +0.23} {+-} 0.18) GeV/c{sup 2}. Within the same K{sup +}K{sup -} mass range, they also measure the relative branching fractions {Beta}(D{sub s}{sup +} {yields} K{sup +}K{sup -}e{sup +}{nu}{sub e})/{Beta}(D{sub s}{sup +} {yields} K{sup +}K{sup -}{pi}{sup +}) - 0.558 {+-} 0.007 {+-} 0.016, from which they obtain the total branching fraction {Beta}(D{sub s}{sup +} {yields} {phi}e{sup +}{nu}{sub e}) = (2.61 {+-} 0.03 {+-} 0.08 {+-} 0.15) x 10{sup -2}. By comparing this value with the predicted decay rate, they extract A{sub 1}(0) = 0.607 {+-} 0.011 {+-} …

Lattice level measurements of material response under extreme conditions are required to build a phenomenological understanding of the shock response of solids. We have successfully used laser produced plasma x-ray sources coincident with laser driven shock waves to make in-situ measurements of the lattice response during shock compression for both single crystal and polycrystalline materials. Using a detailed analysis of shocked single crystal iron which has undergone the {alpha} - {var_epsilon} phase transition we can constrain the transition mechanism to be consistent with a compression and shuffle of alternate lattice planes.

A general problem when fitting EXAFS data is determining whether particular parameters are statistically significant. The F-test is an excellent way of determining relevancy in EXAFS because it only relies on the ratio of the fit residual of two possible models, and therefore the data errors approximately cancel. Although this test is widely used in crystallography (there, it is often called a 'Hamilton test') and has been properly applied to EXAFS data in the past, it is very rarely applied in EXAFS analysis. We have implemented a variation of the F-test adapted for EXAFS data analysis in the RSXAP analysis package, and demonstrate its applicability with a few examples, including determining whether a particular scattering shell is warranted, and differentiating between two possible species or two possible structures in a given shell.

Inspection of United States-Department of Energy (US-DOE) model 9975 nuclear materials shipping package revealed corrosion of the lead shielding that was induced by off-gas constituents from organic components in the package. Experiments were performed to determine the corrosion rate of lead when exposed to off-gas or degradation products of these organic materials. The results showed that the room temperature vulcanizing (RTV) sealant was the most corrosive organic species used in the construction of the packaging, followed by polyvinyl acetate (PVAc) glue. Fiberboard material, also used in the construction of the packaging induced corrosion to a much lesser extent than the PVAc glue and RTV sealant, and only in the presence of condensed water. The results indicated faster corrosion at temperatures higher than ambient and with condensed water. In light of these corrosion mechanisms, the lead shielding was sheathed in a stainless steel liner to mitigate against corrosion.

InN nanorods were grown on a, c-, and r-plane of sapphire and also on Si (111) and GaN (0001) by non-catalytic, template-free hydride metal-organic vapor phase epitaxy and studied by transmission electron microscopy, electron energy loss (EELS) and photoluminescence (PL) at room temperature. These nanocrystals have different shapes and different faceting depending on the substrate used and their crystallographic orientation. EELS measurements have confirmed the high purity of these crystals. The observed PL peak was in the range of 0.9-0.95 eV. The strongest PL intensity was observed for the nanocrystals with the larger diameters.

Although the Advanced Light Source (ALS) was initially conceived primarily as a low energy (1.9GeV) 3rd generation source of VUV and soft x-ray radiation it was realized very early in the development of the facility that a multipole wiggler source coupled with high quality, (brightness preserving), optics would result in a beamline whose performance across the optimal energy range (5-15keV) for macromolecular crystallography (MX) would be comparable to, or even exceed, that of many existing crystallography beamlines at higher energy facilities. Hence, starting in 1996, a suite of three beamlines, branching off a single wiggler source, was constructed, which together formed the ALS Macromolecular Crystallography Facility. From the outset this facility was designed to cater equally to the needs of both academic and industrial users with a heavy emphasis placed on the development and introduction of high throughput crystallographic tools, techniques, and facilities--such as large area CCD detectors, robotic sample handling and automounting facilities, a service crystallography program, and a tightly integrated, centralized, and highly automated beamline control environment for users. This facility was immediately successful, with the primary Multiwavelength Anomalous Diffraction beamline (5.0.2) in particular rapidly becoming one of the foremost crystallographic facilities in the US--responsible for structures such …

Obesity is increasing in an epidemic fashion in most countries and constitutes a public health problem by enhancing the risk for cardiovascular disease and metabolic disorders such as type 2 diabetes. Owing to the increase in obesity, life expectancy may start to decrease in developed countries for the first time in recent history. The factors determining fat mass in adult humans are not fully understood, but increased lipid storage in already developed fat cells is thought to be most important. We show that adipocyte number is a major determinant for the fat mass in adults. However, the number of fat cells stays constant in adulthood in lean and obese and even under extreme conditions, indicating that the number of adipocytes is set during childhood and adolescence. To establish the dynamics within the stable population of adipocytes in adults, we have measured adipocyte turnover by analyzing the integration of {sup 14}C derived from nuclear bomb tests in genomic DNA. Approximately 10% of fat cells are renewed annually at all adult ages and levels of body mass index. Neither adipocyte death nor generation rate is altered in obesity, suggesting a tight regulation of fat cell number that is independent of metabolic profile …

The Solenoid Transport Experiment (STX) at LBNL successfully demonstrated the transport of a space-charge dominated ion beam in a two-solenoid lattice. Initial experiments showed a strong dependence of electron cloud effects on solenoid field strength. A current-reducing aperture, two solenoids and in-bore diagnostics were added to the two-solenoid lattice in order to study electron cloud effects more closely. Experiments were conducted with a 10 {micro}s, singly charged potassium ion bunch at an ion energy of 0.3 MeV and currents of 26 mA and 45 mA. A qualitative comparison of experimental and calculated results are presented, including a comparison of the effects of manipulating electrons on the beam dynamics, quantifying beam-induced gas desorption, ionization, and electron effects.

None

The resolution of chemically amplified resists is becoming an increasing concern, especially for lithography in the extreme ultraviolet (EUV) regime. Large-scale screening and performance-based down-selection is currently underway to identify resist platforms that can support shrinking feature sizes. Resist screening efforts, however, are hampered by the absence of reliable resolution metrics that can objectively quantify resist resolution in a high-throughput fashion. Here we examine two high-throughput metrics for resist resolution determination. After summarizing their details and justifying their utility, we characterize the sensitivity of both metrics to two of the main experimental uncertainties associated with lithographic exposure tools, namely: limited focus control and limited knowledge of optical aberrations. For an implementation at EUV wavelengths, we report aberration and focus limited error bars in extracted resolution of {approx} 1.25 nm RMS for both metrics making them attractive candidates for future screening and down-selection efforts.

The Dark Energy Survey (DES) collaboration will study cosmic acceleration with a 5000 deg2 griZY survey in the southern sky over 525 nights from 2011-2016. The DES data management (DESDM) system will be used to process and archive these data and the resulting science ready data products. The DESDM system consists of an integrated archive, a processing framework, an ensemble of astronomy codes and a data access framework. We are developing the DESDM system for operation in the high performance computing (HPC) environments at the National Center for Supercomputing Applications (NCSA) and Fermilab. Operating the DESDM system in an HPC environment offers both speed and flexibility. We will employ it for our regular nightly processing needs, and for more compute-intensive tasks such as large scale image coaddition campaigns, extraction of weak lensing shear from the full survey dataset, and massive seasonal reprocessing of the DES data. Data products will be available to the Collaboration and later to the public through a virtual-observatory compatible web portal. Our approach leverages investments in publicly available HPC systems, greatly reducing hardware and maintenance costs to the project, which must deploy and maintain only the storage, database platforms and orchestration and web portal nodes that …

Moving beyond ITER toward a demonstration power reactor (Demo) will require the integration of stable high fusion gain in steady-state, advanced methods for dissipating very high divertor heat-fluxes, and adherence to strict limits on in-vessel tritium retention. While ITER will clearly address the issue of high fusion gain, and new and planned long-pulse experiments (EAST, JT60-SA, KSTAR, SST-1) will collectively address stable steady-state high-performance operation, none of these devices will adequately address the integrated heat-flux, tritium retention, and plasma performance requirements needed for extrapolation to Demo. Expressing power exhaust requirements in terms of P{sub heat}/R, future ARIES reactors are projected to operate with 60-200MW/m, a Component Test Facility (CTF) or Fusion Development Facility (FDF) for nuclear component testing (NCT) with 40-50MW/m, and ITER 20-25MW/m. However, new and planned long-pulse experiments are currently projected to operate at values of P{sub heat}/R no more than 16MW/m. Furthermore, none of the existing or planned experiments are capable of operating with very high temperature first-wall (T{sub wall} = 600-1000C) which may be critical for understanding and ultimately minimizing tritium retention with a reactor-relevant metallic first-wall. The considerable gap between present and near-term experiments and the performance needed for NCT and Demo motivates the development …

In this paper we report on strangeness measurements in p+p, Au+Au and Cu+Cu collisions at different energies in the STAR detector at RHIC. We will focus on two momentum regions in particular: Firstly we look at strangeness enhancement in A+A collisions with respect to p+p. These yields are dominated by low transverse momentum. We compare the enhancements from Au+Au and Cu+Cu data at {radical}s{sub NN} = 200 GeV with Pb+Pb data at {radical}s{sub NN} = 17.2 GeV and find that the enhancement does not scale with N{sub part} as expected, but rather scales with N{sub part}{sup 1/3}, where N{sub part} represents the number of participants; We then examine {Lambda}/K{sub S}{sup 0} ratios at intermediate transverse momentum in both Au+Au and Cu+Cu data where we find a greater enhancement in Cu+Cu compared to Au+Au data when we compare integrated ratios between 1.5 < p{sub T} < 3.5 GeV/c.

The Generation IV International Forum (GIF) emphasizes proliferation resistance and physical protection (PR&PP) as a main goal for future nuclear energy systems. The GIF PR&PP Working Group has developed a methodology for the evaluation of these systems. As an application of the methodology, Markov model has been developed for the evaluation of proliferation resistance and is demonstrated for a hypothetical Example Sodium Fast Reactor (ESFR) system. This paper presents the case of diversion by the facility owner/operator to obtain material that could be used in a nuclear weapon. The Markov model is applied to evaluate material diversion strategies. The following features of the Markov model are presented here: (1) An effective detection rate has been introduced to account for the implementation of multiple safeguards approaches at a given strategic point; (2) Technical failure to divert material is modeled as intrinsic barriers related to the design of the facility or the properties of the material in the facility; and (3) Concealment to defeat or degrade the performance of safeguards is recognized in the Markov model. Three proliferation risk measures are calculated directly by the Markov model: the detection probability, technical failure probability, and proliferation time. The material type is indicated by …

The dynamics of water molecules near the protein surface are different from those of bulk water and influence the structure and dynamics of the protein itself. To elucidate the temperature dependence hydration dynamics of water molecules, we present results from the molecular dynamic simulation of the water molecules surrounding two proteins (Carboxypeptidase inhibitor and Ovomucoid) at seven different temperatures (T=273 to 303 K, in increments of 5 K). Translational diffusion coefficients of the surface water and bulk water molecules were estimated from 2 ns molecular dynamics simulation trajectories. Temperature dependence of the estimated bulk water diffusion closely reflects the experimental values, while hydration water diffusion is retarded significantly due to the protein. Protein surface induced scaling of translational dynamics of the hydration waters is uniform over the temperature range studied, suggesting the importance protein-water interactions.

InN films grown by molecular beam epitaxy have been subjected to 2 MeV He{sup +} irradiation followed by thermal annealing. Theoretical analysis of the electron mobilities shows that thermal annealing removes triply charged donor defects, creating films with electron mobilities approaching those predicted for uncompensated, singly charged donors. Optimum thermal annealing of irradiated InN can be used to produce samples with electron mobilities higher than those of as grown films.

The CALPHAD approach is applied to kinetic studies of phase transformations and aging of prototypes of Ni-Cr-Mo-based alloys selected for waste disposal canisters in the Yucca Mountain Project (YMP). Based on a previous study on alloy stability for several candidate alloys, the thermodynamic driving forces together with a newly developed mobility database have been used to analyze diffusion-controlled transformations in these Ni-based alloys. Results on precipitation of the Ni{sub 2}Cr-ordered phase in Ni-Cr and Ni-Cr-Mo alloys, and of the complex P- and {delta}-phases in a surrogate of Alloy 22 are presented, and the output from the modeling are compared with experimental data on aging.

The need to consider aqueous and sorption kinetics andmicrobiological processes arises in many subsurface problems. Ageneral-rate expression has been implemented into the TOUGHREACTsimulator, which considers multiple mechanisms (pathways) and includesmultiple product, Monod, and inhibition terms. This paper presents aformulation for incorporating kinetic rates among primary species intomass-balance equations. The space discretization used is based on aflexible integral finite difference approach that uses irregular griddingto model bio-geologic structures. A general multi-region model forhydrological transport interacted with microbiological and geochemicalprocesses is proposed. A 1-D reactive transport problem with kineticbiodegradation and sorption was used to test the enhanced simulator,which involves the processes that occur when a pulse of water containingNTA (nitrylotriacetate) and cobalt is injected into a column. The currentsimulation results agree very well with those obtained with othersimulators. The applicability of this general multi-region model wasvalidated by results from a published column experiment ofdenitrification and sulfate reduction. The matches with measured nitrateand sulfate concentrations were adjusted with the interficial areabetween mobile hydrological and immobile biological regions. Resultssuggest that TOUGHREACT can not only be a useful interpretative tool forbiogeochemical experiments, but also can produce insight into processesand parameters of microscopic diffusion and their interplay withbiogeochemical reactions. The geometric- and process-based multi-regionmodel may provide …

Prochlorococcus is a marine cyanobacterium that numerically dominates the mid-latitude oceans and is the smallest known oxygenic phototroph. Numerous isolatesfrom diverse areas of the world's oceans have been studied and shown to be physiologically and genetically distinct. All isolates described thus far can be assigned to either a tightly clustered high-light (HL)-adapted clade, or a more divergent low-light (LL)-adapted group. The 16S rRNA sequences of the entire Prochlorococcus group differ by at most 3percent, and the four initially published genomes revealed patterns of genetic differentiation that help explain physiological differences among the isolates. Here we describe the genomes of eight newly sequenced isolates and combine them with the first four genomes for a comprehensive analysis of the core (shared by all isolates) and flexible genes of the Prochlorococcus group, and the patterns of loss and gain of the flexible genes over the course of evolution. There are 1,273 genes that represent the core shared by all 12 genomes. They are apparently sufficient, according to metabolic reconstruction, to encode a functional cell. We describe a phylogeny for all 12 isolates by subjecting their complete proteomes to three different phylogenetic analyses. For each non-core gene, we used a maximum parsimony method to …

Building energy performance (BEP) simulation is still rarely used in building design, commissioning and operations. The process is too costly and too labor intensive, and it takes too long to deliver results. Its quantitative results are not reproducible due to arbitrary decisions and assumptions made in simulation model definition, and can be trusted only under special circumstances. A methodology to semi-automate BEP simulation preparation and execution makes this process much more effective. It incorporates principles of information science and aims to eliminate inappropriate human intervention that results in subjective and arbitrary decisions. This is achieved by automating every part of the BEP modeling and simulation process that can be automated, by relying on data from original sources, and by making any necessary data transformation rule-based and automated. This paper describes the new methodology and its relationship to IFC-based BIM and software interoperability. It identifies five steps that are critical to its implementation, and shows what part of the methodology can be applied today. The paper concludes with a discussion of application to simulation with EnergyPlus, and describes data transformation rules embedded in the new Geometry Simplification Tool (GST).

The inclusive B -> Xs l+ l- decay rate in the large q2 region (q2> m_psi'2) receives significant nonperturbative corrections. The resulting uncertainties can be drastically reduced by normalizing the rate to the B -> Xu l nu rate with the same q2 cut, which allows for much improved tests of short distance physics. We calculate this ratio, including the order 1/m_b3 nonperturbative corrections and the analytically known NNLO perturbative corrections. Since in the large q2 region an inclusive measurement may be feasible via a sum over exclusive states, our results could be useful for measurements at LHCb and possibly for studies of B -> Xd l+ l-.

This paper describes a new computerized Subdivision Energy Analysis Tool being developed to allow users to interactively design subdivision street layouts while receiving feedback about energy impacts based on user-specified building design variants and availability of roof surfaces for photovoltaic and solar water heating systems.

Glass frits with a high B{sub 2}O{sub 3} concentration have been designed which, when combined with high-alumina concentration nuclear waste streams, will form glasses with durabilities that are acceptable for repository disposal and predictable using a free energy of hydration model. Two glasses with nepheline discriminator values closest to 0.62 showed significant differences in normalized boron release between the quenched and heat treated versions of each glass. X-ray diffraction confirmed that nepheline crystallized in the glass with the lowest nepheline discriminator value, and nepheline may also exist in the second glass as small nanocrystals. The high-B{sub 2}O{sub 3} frit was successful in producing simulated waste glasses with no detectable nepheline crystallization at waste loadings of up to 45 wt%. The melt rate of this frit was also considerably better than other frits with increased concentrations of Na{sub 2}O.

Enhanced heating from shock compression of a porous material can potentially suppress or delay cracking of the material on subsequent expansion. In this paper we quantify the expected enhanced heating in an experiment in which a sector of a thin cylindrical shell is driven from the inside surface by SEMTEX high explosive ({approx}1 {micro}s FWHM pressure pulse with peak pressure {approx}21.5 GPa). We first derive an analytical equation of state (EOS) for porous metals, then discuss the coupling of this EOS with material elastic-plastic response in a 2D hydrocode, and then discuss the modeling of the HE experiment with both fully dense and 10% porous Ta and a Bi/Ta composite. Finally, we compare our modeling with some recent experimental data.