A study of breakdown mechanism has been initiated at the Argonne Wakefield Accelerator (AWA). Breakdown may include several factors such as local field enhancement, explosive electron emission, Ohmic heating, tensile stress produced by electric field, and others. The AWA is building a dedicated facility to test various models for breakdown mechanisms and to determine the roles of different factors in the breakdown. We plan to trigger breakdown events with a high-powered laser at various wavelengths (IR to UV) to determine the role of explosive electron emission in the breakdown process. Another experimental idea follows from the recent work on a Schottky-enabled photoemission in an RF photoinjector [1] that allows us to determine in situ the field enhancement factor on a cathode surface. Monitoring the field enhancement factor before and after the breakdown can shed some light on a number of observations such as the crater formation process.

We present an analysis of inclusive {Omega}{sub c}{sup 0} baryon production and decays in 230.5 fb{sup -1} of data recorded with the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} collider at the Stanford Linear Accelerator Center. {Omega}{sub c}{sup 0} baryons are reconstructed in four final states ({Omega}{sup -}{pi}{sup +}, {Omega}{sup -}{pi}{sup +}{pi}{sup 0}, {Omega}{sup -}{pi}{sup +}{pi}{sup +}{pi}{sup -}, {Xi}{sup -}K{sup -}{pi}{sup +}{pi}{sup +}) and the ratios of branching fractions for these final states are measured. We also measure the momentum spectrum of the {Omega}{sub c}{sup 0} baryons in the e{sup +}e{sup -} center-of-mass frame. From the spectrum, they observe {Omega}{sub c}{sup 0} production from B decays and in c{bar c} events, and extract the two rates of production.

We propose and analyze a new tool to help solve sparse linear least-squares problems min{sub x} {parallel}Ax-b{parallel}{sub 2}. Our method is based on a sparse QR factorization of a low-rank perturbation {cflx A} of A. More precisely, we show that the R factor of {cflx A} is an effective preconditioner for the least-squares problem min{sub x} {parallel}Ax-b{parallel}{sub 2}, when solved using LSQR. We propose applications for the new technique. When A is rank deficient we can add rows to ensure that the preconditioner is well-conditioned without column pivoting. When A is sparse except for a few dense rows we can drop these dense rows from A to obtain {cflx A}. Another application is solving an updated or downdated problem. If R is a good preconditioner for the original problem A, it is a good preconditioner for the updated/downdated problem {cflx A}. We can also solve what-if scenarios, where we want to find the solution if a column of the original matrix is changed/removed. We present a spectral theory that analyzes the generalized spectrum of the pencil (A*A,R*R) and analyze the applications.

The selling of weapons-related nuclear knowledge by Russian scientists for economic gain constitutes a threat to US national security. Some estimate that the number of Russian scientists seeking permanent employment abroad constitute five to ten percent of all researchers who have left the field of science. And, there is concern that those who have left are ''the better minds.'' Moreover, the issue of brain drain concerns not only those who move abroad permanently, but those who still reside in Russia and travel abroad to sell their knowledge. Of particular concern to the US is the potential sale of WMD knowledge by some. To ''mitigate the risk that economic difficulties...might create the temptation for individuals or institutes to sell expertise to countries of proliferation concern and terrorist organizations,'' the Department of Energy launched a Nuclear Cities Initiative (NCI) in 1998 with the goal of creating commercial jobs and economic diversification in the ten closed cities that form the core of Russia's nuclear weapons complex to accommodate the loss of employment in the nuclear weapons industry. However, unless Russia opens access to the areas of its closed cities that are, or could become, involved in commercial activities-while of course carefully controlling access …

An analytical formulation of conductivity bounds by Bergman and Milton is used in a different way to obtain rigorous bounds on the real transport coefficients (electrical conductivity, thermal conductivity, and/or fluid permeability) of a fluid-saturated porous medium. These bounds do not depend explicitly on the porosity, but rather on two formation factors--one associated with the pore space and the other with the solid frame. Hashin-Shtrikman bounds for transport in random polycrystals of porous-material laminates will also be discussed.

The authors examine pair mass dependence near threshold as a means to measure the spin of the top quark in hadron collisions, and they discuss the possibility that a top quark signal could be hidden among the top events.

This Report is Description of Sensory Transduction in Microorganisms at Gordon Conference.

Adaptive mesh refinement selectively subdivides the elements of a coarse user supplied mesh to produce a fine mesh with reduced discretization error. Effective use of adaptive mesh refinement coupled with an a posteriori error estimator can produce a mesh that solves a problem to a given discretization error using far fewer elements than uniform refinement. A geometric multigrid solver uses increasingly finer discretizations of the same geometry to produce a very fast and numerically scalable solution to a set of linear equations. Adaptive mesh refinement is a natural method for creating the different meshes required by the multigrid solver. This paper describes the implementation of a scalable adaptive multigrid method on a distributed memory parallel computer. Results are presented that demonstrate the parallel performance of the methodology by solving a linear elastic rocket fuel deformation problem on an SGI Origin 3000. Two challenges must be met when implementing adaptive multigrid algorithms on massively parallel computing platforms. First, although the fine mesh for which the solution is desired may be large and scaled to the number of processors, the multigrid algorithm must also operate on much smaller fixed-size data sets on the coarse levels. Second, the mesh must be repartitioned as …

Experience gained during recent operation of high power 11.424 GHz rf sources for accelerators led to new, more strict requirements on system components. One of the basic components of such a system is a mode converter that transforms the rectangular waveguide mode into the TE{sub 01} mode in circular waveguide. With such a converter, it is possible to minimize the use of WR90 rectangular waveguide which was shown to be a weak part of the previous system at power levels higher than 100 MW and pulse lengths on the order of a microsecond. We used several methods to design a mode converter with extremely low parasitic mode conversion and compact size. These methods employ HFSS[4] and include multi-parameter searches, concurrent optimization with a mode-matching code Cascade[2], cascading of resulting S-matrices, and tolerance analysis using perturbation techniques. This report describes the design methods and presents results.

The goal of this work was to determine the effects on plutonium isotopic analysis of having plutonium inside of a 0.25 inch thick stainless steel can. To do this, they analyzed plutonium samples with a U-Pu InSpector (which uses a high-resolution gamma-ray detector and the analysis code MGA (Multi Group Analysis)), to determine both the 240-Pu/239-Pu ratio and the years since the plutonium was separated from americium. They analyzed a 1.6 kg plutonium sample that was placed inside of a 0.25 inch can at varying distances (0-2 meters) and count times (10 seconds-30 minutes). In separate experiments, they analyzed 0.4g plutonium sources with stainless-steel thickness' ranging from 0.125 to 1.0 inch. This report will show three effects of having plutonium in a stainless steel can: (1) 240-Pu/240-Pu can be quickly and accurately determined for a 1.6 kg plutonium sample inside of a 0.25 inch thick stainless-steel can, as this thickness of stainless steel acts as a perfect filter to reduce the intense 59 keV gamma peak from 241-Am. (2) The accuracy of determining the plutonium-americium separation date is not effected by 0.25 inch of stainless steel. (3) Both 240-Pu/239-Pu and the americium separation date can be accurately determined for stainless-steel …

Alloy 22 (N06022) is a nickel (Ni) based alloy containing nominally 22% Chromium (Cr), 13% Molybdenum (Mo) and 3% tungsten (W). Alloy 22 is highly resistant to general and localized corrosion such as pitting corrosion and stress corrosion cracking. Due to the formation of a stable passive film, when Alloy 22 is immersed in certain electrolytes, its corrosion potential (E{sub corr}) increases and its corrosion rate (CR) decreases as a function of the immersion time. This paper discusses the evolution of E{sub corr} and corrosion rate (CR) of creviced Alloy 22 specimens in six different mixtures of sodium chloride (NaCl) and potassium nitrate (KNO{sub 3}) at 100 C. Two types of specimens were used, polished as-welded (ASW) and as-welded solution plus heat-treated (ASW+SHT). The latter contained the black annealing oxide film on the surface. Results show that, for the two type of materials, as the immersion time increases, E{sub corr} increased and the CR decreased. Even for concentrated brine solutions at 100 C the CR was < 50 nm/year after more than 100 days immersion.

A scalable, distributed modeling and simulation framework has been developed at Argonne National Laboratory to study Intelligent Transportation Systems. The framework can run on a single-processor workstation, or run distributed on a multiprocessor computer or network of workstations. The framework is modular and supports plug-in models, hardware, and live data sources. The initial set of models currently includes road network and traffic flow, probe and smart vehicles, traffic management centers, communications between vehicles and centers, in-vehicle navigation systems, roadway traffic advisories. The modeling and simulation capability has been used to examine proposed ITS concepts. Results are presented from modeling scenarios from the Advanced Driver and Vehicle Advisory Navigation Concept (ADVANCE) experimental program to demonstrate how the framework can be used to evaluate the benefits of ITS and to plan future ITS operational tests and deployment initiatives.

Because of their strong internal bonding, S-decorated Cu trimers are a likely agent of S-enhanced Cu transport between islands on Cu(111). According to ab-initio calculations, excellent healing of dangling Cu valence results in an ad-Cu{sub 3}S{sub 3} formation energy of only {approximately}0.28 eV, compared to 0.79 eV for a self-adsorbed Cu atom, and a diffusion barrier {le}0.35 eV.

New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. One of these compositions, SAM1651, is discussed in detail to illustrate the promise of this general class of materials.

The long-term corrosion test facility (LTCTF) at the Lawrence Livermore National Laboratory (LLNL) consisted of 22 vessels that housed more than 7,000 corrosion test specimens from carbon steels to highly corrosion resistant materials such Alloy 22 and Ti Grade 7. The specimens from LTCTF range from standard weight-loss coupons to U-bend specimens for testing susceptibility to environmentally assisted cracking. Each vessel contained approximately 1000 liters of concentrated brines at 60 C or 90 C. The LTCTF started its operations in late 1996. The thousands of specimens from the LTCTF were removed in August-September 2006. The specimens are being catalogued and stored for future characterization. Previously removed specimens (e.g. 1 and 5 years) are also archived for further studies.

In this paper, we present the recent results of our research on the ultra-high power fast silicon RF switch and its application on active X-Band RF pulse compression systems. This switch is composed of a group of PIN diodes on a high purity silicon wafer and has achieved a switching time of 300ns. The wafer is inserted into a cylindrical waveguide operating in the TE01 mode. Switching is performed by injecting carriers into the bulk silicon through a high current pulse. The RF energy is stored in a room-temperature, high-Q 375 ns delay line; it is then extracted out of the line in a short time using the switch. The pulse compression system has achieved a gain of 8, which is the ratio between output and input power.

Recently Hertog, Horowitz, and Maeda (HHM) (hep-th/0310054) have proposed that cosmic censorship can be violated in the AdS/CFT context. They argue that for certain initial data there is insufficient energy available to make a black hole whose horizon is big enough to cloak the singularity that forms. We have investigated this proposal in the models HHM discuss and have thus far been unable to find initial data that provably satisfy this criterion, despite our development of an improved lower bound on the size of the singular region. This is consistent with recent numerical results (hep-th/0402109). For certain initial data, the energies of our configurations are not far above the lower bound on the requisite black hole mass, and so it is possible that in the exact time development naked singularities do form. We go on to argue that the finite radius cut-off AdS_5 situation discussed by HHM displays instabilities when the full 10D theory is considered. We propose an AdS_3 example that may well be free of this instability.

Thin films of Ti-Cr-Al-O are produced for use as an electrical resistor material. The films are rf sputter deposited from ceramic targets using a reactive working gas mixture of Ar and O{sub 2}. Vertical resistivity values from 10{sup 4} to 10{sup 10} Ohm-cm are measured for Ti-Cr-Al-O films. The film resistivity can be design selected through control of the target composition and the deposition parameters. The Ti-Cr-Al-O thin film resistor is found to be thermally stable unlike other metal-oxide films.

None

In-situ x-ray diffraction studies of iron under shock conditions confirm unambiguously a phase change from the bcc ({alpha}) to hcp ({var_epsilon}) structure. Previous identification of this transition in shock-loaded iron has been inferred from the correlation between shock wave-profile analyses and static high-pressure x-ray measurements. This correlation is intrinsically limited because dynamic loading can markedly affect the structural modifications of solids. The in-situ measurements are consistent with a uniaxial collapse along the [001] direction and shuffling of alternate (110) planes of atoms, and in good agreement with large-scale non-equilibrium molecular dynamics simulations.

This paper gives an introduction into the topic of primary ion sources that can be used to feed ions of normally solid elements into EBIS devices. Starting with a set of typical requirements for primary ion sources, some major types of ion generators are discussed first, with emphasis on their working principles rather than trying to give a fully representative listing of used and proposed generators. Beam-transport issues between primary ion source and EBIS are then examined, and generic characteristics of suitable beam-formation and transport systems are explained.

The centrality dependence of the charged multiplicity, transverse energy, and elliptic flow coefficient is studied in a hydrodynamic model, using a variety of different initializations which model the initial energy or entropy production process as a hard or soft process, respectively. While the charged multiplicity depends strongly on the chosen initialization, the p{sub T}-integrated elliptic flow for charged particles as a function of charged particle multiplicity and the p{sub T}-differential elliptic flow for charged particles in minimum bias events turn out to be almost independent of the initialization.

None

To qualify the performance of non-actinic inspection tools, a novel EUV mask inspection system has been installed at the Advanced Light Source (ALS) synchrotron facility at Lawrence Berkeley National Laboratory. Similar to the older generation actinic mask inspection tool, the new system can operate in scanning mode, when mask blanks are scanned for defects using 13.5-nm in-band radiation to identify and map all locations on the mask that scatter a significant amount of EUV light. By modifying and optimizing beamline optics (11.3.2 at ALS) and replacing K-B focusing mirrors with a high quality Schwarzschild illuminator, the new system achieves an order of magnitude improvement on in-band EUV flux density at the mask, enabling faster scanning speed and higher sensitivity to smaller defects. Moreover, the system can also operate in imaging mode, when it becomes a zone-plate-based full-field EUV microscope with spatial resolution better than 100 nm. The microscope utilizes an off-axis setup, making it possible to obtain bright field images over a field-of-view of 5 x 5 {micro}m.