Ultra supercritical (USC) power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy’s Advanced Power Systems Initiatives include coal generation at 60% efficiency, which would require steam temperatures of up to 760°C. This research examines the steamside oxidation of alloys for use in USC systems, with emphasis placed on applications in high- and intermediate-pressure turbines.

We investigated ZnO(0001) single crystals annealed in high vacuum with respect to their magnetic properties and cluster formation tendency after implant-doping with Fe. While metallic Fe cluster formation is suppressed, no evidence for the relevance of the Fe magnetic moment to the observed ferromagnetism was found. The latter along with the cluster suppression is discussed with respect to defects in the ZnO host matrix, since the crystalline quality of the substrates was lowered due to the preparation as observed by x-ray diffraction.

Simulation studies for transmission of microwaves through electron cloudes show good agreement with analytic results. The elctron cloud produces a shift in phase of the microwave. Experimental observation of this phenomena would lead to a useful diagnostic tool for acessing the local density of electron clouds in an accelerator. These experiments are being carried out at the CERN SPS and the PEP-II LER at SLAC and is proposed to be done at the Fermilab maininjector. In this study, a brief analysis of the phase shift is provided and the results are compared with that obtained from simulations.

Scanning tunneling microscopy (STM) was used to study the dissociative adsorption of H{sub 2} on Ru(001) near saturation coverage, when the number of residual hydrogen vacancies (i.e., unoccupied Ru sites) is small. We found that H{sub 2} dissociation takes place only on Ru sites where the metal atom is not bound to any H atom. Such active sites are formed when at least 3 H-vacancies aggregate by thermal diffusion. Sites formed by single H-vacancies or pairs of adjoining vacancies were found to be unreactive toward H{sub 2}. As a similar phenomenon was found previously on Pd(111), the present results indicate that the active sites for H2 dissociation share a common characteristic among catalytically active transition metals.

We give a representation of the parity-even part of the planar two-loop six-gluon MHV amplitude of N = 4 super-Yang-Mills theory, in terms of loop-momentum integrals with simple dual conformal properties. We evaluate the integrals numerically in order to test directly the ABDK/BDS all-loop ansatz for planar MHV amplitudes. We find that the ansatz requires an additive remainder function, in accord with previous indications from strong-coupling and Regge limits. The planar six-gluon amplitude can also be compared with the hexagonal Wilson loop computed by Drummond, Henn, Korchemsky and Sokatchev in arXiv:0803.1466 [hep-th]. After accounting for differing singularities and other constants independent of the kinematics, we find that the Wilson loop and MHV-amplitude remainders are identical, to within our numerical precision. This result provides non-trivial confirmation of a proposed n-point equivalence between Wilson loops and planar MHV amplitudes, and suggests that an additional mechanism besides dual conformal symmetry fixes their form at six points and beyond.

None

Detailed chemical speciation of the dry residue particles from individual cloud droplets and interstitial aerosol collected during the Marine Stratus Experiment (MASE) was performed using a combination of complementary microanalysis techniques. Techniques include computer controlled scanning electron microscopy with energy dispersed analysis of X-rays (CCSEM/EDX), time-of-flight secondary ionization mass spectrometry (TOF-SIMS), and scanning transmission X-ray microscopy with near edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS). Samples were collected at the ground site located in Point Reyes National Seashore, approximately 1 km from the coast. This manuscript focuses on the analysis of individual particles sampled from air masses that originated over the open ocean and then passed through the area of the California current located along the northern California coast. Based on composition, morphology, and chemical bonding information, two externally mixed, distinct classes of sulfur containing particles were identified: chemically modified (aged) sea salt particles and secondary formed sulfate particles. The results indicate substantial heterogeneous replacement of chloride by methanesulfonate (CH3SO3-) and non-sea salt sulfate (nss-SO42-) in sea-salt particles with characteristic ratios of nss-S/Na>0.10 and CH3SO3-/nss-SO42->0.6.

The Gamma-ray Large Area Space telescope (GLAST) is a gamma-ray satellite scheduled for launch in 2008. Before the assembly of the Tracker subsystem of the Large Area Telescope (LAT) science instrument of GLAST, every component (tray) and module (tower) has been subjected to extensive ground testing required to ensure successful launch and on-orbit operation. This paper describes the sequence and results of the environmental tests performed on an engineering model and all the flight hardware of the GLAST LAT Tracker. Environmental tests include vibration testing, thermal cycles and thermal-vacuum cycles of every tray and tower as well as the verification of their electrical performance.

Bisection is one of the most common methods used to compute the eigenvalues of symmetric tridiagonal matrices. Bisection relies on the Sturm count: For a given shift a, the number of negative pivots in the factorization T - {sigma}I = LDL{sup T} equals the number of eigenvalues of T that are smaller than a. In IEEE-754 arithmetic, the value oo permits the computation to continue past a zero pivot, producing a correct Sturm count when T is unreduced. Demmel and Li showed that using oo rather than testing for zero pivots within the loop could significantly improve performance on certain architectures. When eigenvalues are to be computed to high relative accuracy, it is often preferable to work with LDL{sup T} factorizations instead of the original tridiagonal T. One important example is the MRRR algorithm. When bisection is applied to the factored matrix, the Sturm count is computed from LDL{sup T} which makes differential stationary and progressive qds algorithms the methods of choice. While it seems trivial to replace T by LDL{sup T}, in reality these algorithms are more complicated: In IEEE-754 arithmetic, a zero pivot produces an overflow followed by an invalid exception (NaN, or 'Not a Number') that renders …

Progress in science often follows or parallels the development of new techniques. The optical microscope helped convert medicine and biology from a speculative activity in old times to today's sophisticated scientific disciplines. The telescope changed the study and interpretation of heavens from mythology to science. X-ray diffraction enabled the flourishing of solid state physics and materials science. The technique object of this review, Ambient Pressure Photoelectron Spectroscopy or APPES for short, has also the potential of producing dramatic changes in the study of liquid and solid surfaces, particularly in areas such as atmospheric, environment and catalysis sciences. APPES adds an important missing element to the host of techniques that give fundamental information, i.e., spectroscopy and microscopy, about surfaces in the presence of gases and vapors, as encountered in industrial catalysis and atmospheric environments. APPES brings electron spectroscopy into the realm of techniques that can be used in practical environments. Decades of surface science in ultra high vacuum (UHV) has shown the power of electron spectroscopy in its various manifestations. Their unique property is the extremely short elastic mean free path of electrons as they travel through condensed matter, of the order of a few atomic distances in the energy range …

Citric acid forms bidentate, tridentate, binuclear or polynuclear species with transition metals and actinides. Biodegradation of metal citrate complexes is influenced by the type of complex formed with metal ions. While bidentate complexes are readily biodegraded, tridentate, binuclear and polynuclear species are recalcitrant. Likewise certain transition metals and actinides are photochemically active in the presence of organic acids. Although the uranyl citrate complex is not biodegraded, in the presence of visible light it undergoes photochemical oxidation/reduction reactions which result in the precipitation of uranium as UO{sub 3} {center_dot} H{sub 2}O. Consequently, we developed a process where uranium is extracted from contaminated soils and wastes by citric acid. The citric-acid extract is subjected to biodegradation to recover the toxic metals, whereas uranyl citrate which is recalcitrant remains in solution. Photochemical degradation of the uranium citrate complex resulted in the precipitation of uranium. Thus the toxic metals and uranium in mixed waste are recovered in separate fractions for recycling or for disposal. The use of naturally-occurring compounds and the combined chemical and microbiological treatment process is more efficient than present methods and should result in considerable savings in cost.

A detailed chemical kinetic mechanism has been developed to study the oxidation of the straight-chain isomers of hexene over a wide range of operating conditions. The main features of this detailed kinetic mechanism, which includes both high and low temperature reaction pathways, are presented and discussed with special emphasis on the main classes of reactions involved in alkene oxidation. Simulation results have been compared with experimental data over a wide range of operating conditions including shock tube, jet stirred reactor and rapid compression machine. The different reactivities of the three isomers have been successfully predicted by the model. Isomerization reactions of the hexenyl radicals were found to play a significant role in the chemistry and interactions of the three n-hexene isomers. A comparative reaction flux analysis is used to verify and discuss the fundamental role of the double bond position in the isomerization reactions of alkenyl radicals, as well as the impact of the allylic site in the low and high temperature mechanism of fuel oxidation.

A four-cylinder 1.9 Volkswagen TDI Engine has been converted to run in Homogeneous Charge Compression Ignition (HCCI) mode. The stock configuration is a turbocharged direct injection Diesel engine. The combustion chamber has been modified by discarding the in-cylinder Diesel fuel injectors and replacing them with blank inserts (which contain pressure transducers). The stock pistons contain a reentrant bowl and have been retained for the tests reported here. The intake and exhaust manifolds have also been retained, but the turbocharger has been removed. A heater has been installed upstream of the intake manifold and fuel is added just downstream of this heater. The performance of this engine in naturally aspirated HCCI operation, subject to variable intake temperature and fuel flow rate, has been studied. The engine has been run with propane fuel at a constant speed of 1800 rpm. This work is intended to characterize the HCCI operation of the engine in this configuration that has been minimally modified from the base Diesel engine. The performance (BMEP, IMEP, efficiency, etc) and emissions (THC, CO, NOx) of the engine are presented, as are combustion process results based on heat release analysis of the pressure traces from each cylinder.

Sulphate-reducing bacteria are anaerobes readily found in oxic-anoxic interfaces. Multiple defence pathways against oxidative conditions were identified in these organisms and proposed to be differentially expressed under different concentrations of oxygen, contributing to their ability to survive oxic conditions. In this study, Desulfovibrio vulgaris Hildenborough cells were exposed to the highest concentration of oxygen that sulphate-reducing bacteria are likely to encounter in natural habitats, and the global transcriptomic response was determined. 307 genes were responsive, with cellular roles in energy metabolism, protein fate, cell envelope and regulatory functions, including multiple genes encoding heat shock proteins, peptidases and proteins with heat shock promoters. Of the oxygen reducing mechanisms of D. vulgaris only the periplasmic hydrogen-dependent mechanism is up-regulated, involving the [NiFeSe]hydrogenase, formate dehydrogenase(s) and the Hmc membrane complex. The oxidative defence response concentrates on damage repair by metal-free enzymes. These data, together with the down regulation of the Fur operon, which restricts the availability of iron, and the lack of response of the PerR operon, suggest that a major effect of this oxygen stress is the inactivation and/or degradation of multiple metalloproteins present in D. vulgaris as a consequence of oxidative damage to their metal clusters.

An important tool in quark-gluon plasma studies at RHIC has been the measurement of dijets investigated via leading hadron correlations. With much higher rates for hard processes at the Large Hadron Collider, studies of Z{sup 0}-tagged jets become possible. A clear experimental signature is provided by the measurement of muon pairs from the Z{sup 0} decays, for which CMS is an ideally suited detector. Instead of measuring back-to-back correlations of two strongly interacting particles, one side is replaced by an electromagnetic probe which propagates through the plasma undisturbed and provides a measurement of the energy of the initial hard scattering. We propose to use lepton-pair tagged jets to study medium-induced partonic energy loss and to measure in-medium parton fragmentation functions. The lepton pairs from semileptonic decays of heavy meson pairs (B{bar B} and D{bar D}) are a background source for the tagged dilepton-jet signal. We present the calculated signal rates (using PYTHIA) and background rates (using HVQMNR). We also discuss strategies for maximizing the signal-to-background ratio.

In the beam pipe of the positron damping ring of the International Linear Collider (ILC), an electron cloud may be first produced by photoelectrons and ionization of residual gases and then increased by the secondary emission process. This paper reports the assessment of electron cloud effects in a number of configuration options for the ILC baseline configuration. Careful estimates were made of the secondary electron yield (sometimes in the literature also referred as secondary emission yield SEY or {delta}, with a peak value {delta}{sub max}) threshold for electron cloud build-up, and the related single- and coupled-bunch instabilities, as a function of beam current and surface properties for a variety of optics designs. When the configuration for the ILC damping rings was chosen at the end of 2005, the results from these studies were important considerations. On the basis of the joint theoretical and experimental work, the baseline configuration currently specifies a pair of 6 km damping rings for the positron beam, to mitigate the effects of the electron cloud that could present difficulties in a single 6 km ring. However, since mitigation techniques are now estimated to be sufficiently mature, a reduced single 6-km circumference is presently under consideration so …

The targets used in the campaign to achieve fusion ignition at the National Ignition Facility (NIF), the world's largest laser, will be some of the most complex and precise ever built. Key to the success of the campaign is repeatable performance of the targets as components of each experiment. We have developed a target design that will achieve the necessary precision and manufacturability, and will also provide the necessary repeatability while retaining experimental flexibility.

Much evidence has been presented in favor of and against the existence of two distinct populations of quasars, radio-loud and radio-quiet. The SDSS differs from earlier optically selected quasar surveys in the large number of quasars and the targeting of FIRST radio source counterparts as quasar candidates. This allows a qualitatively different approach of constructing a series of samples at different redshifts which are volume-limited with respect to both radio and optical luminosity. This technique avoids any biases from the strong evolution of quasar counts with redshift and potential redshift-dependent selection effects. We find that optical and radio luminosities of quasars detected in both SDSS and FIRST are not well correlated within each redshift shell, although the fraction of radio detections among optically selected quasars remains roughly constant at 10% for z {le} 3.2. The distribution in the luminosity-luminosity plane does not appear to be strongly bimodal. The optical luminosity function is marginally flatter at higher radio luminosities.

The Australian Greenhouse Office contracted with the Collaborative Labeling and Appliance Standards Program (CLASP) for LBNL to compare US and Australian approaches to analyzing costs and benefits of minimum energy performance standards (MEPS). This report compares the approaches for three types of products: household refrigerators and freezers, small electric storage water heaters, and commercial/industrial air conditioners. This report presents the findings of similarities and differences between the approaches of the two countries and suggests changes to consider in the approach taken in Australia. The purpose of the Australian program is to reduce greenhouse gas emissions, while the US program is intended to increase energy efficiency; each program is thus subject to specific constraints. The market and policy contexts are different, with the USA producing most of its own products and conducting pioneering engineering-economic studies to identify maximum energy efficiency levels that are technologically feasible and economically justified. In contrast, Australia imports a large share of its products and adopts MEPS already in place elsewhere. With these differences in circumstances, Australia's analysis approach could be expected to have less analytical detail and still result in MEPS levels that are appropriate for their policy and market context. In practice, the analysis required …

We present preliminary results for the D{sub s} meson spectrum and decay constants in unquenched lattice QCD. Simulations are carried out with 2 + 1 dynamical quarks using gauge configurations generated by the MILC collaboration. We use the ''asqtad'' a{sup 2} improved staggered action for the light quarks, and the clover heavy quark action with the Fermilab interpretation. We compare our spectrum results with the newly discovered 0{sup +} and 1{sup +} states in the D{sub s} system.

Hysteresis in the relation between water saturation and matric potential is generally regarded as a basic aspect of unsaturated porous media. However, the nature of an upper length scale limit for saturation hysteresis has not been previously addressed. Since hysteresis depends on whether or not capillary rise occurs at the grain scale, this criterion was used to predict required combinations of grain size, surface tension, fluid-fluid density differences, and acceleration in monodisperse systems. The Haines number (Ha), composed of the aforementioned variables, is proposed as a dimensionless number useful for separating hysteretic (Ha < 15) versus nonhysteretic (Ha > 15) behavior. Vanishing of hysteresis was predicted to occur for grain sizes greater than 10.4 +- 0.5 mm, for water-air systems under the acceleration of ordinary gravity, based on Miller-Miller scaling and Haines' original model for hysteresis. Disappearance of hysteresis was tested through measurements of drainage and wetting curves of sands and gravels and occurs between grain sizes of 10 and 14 mm (standard conditions). The influence of surface tension was tested through measurements of moisture retention in 7 mm gravel, without and with a surfactant (sodium dodecylbenzenesulfonate (SDBS)). The ordinary water system (Ha = 7) exhibited hysteresis, while the SDBS …

The chances of discovering the Standard Model Higgs boson in Run 2 at the Fermilab Tevatron Collider are discussed. The reach of a search for MSSM Higgs boson and for other Susy particles is also mentioned. The large integrated luminosity potentially offered by the upgraded Tevatron in the years before the start of LHC will make an exciting physics program possible in the next several years. Let aside the luminosity, we can rely now on two much more powerful detectors than in run 1. This is a very real point of strength of the run 2 Tevatron program. The progress of the Tevatron from spring this year has been slow but steady. From this, there is no reason for being pessimistic, but admittedly no particular reason for being optimistic as well. CDF will be able to produce physics quality data early in 2002. After that, data will flow for years and years. We expect to be able to publish the first papers based on the new data in fall 2002.

Spatial channel theory, initially introduced in 1977 by M. L. Williams and colleagues at ORNL, is a powerful tool for shield design optimization. It focuses on so called ''contributon'' flux and current of particles (a fraction of the total of neutrons, photons, etc.) which contribute directly or through their progeny to a pre-specified response, such as a detector reading, dose rate, reaction rate, etc., at certain locations of interest. Particles that do not contribute directly or indirectly to the pre-specified response, such as particles that are absorbed or leak out, are ignored. Contributon fluxes and currents are computed based on combined forward and adjoint transport solutions. The initial concepts were considerably improved by Abu-Shumays, Selva, and Shure by introducing steam functions and response flow functions. Plots of such functions provide both qualitative and quantitative information on dominant particle flow paths and identify locations within a shield configuration that are important in contributing to the response of interest. Previous work was restricted to two dimensional (2-D) x-y rectangular and r-z cylindrical geometries. This paper generalizes previous work to three-dimensional x-y-z geometry, since it is now practical to solve realistic 3-D problems with multidimensional transport programs. As in previous work, new analytic …

None