We examine a double trace deformation of SU(N) Yang-Mills theory which, for large N and large volume, is equivalent to unmodified Yang-Mills theory up to O(1/N{sup 2}) corrections. In contrast to the unmodified theory, large N volume independence is valid in the deformed theory down to arbitrarily small volumes. The double trace deformation prevents the spontaneous breaking of center symmetry which would otherwise disrupt large N volume independence in small volumes. For small values of N, if the theory is formulated on R{sup 3} x S{sup 1} with a sufficiently small compactification size L, then an analytic treatment of the non-perturbative dynamics of the deformed theory is possible. In this regime, we show that the deformed Yang-Mills theory has a mass gap and exhibits linear confinement. Increasing the circumference L or number of colors N decreases the separation of scales on which the analytic treatment relies. However, there are no order parameters which distinguish the small and large radius regimes. Consequently, for small N the deformed theory provides a novel example of a locally four-dimensional pure gauge theory in which one has analytic control over confinement, while for large N it provides a simple fully reduced model for Yang-Mills theory. …

In a fusion reactor based on the Magnetized Target Fusion approach, the permanent power supply has to deliver currents up to a few mega-amperes to the target dropped into the reaction chamber. All the structures situated around the target will be destroyed after every pulse and have to be replaced at a frequency of 1 to 10 Hz. In this paper, an approach based on the use of spherical blanket surrounding the target, and pulsed plasma electrodes connecting the target to the power supply, is discussed. A brief physic analysis of the processes associated with creation of plasma electrodes is discussed.

We propose and analyze a new tool to help solve sparse linear least-squares problems min{sub x} {parallel}Ax-b{parallel}{sub 2}. Our method is based on a sparse QR factorization of a low-rank perturbation {cflx A} of A. More precisely, we show that the R factor of {cflx A} is an effective preconditioner for the least-squares problem min{sub x} {parallel}Ax-b{parallel}{sub 2}, when solved using LSQR. We propose applications for the new technique. When A is rank deficient we can add rows to ensure that the preconditioner is well-conditioned without column pivoting. When A is sparse except for a few dense rows we can drop these dense rows from A to obtain {cflx A}. Another application is solving an updated or downdated problem. If R is a good preconditioner for the original problem A, it is a good preconditioner for the updated/downdated problem {cflx A}. We can also solve what-if scenarios, where we want to find the solution if a column of the original matrix is changed/removed. We present a spectral theory that analyzes the generalized spectrum of the pencil (A*A,R*R) and analyze the applications.

None

Characterizing percolation patterns in unsaturated zones hasposed a greater challenge to numerical modeling investigations thancomparable saturated zone studies, because of the heterogeneous nature ofunsaturated media as well as the great number of variables impactingunsaturated zone flow. This paper presents an integrated modelingmethodology for quantitatively characterizing percolation patterns in theunsaturated zone of Yucca Mountain, Nevada, a proposed undergroundrepository site for storing high-level radioactive waste. It takes intoaccount the multiple coupled processes of air, water, heat flow andchemical isotopic transport in Yucca Mountain s highly heterogeneous,unsaturated fractured tuffs. The modeling approach integrates a widevariety of moisture, pneumatic, thermal, and isotopic geochemical fielddata into a comprehensive three-dimensional numerical model for modelinganalyses. Modeling results are examined against different types offield-measured data and then used to evaluate different hydrogeologicalconceptual models and their results of flow patterns in the unsaturatedzone. In particular, this integration model provides a much clearerunderstanding of percolation patterns and flow behavior through theunsaturated zone, both crucial issues in assessing repositoryperformance. The integrated approach for quantifying Yucca Mountain sflow system is also demonstrated to provide a comprehensive modeling toolfor characterizing flow and transport processes in complex subsurfacesystems.

Energetic oxetane polymers have shown promise as performance-enhancing ingredients in gun and missile propellants. In order to correctly predict the performance of energetic materials containing these polymers, it is important to have accurate, experimentally determined values for the polymer heats of formation ({Delta}H{sub f}). In support of a theoretical study on gun propellant performance, heats of combustion were experimentally determined for a series of oxetane polymers and monomers (see below) using combustion calorimetry, and from these, {Delta}H{sub f} values were calculated. Polymers included BAMO/AMMO, BAMO/NMMO (polyol and TPE), and BNMO/NMMO mixtures. In order to calculate the {Delta}H{sub f} of the polymers from heat of combustion data, a number of assumptions were made regarding the polymer structure and molecular weight. A comparison of the {Delta}H{sub f} values for the monomers and polymers were made, and these values were compared to heats of formation measured elsewhere.

There is renewed interest in the United States (U.S.) to construct new Generation III and III+ reactors within the next decade and Generation IV reactors in the future. Licensing by the U.S. Nuclear Regulatory Commission (NRC) is a significant consideration and these new plants may pose new challenges. One such challenge is the advances in human factors engineering (HFE) methods that are used. These methods are used to design and evaluate the HFE aspects of a plant, such as the human-system interface (HSI). These methods are important because NRC HFE reviews are design process oriented, thus, the criteria are mostly technology neutral with regard to reactor design.[1] However, the HFE review criteria are not neutral with respect to the HFE methods that are used as part of the design process This will be important for new reactor reviews because the diversity of reactor types, HSIs, and operational concepts will increase, especially for Generation III+ and IV plants. Thus the NRC is conducting research to identify advances in HFE methods and to develop additional guidance to address their review.

The dilute GaN{sub x}As{sub 1-x} alloys (with x up to 0.05) have exhibited many unusual properties as compared to the conventional binary and ternary semiconductor alloys. We report on a new effect in the GaN{sub x}As{sub 1-x} alloy system in which electrically active substitutional group IV donors and isoelectronic N atoms passivate each other's activity. This mutual passivation occurs in dilute GaN{sub x}As{sub 1-x} doped with group IV donors through the formation of nearest neighbor IV{sub Ga-}N{sub As} pairs when the samples are annealed under conditions such that the diffusion length of the donors is greater than or equal to the average distance between donor and N atoms. The passivation of the shallow donors and the N{sub As} atoms is manifested in a drastic reduction in the free electron concentration and, simultaneously, an increase in the fundamental band gap. This mutual passivation effect is demonstrated in both Si and Ge doped GaN{sub x}As{sub 1-x} alloys. Analytical calculations of the passivation process based on Ga vacancies mediated diffusion show good agreement with the experimental results.

We present an analysis of inclusive {Omega}{sub c}{sup 0} baryon production and decays in 230.5 fb{sup -1} of data recorded with the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} collider at the Stanford Linear Accelerator Center. {Omega}{sub c}{sup 0} baryons are reconstructed in four final states ({Omega}{sup -}{pi}{sup +}, {Omega}{sup -}{pi}{sup +}{pi}{sup 0}, {Omega}{sup -}{pi}{sup +}{pi}{sup +}{pi}{sup -}, {Xi}{sup -}K{sup -}{pi}{sup +}{pi}{sup +}) and the ratios of branching fractions for these final states are measured. We also measure the momentum spectrum of the {Omega}{sub c}{sup 0} baryons in the e{sup +}e{sup -} center-of-mass frame. From the spectrum, they observe {Omega}{sub c}{sup 0} production from B decays and in c{bar c} events, and extract the two rates of production.

A study of breakdown mechanism has been initiated at the Argonne Wakefield Accelerator (AWA). Breakdown may include several factors such as local field enhancement, explosive electron emission, Ohmic heating, tensile stress produced by electric field, and others. The AWA is building a dedicated facility to test various models for breakdown mechanisms and to determine the roles of different factors in the breakdown. We plan to trigger breakdown events with a high-powered laser at various wavelengths (IR to UV) to determine the role of explosive electron emission in the breakdown process. Another experimental idea follows from the recent work on a Schottky-enabled photoemission in an RF photoinjector [1] that allows us to determine in situ the field enhancement factor on a cathode surface. Monitoring the field enhancement factor before and after the breakdown can shed some light on a number of observations such as the crater formation process.

The Linac Coherent Light Source (LCLS) is a SASE x-ray Free-Electron Laser (FEL) based on the final kilometer of the Stanford Linear Accelerator. One of the most critical diagnostic devices is the bunch length monitor (BLM), which is to be installed right after each compressor utilizing coherent radiation from the last bending magnet. We describe the components and the optical layout of such a BLM. Based on the setup geometry, we discuss some issues about the coherent radiation signal.

The effect of zirconia phase on the activity and selectivityof Cu/ZrO2 for the hydrogenation of CO has been investigated. Relativelypure t-ZrO2 and m-ZrO2 were prepared with high surface areas (~; 145m2/g). Copper was then deposited onto the surface of these materials byeither incipient-wetness impregnation or deposition-precipitation. For afixed Cu surface area, Cu/m-ZrO2 was tenfold more active for methanolsynthesis than Cu/t-ZrO2 from a feed of 3/1 H2/CO at 3.0 MPa andtemperatures between 473 and 523 K. Cu/m-ZrO2 also exhibited a higherselectivity to methanol. Increasing the Cu surface area on m-ZrO2resulted in further improvement in activity with minimal change inselectivity. Methanol productivity increased linearly for both Cu/t-ZrO2and Cu/m-ZrO2 with increasing Cu surface area. The difference in inherentactivity of each phase paralleled the stronger and larger CO adsorptioncapacity of the Cu/m-ZrO2 as quantified by CO-TPD. The higher COadsorption capacity of Cu/m-ZrO2 is attributed to the presence of a highconcentration of anionic vacancies on the surface of m-ZrO2. Suchvacancies expose cus-Zr4+ cations, which act as Lewis acid centers andenhance the Bronsted acidity of adjacent Zr-OH groups. The presence ofcus-Zr4+ sites and adjacent Bronsted acidic Zr-OH groups contributes tothe adsorption of CO as HCOO-Zr groups, which are the initial precursorsto methanol.

Solvation of small and large clusters are studied by simulation, considering a range of solvent-solute attractive energy strengths. Over a wide range of conditions, both for solvation in the Lennard-Jones liquid and in the SPC model of water, it is shown that the mean solvent density varies linearly with changes in solvent-solute adhesion or attractive energy strength. This behavior is understood from the perspective of Weeks theory of solvation [Ann. Rev. Phys. Chem. 2002, 53, 533] and supports theories based upon that perspective.

Recently Hertog, Horowitz, and Maeda (HHM) (hep-th/0310054) have proposed that cosmic censorship can be violated in the AdS/CFT context. They argue that for certain initial data there is insufficient energy available to make a black hole whose horizon is big enough to cloak the singularity that forms. We have investigated this proposal in the models HHM discuss and have thus far been unable to find initial data that provably satisfy this criterion, despite our development of an improved lower bound on the size of the singular region. This is consistent with recent numerical results (hep-th/0402109). For certain initial data, the energies of our configurations are not far above the lower bound on the requisite black hole mass, and so it is possible that in the exact time development naked singularities do form. We go on to argue that the finite radius cut-off AdS_5 situation discussed by HHM displays instabilities when the full 10D theory is considered. We propose an AdS_3 example that may well be free of this instability.

The centrality dependence of the charged multiplicity, transverse energy, and elliptic flow coefficient is studied in a hydrodynamic model, using a variety of different initializations which model the initial energy or entropy production process as a hard or soft process, respectively. While the charged multiplicity depends strongly on the chosen initialization, the p{sub T}-integrated elliptic flow for charged particles as a function of charged particle multiplicity and the p{sub T}-differential elliptic flow for charged particles in minimum bias events turn out to be almost independent of the initialization.

{sup 207}Bi (t{sub 1/2}=32.2 y) was generated by activation of weapons material during a few ''clean'' nuclear tests at the U.S. Western Pacific Proving Grounds of Enewetak and Bikini Atolls. The radionuclides first appeared in the Enewetak environment during 1958 and in the environment of Bikini during 1956. Crater sediments from Bikini with high levels of {sup 207}Bi were analyzed by gamma spectrometry in an attempt to determine the relative concentrations of {sup 208}Bi (t{sup 1/2} = 3.68 x 10{sup 5} y). The bismuth isotopes were probably generated during the ''clean'', 9.3 Mt Poplar test held on 7/12/58. The atom ratio of {sup 208}Bi to {sup 207}Bi (R value) ranges from {approx}12 to over 200 in sections of core sediments from the largest nuclear crater at Bikini atoll. The presence of bismuth in the device is suggested to account for R values in excess of 10.

Corrosion of tubing used in black-liquor recovery boilers is a major concern in all pulp and paper mills. Extensive corrosion in recovery boiler tubes can result in a significant safety and environmental hazard. Considerable plant resources are expended to inspect recovery boiler tubing. Currently, visual and ultrasonic inspections are primarily used during the annual maintenance shutdown to monitor corrosion rates and cracking of tubing. This project is developing guided acoustic waves for use on recovery boiler tubing. The feature of this acoustic technique is its cost-effectiveness in inspecting long lengths of tubes from a single inspection point. A piezoelectric or electromagnetic transducer induces guided waves into the tubes. The transducer detects fireside defects from the cold side or fireside of the tube. Cracking and thinning on recovery boiler tubes have been detected with this technique in both laboratory and field applications.

This paper presents a method of dividing into triangle fans the most common projections of hexahedra from curvilinear meshes, so that they can be volume rendered in hardware.

New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. One of these compositions, SAM1651, is discussed in detail to illustrate the promise of this general class of materials.

The goal of this work was to determine the effects on plutonium isotopic analysis of having plutonium inside of a 0.25 inch thick stainless steel can. To do this, they analyzed plutonium samples with a U-Pu InSpector (which uses a high-resolution gamma-ray detector and the analysis code MGA (Multi Group Analysis)), to determine both the 240-Pu/239-Pu ratio and the years since the plutonium was separated from americium. They analyzed a 1.6 kg plutonium sample that was placed inside of a 0.25 inch can at varying distances (0-2 meters) and count times (10 seconds-30 minutes). In separate experiments, they analyzed 0.4g plutonium sources with stainless-steel thickness' ranging from 0.125 to 1.0 inch. This report will show three effects of having plutonium in a stainless steel can: (1) 240-Pu/240-Pu can be quickly and accurately determined for a 1.6 kg plutonium sample inside of a 0.25 inch thick stainless-steel can, as this thickness of stainless steel acts as a perfect filter to reduce the intense 59 keV gamma peak from 241-Am. (2) The accuracy of determining the plutonium-americium separation date is not effected by 0.25 inch of stainless steel. (3) Both 240-Pu/239-Pu and the americium separation date can be accurately determined for stainless-steel …

To qualify the performance of non-actinic inspection tools, a novel EUV mask inspection system has been installed at the Advanced Light Source (ALS) synchrotron facility at Lawrence Berkeley National Laboratory. Similar to the older generation actinic mask inspection tool, the new system can operate in scanning mode, when mask blanks are scanned for defects using 13.5-nm in-band radiation to identify and map all locations on the mask that scatter a significant amount of EUV light. By modifying and optimizing beamline optics (11.3.2 at ALS) and replacing K-B focusing mirrors with a high quality Schwarzschild illuminator, the new system achieves an order of magnitude improvement on in-band EUV flux density at the mask, enabling faster scanning speed and higher sensitivity to smaller defects. Moreover, the system can also operate in imaging mode, when it becomes a zone-plate-based full-field EUV microscope with spatial resolution better than 100 nm. The microscope utilizes an off-axis setup, making it possible to obtain bright field images over a field-of-view of 5 x 5 {micro}m.

Thin films of Ti-Cr-Al-O are produced for use as an electrical resistor material. The films are rf sputter deposited from ceramic targets using a reactive working gas mixture of Ar and O{sub 2}. Vertical resistivity values from 10{sup 4} to 10{sup 10} Ohm-cm are measured for Ti-Cr-Al-O films. The film resistivity can be design selected through control of the target composition and the deposition parameters. The Ti-Cr-Al-O thin film resistor is found to be thermally stable unlike other metal-oxide films.

An analytical formulation of conductivity bounds by Bergman and Milton is used in a different way to obtain rigorous bounds on the real transport coefficients (electrical conductivity, thermal conductivity, and/or fluid permeability) of a fluid-saturated porous medium. These bounds do not depend explicitly on the porosity, but rather on two formation factors--one associated with the pore space and the other with the solid frame. Hashin-Shtrikman bounds for transport in random polycrystals of porous-material laminates will also be discussed.

The selling of weapons-related nuclear knowledge by Russian scientists for economic gain constitutes a threat to US national security. Some estimate that the number of Russian scientists seeking permanent employment abroad constitute five to ten percent of all researchers who have left the field of science. And, there is concern that those who have left are ''the better minds.'' Moreover, the issue of brain drain concerns not only those who move abroad permanently, but those who still reside in Russia and travel abroad to sell their knowledge. Of particular concern to the US is the potential sale of WMD knowledge by some. To ''mitigate the risk that economic difficulties...might create the temptation for individuals or institutes to sell expertise to countries of proliferation concern and terrorist organizations,'' the Department of Energy launched a Nuclear Cities Initiative (NCI) in 1998 with the goal of creating commercial jobs and economic diversification in the ten closed cities that form the core of Russia's nuclear weapons complex to accommodate the loss of employment in the nuclear weapons industry. However, unless Russia opens access to the areas of its closed cities that are, or could become, involved in commercial activities-while of course carefully controlling access …