The goal of the Castle project was to provide a parallel programming environment that enables the construction of high performance applications that run portably across many platforms. The authors approach was to design and implement a multilayered architecture, with higher levels building on lower ones to ensure portability, but with care taken not to introduce abstractions that sacrifice performance.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Semiweekly newspaper from Lamar University in Beaumont, Texas that includes local, national, and campus news along with advertising.

The low frequency variation in the three dimensional air temperature fields of two reanalyses and two model simulations are described. The data sets used are the monthly mean temperature fields for the NCAR Climate Simulation Model (CSM, Boville and Gent, 1998) 300 year run, a NCAR Community Climate Model version 3 (CCM3, Kiehl et al., 1998) AMIP type simulation, and the NCEPLNCAR and ECMWF (ERA) reanalysis data sets. The variances and correlations are computed for the anomalies from the annual cycle for each data set. In general the reanalyses and models agree fairly well on the structure of the temperature variance. The models tend to have too much variance at the surface compared to the reanalyses. The CSM's poor simulation of the SST in the eastern Pacific leads to a much reduced variance in the Nino3 region. The enhanced variability over land appears to affect the midlatitude simulation of the CSM in that the higher surface variability extends off the east coast of continents. This is not evident in CCM3 and reanalyses where the SSTs are prescribed. At 200 hPa the CCM3 and reanalyses all evince the dumb bell pattern straddling the Equator in the eastern Pacific attributed by Yulaeva …

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

None

A round robin of testing was performed to compare the performance of rotational dynamic mechanical spectrometers being used within the nuclear weapons complex. Principals from Sandia National Laboratories/New Mexico; Lockheed Martin Y12 Plant at Oak Ridge, Tennessee; Los Alamos National Laboratory, New Mexico (polycarbonate only); and Honeywell Federal Manufacturing and Technologies (FM and T), Kansas City, MO, performed identical testing of hydrogen blown polysiloxane S5370 and bisphenol-A polycarbonate. Over an oscillation frequency sweep from 0.01 Hz to 15.9 Hz at 135 C, each site produced shear storage modulus values with standard deviations of less than 5%. The data from Sandia, Y12, and Kansas City agreed to within 4%, while the Los Alamos data differed by as much as 13%. Storage modulus values for a frequency sweep of the S5370 at 35 C had standard deviations between 6% and 8%, and site-to-site agreement averaged 3%. The shear loss modulus values had standard deviations of 5%, 7%, and 52% for the sites participating, while the results differed by 12% on average.

RL30437: Water Quality Initiatives and Agriculture Claudia Copeland Specialist in Resources and Environmental Policy Resources, Science, and Industry Division February 16, 2000 ABSTRACT Agriculture, which has been a relatively minor component of national water quality policies and programs, especially regulatory policies, is currently involved with several recent Administration water quality initiatives. This report provides background on three ongoing initiatives with potential to affect agriculture: the Clean Water Action Plan, the Unified National Animal Feeding Operations Strategy, and implementation of the Total Maximum Daily Load (TMDL) provisions of the Clean Water Act. The report includes a glossary of terms and a chronology of the key deadlines in the initiatives and identifies other CRS reports for additional information. It will be updated as developments warrant. Summary Congress most recently enacted amendments to the nation's water quality law, the Clean Water Act (CWA), in 1987. But national water quality policy has evolved in the intervening years, as a result of implementation of the 1987 amendments and related Administration initiatives intended to fulfill the requirements and meet the goals and objectives of the Act. Agriculture, which has been a relatively minor component of national water quality policies and programs, especially regulatory policies, is now …

In this paper, the authors overview several of the critical materials growth, design and performance issues for nitride-based UV (< 400 nm) LEDs. The critical issue of optical efficiency is presented through temperature-dependent photoluminescence studies of various UV active regions. These studies demonstrate enhanced optical efficiencies for active regions with In-containing alloys (InGaN, AlInGaN). The authors discuss the trade-off between the challenging growth of high Al containing alloys (AlGaN, AlGaInN), and the need for sufficient carrier confinement in UV heterostructures. Carrier leakage for various composition AlGaN barriers is examined through a calculation of the total unconfined carrier density in the quantum well system. They compare the performance of two distinct UV LED structures: GaN/AlGaN quantum well LEDs for {lambda}< 360 nm emission, and InGaN/AlGaInN quantum well LEDs for 370 nm <{lambda}< 390 nm emission.

None

Semiweekly newspaper from Seminole, Texas that includes local, state, and national news along with advertising.

The purpose of the Environmental Management Performance Report (EMPR) is to provide the Department of Energy Richland Operations Office's (DOE-RL's) report of Hanford's Environmental Management (EM) performance by: U. S. Department of Energy, Richland Operations Office, Project Hanford Management Contract (PHMC) through Fluor Hanford, Inc. (FHI) and its subcontractors, Environmental Restoration Contract through Bechtel Hanford, Inc. (BHI), and its subcontractors, and Pacific Northwest National Laboratories (PNNL) for EM and EM Science and Technology (S&T) Mission. This report is a monthly publication that summarizes EM Site performance under RL Operations Office. It is organized by the four sections listed above, with each section containing an Executive Summary and Area Performance Summaries. A listing of what is contained in the sections can be found in the Table of Contents.

None

Weekly newspaper from Wylie, Texas that includes local, state and national news along with advertising.

Semiweekly newspaper from Pawhuska, Oklahoma that includes local, state, and national news along with advertising.

We are attempting to characterize and model the micromechanical response of highly-filled polymers. In this class of materials, the continuous plastic binder used to bond the highly-filled material dominates the observed viscoelastic response. As a result, realistic lifetime analysis of these materials will require a thorough understanding of the contribution of the plastic binder. Laboratory applications of these materials include plastic bonded explosives, propellants, a variety of specialized filled organic materials for stockpile systems, and highly filled epoxy dielectric materials for the National Ignition Facility. We have explored numerous techniques to characterize the local microstructure of plastic bonded explosives. However, insufficient funding was obtained to bring these technologies to maturity, nevertheless our present tool set is significantly better than 2 years ago. We have also made some progress in developing an appropriate micromechanical constitutive modeling framework, based on a finite element method incorporating a cohesive zone model to represent the binder contribution within a Voronoi tesselation mesh structure for the PBX grains. A second modeling approach was used to incorporate analytical micromechanics (generalized self-consistent schemes). However, preliminary theoretical analysis strongly suggested that this approach would be invalid for such extremely high-filled systems like PBX.

At 650 C, Si freely intermixes with Ge in the dome islands causing a reduction in the strain of the islands and an increase in island size. The shape reversal of Ge/Si domes to pyramids is investigated by analysis of the strain and size changes that occur on an island by island basis. This was carried out for anneal times of 0, 20, 40 and 60 minutes. Transition islands were observed consistent with previous work, which are partially domes and partially pyramids. These islands demonstrated a strain gradient, having a slightly lower strain on the side that has transformed to a pyramid. Cross-sectional STEM was then used to show that this strain gradient is associated with a non-uniform Si intermixing in the islands.

Reuse and interoperability are two keywords in the mantra of the modeling and simulation community. In order to achieve these goals, one must be able to capture, express, and manage the context of individual entities, models, and applications. Capturing the context requires having a thorough understanding of what the entity, model, or application was intended to do and is able to do. While many aspects of context are not easily expressible in a format or language that could be understood and managed in a simulation environment, there are some aspects that can be and the authors discuss how these aspects can be represented in a generalized object-oriented framework.

The authors have studied the temperature stability of M41S class siliceous mesoporous materials loaded with carbonaceous material by temperature programmed small-angle X-ray scattering (TPSAXS) techniques. Results show the thermal structural instability of large pore pure silica sieve material with carbonaceous material (such as coal extracts) occluded within the pores of mesoporous 31 {angstrom} M41S materials. Unfilled pore M41S materials do not show thermal-related structural instability.

None

We are developing new software component technology for high-performance parallel scientific computing to address issues of complexity, re-use, and interoperability for laboratory software. Component technology enables cross-project code re-use, reduces software development costs, and provides additional simulation capabilities for massively parallel laboratory application codes. The success of our approach will be measured by its impact on DOE mathematical and scientific software efforts. Thus, we are collaborating closely with library developers and application scientists in the Common Component Architecture forum, the Equation Solver Interface forum, and other DOE mathematical software groups to gather requirements, write and adopt a variety of design specifications, and develop demonstration projects to validate our approach. Numerical simulation is essential to the science mission at the laboratory. However, it is becoming increasingly difficult to manage the complexity of modern simulation software. Computational scientists develop complex, three-dimensional, massively parallel, full-physics simulations that require the integration of diverse software packages written by outside development teams. Currently, the integration of a new software package, such as a new linear solver library, can require several months of effort. Current industry component technologies such as CORBA, JavaBeans, and COM have all been used successfully in the business domain to reduce software development …