Reconciliation report with an ending account balance of $1,076.54 reconciled for the period ending on January 31, 2002.

Yucca Mountain licensing will require estimation of ground motions from probabilistic seismic hazard analyses (PSHA) with annual probabilities of exceedance on the order of 10{sup -6} to 10{sup -7} per year or smaller, which correspond to much longer earthquake return periods than most previous PSHA studies. These long return periods for the Yucca Mountain PSHA result in estimates of ground motion that are extremely high ({approx} 10 g) and that are believed to be physically unrealizable. However, there is at present no generally accepted method to bound ground motions either by showing that the physical properties of materials cannot maintain such extreme motions, or the energy release by the source for such large motions is physically impossible. The purpose of this feasibility study is to examine recorded ground motion and rock property data from nuclear explosions to determine its usefulness for studying the ground motion from extreme earthquakes. The premise is that nuclear explosions are an extreme energy density source, and that the recorded ground motion will provide useful information about the limits of ground motion from extreme earthquakes. The data were categorized by the source and rock properties, and evaluated as to what extent non-linearity in the material has …

In this project we developed a suite of progressive visualization algorithms and a data-streaming infrastructure that enable interactive exploration of scientific datasets of unprecedented size. The methodology aims to globally optimize the data flow in a pipeline of processing modules. Each module reads a multi-resolution representation of the input while producing a multi-resolution representation of the output. The use of multi-resolution representations provides the necessary flexibility to trade speed for accuracy in the visualization process. Maximum coherency and minimum delay in the data-flow is achieved by extensive use of progressive algorithms that continuously map local geometric updates of the input stream into immediate updates of the output stream. We implemented a prototype software infrastructure that demonstrated the flexibility and scalability of this approach by allowing large data visualization on single desktop computers, on PC clusters, and on heterogeneous computing resources distributed over a wide area network. When processing terabytes of scientific data, we have achieved an effective increase in visualization performance of several orders of magnitude in two major settings: (i) interactive visualization on desktop workstations of large datasets that cannot be stored locally; (ii) real-time monitoring of a large scientific simulation with negligible impact on the computing resources available. …

The objective of this LDRD project was to develop one or more models for the production of {beta}-delayed {gamma} rays following neutron-induced fission of a special nuclear material (SNM) and to define a standardized formatting scheme which will allow them to be incorporated into some of the modern, general-purpose Monte Carlo transport codes currently being used to simulate inspection techniques proposed for detecting fissionable material hidden in sea-going cargo containers. In this report, we will describe a Monte Carlo model for {beta}-delayed {gamma}-ray emission following the fission of SNM that can accommodate arbitrary time-dependent fission rates and photon collection histories. The model involves direct sampling of the independent fission yield distributions of the system, the branching ratios for decay of individual fission products and spectral distributions representing photon emission from each fission product and for each decay mode. While computationally intensive, it will be shown that this model can provide reasonably detailed estimates of the spectra that would be recorded by an arbitrary spectrometer and may prove quite useful in assessing the quality of evaluated data libraries and identifying gaps in the libraries. The accuracy of the model will be illustrated by comparing calculated and experimental spectra from the decay …

Experiments have been performed to study the propagation of intense laser pulses to high plasma densities. The issue of self-focusing and filamentation of the laser pulse as well as developing predictive capability of absorption processes and x-ray conversion efficiencies is important for numerous programs at the Laboratory, particularly Laser Program (Fast Ignitor and direct-drive ICF) and D&NT (radiography, high energy backlighters and laser cutting). Processes such as resonance absorption, profile modification, linear mode conversion, filamentation and stimulated Brillouin scattering can occur near the critical density and can have important effects on the coupling of laser light to solid targets. A combination of experiments have been used to study the propagation of laser light to high plasma densities and the interaction physics of intense laser pulses with solid targets. Nonparaxial fluid codes to study nonstationary behavior of filamentation and stimulated Brillouin scattering at high densities have also been developed as part of this project.

Arrays of lasers are often considered when a need exists to increase laser optical output power, for a variety of purposes. Similarly, individual semiconductor laser-diodes, generating 0.01-1.0 W each, are commonly placed in arrays in order to increase total optical power onto targeted objects. Examples of such usage are diode-laser pump arrays for solid-slab heat-capacity lasers, laser arrays for heat-treating materials, and arrays for efficient solid state laser systems. The commercial and defense communities also use such arrays for many applications from laser range-finders, laser designators, to laser machining systems, etc. However, the arraying process does not automatically increase ''focusable'' light on target (i.e., intensity/steradian). For those applications requiring the highest focusability, it is necessary that the collective output beam from arrays of individual lasers be phase-coherent. Under this condition, the individual laser-element optical outputs are ''fused together'' into a larger area, phase coherent (i.e., all wavefronts are ''in step''), high-power combined beam. The process of joining multiple laser beams together to produce a single coherent wave, is in general very difficult and seldom accomplished. Thus joining together many hundreds to thousands of beams from individual laser-diodes, in large arrays, is still an unsolved problem. There are 2 major reasons …

Environmental Surveillance of the Hanford Site and surrounding areas is conducted by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE). Document contains CY03 schedules for the routine collection of samples for the Surface Environmental Surveillance Project (SESP) and Drinking Water Monitoring Project.

Detailed knowledge of how materials respond to strong shocks or other extreme conditions on rapid timescales (such as laser heating) are required to support LLNL missions of national security and stockpile stewardship. This project started in FY01 to develop and demonstrate a new pump-probe characterization capability for investigating ultrafast changes in the chemical and electronic structure of materials under extreme conditions with picosecond time resolution. The LLNL COMET (Compact Multipulse Terawatt) [1] is a compact 15 TW laser facility operating at 1054 nm wavelength, and utilizes the technique of chirped pulse amplification to produce two high power beams at a rate of 1 shot every 4 minutes. A short pulse length varied from 500 fs to 25 ps and a long 600 ps (FWHM) pulse is focused in a high intensity line focus with a traveling wave geometry to generate an intense Ni-like Pd ion 4d-4p x-ray laser (XRL) line at 14.7 nm (84.5 eV). Total energy in the two beams is of order 3-7 J to produce lasing where the peak-to-peak delay between the laser pulses is found to be optimal at 700 ps with the short pulse arriving after the long pulse. Typical COMET x-ray laser characteristics are …

This document examines the potential use of Thomson-Radiated Extreme X-ray (T-REX) sources for Fluorescence Imaging in the Nuclear Domain (FIND) of special nuclear materials. A back-of-the-envelope, relative comparison of T-REX sources vs. Bremsstrahlung sources for this application is presented. It is estimated that use of T-REX for FIND could be as much as 5 x 10{sup 12} more effective than the use of anode based sources. Furthermore it is estimated that illumination of samples of dimension 1 cm on a side could produce up to {approx}10{sup 9} detectable photons per second.

An early warning system to counter bioterrorism, the Autonomous Pathogen Detection System (APDS) continuously monitors the environment for the presence of biological pathogens (e.g., anthrax) and once detected, it sounds an alarm much like a smoke detector warns of a fire. Long before September 11, 2001, this system was being developed to protect domestic venues and events including performing arts centers, mass transit systems, major sporting and entertainment events, and other high profile situations in which the public is at risk of becoming a target of bioterrorist attacks. Customizing off-the-shelf components and developing new components, a multidisciplinary team developed APDS, a stand-alone system for rapid, continuous monitoring of multiple airborne biological threat agents in the environment. The completely automated APDS samples the air, prepares fluid samples in-line, and performs two orthogonal tests: immunoassay and nucleic acid detection. When compared to competing technologies, APDS is unprecedented in terms of flexibility and system performance.

The scope of the project was to conduct experimental and computer modeling studies of the launching, flight characteristics and impacts of thin flyer plates driven by laser ablation under drive conditions where the plate remains a solid and retains its strength. Motivation for the work was to provide the scientific underpinnings for advanced development work on new detonators that will be needed within the next ten years for use in the Laboratory's national security mission. Areas of study were to be coupling of laser energy into the flyer plate during the launch phase, melting and instability growth in the flyer during launch, and an explosive-grain-scale understanding of the shock-to-detonation transition when the flyer plate impacts an explosive target. Knowledge and modeling capability, developed from this study, were to enable us to tailor the launching and acceleration conditions of thin flyer plates to produce an optimum impact for initiating high explosives. Experimental and computational studies of the shock-to-detonation transition were to aid us in developing more efficient initiating explosives for use in future detonators.

This project developed ultrasonic nondestructive evaluation techniques based on guided and bulk waves in multilayered structures using arrays. First, a guided wave technique was developed by preferentially exciting dominant modes with energy in the layer of interest via an ultrasonic array. Second, a bulk wave technique uses Fermat's principle of least time as well as wave-based properties to reconstruct array data and image the multilayered structure. The guided wave technique enables the inspection of inaccessible areas of a multilayered structure without disassembling it. Guided waves propagate using the multilayer as a waveguide into the inaccessible areas from an accessible position. Inspecting multi-layered structures with a guided wave relies on exciting modes with sufficient energy in the layer of interest. Multilayered structures are modeled to determine the possible modes and their distribution of energy across the thickness. Suitable modes were determined and excited by designing arrays with the proper element spacing and frequency. Bulk wave imaging algorithms were developed to overcome the difficulties of multiple reflections and refractions at interfaces. Reconstruction algorithms were developed to detect and localize flaws. A bent-ray algorithm incorporates Fermat's principle to correct time delays in the ultrasonic data that result from the difference in wave speeds …

This document overviews an entirely new approach to determining the composition--the chemical-elemental, isotopic and molecular make-up--of complex, highly structured objects, moreover with microscopic spatial resolution in all 3 dimensions. The front cover depicts the new type of pulsed laser system at the heart of this novel technology under adjustment by Alexis Wynne, and schematically indicates two of its early uses: swiftly analyzing the 3-D composition governed structure of a transistor circuit with both optical and mass-spectrometric detectors, and of fossilized dinosaur and turtle bones high-speed probed by optical detection means. Studying the composition-cued 3-D micro-structures of advanced composite materials and the microscopic scale composition-texture of biological tissues are two near-term examples of the rich spectrum of novel applications enabled by this field-opening analytic tool-set.

The objective of this project was to develop predictive theories for the dispersion and mass transfer coefficients and to measure them in the turbulent fluidization regime, using existing facilities. A second objective was to use our multiphase CFD tools to suggest optimized gasifier designs consistent with aims of Future Gen. We have shown that the kinetic theory based CFD codes correctly compute: (1) Dispersion coefficients; and (2) Mass transfer coefficients. Hence, the kinetic theory based CFD codes can be used for fluidized bed reactor design without any such inputs. We have also suggested a new energy efficient method of gasifying coal and producing electricity using a molten carbonate fuel cell. The principal product of this new scheme is carbon dioxide which can be converted into useful products such as marble, as is done very slowly in nature. We believe this scheme is a lot better than the canceled FutureGen, since the carbon dioxide is safely sequestered.

Revision 0A of this document contains new Appendices C and D. Appendix C contains a re-analysis of the rigid and flexible tanks at the 460 in. liquid level and was motivated by recommendations from a Project Review held on March 20-21, 2006 (Rinker et al Appendix E of RPP-RPT-28968 Rev 1). Appendix D contains the benchmark solutions in support of the analyses in Appendix C.

This report provides information required to be reported annually by the Washington Administrative Code (WAC) 173-303-071 (3)(r)(ii)(F) and (3)(s)(ix) on the treatability studies conducted on the Hanford Site in 2000. These studies were conducted as required by WAC 173-303-071, ?Excluded Categories of Waste,? sections (3)(r) and (s). Unless otherwise noted, the waste samples were provided by and the treatability studies were performed for the U.S. Department of Energy, Richland Operations Office, P.O. Box 550, Richland, Washington 99352. The U.S. Environmental Protection Agency identification number for these studies is WA7890008967.

This document provides findings and recommendations that resulted from an assessment of the Brookhaven National Laboratory by a team from Pacific Northwest National Laboratory to assess the site's potential for various alternative financing options as a means to implement energy-efficiency improvements. The assessment looked for life-cycle cost-effective energy-efficiency improvement opportunities, and through a series of staff interviews, evaluated the various methods by which these opportunities may be financed, while considering availability of funds, staff, and available financing options. This report summarizes the findings of the visit and the resulting recommendations.

This document provides a detailed report on the successful completion of the DOE OFES Theory Milestone for FY2007: Improve the simulation resolution of linear stability properties of Toroidal Alfvén Eigenmodes (TAE) driven by energetic particles and neutral beams in ITER by increasing the numbers of toroidal modes used to 15.

The purpose of this report is to summarize and evaluate the Argonne Distance Tabletop Exercise (DISTEX) method. DISTEX is intended to facilitate multi-organization, multi-objective tabletop emergency response exercises that permit players to participate from their own facility's incident command center. This report is based on experience during its first use during the FluNami 2007 exercise, which took place from September 19-October 17, 2007. FluNami 2007 exercised the response of local public health officials and hospitals to a hypothetical pandemic flu outbreak. The underlying purpose of the DISTEX method is to make tabletop exercising more effective and more convenient for playing organizations. It combines elements of traditional tabletop exercising, such as scenario discussions and scenario injects, with distance learning technologies. This distance-learning approach also allows playing organizations to include a broader range of staff in the exercise. An average of 81.25 persons participated in each weekly webcast session from all playing organizations combined. The DISTEX method required development of several components. The exercise objectives were based on the U.S. Department of Homeland Security's Target Capabilities List. The ten playing organizations included four public health departments and six hospitals in the Chicago area. An extent-of-play agreement identified the objectives applicable to each …

This Nuclear Regulatory Commission (NRC) sponsored study has identified human-performance issues in new and advanced nuclear power plants. To identify the issues, current industry developments and trends were evaluated in the areas of reactor technology, instrumentation and control technology, human-system integration technology, and human factors engineering (HFE) methods and tools. The issues were organized into seven high-level HFE topic areas: Role of Personnel and Automation, Staffing and Training, Normal Operations Management, Disturbance and Emergency Management, Maintenance and Change Management, Plant Design and Construction, and HFE Methods and Tools. The issues where then prioritized into four categories using a 'Phenomena Identification and Ranking Table' methodology based on evaluations provided by 14 independent subject matter experts. The subject matter experts were knowledgeable in a variety of disciplines. Vendors, utilities, research organizations and regulators all participated. Twenty issues were categorized into the top priority category. This Brookhaven National Laboratory (BNL) technical report provides the detailed methodology, issue analysis, and results. A summary of the results of this study can be found in NUREG/CR-6947. The research performed for this project has identified a large number of human-performance issues for new control stations and new nuclear power plant designs. The information gathered in this project …

In 2006, a drilling campaign was conducted at the Project Shoal Area (PSA) to provide information for model validation, emplace long-term monitoring wells, and develop baseline geochemistry for long term hydrologic monitoring. Water levels were monitored in the vicinity of the drilling, in the existing wells HC-1 and HC-6, as well as in the newly drilled wells, MV-1, MV-2 and MV-3 and their associated piezometers. Periodic water level measurements were also made in existing wells HC-2, HC-3, HC-4, HC-5 and HC-7. A lithium bromide chemical tracer was added to drilling fluids during the installation of the monitoring and validation (MV) wells and piezometers. The zones of interest were the fractured, jointed and faulted horizons within a granitic body. These horizons generally have moderate hydraulic conductivities. As a result, the wells and their shallower piezometers required strenuous purging and development to remove introduced drilling fluids as evidenced by bromide concentrations. After airlift and surging well development procedures, the wells were pumped continuously until the bromide concentration was less then 1 milligram per liter (mg/L). Water quality samples were collected after the well development was completed. Tritium scans were preformed before other analyses to ensure the absence of high levels of radioactivity. …

This report documents a detailed buckling evaluation of the primary tanks in the Hanford double-shell waste tanks (DSTs), which is part of a comprehensive structural review for the Double-Shell Tank Integrity Project. This work also provides information on tank integrity that specifically responds to concerns raised by the Office of Environment, Safety, and Health (ES&H) Oversight (EH-22) during a review of work performed on the double-shell tank farms and the operation of the aging waste facility (AWF) primary tank ventilation system. The current buckling review focuses on the following tasks: (1) Evaluate the potential for progressive I-bolt failure and the appropriateness of the safety factors that were used for evaluating local and global buckling. The analysis will specifically answer the following questions: (a) Can the EH-22 scenario develop if the vacuum is limited to -6.6-inch water gage (w.g.) by a relief valve? (b) What is the appropriate factor of safety required to protect against buckling if the EH-22 scenario can develop? (c) What is the appropriate factor of safety required to protect against buckling if the EH-22 scenario cannot develop? (2) Develop influence functions to estimate the axial stresses in the primary tanks for all reasonable combinations of tank loads, …

High energy radiography capabilities are essential for many future DNT/HED experiments on NIF. We have been developing bright, high-energy (15-100 keV), high resolution (< 20 {micro}m), 1-D and 2-D radiography solutions for DNT experiments on NIF. In this LDRD, we have made significant progress utilizing high-energy, high-intensity, short-pulse lasers to generate hard K-{alpha} photons. High energy K-{alpha} sources are created by hot electrons interacting in the target fluor material after irradiation by lasers with intensity I{sub L} > 10{sup 17} W/cm{sup 2}. High resolution point projection 1-D and 2-D radiography have been achieved using {mu}-foil and {mu}-wire targets attached to low-Z substrate materials. The {mu}-wire size was 10 x 10 x 300 {micro}m on a 300 x 300 x 5 {micro}m CH substrate creating the point source size equivalent to these micro targets. This unique technique will utilize the NIF short pulse laser (ARC) as a backlighter suitable for the full range of DNT science experiments on NIF.

This 2002 Facility Work Plan (FWP) has been prepared as required by Module VII, Permit Condition VII.U.3 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Facility Permit, NM4890139088-TSDF (the Permit) (New Mexico Environment Department [NMED], 1999a), and incorporates comments from the NMED received on December 6, 2000 (NMED, 2000a). This February 2002 FWP describes the programmatic facility-wide approach to future investigations at Solid Waste Management Units (SWMU) and Areas of Concern (AOC) specified in the Permit. The Permittees are evaluating data from previous investigations of the SWMUs and AOCs against the most recent guidance proposed by the NMED. Based on these data, and completion of the August 2001 sampling requested by the NMED, the Permittees expect that no further sampling will be required and that a request for No Further Action (NFA) at the SWMUs and AOCs will be submitted to the NMED. This FWP addresses the current Permit requirements. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) specified in Module VII of the Permit, current NMED guidance identifies an Accelerated Corrective Action Approach …