In this thesis, results of neutrino-nucleon neutral current (NC) elastic scattering analysis are presented. Neutrinos interact with other particles only with weak force. Measurement of cross-section for neutrino-nucleon reactions at various neutrino energy are important for the study of nucleon structure. It also provides data to be used for beam flux monitor in neutrino oscillation experiments. The cross-section for neutrino-nucleon NC elastic scattering contains the axial vector form factor G{sub A}(Q{sup 2}) as well as electromagnetic form factors unlike electromagnetic interaction. G{sub A} is propotional to strange part of nucleon spin ({Delta}s) in Q{sup 2} {yields} 0 limit. Measurement of NC elastic cross-section with smaller Q{sup 2} enables us to access {Delta}s. NC elastic cross-sections of neutrino-nucleon and antineutrino-nucleon were measured earlier by E734 experiment at Brookheaven National Laboratory (BNL) in 1987. In this experiment, cross-sections were measured in Q{sup 2} > 0.4 GeV{sup 2} region. Result from this experiment was the only published data for NC elastic scattering cross-section published before our experiment. SciBooNE is an experiment for the measurement of neutrino-nucleon scattering cross-secitons using Booster Neutrino Beam (BNB) at FNAL. BNB has energy peak at 0.7 GeV. In this energy region, NC elastic scattering, charged current elastic scattering, …

A method is presented to simultaneously separate the contributions to a sample of B{sub (s)}{sup 0} {yields} h{sup +}h{sup {prime}-} decays, where h = {pi} or K, and measure the B meson lifetimes in the sample while correcting for the bias in the lifetime distributions due to the hadronic trigger at the CDF experiment. Using 1 fb{sup -1} of data collected at CDF the B{sup 0} lifetime is measured as {tau}{sub B{sup 0}} = 1.558{sub -0.047}{sup +0.050}{sub stat} {+-} 0.028{sub syst} ps, in agreement with the world average measurement. The B{sub s}{sup 0} lifetime in the B{sub s}{sup 0} {yields} K{sup +}K{sup -} decay is measured as {tau}{sub B{sub s}{sup 0} {yields} K{sup +}K{sup -}} = 1.51{sub -0.11}{sup +0.13}{sub stat} {+-} 0.04{sub syst} ps. No difference is observed between the lifetime and other measurements of the average B{sub s}{sup 0} lifetime or the lifetime of the light B{sub s}{sup 0} mass eigenstate determined from B{sub s}{sup 0} {yields} J/{psi}{phi} decays. With the assumptions that B{sub s}{sup 0} {yields} K{sup +}K{sup -} is 100% CP-even and that {tau}{sub B{sub s}{sup 0}} = {tau}{sub B{sup 0}} the width difference in the B{sub s}{sup 0} system is determined as {Delta}{Lambda}{sup CP}/{Lambda} = 0.03{sub …

This thesis describes a measurement of the branching fraction Br(B{sup 0}{sub s} {yields} D{sup (*)}{sub s} D{sup (*)}{sub s}) made using a data sample collected from proton-antiproton collisions at a centre-of-mass energy of 1.96 TeV, corresponding to approximately 1.3 fb{sup -1} of integrated luminosity collected in 2002--2006 by the D0 detector at the Fermilab Tevatron Collider. One D{sup (*)}{sub s} meson was partially reconstructed in the decay D{sub s} {yields} {phi}{mu}{nu}, and the other D{sup (*)}{sub s} meson was identified using the decay D{sub s} {yields} {phi}{pi} where no attempt was made to distinguish D{sub s} and D{sup *}{sub s} states. The resulting measurement is Br(B{sup 0}{sub s} {yields} D{sup (*)}{sub s} D{sup (*)}{sub s}) = 0.039{sup +0.019}{sub -0.017}(stat){sup +0.016}{sub -0.015}(syst). This was subsequently used to estimate the width difference {Delta}{Gamma}{sup CP}{sub s} in the B{sup 0}{sub s}-{anti B}{sup 0}{sub s} system: {Delta}{Gamma}{sup CP}{sub s}/{Gamma}{sub s} = 0.079{sup +0.038}{sub -0.035}(stat){sup +0.031}{sub 0.030}(syst), and is currently one of the most precise estimates of this quantity and consistent with the Standard Model.

This dissertation reports on a study of search for an orbitally excited state of charmed baryons {Sigma}{sub c}{sup 0}(2800) and {Sigma}{sub c}{sup ++}(2800). They measure the widths, momentum spectrum and production cross-section for these states decaying into a {Lambda}{sub c}{sup +} and a charged {pi}. The analysis uses 230 fb{sup -1} of data collected at BABAR detector operating at PEP-II collider at Stanford Linear Accelerator Center. The data is collected in the region of {Upsilon}(4S) an {approx} 40 MeV below the resonance. {Lambda}{sub c}{sup +} baryon is reconstructed in the decay mode pK{sup -}{pi}{sup +}. The {Sigma}{sub c}(2800) baryon production at continuum is observed to be quite significant for x{sub p} > 0.7, where x{sub p} = p/{radical}E{sup 2}+M{sup 2} is the scaled momentum and varies from 0.0 to 1.0. The momentum spectrum is measured by considering the corrected yield for momentum bins above x{sub p} > 0.5 and can be parameterized very well by a Peterson function, given by: dN/dx{sub p} {proportional_to} 1/x{sub p}(1 - 1/x{sub p} - {epsilon}/1-x{sub p}){sup 2}. The values for the peterson parameter {epsilon}, are found to be 0.050 {+-} 0.010 for {Sigma}{sub c}{sup 0}(2800) and 0.057 {+-} 0.012 for {Sigma}{sub c}{sup ++}(2800). They use …

This document describes the measurements of the branching fractions and isospin violations of the radiative electroweak penguin decays B {yields} ({rho}/{omega}){gamma} at the asymmetric-energy e{sup +}e{sup -} PEP-II collider with the BABAR detector. Together with the previously measured branching fractions of the decays B {yields} K*{gamma} the ratio of CKM-matrix elements |V{sub td}/V{sub ts}| are extracted and the length of the far side of the unitarity triangle is determined.

The neutral current neutrino-nucleon elastic interaction {nu} N {yields} {nu} N is a fundamental process of the weak interaction ideally suited for characterizing the structure of the nucleon neutral weak current. This process comprises {approx}18% of neutrino events in the neutrino oscillation experiment, MiniBooNE, ranking it as the experiment's third largest process. Using {approx}10% of MiniBooNE's available neutrino data, a sample of these events were identified and analyzed to determine the differential cross section as a function of the momentum transfer of the interaction, Q{sup 2}. This is the first measurement of a differential cross section with MiniBooNE data. From this analysis, a value for the nucleon axial mass M{sub A} was extracted to be 1.34 {+-} 0.25 GeV consistent with previous measurements. The integrated cross section for the Q{sup 2} range 0.189 {yields} 1.13 GeV{sup 2} was calculated to be (8.8 {+-} 0.6(stat) {+-} 0.2(syst)) x 10{sup -40} cm{sup 2}.

We have measured the top quark mass with the dynamical likelihood method. The data corresponding to an integrated luminosity of 1.7fb{sup -1} was collected in proton antiproton collisions at a center of mass energy of 1.96 TeV with the CDF detector at Fermilab Tevatron during the period March 2002-March 2007. We select t{bar t} pair production candidates by requiring one high energy lepton and four jets, in which at least one of jets must be tagged as a b-jet. In order to reconstruct the top quark mass, we use the dynamical likelihood method based on maximum likelihood method where a likelihood is defined as the differential cross section multiplied by the transfer function from observed quantities to parton quantities, as a function of the top quark mass and the jet energy scale(JES). With this method, we measure the top quark mass to be 171.6 {+-} 2.0 (stat.+ JES) {+-} 1.3(syst.) = 171.6 {+-} 2.4 GeV/c{sup 2}.

We have searched for the Standard Model Higgs boson production in association with a W{sup {+-}} boson. This search is based on the data collected between February 2002 and May 2007, corresponding to an integrated luminosity of 1.9 fb{sup -1} collected by the Collider Detector at Fermilab (CDF) at the Tevatron which is a p{bar p} collider at a center of mass energy 1.96 TeV. W+Higgs channel is one of the most promising channels for the Higgs search at Tevatron in the low Higgs mass region (m{sub H} < 135 GeV/c{sup 2}), where Higgs boson decays into b{bar b} dominantly. The detection of lepton from the W boson decay makes the W+Higgs events much cleaner than the direct Higgs production events which have the largest production cross section. Experimentally we select events with a high p{sub T} lepton, high missing transverse energy and two b-quark jets. This signature is same as for the W+jets background which has a huge cross section. To reduce the W+jets background, b-jet identification algorithms are applied to at least one jet. The expected signal events in 1.9fb{sup -1} are 1.82 {+-} 0.15 and 1.68 {+-} 0.20 for one b-tagged events and two b-tagged events, respectively. …

All known experimental results on fundamental particles and their interactions can be described to great accuracy by a theory called the Standard Model. In the Standard Model of particle physics, the masses of particles are explained through the Higgs mechanism. The Higgs boson is the only Standard Model particle not discovered yet, and its observation or exclusion is an important test of the Standard Model. While the Standard Model predicts that a Higgs boson should exist, it does not exactly predict its mass. Direct searches have excluded a Higgs with m{sub H} < 114.4 GeV at 95% confidence level, while indirect measurements indicate that the mass should be less than 144 GeV. This analysis looks for W{sup {+-}}H {yields} {mu}{nu}{sub {mu}}b{bar b} in 1 fb{sup -1} of data collected with the D0 detector in p{bar p} collisions with {radical}s = 1.96 TeV. The analysis strategy relies on the tracking, calorimetry and muon reconstruction of the D0 experiment. The signature is a muon, missing transverse energy (E{sub T}) to account for the neutrino and two b-jets. The Higgs mass is reconstructed using the invariant mass of the two jets. Backgrounds are W{sup {+-}}b{bar b}, W{sup {+-}} c{bar c}, W{sup {+-}} + …

MINOS (Main Injector Neutrino Oscillation Search), is a long baseline neutrino experiment designed to search for neutrino oscillations using two detectors at Fermi National Accelerator Laboratory, IL (Near Detector) and Soudan, MN (Far Detector). It will study {nu}{sub {mu}} {yields} {nu}{sub {tau}} oscillations and make a measurement on the oscillation parameters, {Delta}m{sub 23}{sup 2} and sin{sup 2} 2{theta}{sub 23}, via a {nu}{sub {mu}} beam made at Fermilab. Charge current neutrino interactions in the MINOS detectors are of three types: quasi-elastic scattering (QEL), resonance scattering (RES) and deep inelastic scattering (DIS). Of these, quasi-elastic scattering leaves the cleanest signal with just one {mu} and one proton in the final state, thus rendering the reconstruction of the neutrino energy more accurate. This thesis will outline a method to separate QEL events from the others in the two detectors and perform a calculation of {Delta}m{sub 23}{sup 2} and sin{sup 2} 2{theta}{sub 23} using those events. The period under consideration was May 2005 to February 2006. The number of observed quasi-elastic events with energies below 10 GeV was 29, where the expected number was 60 {+-} 3. A fit to the energy distribution of these events gives {Delta}m{sub 23}{sup 2} = 2.91{sub -0.53}{sup +0.49}(stat){sub …

To monitor in-flight damage and reduce life-cycle costs associated with CFRP composite aircraft, an autonomous built-in structural health monitoring (SHM) system is preferred over conventional maintenance routines and schedules. This thesis investigates the use of ultrasonic guided waves and piezoelectric transducers for the identification and localization of damage/defects occurring within critical components of CFRP composite aircraft wings, mainly the wing skin-to-spar joints. The guided wave approach for structural diagnostics was demonstrated by the dual application of active and passive monitoring techniques. For active interrogation, the guided wave propagation problem was initially studied numerically by a semi-analytical finite element method, which accounts for viscoelastic damping, in order to identify ideal mode-frequency combinations sensitive to damage occurring within CFRP bonded joints. Active guided wave tests across three representative wing skin-to-spar joints at ambient temperature were then conducted using attached Macro Fiber Composite (MFC) transducers. Results from these experiments demonstrate the importance of intelligent feature extraction for improving the sensitivity to damage. To address the widely neglected effects of temperature on guided wave base damage identification, analytical and experimental analyses were performed to characterize the influence of temperature on guided wave signal features. In addition, statistically-robust detection of simulated damage in a CFRP …

The High Current Experiment (HCX) at Lawrence Berkeley National Laboratory is part of the US program that explores heavy-ion beam as the driver option for fusion energy production in an Inertial Fusion Energy (IFE) plant. The HCX is a beam transport experiment at a scale representative of the low-energy end of an induction linear accelerator driver. The primary mission of this experiment is to investigate aperture fill factors acceptable for the transport of space-charge-dominated heavy-ion beams at high intensity (line charge density {approx}0.2 {micro}C/m) over long pulse durations (4 {micro}s) in alternating gradient focusing lattices of electrostatic or magnetic quadrupoles. This experiment is testing transport issues resulting from nonlinear space-charge effects and collective modes, beam centroid alignment and steering, envelope matching, image charges and focusing field nonlinearities, halo and, electron and gas cloud effects. We present the results for a coasting 1 MeV K{sup +} ion beam transported through ten electrostatic quadrupoles. The measurements cover two different fill factor studies (60% and 80% of the clear aperture radius) for which the transverse phase-space of the beam was characterized in detail, along with beam energy measurements and the first halo measurements. Electrostatic quadrupole transport at high beam fill factor ({approx}80%) is …

Linear elastic fracture mechanics is widely used in industry because it established simple and explicit relationships between the permissible loading conditions and the critical crack size that is allowed in a structure. Stress intensity factors are the above-mentioned functional expressions that relate load with crack size through geometric functions or weight functions. Compliance functions are to determine the crack/flaw size in a structure when optical inspection is inconvenient. As a result, geometric functions, weight functions and compliance functions have been intensively studied to determine the stress intensity factor expressions for different geometries. However, the relations between these functions have received less attention. This work is therefore to investigate the intrinsic relationships between these functions. Theoretical derivation was carried out and the results were verified on single-edge cracked plate under tension and bending. It is found out that the geometric function is essentially the non-dimensional weight function at the loading point. The compliance function is composed of two parts: a varying part due to crack extension and a constant part from the intact structure if no crack exists. The derivative of the compliance function at any location is the product of the geometric function and the weight function at the evaluation …

The Main Injector Neutrino Oscillation Search (MINOS) is a long baseline neutrino oscillation experiment. The MINOS Far Detector, located in the Soudan Underground Laboratory in Soudan MN, has been collecting data since August 2003. The scope of this dissertation involves identifying the atmospheric neutrino induced muons that are created by the neutrinos interacting with the rock surrounding the detector cavern, performing a neutrino oscillation search by measuring the oscillation parameter values of {Delta}m{sub 23}{sup 2} and sin{sup 2} 2{theta}{sub 23}, and searching for CPT violation by measuring the charge ratio for the atmospheric neutrino induced muons. A series of selection cuts are applied to the data set in order to extract the neutrino induced muons. As a result, a total of 148 candidate events are selected. The oscillation search is performed by measuring the low to high muon momentum ratio in the data sample and comparing it to the same ratio in the Monte Carlo simulation in the absence of neutrino oscillation. The measured double ratios for the ''all events'' (A) and high resolution (HR) samples are R{sub A} = R{sub low/high}{sup data}/R{sub low/high}{sup MC} = 0.60{sub -0.10}{sup +0.11}(stat) {+-} 0.08(syst) and R{sub HR} = R{sub low/high}{sup data}/R{sub low/high}{sup MC} …

A measurement of the top quark mass with the matrix element method in the lepton + jets final state in D0 Run II is presented. Events with single isolated energetic charged lepton (electron or muon), exactly four calorimeter jets, and significant missing transverse energy are selected. Probabilities used to discriminate between signal and background are assumed to be proportional to differential cross-sections, calculated using event kinematics and folding in object resolutions and parton distribution functions. The event likelihoods constructed using these probabilities are varied with the top quark mass, m{sub t}, and the jet energy scale, JES, to give the smallest possible combined statistical + JES uncertainty.

This thesis reports the HAPPEX measurement of the parity-violating asymmetry for longitudinally polarized electrons elastically scattered from protons in a liquid hydrogen target. The measurement was carried out in Hall A at Thomas Jefferson National Accelerator Facility using a beam energy E = 3 GeV and scattering angle <θ{sub lab}> = 6◦. The asymmetry is sensitive to the weak neutral form factors from which we extract the strange quark electric and magnetic form factors (G{sup s}{sub E} and G{sup s}{sub M}) of the proton. The measurement was conducted during two data-taking periods in 2004 and 2005. This thesis describes the methods for controlling the helicity-correlated beam asymmetries and the analysis of the raw asymmetry. The parity-violating asymmetry has been measured to be A{sub PV} = −1.14± 0.24 (stat)±0.06 (syst) ppm at <Q{sup 2}> = 0.099 GeV{sup 2} (2004), and A{sub PV} = −1.58±0.12 (stat)±0.04 (syst) ppm at <Q{sup 2}> = 0.109 GeV{sup 2} (2005). The strange quark form factors extracted from the asymmetry are G{sup s}{sub E} + 0.080G{sup s}{sub M} = 0.030 ± 0.025 (stat) ± 0.006 (syst) ± 0.012 (FF) (2004) and G{sup s}{sub E} +0.088G{sup s}{sub M} = 0.007±0.011 (stat)±0.004 (syst)±0.005 (FF) (2005). These results place the …

The CDF experiment has searched for production of a third generation vector leptoquark (VLQ3) in the di-tau plus di-jet channel using 322 pb{sup -1} of Run II data. We review the production and decay theory and describe the VLQ3 model we have used as a benchmark. We study the analysis, including the data sample, triggers, particle identification, and event selection. We also discuss background estimates and systematic uncertainties. We have found no evidence for VLQ3 production and have set a 95% C.L. upper limit on the pair production cross section {sigma} to 344 fb, and exclude VLQ3 in the mass range m{sub VLQ3} &gt; 317 GeV/c{sup 2}, assuming Yang-Mills couplings and Br(LQ3 {yields} b{tau}) = 1. If theoretical uncertainties on the cross section are taken into account, the results are {sigma} &lt; 353 fb and m{sub VLQ3} &gt; 303 GeV/c{sup 2}. For a VLQ3 with Minimal couplings, the upper limit on the cross section is {sigma} &lt; 493 fb ({sigma} &lt; 554 fb) and the lower limit on the mass is m{sub VLQ3} &gt; 251 GeV/c{sup 2} (m{sub VLQ3} &gt; 235 GeV/c{sup 2}) for the nominal (1{sigma} varied) theoretical expectation.

In this work the S-wave component of the K{pi} amplitude from decay of D{sup +} {yields} K{sup -}{pi}{sup +}{pi}{sup +} it is directly measured. The data come from the Fermilab E831/FOCUS experiment. The amplitude measurement is made using the partial wave analysis without any preliminary assumption about the nature of the S-wave component of the K{pi} system. The phase and magnitude of the S-wave amplitude are generic functions to be determined directly through the Dalitz plot fit. For the sake of comparison, our results the same decay is analyzed using the isobar model, which is the standard way to analyze the Dalitz plot. The data fit obtained with the partial wave analysis is better than the data fit from the isobar model. The phase variation with respect to the invariant mass K{pi} is compared with the measurement of the phase {delta}{sub I=1/2}{sup 0} (m{sub K{pi}}) from K{pi} {yields} K{pi} scattering. The difference between both analysis is discussed considering: a difference in the composition of the isospin components I = 1/2 and I = 3/2 of the K{pi} system between D{sup +} decay and the K{pi} {yields} K{pi} scattering; and the final state interaction involving all particles from decay.

As of the development of this thesis, no commercially available products have been identified for the digital communication of instrumented data across a thick ({approx} 6 n.) steel wall using ultrasound. The specific goal of the current research is to investigate the application of methods for digital communication of instrumented data (i.e., temperature, voltage, etc.) across the wall of a steel pressure vessel. The acoustic transmission of data using ultrasonic transducers prevents the need to breach the wall of such a pressure vessel which could ultimately affect its safety or lifespan, or void the homogeneity of an experiment under test. Actual digital communication paradigms are introduced and implemented for the successful dissemination of data across such a wall utilizing solely an acoustic ultrasonic link. The first, dubbed the ''single-hop'' configuration, can communicate bursts of digital data one-way across the wall using the Differential Binary Phase-Shift Keying (DBPSK) modulation technique as fast as 500 bps. The second, dubbed the ''double-hop'' configuration, transmits a carrier into the vessel, modulates it, and retransmits it externally. Using a pulsed carrier with Pulse Amplitude Modulation (PAM), this technique can communicate digital data as fast as 500 bps. Using a CW carrier, Least Mean-Squared (LMS) adaptive …

Experimental, numerical, and analytical work has shown that the response of a shell to a distributed force wave possesses unique characteristics which are dependent on the nature of structure attached to the shell. Specific characteristics which influence the response are the distribution of the discontinuities around the circumference (periodic/aperiodic), the impedance of the discontinuities relative to that of the shell, and the type of impedance (mass or stiffness). Traditional shell theory predicts low frequency, radial-dominated structural mode shapes of a shell with a sinusoidal distribution of displacement amplitudes. Due to the orthogonal nature of these mode shapes, the response of the structure to a traveling radial force wave with sinusoidal content at a given harmonic is due solely to the response of the mode shape with harmonic content of the same order. Introduction of impedance discontinuities to a shell yield complex mode shapes, which may be characterized by the summation of several harmonic components. These modes are no longer orthogonal in the presence of discontinuities, yielding harmonic content across various modal orders. As a result, a purely sinusoidal forcing function can excite several modes of the structure. Structural scattering as discussed in this paper refers to the phenomena in which …

None

Yucca Mountain, Nevada is the proposed site of a geologic repository for the disposal of spent nuclear fuel and high-level radioactive waste in the United States. In the event repository engineered barriers fail, the saturated alluvium located south of Yucca Mountain is expected to serve as a natural barrier to the migration of radionuclides to the accessible environment. The purpose of this study is to improve the characterization of uranium retardation in the saturated zone at Yucca Mountain to support refinement of an assessment model. The distribution of uranium desorption rates from alluvium obtained from Nye County bore holes EWDP-19IM1, EWDP-10SA, EWDP-22SA were studied to address inconsistencies between results from batch sorption and column transport experiments. The alluvium and groundwater were characterized to better understand the underlying mechanisms of the observed behavior. Desorption rate constants were obtained using an activity based mass balance equation and column desorption experiments were analyzed using a mathematical model utilizing multiple sorption sites with different first-order forward and reverse reaction rates. The uranium desorption rate constants decreased over time, suggesting that the alluvium has multiple types of active sorption sites with different affinities for uranium. While a significant fraction of the initially sorbed uranium desorbed …

Sum frequency generation (SFG), a second-order nonlinear optical process, is electric-dipole forbidden in systems with inversion symmetry. As a result, it has been used to study chiral media and interfaces, systems intrinsically lacking inversion symmetry. This thesis describes recent progresses in the applications of and new insights into SFG from chiral media and interfaces. SFG from solutions of chiral amino acids is investigated, and a theoretical model explaining the origin and the strength of the chiral signal in electronic-resonance SFG spectroscopy is discussed. An interference scheme that allows us to distinguish enantiomers by measuring both the magnitude and the phase of the chiral SFG response is described, as well as a chiral SFG microscope producing chirality-sensitive images with sub-micron resolution. Exploiting atomic and molecular parity nonconservation, the SFG process is also used to solve the Ozma problems. Sum frequency vibrational spectroscopy is used to obtain the adsorption behavior of leucine molecules at air-water interfaces. With poly(tetrafluoroethylene) as a model system, we extend the application of this surface-sensitive vibrational spectroscopy to fluorine-containing polymers.

Precision pointing and tracking of laser beams is critical in numerous military and industrial applications. This is particularly true for systems requiring atmospheric beam propagation. Such systems are plagued by environmental influences which cause the optical signal to break up and wander. Example applications include laser communications, precision targeting, active imaging, chemical remote sensing, and laser vibrometry. The goal of this project is to build a beam steering system using a two-axis mirror to maintain precise pointing control. Ultimately, position control to 0.08% accuracy (40 {micro}rad) with a bandwidth of 200 Hz is desired. The work described encompasses evaluation of the instrumentation system and the subsequent design and implementation of an analog electronic controller for a two-axis mirror used to steer the beam. The controller operates over a wide temperature range, through multiple mirror resonances, and is independent of specific mirrors. The design was built and successfully fielded in a Lawrence Livermore National Laboratory free-space optics experiment. All measurements and performance parameters are derived from measurements made on actual hardware that was built and field tested. In some cases, specific design details have been omitted that involve proprietary information pertaining to Lawrence Livermore National Laboratory patent positions and claims. These …