None

None

The Gordon Research Conference (GRC) on CATALYSIS was held at Colby-Sawyer College from 6/23/02 thru 6/28/02. The Conference was well-attended with 118 participants. The attendees represented the spectrum of endeavor in this field coming from academia, industry, and government laboratories, both U.S. and foreign scientists, senior researchers, young investigators, and students.

The Savannah River Site (SRS) must empty the contents of Tank 48H, a 1.3 million gallon Type IIIA HLW storage tank, to return this tank to service. The tank contains organic compounds, mainly potassium tetraphenylborate that cannot be processed downstream until the organic components are destroyed. The THOR{reg_sign} Treatment Technologies (TTT) Fluidized Bed Steam Reforming (FBSR) technology, herein after referred to as steam reforming, has been demonstrated to be a viable process to remove greater than 99.9% of the organics from Tank 48H during various bench scale and pilot scale tests. These demonstrations were supported by Savannah River Remediation (SRR) and the Department of Energy (DOE) has concurred with the SRR recommendation to proceed with the deployment of the FBSR technology to treat the contents of Tank 48H. The Savannah River National Laboratory (SRNL) developed and proved the concept with non-radioactive simulants for SRR beginning in 2003. By 2008, several pilot scale campaigns had been completed and extensive crucible testing and bench scale testing were performed in the SRNL Shielded Cells using Tank 48H radioactive sample. SRNL developed a Tank 48H non-radioactive simulant complete with organic compounds, salt, and metals characteristic of those measured in a sample of the radioactive …

Recent multi-wavelength observations of 3C454.3, in particular during its giant outburst in 2005, put severe constraints on the location of the 'blazar zone', its dissipative nature, and high energy radiation mechanisms. As the optical, X-ray, and millimeter light-curves indicate, significant fraction of the jet energy must be released in the vicinity of the millimeter-photosphere, i.e. at distances where, due to the lateral expansion, the jet becomes transparent at millimeter wavelengths. We conclude that this region is located at {approx} 10 parsecs, the distance coinciding with the location of the hot dust region. This location is consistent with the high amplitude variations observed on {approx} 10 day time scale, provided the Lorentz factor of a jet is {Gamma}{sub j} {approx} 20. We argue that dissipation is driven by reconfinement shock and demonstrate that X-rays and {gamma}-rays are likely to be produced via inverse Compton scattering of near/mid IR photons emitted by the hot dust. We also infer that the largest gamma-to-synchrotron luminosity ratio ever recorded in this object - having taken place during its lowest luminosity states - can be simply due to weaker magnetic fields carried by a less powerful jet.

None

Article on absorption and emission in the Non-Poissonian Case.

Between 1951 and 1992, 928 nuclear tests were conducted at the Nevada Test Site (NTS), including 100 atmospheric and 828 underground tests. Initial public reaction to the tests was largely supportive, but by the late 1950s this began to change, largely as a result of fear of the potential for adverse health effects to be caused by exposure to ionizing radiation resulting from the tests. The nuclear power plant accident at Three Mile Island in 1979 served to heighten these fears, as well as foster a general distrust of the federal agencies involved and low public confidence in monitoring results. Modeled after a similar program that involved the public in monitoring activities around the Three Mile Island nuclear power plant, the Community Environmental Monitoring Program (CEMP) has promoted stakeholder involvement, awareness, and understanding of radiological surveillance in communities surrounding the NTS since 1981. It involves stakeholders in the operation, data collection, and dissemination of information obtained from a network of 29 stations across a wide area of Nevada, Utah, and California. It is sponsored by the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) and administered by the Desert Research Institute (DRI) of the Nevada System …

Detailed Monte Carlo simulations are performed on radiation environment in the LHC IP5 interaction region at the locations of the TOTEM Roman Pots proposed to detect particles produced at very small angles in the elastic scattering and diffraction dissociation processes at the LHC. Radiation loads on these detectors are calculated with the MARS14 code both of the pp-collision origin and beam loss related (beam-gas and tails from collimators).

During the last 50 years, a large amount of information on radionuclide accumulators or ''sentinel-type'' organisms in the environment has been published. Much of this work focused on the risks of food-chain transfer of radionuclides to higher organisms such as reindeer and man. However, until the 1980's and 1990's, there has been little published data on the radiocesium ({sup 134}Cs and {sup 137}Cs) accumulation by mushrooms. This presentation will consist of a review of the published data for {sup 134,137}Cs accumulation by mushrooms in nature. This review will discuss the aspects that promote {sup 134,137}Cs uptake by mushrooms and focus on mushrooms that demonstrate a large propensity for use in the environmental biomonitoring of radiocesium contamination. It will also provide descriptions of habitats for many of these mushrooms and discuss on how growth media and other conditions relate to Cs accumulation.

Iron spectra have been recorded from plasmas created at three different laser plasma facilities, the Tor Vergata University laser in Rome (Italy), the Hercules laser at ENEA in Frascati (Italy), and the Compact Multipulse Terawatt (COMET) laser at LLNL in California (USA). The measurements provide a means of identifying dielectronic satellite lines from FeXVI and FeXV in the vicinity of the strong 2p {yields} 3d transitions of FeXVII. About 80 {Delta}n {ge} 1 lines of FeXV (Mg-like) to FeXIX (O-like) were recorded between 13.8 to 17.1 {angstrom} with a high spectral resolution ({lambda}/{Delta}{lambda} {approx} 4000), about thirty of these lines are from FeXVI and FeXV. The laser produced plasmas had electron temperatures between 100 to 500 eV and electron densities between 10{sup 20} to 10{sup 22} cm{sup -3}. The Hebrew University Lawrence Livermore Atomic Code (HULLAC) was used to calculate the atomic structure and atomic rates for FeXV to FeXIX. HULLAC was used to calculate synthetic line intensities at T{sub e} = 200 eV and n{sub e} = 10{sup 21}cm{sup -3} for three different conditions to illustrate the role of opacity: optically thin plasmas with no excitation-autoionization/dielectronic recombination (EA/DR) contributions to the line intensities, optically thin plasmas that included EA/DR …

Building geometry is essential to any simulation of building performance. This paper examines the importing of building geometry into simulation of energy performance from the users' point of view. It lists performance requirements for graphic user interfaces that input building geometry, and discusses the basic options in moving from two- to three-dimensional definition of geometry and the ways to import that geometry into energy simulation. The obvious answer lies in software interoperability. With the BLIS group of interoperable software one can interactively import building geometry from CAD into EnergyPlus and dramatically reduce the effort otherwise needed for manual input.The resulting savings may greatly increase the value obtained from simulation, the number of projects in which energy performance simulation is used, and expedite decision making in the design process.

The APS linac modulators provide DC pulses to Thales 35/45-MW klystrons. The modulators are pulse forming network (PFN)-type pulsers with EMI 40-kV switch-mode charging supplies. The PFN consists of two 8-cell lines connected in parallel. EEV CX1836A thyratrons are used as discharge switches. The PSpice simulation of the modulators using OrCAD release 9.1 made it possible to find appropriate parameters of RC circuits that reduce high-frequency ringing of the pulse transformer primary voltage. In order to improve pulse top flatness (originally {+-}3%), new coils were built and installed. The coils allow discrete tuning of pulse waveforms by changing the amount of used turns. The advantage of two parallel-line PFN configurations was also used. An equivalent method using a low-voltage generator was used for PFN fine tuning.

Building public trust and confidence through openness is a goal of the DOE Carlsbad Field Office for the Waste Isolation Pilot Plant (WIPP). The objective of the virtual document described in this paper is to give the public an overview of the waste characterization steps, an understanding of how waste characterization instrumentation works, and the type and amount of data generated from a batch of drums. The document is intended to be published on a web page and/or distributed at public meetings on CDs. Users may gain as much information as they desire regarding the transuranic (TRU) waste characterization program, starting at the highest level requirements (drivers) and progressing to more and more detail regarding how the requirements are met. Included are links to: drivers (which include laws, permits and DOE Orders); various characterization steps required for transportation and disposal under WIPP's Hazardous Waste Facility Permit; physical/chemical basis for each characterization method; types of data produced; and quality assurance process that accompanies each measurement. Examples of each type of characterization method in use across the DOE complex are included. The original skeleton of the document was constructed in a PowerPoint presentation and included descriptions of each section of the waste …

Time-resolved soft x-ray photoelectron spectroscopy is used to probe the non-steady-state evolution of the valence band electronic structure of laser heated ultra-thin (50 nm) metal foils and bulk semiconductors. Single-shot soft x-ray laser induced time-of-flight photoelectron spectroscopy with picosecond time resolution was used in combination with optical measurements of the disassembly dynamics that have shown the existence of a metastable liquid phase in fs-laser heated metal foils persisting 4-5 ps. This metastable phase is studied using a 527 nm wavelength 400 fs laser pulse containing 0.3-2.5 mJ laser energy focused in a large 500 x 700 {micro}m{sup 2} spot to create heated conditions of 0.2-1.8 x 10{sup 12} W cm{sup -2} intensity. The unique LLNL COMET compact tabletop soft x-ray laser source provided the necessary high photon flux, highly monoenergetic, picosecond pulse duration, and coherence for observing the evolution of changes in the valence band electronic structure of laser heated metals and semiconductors with picosecond time resolution. This work demonstrates the continuing development of a powerful new technique for probing reaction dynamics and changes of local order on surfaces on their fundamental timescales including phenomena such as non-thermal melting, chemical bond formation, intermediate reaction steps, and the existence of transient …

The morphology of Si{sub 1-Y} Ge{sub Y}:H films in the range of Y=0.23 to 0.9 has been studied by AFM. The films were deposited by Low Frequency (LF) PE CVD at substrate temperature T{sub s}=300 C and discharge frequency f=110 kHz from silane+germane mixture with and without, Ar and H{sub 2} dilution. The films were deposited on silicon and glass substrates. AFM images were taken and analyzed for 2 x 2 mm{sup 2} area. All the images demonstrated ''grain'' like structure, which was characterized by the height distribution function F(H) average roughness <H>, standard height deviation Rq, lateral correlation length L{sub c} area distribution function F(s), mean grain area <s>, diameter distribution function F(d), and mean grain diameter <d>. The roughness <H> of the films monotonically increases with Y for all dilutions, but more significantly in the films deposited without dilution. L{sub c} continuously grows with Y in the films deposited without dilution, while more complex behavior L{sub c}(Y) is observed in the films deposited with H- or Ar dilution. The sharpness of F(H) characterized by curtosis {gamma} depends on dilution and the sharpest F(H) are for the films deposited with Ar ({gamma}=5.30,Y=0.23) and without dilution ({gamma}=4.3, Y=0.45). Isothermal annealing …

Assessment of the long-term performance of nuclear melt glass under saturated conditions provides insight into factors controlling radionuclide release into groundwater. Melt glass samples were collected from an underground nuclear detonation cavity at the Nevada Test Site that was in contact with groundwater for more than 10 years. The samples were made into thin sections and the distribution of alpha activity mapped using CR-39 plastic detectors. The melt glass is visually heterogeneous and the results of the alpha track radiography indicate that the highest alpha activity is associated with areas of dark colored glass. Analyses of the thin sections by alpha spectrometry show the prominent actinide species to be {sup 238}Pu, {sup 239}Pu and {sup 241}Am. Scanning electron microprobe analysis of the bulk glass shows conspicuous alteration layers lining internal vesicle surfaces in the glass. X-ray diffraction patterns for the alteration phases are consistent with clay mineral compositions. Glass dissolution models indicate these layers are too thick to have formed at ambient temperatures over the 10 year period in which they remained in a saturated environment. This implies the alteration layers likely formed at temperatures higher than ambient during cooling of the cavity following the underground detonation. Mobilization of this …

The geometric structure of the alpha-Ga(010)-(1x1) room temperature structure and its (2rt2xrt2) R45 degrees reconstruction below 232 K have been determined using Low Energy Electron Diffraction (LEED) structure analysis. The room temperature structure conforms to the cut-dimer model, forming a two-dimensional metallic structure with only minimal lateral displacements of the atoms. The topmost interlayer distance is 1.53 Angstrom, corresponding to a spacing expansion of 2 percent from the bulk. In the low-temperature structure, the surface atoms shift to dimerize within the top two layers, resulting in a network of mostly covalent bonds, which form both parallel and perpendicular to the surface plane. The bond lengths of some of these dimers are about 10 percent shorter than the bond length found in the alpha-Ga bulk and are thus shorter than any Ga-Ga bonds reported so far.

The coplanar-grid as well as other electron-only detection techniques are effective in overcoming some of the material problems of CdZnTe and, consequently, have led to efficient gamma-ray detectors with good energy resolution while operating at room temperature. The performance of these detectors is limited by the degree of uniformity in both electron generation and transport. Despite recent progress in the growth of CdZnTe material, small variations in these properties remain a barrier to the widespread success of such detectors. Alpha-particle response characterization of CdZnTe crystals fabricated into simple planar detectors is an effective tool to accurately study electron generation and transport. We have used a finely collimated alpha source to produce two-dimensional maps of detector response. A clear correlation has been observed between the distribution of precipitates near the entrance contact on some crystals and their alpha-response maps. Further studies are ongoing to determine the mechanism for the observed response variations and the reason for the correlation. This paper presents the results of these studies and their relationship to coplanar-grid gamma-ray detector performance.

The Saltstone Facility at Savannah River Site (SRS) was originally segmented into two segments: the Saltstone Production Facility (SPF) and the Saltstone Disposal Facility (SDF). Based on the inventory of radionuclides available for release the SPF and SDF were categorized as Nonreactor Hazard Category (HC)-3. The hazard categorization recognized the SDF will contain contributions of radionuclides which would exceed the HC-2 Threshold Quantity (TQ) in the form of grout. However it was determined not to impact the facility hazard categorization based on the grout being in a solid, monolithic form which was not easily dispersible. But, the impact of a quantity of unset grout expected to be present at the vault following operation of the process was not addressed. A Potential Inadequacy in Safety Analysis (PISA) was later issued based on the hazard categorization determination for the facility not addressing unset grout. This initiated a re-evaluation of the accident scenarios within the hazards analysis. During this re-evaluation, the segmentation of the facility was challenged based on the potential interaction between facility segments; specifically, the leachate return line and the grout transfer line, which were considered separate segments, are located in close proximity at one point. such that for certain events …

This paper presents a study of the relationship betweenpermeability and effective stress in tight petroleum reservoirformations. Specifically, a quantitative method is developed to describethe correlation between permeability and effective stress, a method basedon the original in situ reservoir effective stress rather than ondecreased effective stress during development. The experimental resultsshow that the relationship between intrinsic permeability and effectivestress in reservoirs in general follows a quadratic polynomial functionalform, found to best capture how effective stress influences formationpermeability. In addition, this experimental study reveals that changesin formation permeability, caused by both elastic and plasticdeformation, are permanent and irreversible. Related pore-deformationtests using electronic microscope scanning and constant-rate mercuryinjection techniques show that while stress variation generally has smallimpact onrock porosity, the size and shape of pore throats have asignificant impact on permeability-stress sensitivity. Based on the testresults and theoretical analyses, we believe that there exists a cone ofpressure depression in the area near production within suchstress-sensitive tight reservoirs, leading to a low-permeability zone,and that well production will decrease under the influence of stresssensitivity.

Modular structure is ubiquitous in real-world complex networks, and its detection is important because it gives insights in the structure-functionality relationship. The standard approach is based on the optimization of a quality function, modularity, which is a relative quality measure for a partition of a network into modules. Recently some authors have pointed out that the optimization of modularity has a fundamental drawback: the existence of a resolution limit beyond which no modular structure can be detected even though these modules might have own entity. The reason is that several topological descriptions of the network coexist at different scales, which is, in general, a fingerprint of complex systems. Here we propose a method that allows for multiple resolution screening of the modular structure. The method has been validated using synthetic networks, discovering the predefined structures at all scales. Its application to two real social networks allows to find the exact splits reported in the literature, as well as the substructure beyond the actual split.

Flow evolution models were developed to evaluate the performance of the new advanced design mixer pump for sludge mixing and removal operations with high-velocity liquid jets in one of the large-scale Savannah River Site waste tanks, Tank 18. This paper describes the computational model, the flow measurements used to provide validation data in the region far from the jet nozzle, the extension of the computational results to real tank conditions through the use of existing sludge suspension data, and finally, the sludge removal results from actual Tank 18 operations. A computational fluid dynamics approach was used to simulate the sludge removal operations. The models employed a three-dimensional representation of the tank with a two-equation turbulence model. Both the computational approach and the models were validated with onsite test data reported here and literature data. The model was then extended to actual conditions in Tank 18 through a velocity criterion to predict the ability of the new pump design to suspend settled sludge. A qualitative comparison with sludge removal operations in Tank 18 showed a reasonably good comparison with final results subject to significant uncertainties in actual sludge properties.

We extend our earlier model for Rayleigh-Taylor and Richtmyer-Meshkov instabilities to the more general class of hydrodynamic instabilities driven by a time-dependent acceleration g(t) . Explicit analytic solutions for linear as well as nonlinear amplitudes are obtained for several g(t)'s by solving a Schroedinger-like equation d{sup 2}{eta}/dt{sup 2} - g(t)kA{eta} = 0 where A is the Atwood number and k is the wavenumber of the perturbation amplitude {eta}(t). In our model a simple transformation k {yields} k{sub L} and A {yields} A{sub L} connects the linear to the nonlinear amplitudes: {eta}{sup nonlinear} (k,A) {approx} (1/k{sub L})ln{eta}{sup linear} (k{sub L}, A{sub L}). The model is found to be in very good agreement with direct numerical simulations. Bubble amplitudes for a variety of accelerations are seen to scale with s defined by s = {integral} {radical}g(t)dt, while spike amplitudes prefer scaling with displacement {Delta}x = {integral}[{integral}g(t)dt]dt.