Reconciliation report with an ending account balance of $454.75 reconciled for the period ending on July 14, 2001.

Reconciliation report with an ending account balance of $454.75 reconciled for the period ending on July 14, 2001.

A proposed stave design for the D0 Run IIb silicon tracker outer layers featuring central cooling channels and a composite shell mechanical structure is evaluated for self-deflection and deflection due to external loads. This paper contains an introduction to the stave structure, a section devoted to composite lamina and laminate properties and finally a section discussing the beam deflections expected for assembled staves using these laminates.

Our goal is to improve geophysical imaging of the vadose zone. We will achieve this goal by providing new methods to improve interpretation of field data. The purpose of this EMSP project is to develop relationships between laboratory measured geophysical properties and porosity, saturation, and fluid distribution, for partially saturated soils. Algorithms for relationships between soil composition, saturation, and geophysical measurements will provide new methods to interpret geophysical field data collected in the vadose zone at sites such as Hanford, WA.

Experiments have been performed to study the propagation of intense laser pulses to high plasma densities. The issue of self-focusing and filamentation of the laser pulse as well as developing predictive capability of absorption processes and x-ray conversion efficiencies is important for numerous programs at the Laboratory, particularly Laser Program (Fast Ignitor and direct-drive ICF) and D&NT (radiography, high energy backlighters and laser cutting). Processes such as resonance absorption, profile modification, linear mode conversion, filamentation and stimulated Brillouin scattering can occur near the critical density and can have important effects on the coupling of laser light to solid targets. A combination of experiments have been used to study the propagation of laser light to high plasma densities and the interaction physics of intense laser pulses with solid targets. Nonparaxial fluid codes to study nonstationary behavior of filamentation and stimulated Brillouin scattering at high densities have also been developed as part of this project.

In a thick-liquid protected chamber design, such as HYLIFE-II, a molten-salt is used to attenuate neutrons and protect the chamber structures from radiation damage. The molten-salt absorbs some of the material and energy given off by the target explosion. In the case of a fast ignition inertial fusion system, advanced targets have been proposed that may be Self-sufficient in the tritium breeding (i.e., the amount of tritium bred in target exceeds the amount burned). These ''tritium-lean'' targets contain approximately 0.5% tritium and 99.5% deuterium, but require a large pr of 10-20 g/cm{sup 2}. Although most of the yield is provided by D-T reactions, the majority of fusion reactions are D-D, which produces a net surplus of tritium. This aspect allows for greater freedom when selecting a liquid for the protective blanket (lithium-bearing compounds are not required). This study assesses characteristics of many single, binary, and ternary molten-salts. Using the NIST Properties of Molten Salts Database, approximately 4300 molten-salts were included in the study [1]. As an initial screening, salts were evaluated for their safety and environmental (S&E) characteristics, which included an assessment of waste disposal rating, contact dose, and radioactive afterheat. Salts that passed the S&E criteria were then evaluated …

A Working Group Meeting on Heavy Vehicle Aerodynamic Drag was held at Lawrence Livermore National Laboratory on March 28 and 29, 2001. The purpose of the meeting was to present and discuss technical details on the experimental and computational work in progress and future project plans. Due to the large participation from industry and other research organizations, a large portion of the meeting (all of the first day and part of the second day) was devoted to the presentation and discussion of industry's perspective and work being done by other organizations on the demonstration of commercial software and the demonstration of a drag reduction device. This report contains the technical presentations (viewgraphs) delivered at the Meeting, briefly summarizes the comments and conclusions, and outlines the future action items.

A proposed stave design for the D0 Run IIb silicon tracker outer layers featuring central cooling channels and hybrid substrates mounted directly to the silicon sensor surfaces is evaluated for heat transfer characteristics and thermal deflections. In order to control leakage current noise in the silicon it is necessary to maintain the silicon in Layer 2 (R {approx} 100mm) at or below +5C. The current cooling system using 30% ethylene glycol in water can deliver coolant to the inlet of the silicon tracker at a temperature of -8C to -10C. This paper also investigates some alternative coolant options for Run IIB. While these are not required for the outer layers of silicon, they may be needed for L0, which sits at R {approx} 15mm. In this case the silicon must be kept at or below -5C, very near the lower limit for delivery of 30% glycol/water coolant. However, for the inner layers the electronics will be mounted independently from the silicon so the local heat flux is greatly reduced. This paper does not consider the cooling issues for the inner layers.

The authors describe AMRH results on a version of the Reinicke problem specified by the V and V group of LLNL's A-Div. The simulation models a point explosion with heat conduction. The problem specification requires that the heat conduction be replaced with diffusive radiation transport. The matter and radiation energy densities are tightly coupled.

This report describes work to examine the gas generation behavior of actual K East (KE) Basin floor, pit and canister sludge. Mixed and unmixed and fractionated KE canister sludge were tested, along with floor and pit sludges from areas in the KE Basin not previously sampled. The first report in this series focused on gas generation from KE floor and canister sludge collected using a consolidated sampling technique. The third report will present results of gas generation testing of irradiated uranium fuel fragments with and without sludge addition. The path forward for management of the K Basin Sludge is to retrieve, ship, and store the sludge at T Plant until final processing at some future date. Gas generation will impact the designs and costs of systems associated with retrieval, transportation and storage of sludge.

This document describes the source area for the blowing dust encountered in the southwest portion of the 200 West Area. Strategies for short-term stabilization of the entire source area, short-term stabilization of a portion of the source area based on levels of respirable dust, and long-term stabilization of the entire source area are provided. An separate evaluation of aerosolized water as a means of reducing airborne dust is also provided.

The scope of the project was to conduct experimental and computer modeling studies of the launching, flight characteristics and impacts of thin flyer plates driven by laser ablation under drive conditions where the plate remains a solid and retains its strength. Motivation for the work was to provide the scientific underpinnings for advanced development work on new detonators that will be needed within the next ten years for use in the Laboratory's national security mission. Areas of study were to be coupling of laser energy into the flyer plate during the launch phase, melting and instability growth in the flyer during launch, and an explosive-grain-scale understanding of the shock-to-detonation transition when the flyer plate impacts an explosive target. Knowledge and modeling capability, developed from this study, were to enable us to tailor the launching and acceleration conditions of thin flyer plates to produce an optimum impact for initiating high explosives. Experimental and computational studies of the shock-to-detonation transition were to aid us in developing more efficient initiating explosives for use in future detonators.

This document overviews an entirely new approach to determining the composition--the chemical-elemental, isotopic and molecular make-up--of complex, highly structured objects, moreover with microscopic spatial resolution in all 3 dimensions. The front cover depicts the new type of pulsed laser system at the heart of this novel technology under adjustment by Alexis Wynne, and schematically indicates two of its early uses: swiftly analyzing the 3-D composition governed structure of a transistor circuit with both optical and mass-spectrometric detectors, and of fossilized dinosaur and turtle bones high-speed probed by optical detection means. Studying the composition-cued 3-D micro-structures of advanced composite materials and the microscopic scale composition-texture of biological tissues are two near-term examples of the rich spectrum of novel applications enabled by this field-opening analytic tool-set.

The collateral damage caused by fallout from shallow-buried nuclear devices is of considerable interest. In this paper, we present results for ''standard'' calculations using the KDFOC4 fallout computer code. Results are presented for a parametric range of yields from 0.1 kt to 1 Mt in equally-spaced logarithmic increments and for emplacement depths of 5 meters in hard, dry rock and 20 meters in moist soil. We will see that for low yields, this emplacement depth has a marked influence on the shape of the fallout patterns but for the highest yields, the fallout patterns are insensitive to the emplacement medium and depth. We look at two categories of doses: (1) Those for which health effects begin to be serious and range upward to lethal, and (2) Doses that are politically very sensitive but for which any deleterious health effects are difficult to prove.

This note will tabulate the desired phase and delay offsets for a Stacktail Momentum beam transfer function measurement as a function of beam energy and pickup leg. These phase and delay offsets were computed from beam transfer functions made around April 14, 2000. The StackTail system with these offsets will have a gain slope of about 10 MeV.

An assessment of the potential energy savings associated with the use of full-spectrum polarized lighting in a work space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual mail processing/office work area provided the capability of evaluating the technologies effectiveness in the real world.

This report provides information required to be reported annually by the Washington Administrative Code (WAC) 173-303-071 (3)(r)(ii)(F) and (3)(s)(ix) on the treatability studies conducted on the Hanford Site in 2000. These studies were conducted as required by WAC 173-303-071, ?Excluded Categories of Waste,? sections (3)(r) and (s). Unless otherwise noted, the waste samples were provided by and the treatability studies were performed for the U.S. Department of Energy, Richland Operations Office, P.O. Box 550, Richland, Washington 99352. The U.S. Environmental Protection Agency identification number for these studies is WA7890008967.

An assessment of the potential energy savings associated with the use of multi-layer light polarizing panels in an office space was initiated as part of the Department of Energy's (DOE) Federal Energy Management Program (FEMP) New Technology Demonstration Program (NTDP) in 1997. This project was intended to provide information on the effectiveness and application of this technology that could help federal energy managers and other interested individuals determine whether this technology had benefits for their occupied spaces. The use of an actual working office area provided the capability of evaluating the technology's effectiveness in the real world.

To assist in the characterization of microstructural changes associated with irradiation damage in low alloy steels, the technique of quantitative x-ray mapping using a field emission gun scanning transmission electron microscope (FEG-STEM) equipped with an x-ray energy Dispersive spectrometer (XEDS) has been employed. Quantitative XEDS microanalyses of the matrix and grain boundaries of irradiated specimens have been compared with previous quantitative analyses obtained using 3D-Atom Probe Field-Ion Microscopy (3D-APFIM). In addition, the FEG-STEM XEDS maps obtained from the irradiated steel have revealed the presence of 2 to 3 nm Ni-enriched 'precipitates' in the matrix, which had previously been detected using 3D-APFIM. These quantitative FEG-STEM XEDS results represent the first direct and independent microchemical corroboration of the 3D-APFIM results showing ultra-fine irradiation-induced hardening features in low alloy steel.

Developed equipment consisted of a high magnetic field solenoid with supporting instrumentation for electron plasma confinement. The solenoid was designed and delivered in year 1. In year 2, it was mapped and the trap was created and commissioned. In parallel, an ongoing program of beam-plasma interaction studies was carried out with a lower field trap developed earlier. The trap was placed in the IUCF Coolor (an intermediate-energy electron-cooled storage ring) and the effects of the beam on the plasma were investigated, including energy and angular momentum transfer. Student projects carried out within the beam-plasma group also included development of a diagnostic with high spatial resolution, and preparation for extension of the beam-plasma interaction study to much lower beam energy. This became the principal group activity during the latter part of the project.

This report describes the background of the Export-Import Bank (Eximbank), which finances and promotes U.S. trade. The report also describes Eximbank's programs, developments, international agreements, and legislative issues.

None

This report includes information regarding Pakistan. Information including historical background, Pakistan and U.S. relations, and U.S. aid to Pakistan is detailed in this report.

None