None

The D0 detector underwent a major upgrade to maximize its ability to fully exploit Run II at the Fermilab Tevatron, the world's highest energy collider. The upgrade included a completely new central tracking system with an outer scintillating fiber tracker and an inner silicon vertex detector all within a 2T superconducting solenoid. This thesis describes the development of high level trigger algorithms including vertexing, impact parameter significance and invariant mass, that utilize tracks from these detectors. One of the main physics goals of Run II is the observation of B{sub s} oscillations. This measurement, which cannot be performed at the B factories, will significantly constrain the ''unitarity triangle'' associated with Cp violation and so probe the Standard Model of particle physics. Furthermore this is an interesting measurement as the study of mixing in meson systems has a long history for revealing new physics. The second part of this thesis presents a study of the hadronic decay B{sub s} {yields} D{sub s}{pi}. This important mode provides the best proper time resolution for B{sub s} mixing and is reconstructed for the first time at D0. Projections on the sensitivity to B{sub s} oscillations are then presented.

None

Presented is a measurement of the simultaneous production of a W{sup {+-}} boson in association with a second weak boson (W{sup {+-}} or Z{sup 0}) in p{bar p} collisions at {radical}s = 1.96 TeV. Events are consider with one electron or one muon, missing transverse energy, and at least two hadronic jets. The data were collected by the D0 detector in Run IIa of the Tevatron accelerator and correspond to 1.07 fb{sup -1} of integrated luminosity for each of the two channels (WW/WZ {yields} e{nu}q{bar q} and WW/WZ {yields} {mu}{nu}q{bar q}). The cross section for WW + WZ production is measured to be 20.2 {+-} 2.5(stat) {+-} 3.6(sys) {+-} 1.2(lum) pb with a Gaussian significance of 4.4 standard deviations above the background-only scenario. This measurement is consistent with the Standard Model prediction and represents the first direct evidence for WW and WZ production with semi-leptonic decays at a hadron collider.

Quantum Chromodynamics (QCD) is the gauge theory that governs the strong interactions between quarks and gluons inside hadrons like, for example, protons and neutrons. It shows two well established characteristics, related to the non-Abelian nature of the theory, that dominate its phenomenology: asymptotic freedom and color confinement. The dependence of the strong coupling, {alpha}{sub s}(Q{sup 2}), with the hard scale is such that it decreases with decreasing the distance between partons. This allows to perform precise theoretical calculations at large energy transfer (short distances) using perturbative QCD (pQCD). On the other hand, the strength of the interaction increases with the distance between partons and thus colored quarks and gluons are forced to be confined inside colorless hadrons.

This first issue of the ''ICF Semiannual Report'' contains articles whose diverse subjects attest to the broad technical and scientific challenges that are at the forefront of the ICF program at LLNL. The first article describes the progress being made at solving the surface roughness problem on capsule mandrels. All NIF capsule options, except machined beryllium, require a mandrel upon which the ablator is deposited. This mandrel sets the baseline sphericity of the final capsule. Problems involving defects in the mandrel have been overcome using various techniques so that 2-mm-size mandrels can now be made that meet the NIF design specification. The second article validates and provides a detailed numerical investigation of the shadowgraph technique currently used to diagnose the surface roughness of a fuel ice layer inside of a transparent capsule. It is crucial for the success of the indirect-drive ignition targets that the techniques used to characterize ice-surface roughness be well understood. This study identifies methods for analyzing the bright band that give an accurate measure of the ice-surface roughness. The third article describes a series of realistic laser and target modifications that can lead to 3-4 times more energy coupling and 10 times greater yield from a …

Metal/ceramic interfaces can be found in many engineering applications including microelectronic packaging, multi-layered films, coatings, joints, and composite materials. In order to design reliable engineering systems that contain metal/ceramic interfaces, a comprehensive understanding of interfacial and near interfacial failure mechanisms is necessary.

Lasershot peening is an emerging modern process that impresses a compressive stress into the surfaces of metals, improving their operational lifetime. Almost everyone is familiar with taking a strip of metal or a wire and bending it multiple times until it breaks. In this situation, when the metal is bent, the surface of outer radius is stretched into a tensile state. Under tension, any flaw or micro-crack will grow in size with each bending of the metal until the crack grows through the entire strip, breaking it into two pieces. Flexure of metal components occurs in most applications. The teeth of a transmission gear flex as they deliver torque in a vehicle. Springs and valves flex every time they transfer loads. If fatigue failure from flexing occurs in the tooth of a transmission gear of light or heavy vehicles, in a fan blade of a diesel engine, in shock-absorbers or safety-related supporting structures, significant loss of assets and potentially loss of human life occurs. Lasershot peening, better than any other technique, has the potential to extend the fatigue lifetime of metal components. In the process, the laser generates a high intensity shock wave at the surface of the metal, straining …

The Higgs mechanism preserves the gauge symmetries of the Standard Model while giving masses to the W, Z bosons. Supersymmetry, which protects the Higgs boson mass scale from quantum corrections, predicts at least 5 Higgs bosons, none of which has been directly observed. This thesis presents a search for neutral Higgs bosons, produced in association with bottom quarks. The production rate is greatly enhanced at large values of the Supersymmetric parameter tan {beta}. High-energy p{bar p} collision data, collected from Run II of the Fermilab Tevatron using the D0 detector, are analyzed. In the absence of a signal, values of tan {beta} > 80-120 are excluded at 95% Confidence Level (C.L.), depending on the (CP-odd) neutral Higgs boson mass (studied from 100 to 150 GeV/c{sup 2}).

The author presents the measurement of p{bar p} {yields} Z/{gamma}* {yields} e{sup +}e{sup -} + X inclusive differential cross section as a function of boson rapidity. The data, which correspond to an integrated luminosity of 0.4 fb{sup -1}, were collected with D0 detector at Tevatron p{bar p} collider. At the Run II energy of {radical}s = 1.96 TeV, Z bosons are produced with rapidity out to {+-} 3. The cross section is measured in a mass range between 71 to 111 GeV for the allowed kinematic range.

The main topic of this thesis is the measurement of b-quark jet shapes at CDF. CDF is an experiment located at Fermilab, in the United States, which studies proton-antiproton collisions at a center of mass energy of 1.96TeV. To reach this energy, the particles are accelerated using the Tevatron accelerator which is currently the highest energy collider in operation. The data used for this analysis were taken between February 2002 and September 2004 and represent an integrated luminosity of about 300 pb{sup -1}. This is the first time that b-quark jet shapes have been measured at hadron colliders. The basis of this measurement lies in the possibility of enhancing the b-quark jet content of jet samples by requiring the jets to be identified as having a displaced vertex inside the jet cone. Such jets are called tagged. This enhances the b-quark jet fraction from about 5% before tagging to 20-40% after tagging, depending on the transverse momentum of the jets. I verified that it is possible to apply this secondary vertex tagging algorithm to different cone jet algorithms (MidPoint and JetClu) and different cone sizes (0.4 and 0.7). I found that the performance of the algorithm does not change significantly, …

A new measurement of the inclusive and differential production cross sections of J/{psi} mesons and b-hadrons in proton-antiproton collisions at {radical}s = 1960 GeV is presented. The data correspond to an integrated luminosity of 39.7 pb{sup -1} collected by the CDF Run II detector. The integrated cross section for inclusive J/{psi} production for all transverse momenta from 0 to 20 GeV/c in the rapidity range |y| < 0.6 is found to be 4.08 {+-} 0.02(stat){sub -0.33}{sup +0.36}(syst) {mu}b. The fraction of J/{psi} events from the decay of the long-lived b-hadrons is separated by using the lifetime distribution in all events with p{sub T}(J/{psi}) > 1.25 GeV/c. The total cross section for b-hadrons, including both hadrons and anti-hadrons, decaying to J/{psi} with transverse momenta greater than 1.25 GeV/c in the rapidity range |y(J/{psi})| < 0.6, is found to be 0.330 {+-} 0.005(stat){sub -0.033}{sup +0.036}(syst) {mu}b. Using a Monte Carlo simulation of the decay kinematics of b-hadrons to all final states containing a J/{psi}, the first measurement of the total single b-hadron cross section down to zero transverse momentum is extracted at sqrts = 1960 GeV. The total single b-hadron cross section integrated over all transverse momenta for b-hadrons in the rapidity …

The standard model (SM) of particle physics is a theory, describing three out of four fundamental forces. In this model the Cabibbo-Kobayashi-Maskawa (CKM) matrix describes the transformation between the mass and weak eigenstates of quarks. The matrix properties can be visualized as triangles in the complex plane. A precise measurement of all triangle parameters can be used to verify the validity of the SM. The least precisely measured parameter of the triangle is related to the CKM element |V{sub td}|, accessible through the mixing frequency (oscillation) of neutral B mesons, where mixing is the transition of a neutral meson into its anti-particle and vice versa. It is possible to calculate the CKM element |V{sub td}| and a related element |V{sub ts}| by measuring the mass differences {Delta}m{sub d} ({Delta}m{sub s}) between neutral B{sub d} and {bar B}{sub d} (B{sub s} and {bar B}{sub s}) meson mass eigenstates. This measurement is accomplished by tagging the initial and final state of decaying B mesons and determining their lifetime. Currently the Fermilab Tevatron Collider (providing p{bar p} collisions at {radical}s = 1.96 TeV) is the only place, where B{sub s} oscillations can be studied. The first selection of the 'golden', fully hadronic decay …

In this thesis they report the measurement of ratios of branching fractions: {Beta}(B{sub s}{sup 0} {yields} D{sub s}{sup -}{pi}{sup +}{pi}{sup +}{pi}{sup -})/{Beta}(B{sup 0} {yields} D{sup -}{pi}{sup +}{pi}{sup +}{pi}{sup -}), and {Beta}(B{sup 0} {yields} D{sup -}D{sub s}{sup +})/{Beta}(B{sup 0} {yields} D{sup -}{pi}{sup +}{pi}{sup +}{pi}{sup -}), using 355 pb{sup -1} of data collected by CDF detector at the Tevatron p{bar p} collider at {radical}s = 1.96 TeV.

The measurement of B{sub s}{sup 0} mixing is one of the flagship analyses for the Run II B physics program. The sensitivity of the measurement to the frequency of B{sub s}{sup 0} oscillations strongly depends on the number of reconstructed B{sub s}{sup 0} mesons. They present the measurement of the ratio of branching fractions Br(B{sub s}{sup 0} {yields} D{sub s}{sup -}{pi}{sup +})/Br(B{sup 0} {yields} D{sup -}{pi}{sup +}), which directly influences the number of B{sub s}{sup 0} events available for the measurement of B{sub s}{sup 0} mixing at CDF-II. They analyze 115 pb{sup -1} of data collected with the CDF-II detector in p{bar p} collisions at {radical}s = 1.96 TeV using a novel displaced track trigger. They reconstruct 78 {+-} 11 B{sub s}{sup 0} {yields} D{sub s}{sup -}{pi}{sup +} decays at 1153 {+-} 45 B{sup 0} {yields} D{sup -}{pi}{sup +} decays with good signal to background ratio. This is the world's largest sample of fully reconstructed B{sub s}{sup 0} {yields} D{sub s}{sup -}{pi}{sup +} decays. They find the ratio of production fractions multiplied by the ratio of branching fractions to be: f{sub s}/f{sub d} {center_dot} Br(B{sub s}{sup 0} {yields} D{sub s}{sup -}{pi}{sup +})/Br(B{sup 0} {yields} D{sup -}{pi}{sup +}) = 0.325 {+-} …

Top quarks are predominantly produced in pairs via the strong interaction in {bar p}p collisions at {radical}s = 1.96 TeV . The top quark has a weak isospin 1/2, composing a weak isospin doublet with the bottom quark. This characteristic predicts not only top quark pair production via strong interaction but also single production together with a bottom quark via weak interaction. However, finding single top quark production is challenging since it is rarely produced ({sigma}{sub singletop} = 2.9 pb) against background processes with the same final state like W+jets and t{bar t}. A measurement of electroweak single top production probes the W-t-b vertex, which provides a direct determination of the Cabbibo-Kobayashi-Maskawa (CKM) matrix element |V{sub tb}|. The sample offers a source of almost 100% polarized top quarks. This thesis describes an optimized search for s-channel single top quark production and a measurement of the single top production cross section using 2.7 fb{sup -1} of data accumulated with the CDF detector. We are using events with one high-p{sub T} lepton, large missing E{sub T} and two identified b-quark jets where one jet is identified using a secondary vertex tagger, called SecVtx, and the other jet is identified using SecVtx or …

A measurement of the asymmetry between the strange and antistrange quark distributions, from a next to leading order QCD analysis of dimuon events measured by the NuTeV experiment at Fermilab is presented. Neutrino charged current events with two muons in the final state provide a direct means for studying charm production and measuring the strange sea. NuTeV's sign selected beam allows independent measurement of the strange and antistrange seas. An improved measurement of the neutrino and antineutrino forward dimuon cross section tables, using the complete charged current event sample for normalization is performed. These tables are then analyzed at NLO to measure the strange and antistrange seas. Detector acceptance is modeled using an NLO charm cross section differential in all variables required. The strange quark distribution is found to have an integrated momentum weighted asymmetry of +0.00196 {+-} 0.00046(stat) {+-} 0.00045(syst) {+-} 0.00182(external). The charm mass is found to be 1.41 {+-} 0.10(stat) {+-} 0.08(syst) {+-} 0.12(external) GeV.

None

None

None

This thesis is focused on an inclusive search of the t{bar t} {yields} E{sub T} + jets decay channel by means of neural network tools in proton antiproton collisions at {radical}s = 1.96 TeV recorded by the Collider Detector at Fermilab (CDF). At the Tevatron p{bar p} collider top quarks are mainly produced in pairs through quark-antiquark annihilation and gluon-gluon fusion processes; in the Standard Model description, the top quark then decays to a W boson and a b quark almost 100% of the times, so that its decay signatures are classified according to the W decay modes. When only one W decays leptonically, the t{bar t} event typically contains a charged lepton, missing transverse energy due to the presence of a neutrino escaping from the detector, and four high transverse momentum jets, two of which originate from b quarks. In this thesis we describe a t{bar t} production cross section measurement which uses data collected by a 'multijet' trigger, and selects this kind of top decays by requiring a high-P{sub T} neutrino signature and by using an optimized neural network to discriminate top quark pair production from backgrounds. In Chapter 1, a brief review of the Standard Model of …

The production cross section and the kinematic properties of the decay products of W{gamma} in the W {yields} {mu}{nu} decay channel from p{bar p} collisions at {radical}s = 1.96 TeV are presented. The measurement use the high p{sub T} muon data from the upgraded Collider Detector at Fermilab (CDF). The data were collected between March 2002 and September 2003. The total integrated luminosities are 192 pb{sup -1} with the muon detector which covers the pseudorapidity region of |{eta}| {le} 0.6 and 175 pb{sup -1} with the muon detector covering the region 0.6 {le} |{eta}| {le} 1.0. In the Standard Model the {mu}{nu}{gamma} final states occur due to W{gamma} {yields} {mu}{nu}{gamma} production and via muon Bremsstrahlung, W {yields} {mu}{nu} {yields} {mu}{nu}{gamma}. W bosons are selected in their muon decay mode. Additionally, photons with transverse energy above 7 GeV, pseudorapidity in the central region (|{eta}| < 1.1) and muon-photon angular separation {Delta}R({mu},{gamma}) > 0.7 are selected. The author observes a total of 128 W{gamma} candidates, whereas the Standard Model expectation is 142.4 {+-} 9.5 events. The W{gamma} production cross section is found to be {sigma}(p{bar p} {yields} {mu}{nu}{gamma}) = 16.3 {+-} 2.3(stat.) {+-} 1.8(syst.) {+-} 1.2(lum.) [pb]. The theoretical prediction for this …

The cross-section of p{bar p} {yields} Z{sup 0}{gamma} + X production at {radical}s = 1.96 TeV using the CDF II detector at the Fermilab Tevatron is measured using 202 pb{sup -1} of data from March 2002 to September 2003, collected with high P{sub T} lepton triggers. The number of events observed and their kinematic distributions are compared to the NLO Standard Model prediction in both the Z{sup 0} {yields} e{sup +}e{sup -} and Z{sup 0} {yields} {mu}{sup +}{mu}{sup -} channels. For a minimum lepton-photon separation of {Delta}R{sub l{gamma}} > 0.7, E{sub T}{sup {gamma}} > 7 GeV and a dilepton invariant mass m(l,l) > 40 GeV/c{sup 2}, the cross-section times branching ratio is measured to be 4.6 {+-} 0.5(stat) {+-} 0.2(sys) {+-} 0.3(lumi) pb compared to the NLO Standard Model prediction of 4.5 {+-} 0.3(th) pb.

This thesis presents two measurements of the top quark pair production cross section at {radical}s = 1:96 TeV using data from the D0 experiment. Both measurements are performed in the dilepton final state and make use of secondary vertex b-tagging.