Article on structural and electronic properties of carbon nanotube tapers, a set of nanostructures comprised of straight tubular sections with decreasing diameters, joined to each other via conical funnels and terminated with a hemispherical cap.

Article on first-principles investigations of the dielectric properties of polypropylene/metal-oxide interfaces. Nanoscale-resolved dielectric properties of polypropylene/metal-oxide (alumina, PbTiO₃) interfaces and of the corresponding surfaces are investigated via first-principles calculations.

Article on the harpy eagle (Harpia harpyja) and how high levels of genetic diversity and differentiation can fuel conservation programs.

This article discusses non-Poisson dichotomous noise and higher-order correlation functions and aging.

The poloidal field (PF) coil system on ITER, which provides both feedforward and feedback control of plasma position, shape, and current, is a critical element for achieving mission performance. Analysis of PF capabilities has focused on the 15 MA Q = 10 scenario with a 300-500 s flattop burn phase. The operating space available for the 15 MA ELMy H-mode plasma discharges in ITER and upgrades to the PF coils or associated systems to establish confidence that ITER mission objectives can be reached have been identified. Time dependent self-consistent free-boundary calculations were performed to examine the impact of plasma variability, discharge programming, and plasma disturbances. Based on these calculations a new reference scenario was developed based upon a large bore initial plasma, early divertor transition, low level heating in L-mode, and a late H-mode onset. Equilibrium analyses for this scenario indicate that the original PF coil limitations do not allow low li (<0.8) operation or lower flux states, and the flattop burn durations were predicted to be less than the desired 400 s. This finding motivates the expansion of the operating space, considering several upgrade options to the PF coils. Analysis was also carried out to examine the feedback current …

None

We study the lithospheric structure of Africa, Arabia and adjacent oceanic regions with fundamental-mode surface waves over a wide period range. Including short period group velocities allows us to examine shallower features than previous studies of the whole continent. In the process, we have developed a crustal thickness map of Africa. Main features include crustal thickness increases under the West African, Congo, and Kalahari cratons. We find crustal thinning under Mesozoic and Cenozoic rifts, including the Benue Trough, Red Sea, and East, Central, and West African rift systems. Crustal shear wave velocities are generally faster in oceanic regions and cratons, and slower in more recent crust and in active and formerly active orogenic regions. Deeper structure, related to the thickness of cratons and modern rifting, is generally consistent with previous work. Under cratons we find thick lithosphere and fast upper mantle velocities, while under rifts we find thinned lithosphere and slower upper mantle velocities. There are no consistent effects in areas classified as hotspots, indicating that there seem to be numerous origins for these features. Finally, it appears that the African Superswell has had a significantly different impact in the north and the south, indicating specifics of the feature (temperature, …

At the Advanced Light Source at Lawrence Berkeley National Laboratory, we are investigating how to increase both the speed and resolution of synchrotron infrared imaging. Synchrotron infrared beamlines have diffraction-limited spot sizes and high signal to noise, however spectral images must be obtained one point at a time and the spatial resolution is limited by the effects of diffraction. One technique to assist in speeding up spectral image acquisition is described here and uses compressive imaging algorithms. Compressive imaging can potentially attain resolutions higher than allowed by diffraction and/or can acquire spectral images without having to measure every spatial point individually thus increasing the speed of such maps. Here we present and discuss initial tests of compressive imaging techniques performed with ALS Beamline 1.4.3?s Nic-Plan infrared microscope, Beamline 1.4.4 Continuum XL IR microscope, and also with a stand-alone Nicolet Nexus 470 FTIR spectrometer.

New software tools are introduced to facilitate diffraction experiments involving largenumbers of crystals. While existing programs have long provided a framework for lattice indexing, Bragg spot integration, and symmetry determination, these initial data processing steps often require significant manual effort. This limits the timely availability of data analysis needed for high-throughput procedures, including the selection of the best crystals from a large sample pool, and the calculation of optimal data collection parameters to assure complete spot coverage with minimal radiation damage. To make these protocols more efficient, we developed a network of software applications and application servers, collectively known as Web-Ice. When the package is installed at a crystallography beamline, a programming interface allows the beamline control software (e.g., Blu-Ice / DCSS) to trigger data analysis automatically. Results are organized based on a list of samples that the user provides, and are examined within a Web page, accessible both locally at the beamline or remotely. Optional programming interfaces permit the user tocontrol data acquisition through the Web browser. The system as a whole is implemented to support multiple users and multiple processors, and can be expanded to provide additional scientific functionality. Web-Ice has a distributed architecture consisting of several stand-alone …

Shimming systems are required to provide sufficient fieldhomogeneity for high resolution NMR. In certain specialized applications,such as rotating-field NMR and portable (ex-situ) NMR, permanentmagnet-based shimming systems can provide considerable advantages. Wepresent a simple two-dimensional shimming method based on harmoniccorrector rings which can provide arbitrary multipole order shimmingcorrections. Results demonstrate, for example, that quadrupolar ordershimming improves the linewidth by up to and order of magnitude. Anadditional order of magnitude reduction is in principle achievable byultilizing this shimming method for z-gradient correction and higherorder xy gradients.

We discuss the energy dependence of the total charm cross section and some of its theoretical uncertainties including the quark mass, scale choice and the parton densities. We compare the next-to-leading order calculation of the total cross section with results obtained using PYTHIA.

Laser-induced breakdown in the bulk of transparent dielectric materials is associated with the generation of extreme localized conditions of temperatures and pressures. In this work, we perform pump and probe damage testing experiments to investigate the evolution of transient absorption by the host material arising from modifications following confined laser energy deposition in fused silica and DKDP materials. Specifically, we measure the size of the damage sites observed in the region of spatial overlap between the pump and probe pulses versus probe time delay and energy. Results of this proof-of-principle experimental work confirm that material modifications under extreme conditions created during a damage event include transient optical absorption. In addition, we found that the relaxation times of the induced absorption are very distinct for DKDP and SiO{sub 2} even under identical excitation conditions, on the order of 100 ns and 100 {micro}s, respectively.

From the standpoints of both basic research and biotechnology, there is considerable interest in reaching a clearer understanding of the diversity of biological mechanisms employed during lignocellulose degradation. Globally, termites are an extremely successful group of wood-degrading organisms and are therefore important both for their roles in carbon turnover in the environment and as potential sources of biochemical catalysts for efforts aimed at converting wood into biofuels. Only recently have data supported any direct role for the symbiotic bacteria in the gut of the termite in cellulose and xylan hydrolysis. Here we use a metagenomic analysis of the bacterial community resident in the hindgut paunch of a wood-feeding Nasutitermes species to show the presence of a large, diverse set of bacterial genes for cellulose and xylan hydrolysis. Many of these genes were expressed in vivo or had cellulase activity in vitro, and further analyses implicate spirochete and fibrobacter species in gut lignocellulose degradation. New insights into other important symbiotic functions including H{sub 2} metabolism, CO{sub 2}-reductive acetogenesis and N{sub 2} fixation are also provided by this first system-wide gene analysis of a microbial community specialized towards plant lignocellulose degradation. Our results underscore how complex even a 1-{micro}l environment can be.

Evaluation of ion-atom charge-changing cross sections is needed for many accelerator applications. A classical trajectory Monte Carlo (CTMC) simulation has been used to calculate ionization and charge exchange cross sections. For benchmarking purposes, an extensive study has been performed for the simple case of hydrogen and helium targets in collisions with various ions. Despite the fact that the simulation only accounts for classical mechanics, the calculations are comparable to experimental results for projectile velocities in the region corresponding to the vicinity of the maximum cross section. Shortcomings of the CTMC method for multielectron target atoms are discussed.

Ln{sub 3}LuSe{sub 6} (Ln = La, Ce), {beta}-LnLuSe{sub 3} (Ln = Pr, Nd), and Ln{sub x}Lu{sub 4-x}Se{sub 6} (Ln = Sm, Gd; x = 1.82, 1.87) have been synthesized using a Sb{sub 2}Se{sub 3} flux at 1000 C. Ln{sub 3}LuSe{sub 6} (Ln = La, Ce) adopt the U{sub 3}ScS{sub 6}-type three-dimensional structure, which is constructed from two-dimensional {infinity}{sup 2} [Ln{sub 3}Se{sub 6}]{sup 3-} slabs with the gaps between these slabs filled by octahedrally coordinated Lu{sup 3+} ions. The series of {beta}-LnLuSe{sub 3} (Ln = Pr, Nd) are isotypic with UFeS{sub 3}. Their structures include layers formed from LuSe6 octahedra that are separated by eight-coordinate larger Ln{sup 3+} ions in bicapped trigonal prismatic environments. Sm{sub 1.82}Lu{sub 2.18}Se{sub 6} and Gd{sub 1.87}Lu{sub 2.13}Se{sub 6} crystallize in the disordered F-Ln{sub 2}S{sub 3} type structure with the eight-coordinate bicapped trigonal prismatic Ln(1) ions residing in the one-dimensional channels formed by three different double chains via edge and corner sharing. These double chains are constructed from Ln(2)Se{sub 7} monocapped trigonal prisms, Ln(3)Se{sub 6} octahedra, and Ln(4)S{sub 6} octahedra, respectively. The magnetic susceptibilities of {beta}-PrLuSe{sub 3} and {beta}-NdLuSe{sub 3} follow the Curie-Weiss law. Sm{sub 1.82}Lu{sub 2.18}Se{sub 6} shows van Vleck paramagnetism. Magnetic measurements show that Gd{sub …

The author discusses results from the Tevatron experiments on mixing and CP-violation in B{sub s} mesons, including the observation of B{sub s} oscillations and the first precision measurement of the mixing frequency, as well as a measurement of the lifetime difference {Delta}{Lambda}{sub s} and the first measurement of the CP-violating phase {delta}{sub s}. The author also briefly reports on the observation of four new bottom baryons at CDF.

In a world with water resources severely impacted bytechnology, science must actively contribute to water law. To this end,this paper is an earth scientist s attempt to comprehend essentialelements of water law, and to examine their connections to science.Science and law share a common logical framework of starting with apriori prescribed tenets, and drawing consistent inferences. In science,observationally established physical laws constitute the tenets, while inlaw, they stem from social values. The foundations of modern water law inEurope and the New World were formulated nearly two thousand years ago byRoman jurists who were inspired by Greek philosophy of reason.Recognizing that vital natural elements such as water, air, and the seawere governed by immutable natural laws, they reasoned that theseelements belonged to all humans, and therefore cannot be owned as privateproperty. Legally, such public property was to be governed by jusgentium, the law of all people or the law of all nations. In contrast,jus civile or civil law governed private property. Remarkably, jusgentium continues to be relevant in our contemporary society in whichscience plays a pivotal role in exploiting vital resources common to all.This paper examines the historical roots of modern water law, followstheir evolution through the centuries, and examines how …

The United States is considering the development of a domestic hydrogen-based energy economy. Hydrogen is of particular interest as a secondary energy carrier because it has the potential to be storable, transportable, environmentally benign, and useful in many chemical processes. Obviously, before a hydrogen economy can be implemented, an efficient and environmentally friendly means for large scale hydrogen production must be identified, proven, and developed. Hydrogen is now produced primarily via steam reforming of methane. However, from a long-term perspective, methane reforming is not a viable process for large-scale production of hydrogen since such fossil fuel conversion processes consume non-renewable resources and emit greenhouse gases. The U. S. National Research Council has recommended the use of water-splitting technologies to produce hydrogen using energy derived from a nuclear reactor. For the past several years, the Idaho National Laboratory has been actively studying the use of solid oxide fuel cells in conjunction with nuclear power for large-scale, high-temperature, electrolytic hydrogen production.

A novel compact CT-guided intensity modulated proton radiotherapy (IMPT) system is described. The system is being designed to deliver fast IMPT so that larger target volumes and motion management can be accomplished. The system will be ideal for large and complex target volumes in young patients. The basis of the design is the dielectric wall accelerator (DWA) system being developed at the Lawrence Livermore National Laboratory (LLNL). The DWA uses fast switched high voltage transmission lines to generate pulsed electric fields on the inside of a high gradient insulating (HGI) acceleration tube. High electric field gradients are achieved by the use of alternating insulators and conductors and short pulse times. The system will produce individual pulses that can be varied in intensity, energy and spot width. The IMPT planning system will optimize delivery characteristics. The system will be capable of being sited in a conventional linac vault and provide intensity modulated rotational therapy. Feasibility tests of an optimization system for selecting the position, energy, intensity and spot size for a collection of spots comprising the treatment are underway. A prototype is being designed and concept designs of the envelope and environmental needs of the unit are beginning. The status of …

Some arguments of Bristow (1960) concerning the effects of cracks on elastic and transport (i.e., electrical or thermal conduction) properties of cold-worked metals are reexamined. The discussion is posed in terms of a modern understanding of bounds and estimates for physical properties of polycrystals--in contrast to Bristow's approach using simple mixture theory. One type of specialized result emphasized here is the cross-property estimates and bounds that can be obtained using the methods presented. Our results ultimately agree with those of Bristow, i.e., confirming that microcracking is not likely to be the main cause of the observed elastic behavior of cold-worked metals. However, it also becomes clear that the mixture theory approach to the analysis is too simple and that crack-crack interactions are necessary for proper quantitative study of Bristow's problem.

We investigatethe reconstruction of high pT hadronically-decaying top quarksat the Large Hadron Collider. One of the main challenges in identifying energetictop quarks is that the decay products become increasingly collimated. This reducesthe efficacy of conventional reconstruction methods that exploit the topology of thetop quark decay chain. We focus on the cases where the decay products of the topquark are reconstructed as a single jet, a"top-jet." The most basic"top-tag" methodbased on jet mass measurement is considered in detail. To analyze the feasibility ofthe top-tagging method, both theoretical and experimental aspects of the large QCDjet background contribution are examined. Based on a factorization approach, wederive a simple analytic approximation for the shape of the QCD jet mass spectrum.We observe very good agreement with the Monte Carlo simulation. We consider high pT tt bar production in the Standard Model as an example, and show that our theoretical QCD jet mass distributions can efficiently characterize the background via sideband analyses. We show that with 25 fb-1 of data, our approach allows us to resolve top-jets with pT _> 1 TeV, from the QCD background, and about 1.5 TeV top-jets with 100 fb-1, without relying on b-tagging. To further improve the significancewe consider jet shapes …

Detailed spatial resolution tests were performed on beamline 1.4.4 at the Advanced Light Source synchrotron facility in Berkeley, CA. The high-brightness synchrotron source is coupled at this beamline to a Thermo-Electron Continumum XL infrared microscope. Two types of resolution tests in both the mid-IR (using a KBr beamsplitter and an MCT-A* detector) and in the near-IR (using a CaF2 beamsplitter and an InGaAS detector) were performed and compared to a simple diffraction-limited spot size model. At the shorter wavelengths in the near-IR the experimental results begin to deviate from only diffraction-limited. The entire data set is fit using a combined diffraction-limit and demagnified electron beam source size model. This description experimentally verifies how the physical electron beam size of the synchrotron source demagnified to the sample stage on the endstation begins to dominate the focussed spot size and therefore spatial resolution at higher energies. We discuss how different facilities, beamlines, and microscopes will affect the achievable spatial resolution.

PEM fuel cells are excellent candidates for transportation applications due to their high efficiencies. PEM fuel cell Balance of Plant (BOP) components, such as air, thermal, and water management sub-systems, can have a significant effect on the overall system performance, but have traditionally not been addressed in research and development efforts. Recognizing this, the U.S. Department of Energy and Honeywell International Inc. are funding an effort that emphasizes the integration and optimization of air, thermal and water management sub-systems. This effort is one of the major elements to assist the fuel cell system developers and original equipment manufacturers to achieve the goal of an affordable and efficient power system for transportation applications. Past work consisted of: (1) Analysis, design, and fabrication of a motor driven turbocompressor. (2) A systematic trade study to select the most promising water and thermal management systems from five different concepts (absorbent wheel humidifier, gas to gas membrane humidifier, porous metal foam humidifier, cathode recycle compressor, and water injection pump.) This presentation will discuss progress made in the research and development of air, water and thermal management sub-systems for PEM fuel cell systems in transportation applications. More specifically, the presentation will discuss: (1) Progress of the …

Current activities of the American Society of Mechanical Engineers (ASME), Section III Subgroup on Containment Systems for Spent Fuel High-Level Waste Transport Packagings (also known as Subgroup NUPACK) are reviewed with emphasis on the recent revision of Subsection WB. Also, brief insightson new proposals for the development of rules for internal support structures and for a strain-based acceptance criteria are provided.