Isotopic compositions of core-water samples from boreholes USW SD-6 and USW WT-24 indicate that recent water has been introduced at depth. Tritium, carbon, oxygen, and deuterium isotopic compositions all support younger water at depth in the two boreholes. Peaks in tritium concentrations in pore-water samples, indicating younger water than the other samples, observed near the basal vitrophyre of the Topopah Spring Tuff and at the bottom of the CHF and the top of the PP in both boreholes SD-6 and WT-24. Larger {sup 14}C activities in two pore-water samples from WT-24 at the bottom of the CHF and the top of the PP indicate younger water than in other samples from WT-24. More positive {delta}{sup 18}O and {delta}D values indicate younger water in samples of pore water at the bottom of the CHF in boreholes SD-6 and WT-24. The isotopic compositions indicating younger water at depth in boreholes SD-6 and WT-24 occur at the basal vitrophyre zone of the Topopah Spring Tuff and the bottom of the CHF/upper part of the PP, probably from lateral preferential flow through connected fractures (fast-flow paths). The source of the young water at borehole WT-24 probably was recharge from The Prow to the north, …

Deep Cryogenic Tempering (DCT) is a specialized process whereby the molecular structure of a material is ''re-trained'' through cooling to -300 F and then heating to +175-1100 F. Cryocon, Inc. (hereafter referred to as Cryocon) and RMOTC entered an agreement to test the process on oilfield production components, including rod pumps, rods, couplings, and tubing. Three Shannon Formation wells were selected (TD about 500 ft) based on their proclivity for high component wear rates. Phase 1 of the test involved operation for a nominal 120 calendar day period with standard, non-treated components. In Phase 2, treated components were installed and operated for another nominal 120 calendar day period. Different cryogenic treatment profiles were used for components in each well. Rod pumps (two treated and one untreated) were not changed between test phases. One well was operated in pumped-off condition, resulting in abnormal wear and disqualification from the test. Testing shows that cryogenic treatment reduced wear of rods, couplers, and pump barrels. Testing of production tubing produced mixed results.

In this paper we classify hydrate deposits in three classes according to their geologic and reservoir conditions, and discuss the corresponding production strategies. Simple depressurization appears promising in Class 1 hydrates, but its appeal decreases in Class 2 and Class 3 hydrates. The most promising production strategy in Class 2 hydrates involves combinations of depressurization and thermal stimulation, and is clearly enhanced by multi-well production-injection systems. The effectiveness of simple depressurization in Class 3 hydrates is limited, and thermal stimulation (alone or in combination with depressurization) through single well systems seems to be the strategy of choice in such deposits.

Throughout the utility industry, there is high interest in subsurface imaging of plastic, ceramic, and metallic objects because of the cost, reliability, and safety benefits available in avoiding impacts with the existing infrastructure and in reducing inappropriate excavations. Industry interest in locating plastic pipe has resulted in funding available for the development of technologies that enable this imaging. Gas Technology Institute (GTI) proposes to develop a compact and inexpensive capacitive tomography imaging sensor that takes the form of a flat plate or flexible mat that can be placed on the ground to image objects embedded in the soil. A compact, low-cost sensor that can image objects through soil could be applied to multiple operations and will produce a number of cost savings for the gas industry. In a stand-alone mode, it could be used to survey an area prior to excavation. The technology would improve the accuracy and reliability of any operation that involves excavation by locating or avoiding buried objects. An accurate subsurface image of an area will enable less costly keyhole excavations and other cost-saving techniques. Ground penetrating radar (GPR) has been applied to this area with limited success. Radar requires a high-frequency carrier to be injected into …

The current congestion control mechanism used in TCP has difficulty reaching full utilization on high speed links, particularly on wide-area connections. For example, the packet drop rate needed to fill a Gigabit pipe using the present TCP protocol is below the currently achievable fiber optic error rates. HighSpeed TCP was recently proposed as a modification of TCP's congestion control mechanism to allow it to achieve reasonable performance in high speed wide-area links. In this research, simulation results showing the performance of HighSpeed TCP and the impact of its use on the present implementation of TCP are presented. Network conditions including different degrees of congestion, different levels of loss rate, different degrees of bursty traffic and two distinct router queue management policies were simulated. The performance and fairness of HighSpeed TCP were compared to the existing TCP and solutions for bulk-data transfer using parallel streams.

A series of time-lapse seismic cross well and single well experiments were conducted in a diatomite reservoir to monitor the injection of CO{sub 2} into a hydrofracture zone, using P- and S-wave data. During the first phase the set of seismic experiments were conducted after the injection of water into the hydrofrac-zone. The set of seismic experiments was repeated after a time period of 7 months during which CO{sub 2} was injected into the hydrofractured zone. The issues to be addressed ranged from the detectability of the geologic structure in the diatomic reservoir to the detectability of CO{sub 2} within the hydrofracture. During the pre-injection experiment, the P-wave velocities exhibited relatively low values between 1700-1900 m/s, which decreased to 1600-1800 m/s during the post-injection phase (-5 percent). The analysis of the pre-injection S-wave data revealed slow S-wave velocities between 600-800 m/s, while the post-injection data revealed velocities between 500-700 m/s (-6 percent). These velocity estimates produced high Poisson ratios between 0.36 and 0.46 for this highly porous ({approx} 50 percent) material. Differencing post- and pre-injection data revealed an increase in Poisson ratio of up to 5 percent. Both, velocity and Poisson estimates indicate the dissolution of CO{sub 2} in the …

The Compliance Plan Volume (Volume I) identifies project activity schedule milestones for achieving compliance with Land Disposal Restrictions (LDR). Information regarding the technical evaluation of treatment options for SRS mixed wastes is contained in the Background Volume (Volume II) and is provided for information.

The first Defense Waste Processing Facility high level radioactive waste glass melter was successfully operated for eight years. Recent failure of melter heaters and decrease in glass production necessitated its removal. Prior to removing the melter from the facility, a remote in situ visual inspection of the refractory and Inconel(TM) 690 components was performed. The vapor space and glass contact refractory blocks were in excellent condition, showing little evidence of spalling or corrosion. Inconel 690 top head components and lid heaters in the vapor space were also in good condition, considering the service. Upper electrodes experienced significant deflection, which probably resulted from extended operation in excess of 1150 degrees C. Condition of the melter components examined during the remote visual inspection is summarized in this paper.

Pore water in the Topopah Spring Tuff has a narrow range of {delta}{sup 87}Sr values that can be calculated from the {delta}{sup 87}Sr values of the rock considering advection through and reaction with the overlying nonwelded tuffs of the PTn. This model can be extended to estimate the variation of {delta}{sup 87}Sr in the pore water through time; this approximates the variation of {delta}{sup 87}Sr measured in calcite fracture coatings. In samples of calcite where no silica can be dated by other methods, strontium isotope data may be the only method to determine ages. In addition, other Sr-bearing minerals in the calcite and opal coatings, such as fluorite, may be dated using the same model.

To date, our synthetic research efforts have been focused on the development of stimuli-responsive water-soluble polymers designed for use in enhanced oil recovery (EOR) applications. These model systems are structurally tailored for potential application as viscosifiers and/or mobility control agents for secondary and tertiary EOR methods. The following report discloses the progress of our ongoing research of polyzwitterions, polymers derived from monomers bearing both positive and negative charges, that show the ability to sustain or increase their hydrodynamic volume (and thus, solution viscosity) in the presence of electrolytes. Such polymers appear to be well-suited for use under conditions similar to those encountered in EOR operations. Additionally, we disclose the synthesis and characterization of a well-defined set of polyacrylamide (PAM) homopolymers that vary by MW. The MW of the PAM samples is controlled by addition of sodium formate to the polymerization medium as a conventional chain transfer agent. Data derived from polymer characterization is used to determine the kinetic parameter C{sub CT}, the chain transfer constant to sodium formate under the given polymerization conditions. The PAM homopolymer series will be employed in future set of experiments designed to test a simplified intrinsic viscosity equation. The flow resistance of a polymer solution …

Using a method originally proposed for describing a continuum-space polymer fluid, a new expression for the Helmholtz energy of mixing is proposed for a binary lattice mixture. Molecular size asymmetry and nonrandomness due to segment-segment interactions are taken into account. An expression proposed by Yan, Liu and Hu for a binary lattice mixture of monomers, based on the Ising model, is used as a reference system. Calculated critical constants and liquid-liquid coexistence curves are in good agreement with Monte Carlo simulations for lattice mixtures with modest size asymmetry. Because lattice spacing rises with increasing temperature, comparison of calculated binary liquid-liquid equilibria with experiment requires that calculations take into account that the interchange energy falls as temperature rises. While the new expression for the Helmholtz energy of mixing provides much improvement over the Flory-Huggins equation, calculated liquid-liquid equilibria for three binary systems are similar to those from Guggenheim's quasi-chemical theory.

The dual-continuum random-walk particle tracking approach is an attractive simulation method for simulating transport in a fractured porous medium. In order to be truly successful for such a model, however, the key issue is to properly simulate the mass transfer between the fracture and matrix continua. In a recent paper, Pan and Bodvarsson (2002) proposed an improved scheme for simulating fracture-matrix mass transfer, by introducing the concept of activity range into the calculation of fracture-matrix particle-transfer probability. By comparing with analytical solutions, they showed that their scheme successfully captured the transient diffusion depth into the matrix without any additional subgrid (matrix) cells. This technical note presents an expansion of their scheme to cases in which significant water flow through the fracture-matrix interface exists. The dual-continuum particle tracker with this new scheme was found to be as accurate as a numerical model using a more detailed grid. The improved scheme can be readily incorporated into the existing particle-tracking code, while still maintaining the advantage of needing no additional matrix cells to capture transient features of particle penetration into the matrix.

The efficiency of thermophotovoltaic (TPV) energy conversion is dependent on efficient spectral control. An edge pass filter (short pass) in series with a highly doped, epitaxially grown layer has achieved the highest performance of TPV spectral control. Front surface, tandem filters have achieved the highest spectral efficiency and represent the best prospect for even higher spectral efficiency for TPV energy conversion systems. Specifically, improvements in the physical vapor deposition process, identification of other materials with a high index of refraction and a low absorption coefficient, and more efficient edge filter designs could provide higher TPV spectral performance.

The project seeks to develop and validate a new pulverized coal combustion system to reduce utility PC boiler NOx emissions to 0.15 lb/million Btu or less without post-combustion flue gas cleaning. Work during previous reporting periods completed the design, installation, shakedown and initial PRB coal testing of a 3-million Btu/h pilot system at BBP's Pilot-Scale Combustion Facility (PSCF) in Worcester, MA. Based on these results, modifications to the gas-fired preheat combustor and PC burner were defined, along with a modified testing plan and schedule. During the current reporting period, BBP's subcontract was modified to reflect changes in the pilot testing program, and the modifications to the gas-fired preheat combustor were completed. The Computational Fluid Dynamics (CFD) modeling approach was defined for the combined PC burner and 3-million Btu/h pilot system. Modeling of the modified gas-fired preheat combustor was also started.

The goal of this project was to carry out the necessary experiments and analyses to extend current capabilities for modeling fuel transformations to the new conditions anticipated in next-generation coal-based, fuel-flexible combustion and gasification processes. This multi-organization, multi-investigator project has produced data, correlations, and submodels that extend present capabilities in pressure, temperature, and fuel type. The combined experimental and theoretical/computational results are documented in detail in Chapters 1-8 of this report, with Chapter 9 serving as a brief summary of the main conclusions. Chapters 1-3 deal with the effect of elevated pressure on devolatilization, char formation, and char properties. Chapters 4 and 5 deal with advanced combustion kinetic models needed to cover the extended ranges of pressure and temperature expected in next-generation furnaces. Chapter 6 deals with the extension of kinetic data to a variety of alternative solid fuels. Chapter 7 focuses on the kinetics of gasification (rather than combustion) at elevated pressure. Finally, Chapter 8 describes the integration, testing, and use of new fuel transformation submodels into a comprehensive CFD framework. Overall, the effects of elevated pressure, temperature, heating rate, and alternative fuel use are all complex and much more work could be further undertaken in this area. Nevertheless, …

Two cans containing plutonium bearing materials were found during radiography surveillance activities to be bulged. The cans had been stored in DOT 6M shipping containers at the Savannah River Site. The material in the first can (Item CZA96-179) was packaged can/bag/can configuration with the inner and outer cans being crimp sealed. The crimp sealed innermost can was clearly deformed from the radiography picture taken for surveillance purposes. This material had been stored in the shipping container since the mid 1970s. The second can (Item 50014440) contained plutonium bearing material of a different origin. The material had been repackaged at the Savannah River Site in the mid 1990's, and the repackaged can was stored in a 6M shipping drum. A special puncturing tool, which secured the can and allowed for a very controlled puncture of both outer and inner cans was used in a glovebox. The glovebox has a dry air system and an argon supply. The puncturing tool utilized a non-sparking punch and an argon purge. The cans were repackaged into filtered outer cans. A description of the puncturing tool, repackaging activities, and of the materials will be provided.

None

The unsaturated zone (UZ) in Miocene-age welded tuffs at Yucca Mountain, Nevada, is under consideration as a potential site for the construction of a high-level radioactive waste repository. Secondary calcite and silica minerals deposited on fractures and in cavities in the UZ tuffs are texturally, isotopically, and geochemically consistent with UZ deposition from meteoric water infiltrating at the surface and percolating through the UZ along fractures. Nonetheless, two-phase fluid inclusions with small and consistent vapor to liquid (V:L) ratios that yield consistent temperatures within samples and which range from about 35 to about 80 C between samples have led some to attribute these deposits to formation from upwelling hydrothermal waters. Geochronologic studies have shown that calcite and silica minerals began forming at least 10 Ma and continued to form into the Holocene. If their deposition were really from upwelling water flooding the UZ, it would draw into question the suitability of the site as a waste repository.

The {sup 207}Pb/{sup 235}U ages for 14 subsamples of opal or chalcedony layers younger than calcite formed at elevated temperature range between 1.88 {+-} 0.05 and 9.7 {+-} 1.5 Ma with most values older than 6-8 Ma. These data indicate that fluids with elevated temperatures have not been present in the unsaturated zone at Yucca Mountain since about 1.9 Ma and most likely since 6-8 Ma. Discordant U-Pb isotope data for chalcedony subsamples representing the massive silica stage in the formation of the coatings are interpreted using a model of the diffusive loss of U decay products. The model gives an age estimate for the time of chalcedony formation around 10-11 Ma, which overlaps ages of clay minerals formed in tuffs below the water table at Yucca Mountain during the Timber Mountain thermal event.

None

We investigate radionuclide transport from a high-level nuclear waste repository to be situated in the unsaturated zone (UZ) at Yucca Mountain (YM), Nevada. Several radioactive solutes (that cover the range of sorption behavior) and colloids of various sizes are studied. The results of the study indicate the importance of the subsurface geology and site hydrology, i.e., the presence of faults (they dominate and control transport), fractures (the main migration pathways), and the relative distribution of zeolitic and vitric tuffs. The effects of the climatic conditions, diffusion, and sorption (for solutes) or infiltration (for colloids) onto the matrix are discussed. The influence of the colloid size on transport is also investigated.

This document summarizes progress on Cooperative Agreement DE-FC26-99FT40718, Furnace Injection of Alkaline Sorbents for Sulfuric Acid Control, during the time period October 1, 2001 through March 31, 2002. The objective of this project is to demonstrate the use of alkaline reagents injected into the furnace of coal-fired boilers as a means of controlling sulfuric acid emissions. The coincident removal of hydrochloric acid and hydrofluoric acid is also being determined, as is the removal of arsenic, a known poison for NO{sub X} selective catalytic reduction (SCR) catalysts. EPRI, the Tennessee Valley Authority (TVA), FirstEnergy Corporation, American Electric Power (AEP) and the Dravo Lime Company are project co-funders. URS Corporation is the prime contractor. This is the fifth reporting period for the subject Cooperative Agreement. During the previous (fourth) period, two long-term sorbent injection tests were conducted, one on Unit 3 at FirstEnergy's Bruce Mansfield Plant (BMP) and one on Unit 1 at AEP's Gavin Plant. Those tests determined the effectiveness of injecting alkaline slurries into the upper furnace of the boiler as a means of controlling sulfuric acid emissions from these units. The alkaline slurries tested included commercially available magnesium hydroxide slurry (Gavin Plant) and a byproduct magnesium hydroxide slurry (at …

This report presents a brief overview of the activities and tasks accomplished during the first half year (October 1, 2001--March 31, 2002) of the fifth project year budget period (October 1, 2001--September 30, 2002). An executive summary is presented initially followed by the tasks of the current budget period. Then, detailed description of the experimental and modeling investigations are presented. Subsequently, the technical and scientific results of the activities of this project period are presented with some discussions. The findings of this investigation are summarized in the ''Conclusions'' section followed by relevant references. The fifth project year activities are divided into three main parts, which are carried out in parallel. The first part is continuation of the experimental program that includes a study of the oil/water two-phase behavior at high pressures and control system development for the two-phase LLCC{copyright}. This investigation has been extended for three-phase GLCC as well. The second part consists of the development of a simplified mechanistic model incorporating the experimental results and behavior of dispersion of oil in water and water in oil. This will provide an insight into the hydrodynamic flow behavior and serve as the design tool for the industry. Although useful for sizing …

The idea to convert an electron collider into a high energy photon collider has existed for several decades. A key technological limitation to realizing this idea is the need to create a large amount of laser power to drive the Compton back-scattering. A concept to reduce the required laser power using a recirculating cavity has been proposed. We describe a concept for a laser architecture that could drive such a cavity.