ACTS flow loop is now operational under elevated pressure and temperature. Currently, experiments with water under pressure and temperature are being conducted. Based on the analysis of Fann 70 data, empirical correlations defining the shear stress as a function of temperature, pressure and the shear rate have been developed for Petrobras synthetic drilling fluids. PVT equipment has been modified for testing Synthetic drilling fluids. Initial calibration tests have been conducted by using water. Currently, the base oil of the Petrobras synthetic drilling fluid is being tested. Foam flow experiments have been conducted. Currently, more experiments are being conducted while data are being analyzed to characterize the rheology of the foam. Cuttings transport experiments have been conducted using air, water and cuttings. Preliminary results have shown that it may not be possible to avoid cuttings bed deposition under any practical combination of air and water flow rates. Foam stability analyses have been conducted. Effects of salt and oil concentration on the foam stability have been investigated. A software for controlling the data sampling and data storage during cuttings monitoring process have been developed.

Based on a survey of 42 institutions, nuclear engineering enrollments and degrees decreased overall in 1999, continuing a steady decline of several years.

Based on a survey of 49 institutions, health physics enrollments increased at the bachelor's and doctoral level, while master's enrollments decreased. Bachelor's and master's degrees increased slightly and doctoral degrees decreased.

This annual report describes progress during the final year of the project entitled ''Improved Oil Recovery in Mississippian Carbonate Reservoirs in Kansas''. This project funded under the Department of Energy's Class 2 program targets improving the reservoir performance of mature oil fields located in shallow shelf carbonate reservoirs. The focus of the project was development and demonstration of cost-effective reservoir description and management technologies to extend the economic life of mature reservoirs in Kansas and the mid-continent. As part of the project, tools and techniques for reservoir description and management were developed, modified and demonstrated, including PfEFFER spreadsheet log analysis software. The world-wide-web was used to provide rapid and flexible dissemination of the project results through the Internet. A summary of demonstration phase at the Schaben and Ness City North sites demonstrates the effectiveness of the proposed reservoir management strategies and technologies. At the Schaben Field, a total of 22 additional locations were evaluated based on the reservoir characterization and simulation studies and resulted in a significant incremental production increase. At Ness City North Field, a horizontal infill well (Mull Ummel No.4H) was planned and drilled based on the results of reservoir characterization and simulation studies to optimize the location …

None

None

The objective of Task 1.2 has only partly been achieved as the work on Pu/U-formulations and to a significant degree on Th/U-formulations has been performed under grinding/blending conditions that did not replicate plant-like fabrication processes, particularly in the case with the small glovebox attritor. Nevertheless the results do show that actinide-rich particles, not present in specimens made via the alkoxide-route (equilibrium conditions), occur when the grinding process is not efficient enough to ensure that high-fired PuO{sub 2}, ThO{sub 2} and UO{sub 2} particles are below a critical size. Our current perception is that the critical size for specimens sintered at 1350 C for 4 hours is about 5 {micro}m in diameter. The critical size is difficult to estimate, as it is equal to the starting diameter of actinide oxides just visible within brannerite regions. Our larger scale attritor experiments as well as experience with wet and dry ball milling suggests that acceptable mineralogy and microstructure can be obtained by dry milling via attritor and ball mills. This is provided that appropriate attention is paid to the size and density of the grinding media, grinding additives that reduce caking of the powder, and in the case of attritors the grinding speed …

To investigate the long-term alteration behavior of brannerite, we have undertaken a study of 13 natural samples from various geological environments, including granites, granitic pegmatites, quartz veins, and placer deposits. Literature data and U-Th-Pb chemical dating carried out in this work indicate that the samples range in age from approximately 20 Ma to 1580 Ma. Where independent age data or estimates are available for comparison, the U-Th-Pb chemical ages are in reasonable agreement for the younger samples, but the older samples tend to show evidence for Pb loss (up to about 80%), a common feature of metamict Nb, Ta, and Ti oxide minerals. Our results show that many of the samples exhibit only minor alteration, usually within small patches, microfractures, or around the rims of the brannerite crystals. Other samples consist of variable amounts of unaltered and altered brannerite. Heavily altered samples may contain anatase and thorite as fine-grained alteration products. Certain samples exhibited fracturing of the associated rock matrix or mineral phase in the immediate vicinity of the brannerite grains. These fractures contain U bearing material and indicate that some U migrated locally from the source brannerite.

None

The goal of the US Department of Energy (DOE) Clean Coal Technology (CCT) program is to furnish the energy marketplace with a number of advanced, more efficient, and environmentally responsible coal utilization technologies through demonstration projects. These projects seek to establish the commercial feasibility of the most promising advanced coal technologies that have already reached the proof-of-concept stage. This document serves as a DOE post-project assessment of the CCT Round 1 project ``LIMB Demonstration Project Extension and Coolside Demonstration'', described in a report to Congress (Babcock and Wilcox 1987), a paper by DePero et al. (1992), and in a report by Goots et al. (1992). The original limestone injection multistage burner (LIMB) demonstration work was conducted by Babcock and Wilcox Company (B and W) beginning in 1984, under the sponsorship of the US Environmental Protection Agency (EPA) and the State of Ohio Coal Development Office (OCDO). In 1987, B and W and the Ohio Edison Company agreed to extend the full-scale demonstration of LIMB technology under the sponsorship of DOE through its CCT Program, and with support from OCDO and Consolidation Coal Company, now known as CONSOL. In a separate effort, CONSOL had been developing another flue gas desulfurization (FGD) …

The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOD's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (1) To provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed. (2) To construct a full-size MW-class dual fuel power plant simulator. These objectives are planned to be achieved in the program coordinated with the Department of Energy, which has been funding a multiyear natural gas fueled direct fuel cell power plant program (DE-FC21-95MC31184) for civilian applications. Because many DARPA and DOE objectives are similar, the coordinated program activities are considered the most cost-effective for accomplishment of the program objectives. The DARPA/DOE joint program was launched in 1994. The DOE part of the program is expected to continue to Year 2000. The final output of this DOE program is to construct and operate a 2 MW power plant on an East Coast site. The site will be accessible to DOD energy/environmental systems base planners and logistics personnel …

The Project provides for the design, procurement, construction, assembly, installation, and acceptance testing of the National Ignition Facility (NIF), an experimental inertial confinement fusion facility intended to achieve controlled thermonuclear fusion in the laboratory by imploding a small capsule containing a mixture of the hydrogen isotopes deuterium and tritium. The NIF will be constructed at the Lawrence Livermore National Laboratory (LLNL), Livermore, California as determined by the Record of Decision made on December 19, 1996, as a part of the Stockpile Stewardship and Management Programmatic Environmental Impact Statement.

At the West Valley Demonstration Project (WVDP),the Vitrification Facility (VF)is designed to convert the high-level radioactive waste (HLW)stored on the site to a stable glass for disposal at a Department of Energy (DOE)-specified federal repository. The Scaled Vitrification System III (SVS-III)verification tests were conducted between February 1995 and August 1995 as a supplemental means to support the vitrification process flowsheet, but at only one seventh the scale.During these tests,the process flowsheet was refined and optimized. The SVS-III test series was conducted with a focus on confirming the applicability of the Redox Forecasting Model, which was based on the Index of Feed Oxidation (IFO)developed during the Functional and Checkout Testing of Systems (FACTS)and SVS-I tests. Additional goals were to investigate the prototypical feed preparation cycle and test the new target glass composition. Included in this report are the basis and current designs of the major components of the Scale Vitrification System and the results of the SVS-III tests.The major subsystems described are the feed preparation and delivery, melter, and off-gas treatment systems. In addition,the correlation between the melter's operation and its various parameters;which included feed rate,cold cap coverage,oxygen reduction (redox)state of the glass,melter power,plenum temperature,and airlift analysis;were developed.

No work was performed; the two remaining Multi Annular Swirl Burner test campaigns are on hold pending selection of a new test facility (replacement for the shut down UTSI burner test facility) and identification of associated testing costs. The Second-Generation PFB Combustion Plant conceptual design prepared in 1987 is being updated to reflect the benefit of pilot plant test data and the latest advances in gas turbine technology. The updated plant is being designed to operate with 95 percent sulfur capture and a single Siemens Westinghouse (SW) 501G gas turbine. Using carbonizer and gas turbine data generated by Foster Wheeler (FW) and SW respectively, Parsons Infrastructure & Technology prepared preliminary plant heat and material balances based on carbonizer operating temperatures of 1700 and 1800 F and found the former to yield the higher plant efficiency. As a result, 1700 F has been selected as the preferred operating condition for the carbonizer. The 501G gas turbine has an air compressor discharge temperature of 811EF and an exhaust temperature of 1140 F. Both of these streams represent high sources of heat and must be cooled, the air to 600 F to be compatible with a 650 F PCFB pressure vessel design temperature …

Eltron Research Inc., and team members, are developing an environmentally benign, inexpensive, and efficient method for separating hydrogen from gas mixtures produced during industrial processes, such as coal gasification. This project was motivated by the National Energy Technology Laboratory (NETL) Vision 21 initiative which seeks to economically eliminate environmental concerns associated with the use of fossil fuels. This objective is being pursued using dense membranes based in part on Eltron-patented ceramic materials with a demonstrated ability for proton and electron conduction. The technical goals are being addressed by modifying single-phase and composite membrane composition and microstructure to maximize proton and electron conductivity without loss of material stability. Ultimately, these materials must enable hydrogen separation at practical rates under ambient and high-pressure conditions, without deactivation in the presence of feedstream components such as carbon dioxide, water, and sulfur. During this quarter, it was demonstrated that increasing the transition metal loading in a model perovskite composition resulted in an increase in hydrogen flux. Improved flux corresponded to the emergence of additional phases in the ceramic membrane, and highest flux was achieved for a composite consisting of pseudo-cubic and rhombohedral perovskite phases. A 0.9-mm thick membrane of this material generated a hydrogen flux …

This is the third semi-annual technical progress report summarizing observations and tentative conclusions drawn from evaluations of the data captured to date from the operation of the ambient PM{sub 2.5} speciation sites in a geographical area encompassing southeastern Ohio, western Pennsylvania, and northwestern West Virginia. The overall goal of this program, called the Upper Ohio River Valley Project (UORVP), is to better understand the relationship between coal-based power system emissions and ambient air quality in the upper Ohio River Valley region through the collection of chemically resolved or speciated data. In order to provide a ''stand alone'' document, this report contains updated versions of Section 1 (Introduction) and Section 2 (Experimental) in their entirety from the first report.

This is the third semi-annual technical progress report summarizing observations and tentative conclusions drawn from evaluations of the data captured to date from the operation of the ambient PM{sub 2.5} speciation sites in a geographical area encompassing southeastern Ohio, western Pennsylvania, and northwestern West Virginia. The overall goal of this program, called the Upper Ohio River Valley Project (UORVP), is to better understand the relationship between coal-based power system emissions and ambient air quality in the upper Ohio River Valley region through the collection of chemically resolved or speciated data. In order to provide a ''stand alone'' document, this report contains updated versions of Section 1 (Introduction) and Section 2 (Experimental) in their entirety from the first report.

The interactions of mixed wastes containing radionuclides with solid rock surface and the mobility of the radionuclides in aquifer systems depend not only on the chemistry of the nuclides and the physico-chemical effects of radioactive decay, but also on the site-specific hydrogeology. Thus, to characterize contaminant transport, it is best to cross-check figures derived from any small-scale laboratory experiments over limited times with that obtained from field-oriented, natural analog studies. We propose such a study using the naturally-occurring U and Th decay-series disequilibria. The work of ours and other researchers have shown that the parent/daughter disequilibrium patterns existing in groundwater systems can be modeled in terms of local nuclide mass balance to arrive at such information as the rock-water contact time (fluid flow) and rates of contaminant transport, taking into account the retardation effect due to nuclide/rock interaction contaminants at INEL by grouping them into three categories, represented by isotopes of (1) Th and Pa, (2) U and (3) Ra. Mass spectrometric measurements of these elements will be emphasized in order to minimize sample size requirements and to maximize precision. Results will form the data base for a model code for computing: (1) Fluid residence time (transport rates) in the …

Advanced electronic magnetic resonance (EMR) as well as nuclear magnetic resonance (NMR) methods have been used to examine properties of coals, chars, and molecular species related to constituents of coal. During the span of this grant, progress was made on construction and applications to coals and chars of two high frequency EMR systems particularly appropriate for such studies--48 GHz and 95 GHz electron magnetic resonance spectrometer, on new low-frequency dynamic nuclear polarization (DNP) experiments to examine the interaction between water and the surfaces of suspended char particulates in slurries, and on a variety of proton nuclear magnetic resonance (NMR) techniques to measure characteristics of the water directly in contact with the surfaces and pore spaces of carbonaceous particulates.

A letter report issued by the General Accounting Office with an abstract that begins "In November 1997, the President called for the Department of Veterans Affairs (VA) and the Department of Defense (DOD) to create an interface that would allow the two agencies to share patient health information. By allowing health care providers to electronically share comprehensive patient information, computer-based patient record's (GCPR) should help VA, DOD, and the Indian Health Service (IHS) to improve the quality of care for their beneficiaries. But without a lead entity, a clear mission, and detailed planning to achieve that mission, it is difficult to monitor progress, identify project risks, and develop appropriate contingency plans to keep the project moving forward and on track. Critical project decisions were not made, and the agencies were not bound by those that were made. The VA and DOD Chief Information Officers' (CIO) action to focus on short-term deliverables and to capitalize on existing technologies is warranted and a step in the right direction. However, until problems with the two agencies' existing systems and issues regarding planning, management, and accountability are resolved, project costs will likely continue to increase and implementation of the larger GCPR effort--and its expected …

Faculty and students from five universities (Kentucky, West Virginia, Utah, Pittsburgh and Auburn) are collaborating on a basic research program to develop novel C1 chemistry processes for the production of clean, high quality transportation fuel. An Industrial Advisory Board (IAB) with members from Chevron, Eastman Chemical, Energy International, Teir Associates, and the Department of Defense has been formed to provide practical guidance to the program. The program has two principal objectives. (1) Develop technology for conversion of C1 source materials (natural gas, synthesis gas, carbon dioxide and monoxide, and methanol) into clean, high efficiency transportation fuel. (2) Develop novel processes for producing hydrogen from natural gas and other hydrocarbons. Some of the principal accomplishments of the program in its first two years are: (1) The addition of acetylenic compounds in Fischer-Tropsch synthesis is found to produce significant amounts of oxygenated products in FT diesel fuels. Such oxygenated products should decrease particulate matter (PM) emissions. (2) Nanoscale, binary, Fe-based catalysts supported on alumina have been shown to have significant activity for the decomposition of methane into pure hydrogen and potentially valuable multi-walled carbon nanotubes. (3) Catalytic synthesis processes have been developed for synthesis of diethyl carbonate, higher ethers, and higher alcohols …

This report presents a brief overview of the activities and tasks accomplished during the first half year (October 1, 2000-March 31, 2001) of the fourth project year budget period (October 1, 2000-September 30, 2001). An executive summary is presented initially followed by the tasks of the current budget period. Then, detailed description of the experimental and modeling investigations are presented. Subsequently, the technical and scientific results of the activities of this project period are presented with some discussions. The findings of this investigation are summarized in the ''Conclusions'' section followed by relevant references. The fourth project year activities are divided into three main parts, which are carried out in parallel. The first part is continuation of the experimental program that includes a study of the oil/water two-phase behavior at high pressures and control system development for the three-phase GLCC{copyright}. This investigation will be eventually extended for three-phase flow. The second part consists of the development of a simplified mechanistic model incorporating the experimental results and behavior of dispersion of oil in water and water in oil. This will provide an insight into the hydrodynamic flow behavior and serve as the design tool for the industry. Although useful for sizing GLCC{copyright} …

This is the second Quarterly Technical Report for DOE Cooperative Agreement No. DE-FC26-00NT40895. A statement of the project objectives is included in the Introduction of this report. Two biomass co-firing test burns have been conducted. In the first test, up to 20% by weight dry hardwood sawdust and dry switchgrass was co-milled Pratt seam coal. In the second test, also with Pratt seam coal, up to 10% by weight dry hardwood sawdust was injected through the center of the burner. Progress has continued in developing a modeling approach to synthesize the reaction time and temperature distributions that will be produced by computational fluid dynamic models of the pilot-scale combustion furnace and the char burnout and chemical reaction kinetics that will predict NOx emissions and unburned carbon levels in the furnace exhaust. Preliminary results of CFD modeling efforts have been received and Preparations are under way for continued pilot-scale combustion experiments.

None