We describe the design and operation of a high-throughput facility for synthesizing thousands of inorganic crystalline samples per year and evaluating them as potential scintillation detector materials. This facility includes a robotic dispenser, arrays of automated furnaces, a dual-beam X-ray generator for diffractometery and luminescence spectroscopy, a pulsed X-ray generator for time response measurements, computer-controlled sample changers, an optical spectrometer, and a network-accessible database management system that captures all synthesis and measurement data.

The carbon-to-oxygen ratios and graphitic nature of a rangeof black carbon standard reference materials (BC SRMs), high molecularmass humic-like substances (HULIS) and atmospheric particles are examinedusing scanning transmission X-ray microscopy (STXM) coupled with nearedge X-ray absorption fine structure (NEXAFS) spectroscopy. UsingSTXM/NEXAFS, individual particles with diameter>100 nm are studied,thus the diversity of atmospheric particles collected during a variety offield missions is assessed. Applying a semi-quantitative peak fittingmethod to the NEXAFS spectra enables a comparison of BC SRMs and HULIS toparticles originating from anthropogenic combustion and biomass burns,thus allowing determination of the suitability of these materials forrepresenting atmospheric particles. Anthropogenic combustion and biomassburn particles can be distinguished from one another using both chemicalbonding and structural ordering information. While anthropogeniccombustion particles are characterized by a high proportion ofaromatic-C, the presence of benzoquinone and are highly structurallyordered, biomass burn particles exhibit lower structural ordering, asmaller proportion of aromatic-C and contain a much higher proportion ofoxygenated functional groups.

The electronic structure of nanowires in contact withmetallic electrodes of experimentally relevant sizes is calculated byincorporating the electrostatic polarization potential into the atomisticsingle particle Schrodinger equation. We show that the presence of anelectrode produces localized electron/hole states near the electrode, aphenomenon only exhibited in nanostructures and overlooked in the past.This phenomenon will have profound implications on electron transport insuch nanosystems. We calculate several electrode/nanowire geometries,with varying contact depths and nanowire radii. We demonstrate the changein the band gap of up to 0.5 eV in 3 nm diameter CdSe nanowires andcalculate the magnitude of the applied electric field necessary toovercome the localization.

This paper describes the development of an electron gun for a sheet beam klystron. Initially intended for accelerator applications, the gun can operate at a higher perveance than one with a cylindrically symmetric beam. Results of 2D and 3D simulations are discussed.

None

A hydrogen safety sensor is presented which provides high sensitivity and fast response time when operated in air. The target application for the sensor is external deployment near systems using or producing high concentrations of hydrogen. The sensor is composed of a catalytically active metal-oxide sensing electrode and a noble metal reference electrode attached to an yttria-stabilized zirconia (YSZ) electrolyte. The sensing approach is based on the difference in oxidation rate of hydrogen on the different electrode materials. Results will be presented for a sensor using a sensing electrode of tin-doped indium oxide (ITO). Response to H{sub 2}, and cross-sensitivity to hydrocarbon and H{sub 2}O are discussed.

In 2003, Engelhard Corporation received a DOE award to develop a cost-effective, environmentally friendly approach to recover Pt from fuel cell membrane electrode assemblies (MEA’s). The most important precious metal used in fuel cells is platinum, but ruthenium is also added to the anode electrocatalyst if CO is present in the hydrogen stream. As part of the project, a large number of measurements of Pt and Ru need to be made. A low-cost approach to measuring Pt is using the industry standard spectrophotometric measurement of Pt complexed with stannous chloride. The interference of Ru can be eliminated by reading the Pt absorbance at 450 nm. Spectrophotometric methods for measuring Ru, while reported in the literature, are not as robust. This paper will discuss the options for measuring Pt and Ru using the method of UV-VIS spectrophotometry

Ovarian epithelial carcinomas (OEC) frequently exhibit amplifications at the 20q13 locus which is the site of several oncogenes, including the eukaryotic elongation factor EEF1A2 and the transcription factor ZNF217. We reported previously that overexpressed ZNF217 induces neoplastic characteristics in precursor cells of OEC. Unexpectedly, ZNF217, which is a transcriptional repressor, enhanced expression of eEF1A2. In this study, array comparative genomic hybridization, single nucleotide polymorphism and Affymetrix analysis of ZNF217-overexpressing cell lines confirmed consistently increased expression of eEF1A2 but not of other oncogenes, and revealed early changes in EEF1A2 gene copy numbers and increased expression at crisis during immortalization. We defined the influence of eEF1A2 overexpression on immortalized ovarian surface epithelial cells, and investigated interrelationships between effects of ZNF217 and eEF1A2 on cellular phenotypes. Lentivirally induced eEF1A2 overexpression caused delayed crisis, apoptosis resistance and increases in serum-independence, saturation densities, and anchorage independence. siRNA to eEF1A2 reversed apoptosis resistance and reduced anchorage independence in eEF1A2-overexpressing lines. Remarkably, siRNA to eEF1A2 was equally efficient in inhibiting both anchorage independence and resistance to apoptosis conferred by ZNF217 overexpression. Our data define neoplastic properties that are caused by eEF1A2 in nontumorigenic ovarian cancer precursor cells, and suggest that eEF1A2 plays a role in mediating ZNF217-induced …

The design of final focus systems for the next generation of linear colliders has evolved largely from the experience gained with the design and operation of the Stanford Linear Collider (SLC) and with the design of the Final Focus Test Beam (FFTB). We will compare the tolerances for two typical designs for a next-generation linear collider final focus system. The chromaticity generated by strong focusing systems, like the final quadrupole doublet before the interaction point of a linear collider, can be canceled by the introduction of sextupoles in a dispersive region. These sextupoles must be inserted in pairs separated by a -I transformation (Chromatic Correction Section) in order to cancel the strong geometric aberrations generated by sextupoles. Designs proposed for both the JLC or NLC final focus systems have two separate chromatic correction sections, one for each transverse plane separated by a ''{beta}-exchanger'' to manipulate the {beta}-function between the two CCS. The introduction of sextupoles and bending magnets gives rise to higher order aberrations (long sextupole and chrome-geometries) and radiation induced aberrations (chromaticity unbalance and ''Oide effect'') and one must optimize the lattice accordingly.

A stabilized, nodally integrated linear tetrahedral is formulated and analyzed. It is well known that linear tetrahedral elements perform poorly in problems with plasticity, nearly incompressible materials, and acute bending. For a variety of reasons, linear tetrahedral elements are preferable to quadratic tetrahedral elements in most nonlinear problems. Whereas, mixed methods work well for linear hexahedral elements, they don't for linear tetrahedrals. On the other hand, automatic mesh generation is typically not feasible for building many 3D hexahedral meshes. A stabilized, nodally integrated linear tetrahedral is developed and shown to perform very well in problems with plasticity, nearly incompressible materials and acute bending. Furthermore, the formulation is analytically and numerically shown to be stable and optimally convergent. The element is demonstrated to perform well in several standard linear and nonlinear benchmarks.

Consequence analysis to support documented safety analysis requires the use of one or more years of representative meteorological data for atmospheric transport and dispersion calculations. At minimum, the needed meteorological data for most atmospheric transport and dispersion models consist of hourly samples of wind speed and atmospheric stability class. Atmospheric stability is inferred from measured and/or observed meteorological data. Several methods exist to convert measured and observed meteorological data into atmospheric stability class data. In this paper, one year of meteorological data from a western Department of Energy (DOE) site is processed to determine atmospheric stability class using two methods. The method that is prescribed by the U.S. Nuclear Regulatory Commission (NRC) for supporting licensing of nuclear power plants makes use of measurements of vertical temperature difference to determine atmospheric stability. Another method that is preferred by the U.S. Environmental Protection Agency (EPA) relies upon measurements of incoming solar radiation, vertical temperature gradient, and wind speed. Consequences are calculated and compared using the two sets of processed meteorological data from these two methods as input data into the MELCOR Accident Consequence Code System 2 (MACCS2) code.

As we enter the era of petascale computing, system architects must plan for machines composed of tens of thousands or even hundreds of thousands of processors. Although fully connected networks such as fat-tree interconnects currently dominate HPC network designs, such approaches are inadequate for thousands of processors due to the superlinear growth of component costs. Traditional low-degree interconnect topologies, such as the 3D torus, have reemerged as a competitive solution because the number of switch components scales linearly with the node count, but such networks are poorly suited for the requirements of many scientific applications. We present our latest work on a hybrid switch architecture called HFAST that uses circuit switches to dynamically reconfigure a lower-degree interconnect to suit the topological requirements of each scientific application. This paper expands upon our prior work on the requirements of non-adaptive applications by analyzing the communication characteristics of dynamically adapting AMR code and presents a methodology that captures the evolving communication requirements. We also present a new optimization that computes the under-utilization of fat-tree interconnects for a given communication topology, showing the potential of constructing a ''fit-tree'' for the application by using the HFAST circuit switches to provision an optimal interconnect topology for …

Biological Aerosol Mass Spectrometry (BAMS) is an emerging technique for the detection of biological aerosols, which is being developed at Lawrence Livermore National Laboratory. The current system uses several orthogonal analytical methods to improve system selectivity, sensitivity and speed in order to maximize its utility as a biological aerosol detection system with extremely low probability of false alarm and high probability of detection. Our approach is to pre-select particles of interest by size and fluorescence prior to mass spectral analysis. The ability to distinguish biological aerosols from background and to discriminate bacterial spores, vegetative cells, viruses and toxins from one another will be shown. Data from particle standards of known chemical composition will be discussed. Analysis of ambient particles will also be presented.

As retail choice states reach the end of their transitional, rate-cap periods, state regulators must decide what type of default supply service to provide to customers that have not switched to a competitive retail supplier. In a growing number of states, regulators have adopted real-time pricing (RTP) as the default service for large commercial and industrial (C&I) customers. Although this trend is driven chiefly by policy objectives related to retail competition, default service RTP may have the added benefit of stimulating demand response. To evaluate the potential role of RTP as a means to both ends--retail market development and demand response--we conducted a comprehensive review of experience with default RTP in the U.S. and examined the emergence of RTP as a product offering by competitive retail suppliers. Across the ten utilities with default RTP in place in 2005, between 5% and 35% of the applicable load remained on the rate. Based on interviews with competitive retailers, we find evidence to suggest that a comparable amount of load in these states has switched to hourly pricing arrangements with competitive retailers. Many customers on default or competitive hourly pricing are paying prices indexed to the real-time spot market, and thus have no …

We review on-shell methods for computing multi-parton scattering amplitudes in perturbative QCD, utilizing their unitarity and factorization properties. We focus on aspects which are useful for the construction of one-loop amplitudes needed for phenomenological studies at the Large Hadron Collider.

The High Energy and Nuclear Physics Data Access GrandChallenge project has developed an optimizing storage access softwaresystem that was prototyped at RHIC. It is currently undergoingintegration with the STAR experiment in preparation for data taking thatstarts in mid-2000. The behavior and lessons learned in the RHIC MockData Challenge exercises are described as well as the observedperformance under conditions designed to characterize scalability. Up to250 simultaneous queries were tested and up to 10 million events across 7event components were involved in these queries. The system coordinatesthe staging of "bundles" of files from the HPSS tape system, so that allthe needed components of each event are in disk cache when accessed bythe application software. The caching policy algorithm for thecoordinated bundle staging is described in the paper. The initialprototype implementation interfaced to the Objectivity/DB. In this latestversion, it evolved to work with arbitrary files and use CORBA interfacesto the tag database and file catalog services. The interface to the tagdatabase and the MySQL-based file catalog services used by STAR aredescribed along with the planned usage scenarios.

We are studying the response of a CVD diamond detector to a strong x-ray pulse followed by a second weaker pulse arriving 50 to 300 ns later, with a contrast in amplitude of about 1000. These tests, performed at the LLNL Jupiter laser facility, are intended to produce charge carrier densities similar to those expected during a DT implosion at NIF, where a large 14.1 MeV neutron pulse is followed by a weak downscattered neutron signal produced by slower 6-10 MeV neutrons. The number of downscattered neutrons must be carefully measured in order to obtain an accurate value for the areal density, which is proportional to the ratio of downscattered to primary neutrons. The effects of the first strong pulse may include saturation of the diamond wafer, saturation of the oscilloscope, or saturation of the associated power and data acquisition electronics. We are presenting a double pulse experiment that will use a system of several polycrystalline CVD diamond detectors irradiated by 8.6 keV x-rays emitted from a zinc target. We will discuss implication for a NIF areal density measurement.

The authors perform the first three-dimensional measurement of the amplitudes of B {yields} {psi}(2S)K* and B {yields} {chi}{sub c1}K* decays and update the previous measurement B {yields} J/{psi}K*. They use a data sample collected with the BABAR detector at the PEP-II storage ring, corresponding to 232 million B{bar B} pairs. The longitudinal polarization of decays involving a J{sup PC} = 1{sup ++} {chi}{sub c1} meson is found to be larger than that with a 1{sup --} J/{psi} or {psi}(2S) meson. No direct CP-violating charge asymmetry is observed.

Hard x-ray (''Thin wall'') imaging will be employed on the National Ignition Facility (NIF) to spatially locate laser beam energy deposition regions on the hohlraum walls in indirect drive Inertial Confinement Fusion (ICF) experiments, relevant for ICF symmetry tuning. Based on time resolved imaging of the hard x-ray emission of the laser spots, this method will be used to infer hohlraum wall motion due to x-ray and laser ablation and any beam refraction caused by plasma density gradients. In optimizing this measurement, issues that have to be addressed are hard x-ray visibility during the entire ignition laser pulse with intensities ranging from 10{sup 13} to 10{sup 15} W/cm{sup 2}, as well as simultaneous visibility of the inner and the outer laser drive cones. In this work we will compare the hard x-ray emission calculated by LASNEX and analytical modeling with thin wall imaging data recorded previously on Omega and during the first hohlraum experiments on NIF. Based on these calculations and comparisons the thin wall imaging will be optimized for ICF/NIF experiments.

The authors measure the absolute branching fraction for D{sup 0} {yields} K{sup -} {pi}{sup +} using partial reconstruction of {bar B}{sup 0} {yields} D*{sup +}X{ell}{sup -}{bar {nu}}{sub {ell}} decays, in which only the charged lepton and the pion from the decay D*{sup +} {yields} D{sup 0}{pi}{sup +} are used. Based on a data sample of 230 million B{bar B} pairs collected at the {Upsilon}(4S) resonance with the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC, they obtain {Beta}(D{sup 0} {yields} K{sup -}{pi}{sup +}) = (4.007 {+-} 0.037 {+-} 0.070)%, where the first error is statistical and the second error is systematic.

Algebraic multigrid (AMG) solves linear systems based on multigrid principles, but in a way that only depends on the coefficients in the underlying matrix. The author begins with a basic introduction to AMG methods, and then describes some more recent advances and theoretical developments

Motivation. The power of multi-sequence comparison forbiological discovery is well established and sequence data from a growinglist of organisms is becoming available. Thus, a need exists forcomputational strategies to visually compare multiple aligned sequencesto support conservation analysis across various species. To be efficientthese visualization algorithms require the ability to universally handlea wide range of evolutionary distances while taking into accountphylogeny Results. We have developed Phylo-VISTA, an interactive tool foranalyzing multiple alignments by visualizing the similarity of DNAsequences among multiple species while considering their phylogenicrelationships. Features include a broad spectrum of resolution parametersfor examining the alignment and the ability to easily compare any subtreeof sequences within a complete alignment dataset. Phylo-VISTA uses VISTAconcepts that have been successfully applied previously to a wide rangeof comparative genomics data analysis problems. Availability Phylo-VISTAis an interactive java applet available for downloading athttp://graphics.cs.ucdavis.edu/~;nyshah/Phylo-VISTA. It is also availableon-line at http://www-gsd.lbl.gov/phylovista and is integrated with theglobal alignment program LAGAN athttp://lagan.stanford.edu.Contactphylovista@lbl.gov

The authors present updated measurements of time-dependent CP asymmetries in fully-reconstructed neutral B decays to several CP eigenstates containing a charmonium meson. The measurements use a data sample of (383 {+-} 4) x 10{sup 6} {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at the PEP-II B factory. They determine sin2{beta} = 0.714 {+-} 0.032(stat) {+-} 0.018(syst) and |{lambda}| = 0.952 {+-} 0.022(stat) {+-} 0.017(syst).

We studied the problematic of uncertainties in the diffuse gamma radiation apparent in stacking analysis of EGRET data at low Galactic latitudes. Subsequently, we co-added maps of counts, exposure and diffuse background, and residuals, in varying numbers for different sub-categories of putatively and known source populations (like PSRs). Finally we tested for gamma-ray excess emission in those maps and attempt to quantify the systematic biases in such approach. Such kind of an analysis will help the classification processes of sources and source populations in the GLAST era.