Understanding the thermodynamic properties of multicomponent mixtures is of critical importance in many chemical and industrial applications. Experimental measurements become progressively difficult as the number of solution components increases -- producing the need for predictive models. Problems in development of predictive models arise if the mixture has one or more components that interact through molecular complexation or association. Experimental solubilities of anthracene and pyrene dissolved in binary systems containing one or more alcohols were measured in order to address this problem. Alcohols examined in this study were: 1-propanol, 2-propanol, 1-butanol, 2-butanol, 2-methyl-1-propanol, 3-methyl-1-butanol, and 1-octanol. In binary solvent mixtures containing only a single self-associating alcoholic solvent, the alkane cosolvents studied were: n-hexane, n-heptane, n-octane, 2,2,4-trimethylpentane, cyclohexane, methylcyclohexane, tert-butylcyclohexane. Predictive solubility equations were developed using mobile order theory. This approach differs from classical solution models by representing hydrogen bonding with a probability term rather than with expressions derived from stepwise equilibria or expressions to represent hypothetical solution aggregates. Results were compared with the predicted solubilities found from using expressions developed using the Kretschmer-Wiebe and Mecke-Kempter approaches for modeling associated solutions. It was found that the mobile order approach provided reasonably accurate predictions for the solute solubilities in the systems studied. The …

Several studies were done to illustrate the versatillity of the Abraham model in mathematically describing the various solute-solvent interactions found in a wide range of different chemical and biological systems. The first study focused on using the solvation model to construct mathematical correlations describing the minimum inhibitory concentration of organic compounds for growth inhibition towards the three bacterial strains Porphyromonas gingivalis, Selenomonas artemidis, and Streptococcus sobrinus. The next several studies expand the practicallity of the Abraham model by predicting free energies of partition in chemical systems. The free energy studies expand the use of the Abraham model to other temperatures and properties by developing correlations for the enthalpies of solvation of gaseous solutes of various compounds dissolved in water, 1-octanol, hexane, heptane, hexadecane, cyclohexane, benzene, toluene, carbon tetrachloride, chloroform, methanol, ethanol, 1-butanol, propylene carbonate, dimethyl sulfoxide, 1,2-dichloroethane, N,N-dimethylformamide, tert-butanol, dibutyl ether, ethyl acetate, acetonitrile, and acetone. Also, a generic equation for linear alkanes is created for use when individual datasets are small. The prediction of enthalpies of solvation is furthered by modifying the Abraham model so that experimental data measured at different temperatures can be included into a single correlation expression. The temperature dependence is directly included in the model …

Substitution of the 1,5-cyclooctadiene (cod) ligand in PtCl2(cod) (1) by the diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) yields PtCl2(bpcd) (2). Knoevenagel condensation of 2 with 9-anthracenecarboxaldehyde leads to the functionalization of the bpcd ligand and formation of the corresponding 2-(9-anthracenylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (abpcd) substituted compound PtCl2(abpcd) (3), which is also obtained from the direct reaction of 1 with the abpcd ligand in near quantitative yield. The reaction of 3 with disodium maleonitriledithiolate (Na2mnt) affords the chelating dithiolate compound Pt(mnt)(abpcd) (4). The reaction of PtCl2(bpcd) (2) with 4-methyl-1,2-benzene dithiol under basic conditions affords Pt(tdt)(bpcd) (5). Compounds 2-5 have been fully characterized in solution by IR and NMR spectroscopies (1H and 31P), and their molecular structures established by X-ray crystallography. The electrochemical properties of 2‑5 have examined by cyclic voltammetry, and the nature of the HOMO and LUMO levels in systems 2-4 has been established by MO calculations at the extended Hückel level, the results of which are discussed with respect to electrochemical data and related diphosphine derivatives. In addition the new compounds 2-5 have been isolated by column chromatography and characterized by IR, UV-Vis spectroscopy.

The major topics discussed are all relevant to the bright phosphorescent emissions of coinage metal complexes (Cu(I), Ag(I) and Au(I)) with an explanation of the theoretical background, computational results and ongoing work on the application in materials and optoelectronic devices. Density functional computations have been performed on the majority of the discussed complexes and determined that the most significant distortion that occurs in Au(I)-phosphine complexes is a near and beyond a T-shape within the P-Au-P angle when the complexes are photoexcited to the lowest phosphorescent excited state. The large distortion is experimentally qualified with the large Stokes' shift that occurs between the excitation and emission spectra and can be as large as 18 000 cm-1 for the neutral Au(I) complexes. The excited state distortion has been thoroughly investigated and it is determined that not only is it pertinent to the efficient luminescence but also for the tunability in the emission. The factors that affect tunability have been determined to be electronics, sterics, rigidity of solution and temperature. The luminescent shifts determined from varying these parameters have been described systematically and have revealed emission colors that span the entire visible spectrum. These astounding features that have been discovered within studies of …

The optimal conditions for deposition of zinc-nickel alloys onto stainless steel discs in alkaline solutions have been examined. In the past cadmium has been used because it shows good corrosion protection, but other methods are being examined due to the high toxicity and environmental threats posed by its use. Zinc has been found to provide good corrosion resistance, but the corrosion resistance is greatly increased when alloyed with nickel. The concentration of nickel in the deposit has long been a debated issue, but for basic solutions a nickel concentration of 8-15% appears optimal. However, deposition of zinc-nickel alloys from acidic solutions has average nickel concentrations of 12-15%. Alkaline conditions give a more uniform deposition layer, or better metal distribution, thereby a better corrosion resistance. Although TEA (triethanolamine) is most commonly used to complex the metals in solution, in this work I examined TEA along with other complexing agents. Although alkaline solutions have been examined, most research has been done in pH ≥ 12 solutions. However, there has been some work performed in the pH 9.3-9.5 range. This work examines different ligands in a pH 9.3-9.4 range. Direct potential plating and pulse potential plating methods are examined for optimal platings. The …

A study was conducted to investigate the relationship of students' concept integration and achievement with time spent within a topic and across related topics in a large first semester guided inquiry organic chemistry class. Achievement was based on evidence of algorithmic problem solving; and concept integration was based on demonstrated performance explaining, applying, and relating concepts to each other. Twelve individual assessments were made of both variables over three related topics - acid/base, nucleophilic substitution and electrophilic addition reactions. Measurements included written, free response and ordered multiple answer questions using a classroom response system. Results demonstrated that students can solve problems without conceptual understanding. A second study was conducted to compare the students' learning approach at the beginning and end of the course. Students were scored on their preferences for a deep, strategic, or surface approach to learning based on their responses to a pre and post survey. Results suggest that students significantly decreased their preference for a surface approach during the semester. Analysis of the data collected was performed to determine the relationship between students' learning approach and their concept integration and achievement in this class. Results show a correlation between a deep approach and concept integration and a …

The gas phase reactions of atomic chlorine with hydrogen sulfide, ammonia, benzene, and ethylene are investigated using the laser flash photolysis / resonance fluorescence experimental technique. In addition, the kinetics of the reverse processes for the latter two elementary reactions are also studied experimentally. The absolute rate constants for these processes are measured over a wide range of conditions, and the results offer new accurate information about the reactivity and thermochemistry of these systems. The temperature dependences of these reactions are interpreted via the Arrhenius equation, which yields significantly negative activation energies for the reaction of the chlorine atom and hydrogen sulfide as well as for that between the phenyl radical and hydrogen chloride. Positive activation energies which are smaller than the overall endothermicity are measured for the reactions between atomic chlorine with ammonia and ethylene, which suggests that the reverse processes for these reactions also possess negative activation energies. The enthalpies of formation of the phenyl and β-chlorovinyl are assessed via the third-law method. The stability and reactivity of each reaction system is further rationalized based on potential energy surfaces, computed with high-level ab initio quantum mechanical methods and refined through the inclusion of effects which arise from the …

To investigate conditions of silver electroless deposition on silicon (100), optical microscope, atomic force microscope (AFM) and attenuated total reflection infrared spectroscopy (ATR-FTIR) spectroscopy were used. Twenty second dipping in 0.8mM AgNO3/4.9% solution coats a silicon (100) wafer with a thin film of silver nanoparticles very well. According to AFM results, the diameter of silver particles is from 50 to 100nm. After deposition, arithmetic average of absolute values roughness (Ra) increased from ~0.7nm to ~1.2nm and the root mean square roughness (Rq) is from ~0.8nm to ~1.5nm. SCN- ions were applied to detect the existence of silver on silicon surface by ATR-FTIR spectroscopy and IR spectra demonstrate SCN- is a good adsorbent for silver metal. Patina is the general name of copper basic salts which forms green-blue film on the surface of ancient bronze architectures. Patina formation has been found on the surface of platinum or ruthenium after several scans of cyclic voltammetry in 2mM CuSO4/0.1M K2SO4, pH5 solution. Evidence implies that oxygen reduction reaction (ORR) triggers the patina formation. ORR is an important step of fuel cell process and only few sorts of noble metals like platinum can be worked as the catalyst of ORR. Mechanisms of patination involving …

The development of the correlation consistent basis sets, cc-pVnZ (where n = D, T, Q, etc.) have allowed for the systematic elucidation of the intrinsic accuracy of ab initio quantum chemical methods. In density functional theory (DFT), where the cc-pVnZ basis sets are not necessarily optimal in their current form, the elucidation of the intrinsic accuracy of DFT methods cannot always be accomplished. This dissertation outlines investigations into the basis set requirements for DFT and how the intrinsic accuracy of DFT methods may be determined with a prescription involving recontraction of the cc-pVnZ basis sets for specific density functionals. Next, the development and benchmarks of a set of cc-pVnZ basis sets designed for the s-block atoms lithium, beryllium, sodium, and magnesium are presented. Computed atomic and molecular properties agree well with reliable experimental data, demonstrating the accuracy of these new s-block basis sets. In addition to the development of cc-pVnZ basis sets, the development of a new, efficient formulism of the correlation consistent Composite Approach (ccCA) using the resolution of the identity (RI) approximation is employed. The new formulism, denoted 'RI-ccCA,' has marked efficiency in terms of computational time and storage, compared with the ccCA formulism, without the introduction of …

Web-based homework systems are becoming more common in general chemistry as instructors face ever-increasing enrollment. Yet providing meaningful feedback on assignments remains of the utmost importance. Chemistry instructors consider completion of homework integral to students' success in chemistry, yet only a few studies have compared the use of Web-based systems to the traditional paper-and-pencil homework within general chemistry. This study compares the traditional homework system to four different Web-based systems. Data from eight, semester classes consisting of a diagnostic pre-test, final semester grades, and the number of successful and unsuccessful students are analyzed. Statistically significant results suggest a chemistry instructor should carefully consider options when selecting a homework system.

Aluminum was deposited onto both Teflon AF and Parylene AF surfaces by chemical vapor deposition of trimethylaluminum. This work shows that similar thin film (100 Angstroms) aluminum oxide adlayers form on both polymers at the low temperature dosing conditions used in the studies. Upon anneal to room temperature and above, defluorination of the polymer surfaces increased and resulted in fluorinated aluminum oxide adlayers; the adlayers were thermally stable to the highest temperatures tested (600 K). Angle-resolved spectra showed higher levels of fluorination toward the polymer/adlayer interface region. Copper films were also deposited at low temperature onto Teflon AF using a copper hexafluoroacetylacetonate-cyclooctadiene precursor. Annealing up to 600 K resulted in the loss of precursor ligands and a shift to metallic copper. As with aluminum adlayers, some polymer defluorination and resulting metal (copper) fluoride was detected. Parylene AF and polystyrene films surfaces were modified by directly dosing with water vapor passed across a hot tungsten filament. Oxygen incorporation into polystyrene occurred exclusively at aromatic carbon sites, whereas oxygen incorporation into parylene occurred in both aromatic and aliphatic sites. Oxygen x-ray photoelectron spectra of the modified polymers were comparable, indicating that similar reactions occurred. The surface oxygenation of parylene allowed enhanced reactivity …

The novel instrumentation of nanomanipulation coupled to nanospray mass spectrometry and its applications are presented. The nanomanipulator has the resolution of 10nm step sizes allowing for specific fine movement used to probe and characterize objects of interest. Nanospray mass spectrometry only needs a minimum sample volume of 300nl and a minimum sample size of 300attograms to analyze an analyte making it the ideal instrument to couple to nanomanipulation. The nanomanipulator is mounted to an inverted microscope and consists of 4 nano-positioners; these nano-positioners hold end-effectors and other tools used for manipulation. This original coupling has been used to enhance the current abilities of cellular probing and trace fiber analysis. Experiments have been performed to demonstrate the functionality of this instrument and its capabilities. Histidine and caffeine have been sampled directly from single fibers and analyzed. Lipid bodies from cotton seeds have been sampled indirectly and analyzed. The few applications demonstrated are only the beginning of nanomanipulation coupled to nanospray mass spectrometry and the possible applications are numerous especially with the ability to design and fabricate new end-effectors with unique abilities. Future study will be done to further the applications in direct cellular probing including toxicology studies and organelle analysis of …

Flat dendrimers, consisting of a hexavalent aromatic core and rigid ethynyl units locked in place by ether connections were developed based upon the divergent synthetic method. Alternating functional groups were adopted on each site of the hexa-substituted benzene, in order to avoid undesired cyclization pathways. The flat structures of conjugated dendrimers would allow investigation on the discotic liquid crystal properties. In addition, these ethylnyl dendrimers are expected to show directed energy and electron transfer with a highly conjugated system, and thus are effective in the preparation of photoreactive materials such as electronic sensors or light harvesting materials. Conjugated polycyclic aromatic hydrocarbons, consisting of naphthalene, anthracene, pyrene, and phenanthrene groups connected via 1,3,5-triethynylbenzene cores, were synthesized. These molecules exhibited luminescence properties and the π-complexation with a mercury trifunctional lewis acid are expected to enhance the phosphorescence in the presence of the heavy metal due to the spin-orbit coupling. Besides, owing to the presence of heavy metal atom in the Au (I) complexes linked by s-bonded triethynyltriphenylene luminophore, the phosphorescence occurs from a metal-centered emission. The conjugated organic luminophores have been developed to produce excellent quantum efficiencies, brightness, and long lifetimes.

In recent years, advances in computer technology combined with new ab initio computational methods have allowed for dramatic improvement in the prediction of energetic properties. Unfortunately, even with these advances, the extensive computational cost, in terms of computer time, memory, and disk space of the sophisticated methods required to achieve chemical accuracy - defined as 1 kcal/mol from reliable experimental data effectively - limits the size of molecules [i.e. less than 10-15 non-hydrogen atoms] that can be studied. Several schemes were explored to help reduce the computational cost while still maintaining chemical accuracy. Specifically, a study was performed to assess the accuracy of ccCA to compute atomization energies, ionization potentials, electron affinities, proton affinities, and enthalpies of formation for third-row (Ga-Kr) containing molecules. Next, truncation of the correlation consistent basis sets for the hydrogen atom was examined as a possible means to reduce the computational cost of ab initio methods. It was determined that energetic properties could be extrapolated to the complete basis set (CBS) limit utilizing a series of truncated hydrogen basis sets that was within 1 kcal/mol of the extrapolation of the full correlation consistent basis sets. Basis set truncation for the hydrogen atom was then applied to …

Density functional (ca, BLYP, BPW91, B3LYP and B3PW91), MP2 and CCSD(T) methods in combination with LANL2DZ or cc-pVxZ-PP (where x=D(double), T(triple) Q(quadruple), and 5(quintuple)) basis sets have been employed in computing electronic transition energies of zinc and cadmium monomers. CCSD(T)/aug-cc-pV5Z-PP combination finds values that are 150 cm-1 from the experimental value for the zinc monomer and 240 cm-1 remove from the cadmium monomer excitation experimental value. These method/basis set combinations are also used to find spectroscopic values (re, De, we, wexe, Be , and Te) that rival experimental values for dimers and excimers. Examples of this can be seen with the CCSD(T)/aug-cc-pV5Z-PP combination phosphorescent emission results. The values found are within 120 cm-1 of the zinc emission energy and 290 cm-1 of the cadmium emission energy. While this combination rigorously models spectroscopic constants for monomers, dimers, and excimers, it does not efficiently model these constants for larger clusters with available modern computational resources. It is important to show spectroscopic trends (bonding, phosphorescent excitation and emissions) as clusters increase as the monomer and dimer emission energies do not model solid state metallophilic interactions and phosphorescence. The MP2/LANL2DZ combinations show qualitative cooperative bonding trends in group oligomers and extended excimers as size …

Substitution of MeCN ligands in the activated cluster Os3(CO)10(MeCN)2 by the unsaturated diphosphine ligands (Z)-Ph2PCH=CHPPh2 (cDPPEn) or 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) proceeds rapidly at room temperature to furnish the ligand-bridged cluster 1,2-Os3(CO)10(P-P) (P-P represents cDPPEn or bpcd). Heating 1,2-Os3(CO)10(P-P) leads to the formation of the thermodynamically more stable chelating isomer 1,1-Os3(CO)10(P-P). Each compound of Os3(CO)10(P-P) has been characterized by x-ray diffraction, IR, 31P NMR and 1H NMR. Ligand isomerization kinetics have been investigated by UV-VIS and 31P NMR (for cDPPEn) or 1H NMR (for bpcd) spectroscopies. The isomerization mechanism is discussed based on the activation parameters and CO inhibition (for cDPPEn) or ligand trapping experiments (for bpcd). Thermolysis of 1,1-Os3(CO)10(bpcd) in refluxing toluene gives the hydrido cluster HOs3(CO)9[μ-(PPh2)C=C{PPh(C6H4)}C(O)CH2C(O)] and the benzyne cluster HOs3(CO)8(μ3-C6H4)[μ2,η1-PPhC=C(PPh2)C(O)CH2C(O)]. Photolysis of 1,1-Os3(CO)10(bpcd) using near UV light affords HOs3(CO)9[μ-(PPh2)C=C{PPh(C6H4)}C(O)CH2C(O)] as the sole product. HOs3(CO)8(μ3-C6H4)[μ2,η1-PPhC=C(PPh2)C(O)CH2C(O)] has been characterized in solution by IR and NMR spectroscopies. Furthermore its molecular structure has been determined by X-ray crystallography. Reversible C-H bond formation in HOs3(CO)9[μ-(PPh2)C=C{PPh(C6H4)}C(O)CH2C(O)] is demonstrated by ligand trapping studies to give 1,1-Os3(CO)9L(bpcd) (where L = CO, phosphine) via the unsaturated intermediate 1,1-Os3(CO)9(bpcd). The kinetics for reductive coupling in HOs3(CO)9[γ-(PPh2)C=C{PPh(C6H4)}C(O)CH2C(O)] and DOs3(CO)9[μ-(PPh2-d10)C=C{P(Ph-d5)(C6D4)}C(O)CH2C(O)] in the presence of PPh3 give rise to a kH/kD value …

An extensive study of disubstituted cycloalkanes like CnH2n where n=3,4,5 and 6 using DFT((U)B3LYP/6-31G(d) and 6-311+G(2df,2p)) calculations is presented focusing on the effect of pyramidalization of the radical center. A potential energy surface (PES) analysis shows that the radical prefers to pyramidalize anti to the two cis fluorines in the disubstituted cycloalkanes. The degree of pyramidalization for 1,2-difluorocyclopropyl radical is 43.9o away from the cis fluorines whereas for 1,3-difluorocyclobutyl radical, 1,3-difluorocyclopentyl radical and 1,3-difluorocyclohexyl radical is 3.8o, 5.4o and 14.5o respectively away from the cis fluorines. The importance of this pyramidality effect in these compounds is discussed in context with the carbon-hydrogen bond dissociation energies (BDE's) because the preference of the radical centers to pyramidalize anti to the fluorines affects the bond dissociation energy. Importance of steric effect and unfavorable electronic interactions have been extensively explored in planar permethylated cyclobutadiene (Me4CBD) and cyclooctatetraene (Me8COT) using ((U)B3LYP/6-31G(d) and 6-311+G(2df,2p)) calculations. It is thought that steric interactions dominate electronic interactions in Me8COT, while this works opposite in case of Me4CBT. Instead, in Me4CBD the number of unfavorable electronic interactions between π bonds and out-of-plane hydrogens plays the dominant role in determining the relative energies. Interactions between the π bonds of CBD and …

The dissertation consists of the following three sections: 1. Hydroxyapatite (HA) coatings. In this work, we deposited HA precursor films from weak basic electrolytic solution (pH= 8-9) via an electrochemical approach; the deposits were changed into crystallite coatings of hydroxyapatite by sintering at specific temperatures (600-800 ºC). The formed coatings were mainly characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). XRD patterns show well-defined peaks of HA when sintered under vacuum conditions. FTIR measurements indicate the existence of hydroxyl groups, which were confirmed by the characteristic intensity of the stretching and bending bands at ~3575 and ~630 cm-1, respectively. The SEM shows an adhesive, crack free morphology for the double-layer coating surface of the samples sintered in a vacuum furnace. 2. Silver/polymer/clay nanocomposites. Silver nanoparticles were prepared in layered clay mineral (montmorillonite)/polymer (PVP: poly (vinyl pyrrolidone)) suspension by an electrochemical approach. The silver particles formed in the bulk suspension were stabilized by the PVP and partially exfoliated clay platelets, which acted as protective colloids to prevent coagulation of silver nanoparticles together. The synthesized silver nanoparticles/montmorillonite/PVP composite was characterized and identified by XRD, SEM, and TEM (transmission electron microscopy) measurements. 3. Ce-doped lead …

Quinoxaline-functionalized, cage-annulated oxa- and thiacrown ethers have been synthesized as possible specific metal host systems. The synthesis and characterization of quinoxaline-functionalized, cage-annulated oxa- and thiacrown ethers have been described. The characterization of these host systems have been fully achieved in solution by using various techniques such as IR, 1H NMR, and 13C NMR spectroscopic methods, high-resolution mass spectrometry (HRMS), elemental microanalysis, and X-ray crystallographic analysis in case of one quinoxaline-functionalized, cage-annulated oxacrown ether compound. The synthesis of the diphosphine ligand 2,3-bis(diphenylphosphino)-N-p-tolylmaleimide (bmi) is described. The substitution of the MeCN ligands in the activated cluster 1,2-Os3(CO)10(MeCN)2 by the diphosphine ligand bmi proceeds rapidly at room temperature to furnish a mixture of bridging and chelating Os3(CO)10(bmi) isomers and the ortho-metalated product HOs3(CO)9[μ-(PPh2)C=C{PPh(C6H4)}C(O)N(tolyl-p)C(O)]. Thermolysis of the bridging isomer 1,2-Os3(CO)10(bmi) under mild conditions gives the chelating isomer 1,1-Os3(CO)10(bmi), whose molecular structure has been determined by X-ray crystallography. The kinetics for the ligand isomerization have been investigated by UV-vis and 1H NMR spectroscopy in toluene solution over the temperature range of 318-348 K. On the basis of kinetic data conducted in the presence of added CO and the Eyring activation parameters, a non-dissociative phosphine migration across one of the Os-Os bonds is proposed. Orthometalation of …

To form Cu interconnects, dual-damascene techniques like chemical mechanical planarization (CMP) and post-CMP became inevitable for removing the "overburden" Cu and for planarizing the wafer surface. During the CMP processing, Cu interconnects and barrier metal layers experience different electrochemical interactions depending on the slurry composition, pH, and ohmic contact with adjacent metal layers that would set corrosion process. Ruthenium as a replacement of existing diffusion barrier layer will require extensive investigation to eliminate or control the corrosion process during CMP and post CMP. Bimetallic corrosion process was investigated in the ammonium citrate (a complexing agent of Cu in CMP solutions) using micro test patterns and potentiodynamic measurements. The enhanced bimetallic corrosion of copper observed is due to noble behavior of the ruthenium metal. Cu formed Cu(II)-amine and Cu(II)-citrate complexes in alkaline and acidic solutions and a corrosion mechanism has been proposed. The currently used metallization process (PVD, CVD and ALD) require ultra-high vacuum and are expensive. A novel method of Si surface metallization process is discussed that can be achieved at room temperature and does not require ultra-high vacuum. Ruthenation of Si surface through strong Si-Ru covalent bond formation is demonstrated using different ruthenium carbonyl compounds. RBS analysis accounted for …

Novel cage-functionalized azacrown ethers, i.e. 51, 52, 53, 55, 57, 61 and 62, which have various crown cavity and different number of nitrogen atoms incorporated, have been prepared. X-ray structures of 53, 55 and 57 have been obtained for the study of the crown topological structure. The complexation properties of crown 51, 52, 57, 61 and 62 have been evaluated via alkali metal picrate extraction, silver picrate extraction and ESI-MS study. The novel cage-fuctionalized azacrown ethers generally exhibit high avidity and selectivity towards Ag+ versus alkali metal ions and some transition metals i.e. Cu2+, Mn2+, Zn2+, Ni2+ and Pb2+. Crown 61 displays significant avidity and selectivity toward K+ in alkali metal picrate extraction experiments vis-à-vis the remaining alkali metal picrates. Three types of ditopic ion-exchange receptors for sodium hydroxide extraction study have been designed. All of the crown ether molecules have proper cavity for selective sodium complexation and have weakly acidic ionizable alcohols for sodium-proton exchange under strongly basic conditions. Crown 80 and 81 were synthesized; key intermediates for the synthesis of crown 82, 83 and 84 have been prepared. The preparation of 99 afforded an unexpected crown 103. The preparation of 109 had been attempted, but could not be …

Adherent Cu films were electrodeposited onto polycrystalline W foils from purged solutions of 0.05 M CuSO4 in H2SO4 supporting electrolyte and 0.025 M CuCO3∙Cu(OH)2 in 0.32 M H3BO3 and corresponding HBF4 supporting electrolyte, both at pH = 1. Films were deposited under constant potential conditions at voltages between -0.6 V and -0.2 V versus Ag/AgCl. All films produced by pulses of 10 s duration were visible to the eye, copper colored, and survived a crude test called "the Scotch tape test", which involves sticking the scotch tape on the sample, then peeling off the tape and observing if the copper film peels off or not. Characterization by scanning electron microscopy (SEM)/energy dispersive X-ray (EDX) and X-ray photon spectroscopy (XPS) confirmed the presence of metallic Cu, with apparent dendritic growth. No sulfur impurity was observable by XPS or EDX. Kinetics measurements indicated that the Cu nucleation process in the sulfuric bath is slower than in the borate bath. In both baths, nucleation kinetics does not correspond to either instantaneous or progressive nucleation. Films deposited from 0.05 M CuSO4/H2SO4 solution at pH > 1 at -0.2 V exhibited poor adhesion and decreased Cu reduction current. In both borate and sulfate baths, small …

An iodine surface layer has been prepared on Ru(poly) and Ru(0001) electrodes by exposure to iodine vapor in UHV and polarizing in a 0.1 M HClO4/0.005 M KI solution, respectively. A saturation coverage of I on a Ru(poly) electrode passivates the Ru surface against significant hydroxide, chemisorbed oxygen or oxide formation during exposure to water vapor over an electrochemical cell in a UHV-electrochemistry transfer system. Immersion of I-Ru(poly) results in greater hydroxide and chemisorbed oxygen formation than water vapor exposure, but an inhibition of surface oxide formation relative that of the unmodified Ru(poly) surface is still observed. Studies with combined electrochemical and XPS techniques show that the iodine surface adlayer remained on top of the surface after cycles of overpotential electrodeposition/dissolution of copper on both Ru(poly) and Ru(0001) electrodes. These results indicate the potential bifunctionality of iodine layer to both passivate the Ru surface in the microelectronic processing and to act as a surfactant for copper electrodeposition. The electrodeposition of Cu on Ru(0001) or polycrystalline Ru was studied using XPS with combined ultrahigh vacuum/electrochemistry methodology (UHV-EC) in 0.1 M HClO4 with Cu(ClO4)2 concentrations ranging from 0.005 M to 0.0005 M, and on polycrystalline Ru in a 0.05M H2SO4/0.005 M CuSO4/0.001 …

Glutathione syntethase (GS) is an enzyme that belongs to the ATP-grasp superfamily and catalyzes the second step in the biosynthesis of glutathione. GS has been purified and sequenced from a variety of biological sources; still, its exact mechanism is not fully understood. Four highly conserved residues were identified in the binding site of human GS. Additionally, the G-loop residues that close the active site during catalysis were found to be conserved. Since these residues are important for catalysis, their function was studied computationally by site-directed mutagenesis. Starting from the reported crystal structure of human GS, different conformations for the wild type and mutants were obtained using molecular dynamics technique. The key interactions between residues and ligands were detected and found to be essential for enzyme activity.