None

In the transient diffraction NLYF proposal we set forward a program of work to investigate the response of crystals to shock compression in regions of strain rates previously unexplored, in a coordinated experimental, computational, and analytical program. Time resolved x-ray diffraction was used to directly determine the lattice parameters of crystals during shock loading previously on the Nova and Trident laser facilities. Under this proposal we extended this work to exploit the multi-beam direct drive capability of the Omega laser facility to allow more extensive diagnostic access for measuring the lattice parameters both parallel and perpendicular to the shock front. Under the NLUF Program in FY 99, we transitioned the dynamic diffraction experiments to the OMEGA facility. We developed a direct drive target configuration that uses a single beam to direct irradiate the surface of a thin crystal and 4 beams to irradiate a separate metal backlighter foil. Experiments were done with single crystal Si to demonstrate that the target design worked and that simultaneous measurements of compression both parallel and perpendicular to the shock propagation direction could be performed. We obtained simultaneous measurements of the (400) and (040) lattice planes during the period when a shock traveled through the …

The National Museum of the Pacific War presents an oral interview with Bill Brown. Brown was studying at the University of Texas at El Paso whe nhe joined the Army Air Force in 1942. Brown discusses his flight training, which occurred throughout Texas. With training cmplete, Brown was sent to Hawaii where he continued training with the 45th Fighter Squadron, 7th Air Force. Soon his unit was shipped to Iwo Jima where they flew bomber escort for bombing missions over the home islands of Japan. Brown was shot down over Yokahama and bailed out over the Tokyo Bay, where he was resuced by the USS Pipefish (SS-388). Brown was taken to Hawaii to recover and was eventually shipped back to the US, where he was discharged in September, 1945.

The National Museum of the Pacific War presents an oral interview with Bill Brown. Brown was studying at the University of Texas at El Paso whe nhe joined the Army Air Force in 1942. Brown discusses his flight training, which occurred throughout Texas. With training cmplete, Brown was sent to Hawaii where he continued training with the 45th Fighter Squadron, 7th Air Force. Soon his unit was shipped to Iwo Jima where they flew bomber escort for bombing missions over the home islands of Japan. Brown was shot down over Yokahama and bailed out over the Tokyo Bay, where he was resuced by the USS Pipefish (SS-388). Brown was taken to Hawaii to recover and was eventually shipped back to the US, where he was discharged in September, 1945.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

The Gamma-Ray multi-group analysis code MGA developed at Lawrence Livermore National Laboratory has been widely used in the area of gamma-ray non-destructive plutonium assay. This plutonium isotopic analysis code de-convolutes the complicated, 100-keV x-ray and gamma-ray region to obtain the ratio of Pu isotopes. Calibration of the detector efficiency is not required, but is determined intrinsically from the measured spectra. The code can either analyze low-energy gamma-ray spectrum taken using a high-resolution HPGe detector for energies below 300 keV, or analyze the low-energy spectrum combined with a high-energy spectrum (up to 1 MeV) in the two-detector analysis mode. In the latter case, the use of two detectors has been mandated by the conflicting requirements: excellent resolution at low energies (characteristic of small planar detectors) with good high-energy efficiency (characteristic of coaxial detectors). Usually, a high-energy spectrum taken using a coaxial Ge detector will not provide sufficient energy resolution for 100-keV plutonium isotopic analysis, while the small planar used at low energies has inadequate high-energy efficiency. An optimized-geometry ORTEC HPGe detector has been developed which combines good energy resolution at 100 keV combined with acceptable high-energy ({approx} 1 MeV) efficiency in a single detector. It has been used to gather spectra …

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

None

None

A imaging detector has been developed for the purpose of providing a non-destructive, real time method of determining tritium concentrations on the surface of internal TFTR vacuum vessel components. The detector employs a green phosphor screen (P31, zinc sulfide: copper) with a wave length peak of 530 nm, a charge-coupled device (CCD) camera linked to a computer, and a detection chamber for inserting components recovered from the vacuum vessel. This detector is capable of determining tritium concentrations on the surfaces. The detector provides a method of imaging tritium deposition on the surfaces in a fairly rapid fashion.

The Assembly Transfer System (ATS) receives, cools, and opens rail and truck transportation casks from the Carrier/Cask Handling System (CCHS). The system unloads transportation casks consisting of bare Spent Nuclear Fuel (SNF) assemblies, single element canisters, and Dual Purpose Canisters (DPCs). For casks containing DPCs, the system opens the DPCs and unloads the SNF. The system stages the assemblies, transfer assemblies to and from fuel-blending inventory pools, loads them into Disposal Containers (DCs), temporarily seals and inerts the DC, decontaminates the DC and transfers it to the Disposal Container Handling System. The system also prepares empty casks and DPCs for off-site shipment. Two identical Assembly Transfer System lines are provided in the Waste Handling Building (WHB). Each line operates independently to handle the waste transfer throughput and to support maintenance operations. Each system line primarily consists of wet and dry handling areas. The wet handling area includes a cask transport system, cask and DPC preparation system, and a wet assembly handling system. The basket transport system forms the transition between the wet and dry handling areas. The dry handling area includes the dry assembly handling system, assembly drying system, DC preparation system, and DC transport system. Both the wet and …

B-roll video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

None

News release about a new "Park & Ride" bus facility in Rowlett.

Rapid Solidification Process (RSP) Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The ability of the sprayed deposit to capture features of the tool pattern eliminates costly machining operations in conventional mold making and reduces turnaround time. Moreover, rapid solidification suppresses carbide precipitation and growth, allowing many ferritic tool steels to be artificially aged, an alternative to conventional heat treatment that offers unique benefits. Material properties and microstructure transformation during heat treatment of spray-formed H13 tool steel are described.

The eRHIC BNL summer meeting was held at BNL from June 26 to July 14, 2000. The meeting was very informal with only two talks a day and with ample time for discussions and collaborations. Several of the theory talks focused on the issue of saturation of parton distributions at small x--whether screening effects have already been seen at HERA, the relation of saturation to shadowing, and on the various signatures of a proposed novel state of matter--the Colored Glass Condensate--that may be observed at eRHIC. A related topic that was addressed was that of quantifying twist four effects, and on the relevance of these for studies of energy loss. Other issues addressed were coherence effects in vector meson production, anti-quark distributions in nuclei, and the relevance of saturation for heavy ion collisions. There were, also, talks on the Pomeron--the relevance of instantons and the non-perturbative gluon condensate to constructing a Pomeron. On the spin physics side, there were talks on predictions for inclusive distributions at small x. There were also talks on Skewed Parton Distributions and Deeply Virtual Compton Scattering. Though most of the talks were theory talks, there were also several important experimental contributions. A preliminary detector design …

This report compares the tax and election laws relating to political organizations and political committees in an attempt to highlight the differences between them, and discusses some of the proposals in the 106th Congress to require additional reporting by organizations engaging in political activities. This report does not address the taxation of other tax-exempt organizations making political expenditures taxable under IRC § 527. The report will be updated as new proposals are reported.

The Fuel Retrieval System (FRS) Process Validation Procedure (Stegen 2000) requires that a specified quantity of fuel processed through the Primary Cleaning Machine (PCM) be inspected for cleanliness during initial operational and process validation testing. Specifically these inspections are performed to confirm that the PCM adequately cleans the fuel elements of canister sludge. The results of these inspections will be used to demonstrate that residual quantities of canister particulate on fuel elements loaded into Multi-Canister Overpacks (MCOs) are within projected levels used to establish safety basis limits (Sloughter 2000). The fuel inspections performed as part of the validation process will be conducted during the Hot Operations portion of the Phased Startup Initiative (PSI) of the Fuel Retrieval and Integrated Water Treatment Systems (Pajunen 2000). Hot Operations testing constitutes Phases 3 and 4 of PSI. The fuel assemblies in all candidate canisters will be thoroughly inspected during these test phases (highly degraded fuel assemblies that qualify as scrap are exempt from inspection). During subsequent production operation of the FRS, only periodic inspections for cleanliness will be performed and documented. This document describes the specific processes and techniques that will be applied in performing the cleanliness inspections, and the methodology used to …

None

Daily newspaper from Sapulpa, Oklahoma that includes local, state, and national news along with advertising.

Weekly newspaper from Alvin, Texas that includes local, state, and national news along with advertising.

The authors are developing a laser radar to meet the needs of NASA for a 5-lb, 150 in{sup 3} image sensor with a pixel range accuracy of 0.1-inch. NASA applications include structural dynamics measurements, navigation guidance in rendezvous and proximity operations, and space vehicle inspection. The sensor is based on the scannerless range imager architecture developed at Sandia. This architecture modulates laser floodlight illumination and a focal plane receiver to phase encode the laser time of flight (TOF) for each pixel. They believe this approach has significant advantages over architectures directly measuring TOF including high data rate, reduced detector bandwidth, and conventional FPA detection. A limitation of the phase detection technique is its periodic nature, which provides relative range information over a finite ambiguity interval. To extend the operating interval while maintaining a given range resolution, a LADAR sensor using dual modulation frequencies has been developed. This sensor also extends the relative range information to absolute range by calibrating a gating function on the receiver to the TOF. The modulation frequency values can be scaled to meet the resolution and range interval requirements of different applications. Results from the miniature NASA sensor illustrate the advantages of the dual-frequency operation and …