None

The combined local structure techniques, extended x-ray absorption fine structure (EXAFS) and neutron pair distribution function analysis, have been used for temperatures 4<= T<= 330 K to rule out a large Jahn-Teller (JT) distortion of the Co-O bond in La1?xSrxCoO3 for a significant fraction of Co sites (x<= 0.35), indicating few, if any, JT-active, singly occupied eg Co sites exist.

In the western United States, exotic brook trout Salvelinus fontinalis frequently have a deleterious effect on native salmonids, and biologists often attempt to remove brook trout from streams by means of electrofishing. Although the success of such projects typically is low, few studies have assessed the underlying mechanisms of failure, especially in terms of compensatory responses. A multiagency watershed advisory group (WAG) conducted a 3-year removal project to reduce brook trout and enhance native salmonids in 7.8 km of a southwestern Idaho stream. We evaluated the costs and success of their project in suppressing brook trout and looked for brook trout compensatory responses, such as decreased natural mortality, increased growth, increased fecundity at length, and earlier maturation. The total number of brook trout removed was 1,401 in 1998, 1,241 in 1999, and 890 in 2000; removal constituted an estimated 88% of the total number of brook trout in the stream in 1999 and 79% in 2000. Although abundance of age-1 and older brook trout declined slightly during and after the removals, abundance of age-0 brook trout increased 789% in the entire stream 2 years after the removals ceased. Total annual survival rate for age-2 and older brook trout did not …

A Dalitz plot analysis of {approx} 13, 000 D{sub s}{sup +} decays to {pi}{sup +}{pi}{sup +}{pi}{sup -} has been performed. A 384 fb{sup -1} data sample, recorded by the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} storage ring running at center of mass energies near 10.6 GeV, is used. Amplitudes and phases of the intermediate resonances which contribute to this final state are measured. A high precision measurement of the ratio: {Beta}(D{sub s}{sup +} {yields} {pi}{sup +}{pi}{sup +}{pi}{sup -})/{Beta}(D{sub s}{sup +} {yields} K{sup +}K{sup -}{pi}{sup +}) = 0.199 {+-} 0.004 {+-} 0.006 is performed. Using a model independent partial wave analysis the amplitude and phase of the S-wave have been measured.

The effect of multiple and delayed jet impact and penetration on the borehole diameter in concrete targets is discussed in this paper. A first-order principle of shaped-charge jet penetration is that target hole volume is proportional to the energy deposited in the target by the jet. This principle is the basis for the relation that target borehole diameter at any depth along the penetration path is proportional to the jet energy deposited in the target at that location. Our current research shows that the 'jet energy per unit hole volume constant' for concrete can be substantially altered by the use of multiple and delayed jet impacts. It has been shown that enhanced entrance crater formation results from the simultaneous impact and penetration of three shaped-charge jets. We now demonstrate that enhanced borehole diameter is also observed by the simultaneous impact and penetration of multiple shaped-charge jets followed by the delayed impact and penetration of a single shaped-charge jet.

Many pivotal aspects of material science, biomechanics, and chemistry would benefit from nanometer imaging with ultrafast time resolution. Here we demonstrate the feasibility of short-pulse electron imaging with t10 nanometer/10 picosecond spatio-temporal resolution, sufficient to characterize phenomena that propagate at the speed of sound in materials (1-10 kilometer/second) without smearing. We outline resolution-degrading effects that occur at high current density followed by strategies to mitigate these effects. Finally, we present a model electron imaging system that achieves 10 nanometer/10 picosecond spatio-temporal resolution.

The transient expansion of plutonium-gallium alloys observed both in the lattice parameter as well as in the dimension of a sample held at ambient temperature is explained by assuming incipient precipitation of Pu{sub 3}Ga. However, this ordered {zeta}{prime}-phase is also subject to radiation-induced disordering. As a result, the gallium-stabilized {delta}-phase, being metastable at ambient temperature, is both driven towards thermodynamic equilibrium by radiation-enhanced diffusion of gallium and at the same time pushed back to its metastable state by radiation-induced disordering. A steady state is reached in which only a modest fraction of the gallium present is tied up in the {zeta}{prime}-phase.

Thermophotovoltaic (TPV) diodes fabricated from InGaAsSb alloys lattice-matched to GaSb substrates are grown by Metal Organic Vapor Phase Epitaxy (MOVPE). 0.53eV InGaAsSb TPV diodes utilizing front-surface spectral control filters have been tested in a vacuum cavity and a TPV thermal-to-electric conversion efficiency ({eta}{sub TPV}) and a power density (PD) of {eta}{sub TPV} = 19% and PD=0.58 W/cm{sup 2} were measured for T{sub radiator} = 950 C and T{sub diode} = 27 C. Recombination coefficients deduced from minority carrier measurements and the theory reviewed in this article predict a practical limit to the maximum achievable conversion efficiency and power density for 0.53eV InGaAsSb TPV. The limits for the above operating temperatures are projected to be {eta}{sub TPV} = 26% and PD = 0.75 W/cm{sup 2}. These limits are extended to {eta}{sub TPV} = 30% and PD = 0.85W/cm{sup 2} if the diode active region is bounded by a reflective back surface to enable photon recycling and a two-pass optical path length. The internal quantum efficiency of the InGaAsSb TPV diode is close to the theoretically predicted limits, with the exception of short wavelength absorption in GaSb contact layers. Experiments show that the open circuit voltage of the 0.53eV InGaAsSb TPV diodes …

In this paper the authors describe the approach to research, develop, and evaluate prototype middleware tools and architectures. The developed tools can be used by scientists to compose astronomical data analysis pipelines easily. They use the SuperMacho data pipelines as example applications to test the framework. they describe their experience from scheduling and running these analysis pipelines on massive parallel processing machines. they use MCR a Linux cluster machine with 1152 nodes and Luster parallel file system as the hardware test-bed to test and enhance the scalability of the tools.

The authors report on the recent heavy-quark results from CDF in Run IIa. They focus on a selection of mature analyses that demonstrate the capabilities of the experiment to extract interesting physics from the data. A few of the results presented have already been submitted for publication and papers are being prepared for most of the others.

Grain boundary network engineering is an emerging field that encompasses the concept that modifications to conventional thermomechanical processing can result in improved properties through the disruption of the random grain boundary network. Various researchers have reported a correlation between the grain boundary character distribution (defined as the fractions of special and random grain boundaries) and dramatic improvements in properties such as corrosion and stress corrosion cracking, creep, etc. While much early work in the field emphasized property improvements, the opportunity now exists to elucidate the underlying materials science of grain boundary network engineering. Recent investigations at LLNL have coupled automated electron backscatter diffraction (EBSD) with transmission electron microscopy (TEM) and atomic force microscopy (AFM) to elucidate these fundamental mechanisms. This investigation provides evidence that grain boundary network engineering and the formation of annealing twins disrupt the connectivity of the random grain boundary network and is likely responsible for the experimentally observed improvement in properties. This work illustrates that coupling of automated EBSD with other microstructural probes such as TEM and AFM provides data of greater value than any single technique in isolation. The coupled techniques have been applied to aid in understanding the underlying mechanisms of grain boundary network engineering …

An article written by Elizabeth Becker for the New York Times about the acknowledgement of the Republican Unity Coalition and inclusion of gay and lesbian people in ceremonies. The piece also speaks about the opinions of the new president George W. Bush and vice president Dick Cheney.

The potential radiological consequences to humans resulting from aqueous releases at the Savannah River Site (SRS) have usually been assessed using the computer code LADTAP or deterministic variations of this code. The advancement of LADTAP over the years included LADTAP II (a computer program that still resides on the mainframe at SRS) [1], LADTAP XL{copyright} (Microsoft Excel{reg_sign} Spreadsheet) [2], and other versions specific to SRS areas such as [3]. The spreadsheet variations of LADTAP contain two worksheets: LADTAP and IRRIDOSE. The LADTAP worksheet estimates dose for environmental pathways including ingestion of water and fish and external exposure resulting from recreational activities. IRRIDOSE estimates potential dose to individuals from irrigation of food crops with contaminated water. A new version of this deterministic methodology, LADTAP-PROB, was developed at Savannah River National Laboratory (SRNL) to (1) consider the complete range of the model parameter values (not just maximum or mean values), (2) determine the influences of parameter uncertainties within the LADTAP methodology, to perform a sensitivity analysis of all model parameters (to identify the input parameters to which model results are most sensitive), and (3) probabilistically assess radiological consequences from contaminated water. This study presents the methodology applied in LADTAP-PROB.

BNL plans to create a very long base line super neutrino beam facility by upgrading the AGS from the current 0.14 MW to 1.0 MW and beyond. The proposed facility consists of three major components. First is a 1.5 GeV superconducting linac to replace the booster as injector for the AGS, second is the performance upgrade of the AGS itself for higher intensity and repetition rate, and finally is the target and horn system for the neutrino production. The major contribution for the higher power is from the increase of the repetition rate of the AGS from 0.3 Hz to 2.5 Hz, with moderate increase from the intensity. The accelerator design considerations to achieve high intensity and low losses for the new linac and the AGS will be presented. The target and horn design for high power operation and easy maintenance will also be covered.

We review recent research that assesses evidence for the detection of anthropogenic and natural external influences on the climate. Externally driven climate change has been detected by a number of investigators in independent data covering many parts of the climate system, including surface temperature on global and large regional scales, ocean-heat content, atmospheric circulation, and variables of the free atmosphere, such as atmospheric temperature and tropopause height. The influence of external forcing is also clearly discernible in reconstructions of hemispheric scale temperature of the last millennium. These observed climate changes are very unlikely to be due only to natural internal climate variability, and they are consistent with the responses to anthropogenic and natural external forcing of the climate system that are simulated with climate models. The evidence indicates that natural drivers such as solar variability and volcanic activity are at most partially responsible for the large-scale temperature changes observed over the past century, and that a large fraction of the warming over the last 50 years can be attributed to greenhouse gas increases. Thus the recent research supports and strengthens the IPCC Third Assessment Report conclusion that ''most of the global warming over the past 50 years is likely due …

The 1.5 Tesla superconducting solenoid is part of the BABAR Detector located in the PEP-II B-Factory machine at the Stanford Linear Accelerator Center. The solenoid has a 2.8 m bore and is 3.7 m long. The two layer solenoid is wound with an aluminum stabilized conductor which is graded axially to produce a {+-} 3% field uniformity in the tracking region. The 24 month fabrication, 3 month installation and 1 month commissioning of the solenoid were completed on time and budget. This paper summarizes the culmination of a 3 year design, fabrication and testing program of the BABAR superconducting solenoid. The work was completed by an international collaboration between Ansaldo, INFN, LLNL, and SLAC. Critical current measurements of the superconducting strand, cable and conductor, cool-down, operation with the thermo-siphon cooling, fast and slow discharges, and magnetic forces are discussed in detail.

The cost/performance ratio of networks of workstations has been constantly improving. This trend is expected to continue in the near future. The aggregate peak rate of such systems often matches or exceeds the peak rate offered by the fastest parallel computers. This has motivated research towards using a network of computers, interconnected via a fast network (cluster system) or a simple Local Area Network (LAN) (distributed system), for high performance concurrent computations. Some of the important research issues arise such as (1) Optimal problem partitioning and virtual interconnection topology mapping; (2) Optimal execution scheduling and load balancing. CFD codes have been efficiently implemented on homogeneous parallel systems in the past. In particular, the helicopter aerodynamics CFD code TURNS has been implemented with MPI on the IBM SP with parallel relaxation and Krylov iterative methods used in place of more traditional recursive algorithms to enhance performance. In this implementation the space domain is divided into equal subdomain which are mapped to the processors. We consider the implementation of TURNS on a LAN of heterogeneous workstations. In order to deal with the problem of load balancing due to the different processor speeds we propose a suboptimal algorithm of dividing the space domain …

Understanding the phase stability of Alloy 22 (N06022) is important since the precipitation of tetrahedrally close-packed (TCP) phases over time has been known to adversely affect corrosion and mechanical properties. Prior observations have shown that these phases precipitate during the welding process. After welding, residual stresses due to the solidification and cooling from temperature remain. When the weld cannot be stress-relieved by solution annealing, the application of commercially available stress-mitigation processes such as low plasticity burnishing (LPB) and laser shock peening (LSP) may be used to produce near-surface compressive stresses. This study involved examination of cross-sectional samples of aged 1.25 inch thick welds of Alloy 22 plates using electron backscatter diffraction (EBSD) for TCP identification and micrograph analysis for TCP quantification. Precipitation in both the as-welded and LSP weld was observed primarily in inter-dendritic regions whilst precipitation in the LPB weld was in both inter- and intra-dendritic regions.

Phase stability and aging mechanisms in a water-quenched (WQ) U-6wt% Nb (U-14at% Nb) alloy artificially aged at 200 C and naturally aged at ambient temperature for 15 years have been investigated and studied using Vickers-hardness measurement, X-ray diffraction (XRD) analysis, and transmission electron microscopy (TEM) techniques. Age hardening/softening phenomenon is recorded from the artificially aged samples based upon the microhardness measurement. The age hardening can be readily rationalized by the occurrence of fine-scaled Nb segregation, or spinodal decomposition, within the {alpha}'' domains, which results in the formation of a modulated structure containing nano-scaled Nb-rich and Nb-lean domains. Prolonged aging leads to age softening of the alloy by coarsening of the modulated structure. Chemical ordering, or disorder-order phase transformation, is found within the naturally aged alloy according to TEM observations of antiphase domain boundaries (APBs) and superlattice diffraction patterns. A possible superlattice structure for the ordered {alpha}'' phase observed in the naturally aged sample and underlying low-temperature aging mechanisms are proposed.

A system for maintaining a sample at a constant temperature below 10K after deactivating the cooling source is demonstrated. In this system, the cooling source is a GM cryocooler that is joined with the sample through an adaptor that consists of a helium pot and a resistive medium. Upon deactivating the cryocooler, the power applied to a heater located on the sample side of the resistive medium is decreased gradually to maintain an appropriate temperature rise across the resistive medium as the helium pot warms. The temperature is held constant in this manner without the use of solid or liquid cryogens and without mechanically disconnecting the sample from the cooler. Shutting off the cryocooler significantly reduces sample motion that results from vibration and expansion/contraction of the cold head housing. The reduction in motion permits certain processes that are very sensitive to sample position stability, but are not performed throughout the duration that the sample is at low-temperature. An apparatus was constructed to demonstrate this technique using a 4K GM cryocooler. Experimental and theoretical predictions indicate that when the helium pot is pressurized to the working pressure of the cryocooler's helium supply, a sample with continuous heat dissipation of several-hundred milliwatts …

The BABAR Detector, located in the PEP-II B-Factory at the Stanford Linear Accelerator Center, includes a large 1.5 Tesla superconducting solenoid, 2.8 m bore and length 3.7 m. The two layer solenoid is wound with an aluminum stabilized conductor which is graded axially to produce a {+-} 3% field uniformity in the tracking region. This paper summarizes the 3 year design, fabrication and testing program of the superconducting solenoid. The work was carried out by an international collaboration between INFN, LLNL and SLAC. The coil was constructed by Ansaldo Energia. Critical current measurements of the superconducting strand, cable and conductor, cool-down, operation with the thermo-siphon cooling, fast and slow discharges, and magnetic forces are discussed in detail.

Previous modeling for HIF drivers concentrated on designs in which 100 or more beams are grouped in an array and accelerated through a common set of induction cores. The total beam energy required by the target is achieved by the combination of final ion energy, current per beam and number of beams. Economic scaling favors a large number of small ({approx}1 cm dia.) beams. An alternative architecture has now been investigated, which we refer to as a modular driver. In this case, the driver is subdivided into many (>10) independent accelerators with one or many beams each. A key objective of the modular driver approach is to be able to demonstrate all aspects of the driver (source-to-target) by building a single, lower cost module compared to a full-scale, multi-beam driver. We consider and compare several design options for the modular driver including single-beam designs with solenoid instead of quadrupole magnets in order to transport the required current per module in a single beam, solenoid/quad combinations, and multi-beam, all-quad designs. The drivers are designed to meet the requirements of the hybrid target, which can accommodate a larger spot size than the distributed radiator target that was used for the Robust Point …

None

There is need for an improved test of human ability to assimilate dietary vitamin B{sub 12}. Assaying and understanding absorption and uptake of B{sub 12} is important because defects can lead to hematological and neurological complications. Accelerator mass spectrometry (AMS) is uniquely suited for assessing absorption and kinetics of {sup 14}C-labeled substances after oral ingestion because it is more sensitive than decay counting and can measure levels of carbon-14 ({sup 14}C) in microliter volumes of biological samples, with negligible exposure of subjects to radioactivity. The test we describe employs amounts of B{sub 12} in the range of normal dietary intake. The B{sub 12} used was quantitatively labeled with {sup 14}C at one particular atom of the DMB moiety by exploiting idiosyncrasies of Salmonellametabolism. In order to grow aerobically on ethanolamine, S. entericamust be provided with either pre-formed B{sub 12} or two of its precursors: cobinamide and dimethylbenzimidazole (DMB). When provided with {sup 14}C-DMB specifically labeled in the C2 position, cells produced {sup 14}C-B{sub 12} of high specific activity (2.1 GBq/mmol, 58 mCi/mmol) and no detectable dilution of label from endogenous DMB synthesis. In a human kinetic study, a physiological dose (1.5 mg, 2.2 KBq/59 nCi) of purified {sup 14}C-B{sub 12} …