The radioactive startup of two new SRS processing facilities, the Actinide Removal Process (ARP) and the Modular Caustic-Side-Solvent-Extraction Unit (MCU) will add two new waste streams to the Defense Waste Processing Facility (DWPF). The ARP will remove actinides from the 5.6 M salt solution resulting in a sludge-like product that is roughly half monosodium titanate (MST) insoluble solids and half sludge insoluble solids. The ARP product will be added to the Sludge Receipt and Adjustment Tank (SRAT) at boiling and dewatered prior to pulling a SRAT receipt sample. The cesium rich MCU stream will be added to the SRAT at boiling after both formic and nitric acid have been added and the SRAT contents concentrated to the appropriate endpoint. A concern was raised by an external hydrogen review panel that the actinide loaded MST could act as a catalyst for hydrogen generation (Mar 15, 2007 report, Recommendation 9). Hydrogen generation, and it's potential to form a flammable mixture in the off-gas, under SRAT and Slurry Mix Evaporator (SME) processing conditions has been a concern since the discovery that noble metals catalyze the decomposition of formic acid. Radiolysis of water also generates hydrogen, but the radiolysis rate is orders of magnitude …

The 100-F-43 waste site is the portion of the former discharge spillway for the PNL Outfall formerly existing above the ordinary high water mark of the Columbia River. The spillway consisted of a concrete flume used to discharge waste effluents from the 100-F Experimental Animal Farm. The results of verification sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.

None

In this research and development project, LLNL will leverage the process for fabrication of the membranes developed by our internally funded effort (LLNL Laboratory Directed Research and Development). LLNL will then employ chemical manipulations to modify charge at the ends of the nanotubes and make the membranes more selective to either positive or negative ions through a combination of size and charge selectivity. LLNL's goal is to demonstrate ion exclusion while preserving high permeabilities and low energy use. Success of this research and development project may warrant further developments in the fabrication of membranes.

This project is the first application of a completely different approach to climate modeling, in which new prognostic equations are used to directly compute the evolution of two-point correlations. This project addresses three questions that are critical for the credibility of the science base for climate prediction: (1) What is the variability spectrum at equilibrium? (2) What is the rate of relaxation when subjected to external perturbations? (3) Can variations due to natural processes be distinguished from those due to transient external forces? The technical approach starts with the evolution equation for the probability distribution function and arrives at a prognostic equation for ensemble-mean two-point correlations, bypassing the detailed weather calculation. This work will expand our basic understanding of the theoretical limits of climate prediction and stimulate new experiments to perform with conventional climate models. It will furnish statistical estimates that are inaccessible with conventional climate simulations and likely will raise important new questions about the very nature of climate change and about how (and whether) climate change can be predicted. Solid progress on such issues is vital to the credibility of the science base for climate change research and will provide policymakers evaluating tradeoffs among energy technology options and …

Working at Lawrence Livermore National Laboratory (LLNL) this summer has provided a very unique and special experience for me. I feel that the research opportunities given to me have allowed me to significantly benefit my research group, the laboratory, the Department of Homeland Security, and the Department of Energy. The researchers in the Single Particle Aerosol Mass Spectrometry (SPAMS) group were very welcoming and clearly wanted me to get the most out of my time in Livermore. I feel that my research partner, Veena Venkatachalam of MIT, and I have been extremely productive in meeting our research goals throughout this summer, and have learned much about working in research at a national laboratory such as Lawrence Livermore. I have learned much about the technical aspects of research while working at LLNL, however I have also gained important experience and insight into how research groups at national laboratories function. I believe that this internship has given me valuable knowledge and experience which will certainly help my transition to graduate study and a career in engineering. My work with Veena Venkatachalam in the SPAMS group this summer has focused on two major projects. Initially, we were tasked with an analysis of data …

The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of illness and injury surveillance activities that provide an early warning system to detect health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence, occupational injuries and illnesses, and disabilities and deaths among current workers.

Laboratory radioactive sources were used to characterize the phoswich detector. The CaF{sub 2} scintillator has a low light-yield and slow decay time, thus produces very small signals due to low-energy gamma rays or X-rays. Therefore, detection of 30 keV X-rays (from the xenon radioisotopes) using this layer and discriminating its very small signals from electronic noise was a challenging task. Several solutions were considered and experimentally evaluated. We found that the best solution would be extending the fast triangular filter from 10 taps to 30 taps. This will extend the peaking time of this filter from 25 nsec to 75 nsec. The digital filter is implemented in FPGA on our DPP2.0 and is used to trigger the detection system. Functionality of the new filter in capturing and discriminating 30 keV X-rays was confirmed by using a {sup 133}Ba gamma-ray source. Development of the DPP GUI software has continued with the addition of two new panels to display histograms of beta/gamma and beta/x-ray coincidence events. This includes coincidence events from a single channel, as well as two-channel, coincidence event. A pileup rejection algorithm has been implemented in the FPGA code, and controls to adjust its sensitivity have been added to the …

Due to their excellent corrosion resistance, iron aluminum alloys are currently being considered for use as weld claddings in fossil fuel fired power plants. The susceptibility to hydrogen cracking of these alloys at higher aluminum concentrations has highlighted the need for research into the effect of chromium additions on the corrosion resistance of lower aluminum alloys. In the present work, three iron aluminum alloys were exposed to simulated coal combustion environments at 500 C and 700 C for both short (100 hours) and long (5,000 hours) isothermal durations. Scanning electron microscopy was used to analyze the corrosion products. All alloys exhibited excellent corrosion resistance in the short term tests. For longer exposures, increasing the aluminum concentration was beneficial to the corrosion resistance. The addition of chromium to the binary iron aluminum alloy prevented the formation iron sulfide and resulted in lower corrosion kinetics. A classification of the corrosion products that developed on these alloys is presented. Scanning transmission electron microscopy (STEM) of the as-corroded coupons revealed that chromium was able to form chromium sulfides only on the higher aluminum alloy, thereby preventing the formation of deleterious iron sulfides. When the aluminum concentration was too low to permit selective oxidation of …

To assist in the characterization of microstructural changes associated with irradiation damage in low alloy steels, the technique of quantitative x-ray mapping using a field emission gun scanning transmission electron microscope (FEG-STEM) equipped with an x-ray energy Dispersive spectrometer (XEDS) has been employed. Quantitative XEDS microanalyses of the matrix and grain boundaries of irradiated specimens have been compared with previous quantitative analyses obtained using 3D-Atom Probe Field-Ion Microscopy (3D-APFIM). In addition, the FEG-STEM XEDS maps obtained from the irradiated steel have revealed the presence of 2 to 3 nm Ni-enriched 'precipitates' in the matrix, which had previously been detected using 3D-APFIM. These quantitative FEG-STEM XEDS results represent the first direct and independent microchemical corroboration of the 3D-APFIM results showing ultra-fine irradiation-induced hardening features in low alloy steel.

A linear CKM relation, {bar {eta}} = tan {Phi}{sub 3/2}({bar p} - 0.24 {+-} 0.03), involving a 1{sigma} range for {Phi}{sub 3/2}, 20{sup o} < {Phi}{sub 3/2} < 115{sup o}, is obtained from B{sup 0} {yields} K*{pi} amplitudes measured recently in Dalitz plot analyses of B{sup 0} {yields} K{sup +}{pi}{sup -}{pi}{sup 0} and B{sup 0}(t) {yields} K{sub S}{pi}{sup +}{pi}{sup -}. This relation is consistent within the large error on {Phi}{sub 3/2} with other CKM constraints which are unaffected by new b {yields} s{bar q}q operators. Sensitivity of the method to a new physics contribution in the {Delta}S = {Delta}I = 1 amplitude is discussed.

The purpose of this Cooperative Research and Development Agreement (CRADA) was to explore and develop advanced manufacturing techniques to fabricate sintered iron-aluminide intermetallic porous bodies used for gas filtration so as to reduce production costs while maintaining or improving performance in advanced coal gasification and combustion systems. The use of a power turbine fired with coal-derived synthesis gas requires some form of gas cleaning in order to protect turbine and downstream components from degradation by erosion, corrosion, and/or deposition. Hot-gas filtration is one form of cleaning that offers the ability to remove particles from the gases produced by gasification processes without having to substantially cool and, possibly, reheat them before their introduction into the turbine. This technology depends critically on materials durability and reliability, which have been the subject of study for a number of years.

This research program was designed to enhance our understanding of the behavior of fluids and fluid mixtures containing chain-like molecules. The original objective was to explain and predict the experimentally observed thermophysical properties, including phase equilibria and dynamics, of systems containing long flexible molecules ranging in length from alkanes to polymers. Over the years the objectives were expanded to include the treatment of molecules that were not chain-like. Molecular dynamics and Monte Carlo computer simulations were used to investigate how variations in molecular size, shape and architecture influence the types of phase equilibria, thermodynamic properties, structure and surface interactions that are observed experimentally. The molecular insights and theories resulting from this program could eventually serve as the foundation upon which to build correlations of the properties of fluids that are both directly and indirectly related to the Nation’s energy resources including: petroleum, natural gas, and polymer solutions, melts, blends, and materials.

This month's issue has the following articles: (1) The Edward Teller Centennial--Commentary by George H. Miller; (2) Edward Teller's Century: Celebrating the Man and His Vision--Colleagues at the Laboratory remember Edward Teller, cofounder of Lawrence Livermore, adviser to U.S. presidents, and physicist extraordinaire, on the 100th anniversary of his birth; (3) Quark Theory and Today's Supercomputers: It's a Match--Thanks to the power of BlueGene/L, Livermore has become an epicenter for theoretical advances in particle physics; and (4) The Role of Dentin in Tooth Fracture--Studies on tooth dentin show that its mechanical properties degrade with age.

This report summarizes 4 years of research achievements in this Office of Science (BER), U.S. Department of Energy (DOE) project. The research described was conducted by scientists and supporting staff at Lovelace Respiratory Research Institute (LRRI)/Lovelace Biomedical and Environmental Research Institute (LBERI) and the Southern Urals Biophysics Institute (SUBI). All project objectives and goals were achieved. A major focus was on obtaining improved cancer risk estimates for exposure via inhalation to plutonium (Pu) isotopes in the workplace (DOE radiation workers) and environment (public exposures to Pu-contaminated soil). A major finding was that low doses and dose rates of gamma rays can significantly suppress cancer induction by alpha radiation from inhaled Pu isotopes. The suppression relates to stimulation of the body's natural defenses, including immunity against cancer cells and selective apoptosis which removes precancerous and other aberrant cells.

This report can be divided into two parts: the first part, which is composed of sections 1, 2, and 3, is devoted to report the analyses of fission gas bubbles; the second part, which is in section 4, is allocated to describe the mechanistic model development. Swelling data of irradiated U-Mo alloy typically show that the kinetics of fission gas bubbles is composed of two different rates: lower initially and higher later. The transition corresponds to a burnup of {approx}0 at% U-235 (LEU) or a fission density of {approx}3 x 10{sup 21} fissions/cm{sup 3}. Scanning electron microscopy (SEM) shows that gas bubbles appear only on the grain boundaries in the pretransition regime. At intermediate burnup where the transition begins, gas bubbles are observed to spread into the intragranular regions. At high burnup, they are uniformly distributed throughout fuel. In highly irradiated U-Mo alloy fuel large-scale gas bubbles form on some fuel particle peripheries. In some cases, these bubbles appear to be interconnected and occupy the interface region between fuel and the aluminum matrix for dispersion fuel, and fuel and cladding for monolithic fuel, respectively. This is a potential performance limit for U-Mo alloy fuel. Microscopic characterization of the evolution of …

This White Paper summarizes the outcome of the Town Meeting on Phases of QCD that took place January 12-14, 2007 at Rutgers University, as part of the NSAC 2007 Long Range Planning process. The meeting was held in conjunction with the Town Meeting on Hadron Structure, including a full day of joint plenary sessions of the two meetings. Appendix A.1 contains the meeting agenda. This Executive Summary presents the prioritized recommendations that were determined at the meeting. Subsequent chapters present the essential background to the recommendations. While this White Paper is not a scholarly article and contains few references, it is intended to provide the non-expert reader

As a gateway for scientific discovery, the Argonne Leadership Computing Facility (ALCF) works hand in hand with the world's best computational scientists to advance research in a diverse span of scientific domains, ranging from chemistry, applied mathematics, and materials science to engineering physics and life sciences. Sponsored by the U.S. Department of Energy's (DOE) Office of Science, researchers are using the IBM Blue Gene/L supercomputer at the ALCF to study and explore key scientific problems that underlie important challenges facing our society. For instance, a research team at the University of California-San Diego/ SDSC is studying the molecular basis of Parkinson's disease. The researchers plan to use the knowledge they gain to discover new drugs to treat the disease and to identify risk factors for other diseases that are equally prevalent. Likewise, scientists from Pratt & Whitney are using the Blue Gene to understand the complex processes within aircraft engines. Expanding our understanding of jet engine combustors is the secret to improved fuel efficiency and reduced emissions. Lessons learned from the scientific simulations of jet engine combustors have already led Pratt & Whitney to newer designs with unprecedented reductions in emissions, noise, and cost of ownership. ALCF staff members provide …

The initiative will enable the COG Biopathology Center (Biospecimen Repository), the Molecular Genetics Laboratory and other participating reference laboratories to upload large data sets to the eRDES. The capability streamlines data currency and accuracy allowing the centers to export data from local systems and import the defined data to the eRDES. The process will aid in the best practices which have been defined by the Office of Biorepository and Biospecimen Research (OBBR) and the Group Banking Committee (GBC). The initiative allows for batch import and export, a data validation process and reporting mechanism, and a model for other labs to incorporate. All objectives are complete. The solutions provided and the defined process eliminates dual data entry resulting in data consistency. The audit trail capabilities allow for complete tracking of the data exchange between laboratories and the Statistical Data Center (SDC). The impact is directly on time and efforts. In return, the process will save money and improve the data utilized by the COG. Ongoing efforts include implementing new technologies to further enhance the current solutions and process currently in place. Web Services and Reporting Services are technologies that have become industry standards and will allow for further harmonization with caBIG …

NanoDynamics Inc. has undertaken a study to develop and demonstrate an anode-supported solid oxide fuel cell capable of generating a minimum of 20 W per cell on hydrogen. The cell technology will also be assed for operation on renewable hydrocarbon-based fuels such as biomass gas, as well its applicability for larger-scale power production. The project was divided into five sub-tasks, the first of which was the development and refinement of the cell manufacturing processes of gel-casting and paste extrusion for the fabrication of planar and tubular anode supports. These methods exhibited high production yields with excellent reproducibility. Using a conventional YSZ-based cell as a performance benchmark, new materials-sets and cell configurations were developed. Three prototype configurations were implemented, the best generating an average of 10 W per cell, and exhibiting excellent potential for further development and scale-up. Using a variety of techniques such as modifying the materials-set, microstructure, and cell configuration, cells with an average power output of 22.7 W were demonstrated, 13.5% in excess of the 20 W project goal. Thermal cycling was performed on such cells, and it was found that over a regime of 150 cycles (approximately 300 h), the cell power increased by 1.8%. So-called “short-stacks” …

This document summarizes findings from a literature review into the incremental costs associated with low-energy buildings. The goal of this work is to help establish as firm an analytical foundation as possible for the Building Technology Program's cost-effective net-zero energy goal in the year 2025.

Laboratory management requires that the controls specified in this Facility Safety Plan (FSP) be applied to efficiently and safely perform operations within these facilities. Any operation conducted in these facilities that involves activities not commonly performed by the public, requires an Integrated Work Sheet to determine the appropriate level of safety documentation.

The purpose of this report is to summarize and evaluate the Argonne Distance Tabletop Exercise (DISTEX) method. DISTEX is intended to facilitate multi-organization, multi-objective tabletop emergency response exercises that permit players to participate from their own facility's incident command center. This report is based on experience during its first use during the FluNami 2007 exercise, which took place from September 19-October 17, 2007. FluNami 2007 exercised the response of local public health officials and hospitals to a hypothetical pandemic flu outbreak. The underlying purpose of the DISTEX method is to make tabletop exercising more effective and more convenient for playing organizations. It combines elements of traditional tabletop exercising, such as scenario discussions and scenario injects, with distance learning technologies. This distance-learning approach also allows playing organizations to include a broader range of staff in the exercise. An average of 81.25 persons participated in each weekly webcast session from all playing organizations combined. The DISTEX method required development of several components. The exercise objectives were based on the U.S. Department of Homeland Security's Target Capabilities List. The ten playing organizations included four public health departments and six hospitals in the Chicago area. An extent-of-play agreement identified the objectives applicable to each …

The 1607-F5 waste site is a former septic tank, tile field, and associated pipeline located within the 100-FR-1 Operable Unit that received sewage from the former 181-F Pumphouse. Lead, gamma-chlordane, and heptachlor epoxide were identified within or around the septic system at concentrations exceeding the direct exposure cleanup criteria. Multiple metal and pesticide constituents were also identified as exceeding the groundwater and river protection cleanup criteria. The results of verification sampling demonstrated that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also showed that residual contaminant concentrations are protective of groundwater and the Columbia River.