Single crystals of magnesium-aluminate spinel MgAl{sub 2}O{sub 4} were irradiated with 340 keV Xe{sup 2} ions at {minus}173 C ({approximately} 100 K). A fluence of 1 x 10{sup 20} Xe/m{sup 2} created an amorphous layer at the surface of the samples. The samples were annealed for 1 h at different temperatures ranging from 130 C to 880 C. Recrystallization took place in the temperature interval between 610 C and 855 C. Transmission electron microscopy (TEM) images show two distinct layers near the surface: (1) a polycrystalline layer with columnar grain structure; and (2) a buried damaged layer epitaxial with the substrate. After annealing at 1100 C for 52 days, the profile of implanted Xe ions did not change, which means that Xe ions are not mobile in the spinel structure up to 1100 C. The thickness of the buried damaged layer decreased significantly in the 1100 C annealed sample comparing to the sample annealed for 1 h at 855 C.

The author's laboratory continues to use NMR to investigate the structure and dynamics in amorphous materials, including the local structure of ultraphosphate glasses. Changes in the alkali environment in these phosphate glasses as a function of modifier concentration has recently been probed using {sup 6}Li and {sup 23}Na solid state NMR. Molecular dynamic (MD) simulations have also been performed in an attempt to gain additional insight into the variations of the local structure. Interestingly, although there are distinct variations in the Li coordination number as well as the Li-O bond lengths in the MD simulations (with a minimum or maximum in these parameters near the 20% Li{sub 2}O concentration), a linear change in the {sup 6}Li NMR chemical shift is observed between 5 and 50% Li{sub 2}O mole fraction. One would expect that such variations should be observable in the NMR chemical shift. In an attempt to understand this behavior the author has performed empirical calculation of the {sup 6}Li NMR chemical shift directly from the structures obtained in the MD simulations. It has been argued that the NMR chemical shift of alkali species can be related to a chemical shift parameter A, where A is defined as the summation …

Microhole technology development is based on the premise that with advances in electronics and sensors, large conventional-diameter wells are no longer necessary for obtaining subsurface information. Furthermore, microholes offer an environment for improved substance measurement. The combination of deep microholes having diameters of 1-3/8 in. at their terminal depth and 7/8-in. diameter logging tools will comprise a very low cost alternative to currently available technology for deep subsurface characterization and monitoring.

None

We consider halo formation in continuous beams oscillating at natural modes by inspecting particle trajectories. Trajectory equations containing field nonlinearities are derived from a weighted polynomial expansion. We then use perturbational techniques to further analyze particle motion.

None

None

The radiation transport and linearized thermal energy equations have been analyzed to find the temporal dependence of the component modes in a radiation/thermal front. The fully resolved spectral variation of the opacity as a function of energy, as well as the exact time and angular dependence, is treated in this work. As we are able to study arbitrarily complicated opacity spectra, we stress the importance of the new results as a check on the effect of using opacity averages.

None

The transient exact solution of heat conduction in a two-domain composite cylinder is developed using the separation of variables technique. The inner cylinder is isotropic and the outer cylindrical layer is orthotropic. Temperature solutions are obtained for boundary conditions of the first and second kinds at the outer surface of the orthotropic layer. These solutions are applied to heat flow calorimeters modeling assuming that there is heat generation due to nuclear reactions in the inner cylinder. Heat flow calorimeter simulations are carried out assuming that the inner cylinder is filled with plutonium oxide powder. The first objective in these simulations is to predict the onset of thermal equilibrium of the calorimeter with its environment. Two types of boundary conditions at the outer surface of the orthotropic layer are used to predict thermal equilibrium. The procedure developed to carry out these simulations can be used as a guideline for the design of calorimeters. Another important application of these solutions is on the estimation of thermophysical properties of orthotropic cylinders. The thermal conductivities in the vertical, radial and circumferential directions of the orthotropic outer layer can be estimated using this exact solution and experimental data. Simultaneous estimation of the volumetric heat capacity …

Often the most robust and efficient algorithms for the solution of large-scale problems involving nonlinear PDEs and optimization require the computation of derivative quantities. We examine the use of automatic differentiation (AD) to provide code for computing first and second derivatives in conjunction with two parallel numerical toolkits, the Portable, Extensible Toolkit for Scientific Computing (PETSc) and the Toolkit for Advanced Optimization (TAO). We discuss how the use of mathematical abstractions for vectors and matrices in these libraries facilitates the use of AD to automatically generate derivative codes and present performance data demonstrating the suitability of this approach.

None

The DIRC (acronym for Detection of Internally Reflected Cherenkov (light)) is a new type of Cherenkov ring imaging detector based on total internal reflection that is used for the first time in the BaBar detector at PEP-II ring of SLAC. The Cherenkov radiators are long rectangular bars made of synthetic fused silica. The photon detector is a water tank equipped with an array of 10,752 conventional photomultipliers. The first year operational experience in the BaBar detector is presented using cosmic data and collision data in the energy region of the Y(4s) resonance.

Model independent radiative correction to the recoil proton polarization for the elastic electron-proton scattering is calculated within method of electron structure functions. The explicit expressions for the recoil proton polarization are represented as a contraction of the electron structure and the hard part of the polarization dependent contribution into cross-section. The calculation of the hard part with first order radiative correction is performed. The obtained representation includes the leading radiative corrections in all orders of perturbation theory and the main part of the second order next-to-leading ones. Numerical calculations illustrate our analytical results.

The authors demonstrate that the free neutron structure function can be extracted in deep-inelastic scattering from A=3 mirror nuclei, with nuclear effects canceling to within 2% for x {approx_lt} 0.85.

Typical designs for a Heavy Ion Fusion Power Plant require the source injector to deliver 100 beams, packed into an array with a spacing of 7 cm. When designing source injectors using a single large aperture source for each beam, the emitter surfaces are packed into an array with a spacing of 30 cm. Thus, the matching section of the source injector must not only prepare the beam for transport in a FODO lattice, but also funnel the beams together. This can be accomplished by an ESQ matching section in which each beam travels on average at a slight angle to the axis of the quadrupoles and uses the focusing effect of the FODO lattice to maintain the angle. At the end of the matching section, doublet steering is used to bring the beams parallel to each other for injection into the main accelerator. A specific solution of this type for an 84-beam source injector is presented.

The Heavy Ion Fusion Group at Lawrence Livermore National Laboratory has for several years been developing the world's first circular induction accelerator designed for space charge dominated ion beams. Experiments on one quarter of the ring have been completed. The accelerator extended ten half-lattice periods (HLP) with induction cores for acceleration placed on every other HLP. A network of Capacitive Beam Probes (C-probes) was also enabled for beam position monitoring throughout the bend section. These C-probes have been instrumental in steering experiment, implementation of the acceleration stages and the dipole pulser, and the first attempts at coordinated bending and acceleration. Data from these experiments and emittance measurements will be presented.

The authors examine CuPt-B atomic sublattice ordering in Ga{sub 0.51}In{sub 0.49}P (GaInP) and Ga{sub 0.47}In{sub 0.53}As (GaInAs) III-V alloy films grown by atmospheric- and low-pressure metalorganic chemical vapor deposition on singular and vicinal (001) substrates. The influences of growth conditions and substrate miscut on double- and single-variant ordered microstructures are investigated using transmission electron microscopy (TEM). Relatively thick (>1-2 {micro}m) double-variant ordered GaInP and GaInAs films show complementary superdomain formation. Single-variant ordered films on <111>B-miscut substrates contain single-phase domains, separated by antiphase boundaries (APBs). The appearance of APBs in TEM dark-field images is anticipated from electron diffraction theory.

The performance of CdS/CdTe solar cells is strongly impacted by the process used to grow the CdS layer. CdS films grown by chemical-bath deposition (CBD) exhibit lower sublimation (CSS).

None

The desire to move high-energy Pulsed Power systems from the laboratory to practical field systems requires the development of compact lightweight drivers. This paper concerns an effort to develop such a system based on a plastic laminate strip Blumlein as the final pulseshaping stage for a 600 kV, 50ns, 5-ohm driver. A lifetime and breakdown study conducted with small-area samples identified Kapton sheet impregnated with Propylene Carbonate as the best material combination of those evaluated. The program has successfully demonstrated techniques for folding large area systems into compact geometry's and vacuum impregnating the laminate in the folded systems. The major operational challenges encountered revolve around edge grading and low inductance, low impedance switching. The design iterations and lessons learned are discussed. A multistage prototype testing program has demonstrated 600kV operation on a short 6ns line. Full-scale prototypes are currently undergoing development and testing.

The residual stress, resistance, orientation, and microstructure of sputtered Mo films were studied as a function of varied-deposition power and pressure.

None

None