An extensive experimental program to measure the spin structure of the nucleus is underway in Hall B at Jefferson Lab using a polarized electron beam incident on a polarized target. Spin degrees of freedom offer the possibility to test, in an independent way, existing models of resonance electro-production. The present analysis selects the Delta{sup +} (1232) in the exclusive channel {rvec p}({rvec e}, e'p)pi{sup 0} from data of the EG1 run period, taken in the Fall of 1998, to extract single and double asymmetries in a Q{sup 2} range from 0.5 to 1.5 GeV{sup 2}/c{sup 2}. Results of the asymmetries are presented as a function of momentum transfer Q{sup 2}. A comparison with the Effective Lagrangian Model by R. Davidson and N. Mukhopadhyay, the unitary isobar model MAID, and the dynamic model by Sato and Lee was performed. The data were found to be generally in good agreement with the models and a x{sup 2} comparison preferred the Sato-Lee model, which is tailored for the Delta (1232) photo- and electro-production. The present results are the first measurement of asymmetries for the exclusive reaction {rvec p}({rvec e}, e'p)pi{sup 0} and will provide new constraints for the models.

This thesis illustrates a complete study of the doubly and singly Cabibbo suppressed decays D{sup +} and D{sub s}{sup +} {yields} K{sup +} {pi}{sup -}{pi}{sup +}. Data for this analysis have been collected by the fixed-target high-energy photoproduction experiment FOCUS at Fermilab. The authors have selected the D{sup +} and D{sub s}{sup +} samples with cuts to obtain a sufficiently high statistics, a good signal to noise ratio and, at the same time, eliminate possible contaminations from the more copious and favored decays. The D{sup +} yield consists of 189 {+-} 24 events, with a signal to noise ratio {approx} 1; the D{sub s}{sup +} yield is 567 {+-} 31 and the signal to noise ratio is {approx} 2.5. The authors have measured {Lambda}(D{sup +} {yields} K{sup +}{pi}{sup -}{pi}{sup +})/{Lambda}(D{sup +} {yields} K{sup -}{pi}{sup +}{pi}{sup +}) = 0.0065 {+-} 0.0008 {+-} 0.004 and {Lambda}(D{sub s}{sup +} {yields} K{sup +}{pi}{sup -}{pi}{sup +})/{Lambda}(D{sub s}{sup +} {yields} K{sup +}K{sup -}{pi}{sup +}) = 0.127 {+-} 0.007 {+-} 0.014, improving the previous determinations of a factor of 2 and 5, respectively. The author has also performed a Dalitz plot analysis for both decays. The amplitude analysis for D{sub s}{sup +} {yields} K{sup +}{pi}{sup -}{pi}{sup +} …

The Standard Model of field and particles is the theory that provides the best description of the known phenomenology of the particle physics up to now. Data collected in the last years, mainly by the experiments at the big particle accelerators (SPS, LEP, TEVATRON, HERA, SLAC), allowed to test the agreement between measurements and theoretical calculations with a precision of 10{sup -3} {divided_by} 10{sup -4}. The Standard Model is a Quantum Field Theory based on the gauge symmetry group SU(3){sub C} x SU(2){sub L} x U(1){sub Y} , with spontaneous symmetry breaking. This gauge group includes the color symmetry group of the strong interaction, SU(3){sub C}, and the symmetry group of the electroweak interactions, SU(2){sub L} x U(1){sub Y}. The formulation of the Standard Model as a gauge theory guarantees its renormalizability, but forbids explicit mass terms for fermions and gauge bosons. The masses of the particles are generated in a gauge-invariant way by the Higgs Mechanism via a spontaneous breaking of the electroweak symmetry. This mechanism also implies the presence of a massive scalar particle in the mass spectrum of the theory, the Higgs boson. This particle is the only one, among the basic elements for the minimal formulation …

The authors study on the rare decay K{sub L} {yields} {pi}{sup 0}{gamma}{gamma}, measure a{sub V}, and branching ratio by analyzing 96, 97 and 99 data. The measurements were taken by KTeV at Fermi National Accelerator Laboratory. After all cuts, they have 1982 K{sub L} {yields} {pi}{sup 0}{gamma}{gamma} candidate. The background level is estimated as 30%. K{sub L} {yields} {pi}{sup 0}{gamma}{gamma} branching ratio is measured as (1.29 {+-} 0.03(stat) {+-} 0.04(sys)) x 10{sup -6}. By using D'Ambrosio's theory to fit a{sub V}, a{sub V} = -(-0.31 {+-} 0.05(stat) {+-} 0.07(sys)).

We report on a search for Standard Model (SM) production of Higgs to WW* in the two charged lepton (e, {mu}) and two neutrino final state in p{bar p} collisions at a center of mass energy {radical}s = 1.96 TeV. The data were collected with the CDF II detector at the Fermilab Tevatron and correspond to an integrated luminosity of 1.9fb{sup -1}. The Matrix Element method is developed to calculate the event probability and to construct a likelihood ratio discriminator. There are 522 candidates observed with an expectation of 513 {+-} 41 background events and 7.8 {+-} 0.6 signal events for Higgs mass 160GeV/c{sup 2} at next-to-next-to-leading logarithmic level calculation. The observed 95% C.L. upper limit is 0.8 pb which is 2.0 times the SM prediction while the median expected limit is 3.1{sub -0.9}{sup +1.3} with systematics included. Results for 9 other Higgs mass hypotheses ranging from 110GeV/c{sup 2} to 200GeV/c{sup 2} are also presented. The same dilepton plus large transverse energy imbalance (E{sub T}) final state is used in the SM ZZ production search and the WW production study. The observed significance of ZZ {yields} ll{nu}{nu} channel is 1.2{sigma}. It adds extra significance to the ZZ {yields} 4l channel …

W{gamma} production is analyzed in the electron and muon decay channels with approximately 1 fb{sup -1} of data from p{bar p} collisions that were produced at a center-of-mass energy of {radical}s = 1.96 TeV and that were collected by the D0 detector at the Fermilab Tevatron collider. The inclusive p{bar p} {yields} {ell}{nu}{gamma} cross section is measured in both channels and is found to be consistent with the Standard Model expectation of 2.08 {+-} 0.05{sub PDF} pb for events with a photon E{sub T} > 11 GeV, {Delta}R{sub {ell}{sub {gamma}}} > 0.7, and {ell}{nu}{gamma} transverse mass greater than 90 GeV . The observed cross section is measured to be 2.05 {+-} 0.18{sub stat} {+-} 0.10{sub sys} {+-} 0.13{sub lumi} pb and a.72 {+-} 0.19{sub stat} {+-} 0.15{sub sys} {+-} 0.10{sub lumi} pb for the electron and muon channels respectively. The photon E{sub T} spectrum is examined for indications of anomalous WW{gamma} couplings. No evidence is found, and the following one-dimensional limits are set at a 95% confidence level: -0.18 < {lambda} < 0.18 and 0.16 < {kappa} < 1.84. The observed charge-signed photon-lepton rapidity difference is consistent with the Standard Model prediction and is indicative of the theoretically expected radiation …

The study of the top quark pair production mechanism in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV is described. The main subjects are the measurements of the top quark pair production cross section, the top quark mass and a search for a new particle decaying to the top quark pair. The analyses are based on 1.9 fb{sup -1} of data collected by the Collider Detector at Fermilab (CDF) Run II experiment between March 2002 and May 2007, using the lepton+jets events. The measured top quark pair production cross section is 8.2 {+-} 0.5 (stat.) {+-} 0.8 (syst.) {+-} 0.5 (lum.) pb, which is slightly higher than the standard model prediction at the top mass of 175 GeV/c{sup 2}. The top quark mass is an important parameter in the standard model, and also in the experimental studies. The measured top quark mass if 171.6 {+-} 2.0 (stat.) {+-} 1.3(syst.) GeV/c{sup 2}. Finally, they report on a search for a new gauge boson decaying to t{bar t}, which interferes with the standard model gluon in the q{bar q} {yields} t{bar t} production process. They call such a hypothetical particle a 'Massive Gluon'. The observed t{bar t} invariant mass distribution is …

MINOS (Main Injector Neutrino Oscillation Search), is a long baseline neutrino experiment designed to search for neutrino oscillations using two detectors at Fermi National Accelerator Laboratory, IL (Near Detector) and Soudan, MN (Far Detector). It will study {nu}{sub {mu}} {yields} {nu}{sub {tau}} oscillations and make a measurement on the oscillation parameters, {Delta}m{sub 23}{sup 2} and sin{sup 2} 2{theta}{sub 23}, via a {nu}{sub {mu}} beam made at Fermilab. Charge current neutrino interactions in the MINOS detectors are of three types: quasi-elastic scattering (QEL), resonance scattering (RES) and deep inelastic scattering (DIS). Of these, quasi-elastic scattering leaves the cleanest signal with just one {mu} and one proton in the final state, thus rendering the reconstruction of the neutrino energy more accurate. This thesis will outline a method to separate QEL events from the others in the two detectors and perform a calculation of {Delta}m{sub 23}{sup 2} and sin{sup 2} 2{theta}{sub 23} using those events. The period under consideration was May 2005 to February 2006. The number of observed quasi-elastic events with energies below 10 GeV was 29, where the expected number was 60 {+-} 3. A fit to the energy distribution of these events gives {Delta}m{sub 23}{sup 2} = 2.91{sub -0.53}{sup +0.49}(stat){sub …

The production of jets in association with a Z/{gamma}* boson is an example of an important class of processes at hadron colliders, namely vector boson + jet (V + jet) production. Comparisons of measurements of this class of processes with theory predictions constitute an important, fundamental test of the Standard Model of particle physics, and of the theory of QCD in particular. While having a smaller cross section than other V +jet processes, Z/{gamma}*({yields} e{sup +}e{sup -}) + jets production, with Z/{gamma}* {yields} e{sup +}e{sup -}/{mu}{sup +}{mu}{sup -}, has a distinct experimental signature allowing for measurements characterized by low backgrounds and a direct, precise measurement of the properties of the decay products of the Z/{gamma}* boson. In this thesis, several new measurements of the properties of jets produced in association with a Z/{gamma}* boson in p{bar p} collisions at {radical}s = 1.96 TeV are presented. The cross section for Z/{gamma}*({yields} e{sup +}e{sup -}) + N jet production (N {le} 3) is measured, differential in the transverse momentum of the Nth jet in the event, normalized to the inclusive Z/{gamma}* cross section. Also, the cross section for Z/{gamma}*({yields} e{sup +}e{sup -}) + N jets (N {ge} 1) is measured, differential in …

None

None

A surface mode is an electromagnetic field distribution bounded at a surface. It decays exponentially with the distance from the surface on both sides of the surface and propagates at the surface. The surface mode exists at a metal-dielectric interface as surface plasmon (1) or at a photonic crystal surface terminated properly (34; 35; 36). Besides its prominent near-filed properties, it can connect structures at its propagation surface and results in far-field effects. Extraordinary transmission (EOT) and beaming are two examples and they are the subjects I am studying in this thesis. EOT means the transmission through holes in an opaque screen can be much larger than the geometrical optics limitation. Based on our everyday experience about shadows, the transmission equals the filling ratio of the holes in geometrical optics. The conventional diffraction theory also proved that the transmission through a subwavelength circular hole in an infinitely thin perfect electric conductor (PEC) film converges to zero when the hole's dimension is much smaller than the wavelength (40). Recently it is discovered that the transmission can be much larger than the the filling ratio of the holes at some special wavelengths (41). This cannot be explained by conventional theories, so it …

The surface structures of NaCl(100), LiF(100) and alpha-MgCl2(0001) adsorbed on various metal single crystals have been determined by low energy electron diffraction (LEED). Thin films of these salts were grown on metal substrates by exposing the heated metal surface to a molecular flux of salt emitted from a Knudsen cell. This method of investigating thin films of insulators (ionic salts) on a conducting substrate (metal) circumvents surface charging problems that plagued bulk studies, thereby allowing the use of electron-based techniques to characterize the surface.

The behavior of nanocrystals under extreme pressure was investigated using synchrotron x-ray diffraction. A major part of this investigation was the testing of a prototype synchrotron endstation on a bend magnet beamline at the Advanced Light Source for high pressure work using a diamond anvil cell. The experiments conducted and documented here helped to determine issues of efficiency and accuracy that had to be resolved before the construction of a dedicated ''super-bend'' beamline and endstation. The major conclusions were the need for a cryo-cooled monochromator and a fully remote-controllable pressurization system which would decrease the time to change pressure and greatly reduce the error created by the re-placement of the diamond anvil cell after each pressure change. Two very different types of nanocrystal systems were studied, colloidal iron oxide (Fe{sub 2}O{sub 3}) and thin film TiN/BN. Iron oxide nanocrystals were found to have a transition from the {gamma} to the {alpha} structure at a pressure strongly dependent on the size of the nanocrystals, ranging from 26 GPa for 7.2 nm nanocrystals to 37 GPa for 3.6 nm nanocrystals. All nanocrystals were found to remain in the {alpha} structure even after release of pressure. The transition pressure was also found, for …

Nitric acid has been shown to be a weak acid in acetonitrile. It is conceivable that a nitrate salt of a weakly Lewis acidic cation could furnish a ''naked'' nitrate anion as a basic catalyst in a variety of reactions in non-aqueous solvents. Such a nitrate salt could also be bound to a polymeric support via the cation, thereby allowing for reclamation and recycling of the nitrate ion. This subject is dealt with in Chapter 2, wherein my contributions consisted of performing all the reactions with the polymer supported catalyst and carrying out the experiments necessary to shed light on the reaction mechanisms. Chapter 3 contains a description of the structure and catalytic properties of an azidoproazaphosphatrane. This compound is an air-stable versatile catalyst that has proven useful not only homogeneously, but also when bound to a solid support. The synthesis of a polymer bound proazaphosphatrane containing a trivalent phosphorus is presented in Chapter 4. Such a compound has been sought after by our group for a number of years. Not only does the synthesis I have accomplished for it allow for easier separation of proazaphosphatrane catalysts from reaction mixtures, but recycling of the base is made much simpler. Proazaphosphatranes …

The dissertation begins with Chapter 1, which is a general introduction of the fundamental synthesis of mesoporous silica materials, the selective functionlization of mesoporous silica materials, and the synthesis of nanostructured porous materials via nanocasting. In Chapter 2, the thermo-responsive polymer coated mesoporous silica nanoparticles (MSN) was synthesized via surface-initated polymerization and exhibited unique partition activities in a biphasic solution with the thermally induced change. In Chapter 3, the monodispersed spherical MSN with different mesoporous structure (MCM-48) was developed and employed as a template for the synthesis of mesoporous carbon nanoparticles (MCN) via nanocasting. MCN was demonstrated for the delivery of membrane impermeable chemical agents inside the cells. The cellular uptake efficiency and biocompabtibility of MCN with human cervical cancer cells were also investigated. In addition to the biocompabtibility of MCN, MCN was demonstrated to support Rh-Mn nanoparticles for catalytic reaction in Chapter 4. Owing to the unique mesoporosity, Rh-Mn nanoparticles can be well distributed inside the mesoporous structure and exhibited interesting catalytic performance on CO hydrogenation. In Chapter 5, the synthesis route of the aforementioned MCM-48 MSN was discussed and investigated in details and other metal oxide nanoparticles were also developed via nanocasting by using MCM-48 MSN as a …

The MINOS experiment is a neutrino oscillation baseline experiment intending to use high resolution L/E neutrinos to measure the atmospheric neutrino oscillations parameters to unprecedented precision. Two detectors have been built to realize the measurements, a Near detector, located about 1km downstream from the beam target at the Fermi Laboratory, and a Far detector, located at 736km, at the Soudan Laboratory. The technique relies on the Near detector to measure the un-oscillated neutrino spectrum, while the Far detector measures the neutrino spectrum once oscillated. The comparison between the two measurements is expected to allow MINOS to measure {Delta}m{sup 2} beyond 10% precision level. The Near and Far detectors have been built similarly to minimize possible systematic effects. Both detectors have been endowed with different readout systems, as the beam event rates are very different. The MINOS calibration detector (CalDet), installed at CERN, was instrumented with both readout systems such that they can simultaneously measure and characterize the energy deposition (response and event topology) of incident known particle from test-beams. This thesis presents the investigations to quantify the impact of the performance of both readout systems on the MINOS results using the measurements obtained with CalDet. The relative comparison of the …

The authors have studied the W + {ge} n jets process in Tevatron Run II experiment. The data used correspond to a total integrated luminosity of 72 pb{sup -1} taken from March 2002 through January 2003. The lowest order QCD predictions have been tested with a new prescription of the parton-jet matching, which allows to construct the enhanced LO phase space. According to this procedure, one gets unique results which do not depend on unphysical bias of kinematical cuts to avoid the collinear/infrared divergence in calculation. Namely, one can get the meaningful results in the lowest order prediction. The controllable event samples of the W boson plus jets events by the enhanced lowest order prediction will lead smaller systematic uncertainty than the naive prediction without any cares of the collinear/infrared divergence. They expect their method will be also useful to make systematically small samples as the background estimates in the top quark analysis. They found a good agreement between data and theory in typical kinematics distributions. The number of events for each inclusive sample up to 3 jets are compared with Monte Carlo calculations. A comparison with Run I results is also presented. This is the first result for the …

In the field of computational fluid dynamics (CFD) accurate representations of fluid phenomena can be simulated but require large amounts of data to represent the flow domain. Most datasets generated from a CFD simulation can be coarse, {approx} 10,000 nodes or cells, or very fine with node counts on the order of 1,000,000. A typical dataset solution can also contain multiple solutions for each node, pertaining to various properties of the flow at a particular node. Scalar properties such as density, temperature, pressure, and velocity magnitude are properties that are typically calculated and stored in a dataset solution. Solutions are not limited to just scalar properties. Vector quantities, such as velocity, are also often calculated and stored for a CFD simulation. Accessing all of this data efficiently during runtime is a key problem for visualization in an interactive application. Understanding simulation solutions requires a post-processing tool to convert the data into something more meaningful. Ideally, the application would present an interactive visual representation of the numerical data for any dataset that was simulated while maintaining the accuracy of the calculated solution. Most CFD applications currently sacrifice interactivity for accuracy, yielding highly detailed flow descriptions but limiting interaction for investigating the …

The main purpose of this work is to investigate the glassy behavior of microemulsions and block copolymers. The origin of glassy behavior in microemulsions and block copolymers is frustration due to a competition between short-range interaction and long range interaction. According to the charge frustrated Ising model, the competition between ferromagnetic interaction and antiferromagnetic interaction is the origin of frustration in microemulsions. The competition between entropic effects and stoichiometric constraints responsible for the formation of micelles in microemulsions can lead to the emergence of a self generated glassy behavior in these systems. In the block copolymer, the competition between the repulsive short range interaction between monomers in polymer chains and the long range interaction by chemical bonds can lead to the emergence of a self generated glassy behavior. The criteria for the fluctuation induced first order transition and our microemulsion and block copolymer glasses are essentially the same. Both are a consequence of the large phase space of low energy excitations (14) (62) (all states with momenta q which fulfill |q| = q{sub m}) and are of at the most a moderate supercooling of the liquid state is required. This is strongly supported by the observation in Ref. (14) that …

The advance of High Energy Physics research using circulating accelerators strongly depends on increasing the magnetic bending field which accelerator magnets provide. To achieve high fields, the most powerful present-day accelerator magnets employ NbTi superconducting technology; however, with the start up of Large Hadron Collider (LHC) in 2007, NbTi magnets will have reached the maximum field allowed by the intrinsic properties of this superconductor. A further increase of the field strength necessarily requires a change in superconductor material; the best candidate is Nb{sub 3}Sn. Several laboratories in the US and Europe are currently working on developing Nb{sub 3}Sn accelerator magnets, and although these magnets have great potential, it is suspected that their performance may be fundamentally limited by conductor thermo-magnetic instabilities: an idea first proposed by the Fermilab High Field Magnet group early in 2003. This thesis presents a study of thermo-magnetic instability in high field Nb{sub 3}Sn accelerator magnets. In this chapter the following topics are described: the role of superconducting magnets in High Energy Physics; the main characteristics of superconductors for accelerator magnets; typical measurements of current capability in superconducting strands; the properties of Nb{sub 3}Sn; a description of the manufacturing process of Nb{sub 3}Sn strands; superconducting cables; …

Thermodynamics has been studied systematically for the high temperature cuprate superconductor La{sub 2-x}Sr{sub x}CuO{sub 4-{delta}}, La-214, in the entire superconductive region from strongly underdoped to strongly overdoped regimes. Magnetization studies with H{parallel}c have been made in order to investigate the changes in free energy of the system as the number of carriers is reduced. Above the superconducting transition temperature, the normal-state magnetization exhibits a two-dimensional Heisenberg antiferromagnetic behavior. Below T{sub c}, magnetization data are thermodynamically reversible over large portions of the H-T plane, so the free energy is well defined in these regions. As the Sr concentration is varied over the wide range from 0.060 (strongly underdoped) to 0.234 (strongly overdoped), the free energy change goes through a maximum at the optimum doped in a manner similar to the T{sub c0} vs. x curve. The density of states, N(0), remains nearly constant in the overdoped and optimum doped regimes, taking a broad maximum around x = 0.188, and then drops abruptly towards zero in the underdoped regime. The La{sub 2-x}Sr{sub x}CuO{sub 4} (La-214) system displays the fluctuating vortex behavior with the characteristic of either 2D or 3D fluctuations as indicated by clearly identifiable crossing points T* close to T{sub c}. …

Several classes of thermosetting polymer matrix composites were evaluated for use in structural repair applications. Initial work involved the characterization and evaluation of woven carbon fiber/epoxy matrix composites for structural pipeline repair. Cyanate ester resins were evaluated as a replacement for epoxy in composites for high-temperature pipe repair applications, and as the basis for adhesives for resin infusion repair of high-temperature composite materials. Carbon fiber/cyanate ester matrix composites and fumed silica/cyanate ester nanocomposites were evaluated for their thermal, mechanical, viscoelastic, and rheological properties as they relate to their structure, chemistry, and processing characteristics. The bisphenol E cyanate ester under investigation possesses a high glass transition temperature, excellent mechanical properties, and unique ambient temperature processability. The incorporate of fumed silica served to enhance the mechanical and rheological properties of the polymer and reduce thermal expansion without sacrificing glass transition or drastically altering curing kinetics. Characterization of the composites included dynamic mechanical analysis, thermomechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron microscopy.

We have measured the three-body photobreakup of {sup 3}He with the tagged photon beam and the CEBAF Large Acceptance Spectrometer in Hall B at the Thomas Jefferson National Accelerator Facility, in the photon energy range between 0.35 GeV and 1.55 GeV. This measurement constitutes a wide-ranging survey of two- and three-body processes in the gamma{sup 3}He {yields} ppn reaction channel, thanks to the high statistics and large kinematic coverage obtained with the CLAS. Total and partially integrated differential cross sections for the full ppn data set and for selected kinematics were extracted and are compared to theoretical predictions of Laget (up to 1.0 GeV). At low photon energies, the calculations are generally in fair agreement with the data. The comparison shows evidence of strong contributions of three-body absorption mechanisms, especially in the star kinematics, a symmetric configuration of the three final-state nucleons. Mostly the effects of two-body absorption mechanisms are se en, as expected, in the pp-pair-breakup kinematics, where the neutron does not participate in the reaction. The quasi-two-body breakup shows angular distributions consistent with preliminary gamma{sup 3}He --> pd results, extracted from our experiment. The ratio of cross sections for the star configuration and for the two-body kinematics, shows …