In this APS Instrumentation Initiative, 2.5-m-long and 5-m-long insertion-device x-ray sources will be built on 9 straight sections of the APS storage ring, and an additional 9 bending-magnet sources will also be put in use. The front ends for these 18 x-ray sources will be built to contain and safeguard access to these bright x-ray beams. In addition, funds will be provided to build state-of-the-art insertion-device beamlines to meet scientific and technological research demands well into the next century. This new initiative will also include four user laboratory modules and a special laboratory designed to meet the x-ray imaging research needs of the users. The Conceptual Design Report (CDR) for the APS Instrumentation Initiative describes the scope of all the above technical and conventional construction and provides a detailed cost and schedule for these activities. According to these plans, this new initiative begins in FY 1994 and ends in FY 1998. The document also describes the preconstruction R & D plans for the Instrumentation Initiative activities and provides the cost estimates for the required R & D.

"The program concerning Acoustic Emission/Flaw Relationships for Inservice Monitoring of LWRs was entitled in FY76 with the objective of validating the application of acoustic emission (AE) to monitor nuclear reactor pressure-containing components during operation to detect cracking."

A combination of optical microscopy, scanning electron microscopy with backscattered electron detection (SEM/BSE), and analytical electron microscopy (AEM) is being used to determine the nature of uranium in soils from the Fernald Environmental Management Project. The information gained from these studies is being used to develop and test remediation technologies. Investigations using SEM have shown that uranium is contained within particles that are typically 1 to 100 micrometers in diameter. Further analysis with AEM has shown that these uranium-rich regions are made up of discrete uranium-bearing phases. The distribution of these uranium phases was found to be inhomogeneous at the microscopic level.

Eighteen electronic drawings detailing hardware from the sensor through the two console racks for the acoustic emission instrument system.

Dataset documenting the software programs used in the acoustic emission (AE) instruments systems developed under the U. S. Nuclear Regulatory Commission (NRC) / Pacific Northwest Laboratory (PNL) AE program.

"The objectives of this report are as follows: (a) To present the design and details utilized on the precast concrete panel rehabilitation at Troy Lock. (b) To compare the results of precast concrete panel rehabilitation with previous cast-in-place repairs, with respect to quality, cost, and schedule. (c) To recommend refinements in the details and methods of fabrication and erection of the precast panels, based on lessons learned from work performed at Troy Lock." (p. 2).

The following report provides documents of estimates of provided annual reports concerning sea turtle morality takes in the Hawai'i-based longline fishery, between the years 1994 to 1996.

The following report is meant to evaluate whether the information on oocyte size improves ability to predict ovary weight from body weight, and we evaluate the cost-effectiveness of different sample sizes for characterizing egg size.

Abstract: The Hawaii pelagic surface fisheries and more recently the longline fisheries have grown dramatically. As a result, competition between fisheries on the fishing grounds and in the marketplace has also increased. Physical conflicts between vessels and claims of decreased fishing success by surface (troll and handline) fishermen led to the enactment of Federal regulations limiting the number of domestic longline vessels and the areas in which they can operate. The scientific evidence of biological or economic fishery interaction between longline and small-vessel fishermen is limited but suggests that intense longline fishing near the Hawaiian Islands has the potential to affect catch rates in other Hawaii fisheries. Better data collection and more research are needed to document fishery interaction and to improve fishery management.

The following document provides a framework for incorporation of health and information to enhance recovery of the Hawaiian monk seal.

This report is based on the findings from an observational study on the Hawaiian monk seal on Laysan Island in the Northwestern Hawaiian Islands during April 8 to July 20 1987 and March 30 to July 16 1989. The data collected focuses on haul-out, behavior, and reproductive patterns; population structure; and factors affecting survival.

The following report provides extensive information on the Kewalo Research Facility of Oahu Island. The Kewalo Research Facility sits on Kewalo Basin and is the center for ongoing research programs designed to examine the most important environmental parameters on the behavior and physiology of tunas. Along with tuna the Kewalo Research facility is also a primary location to stage research activities associated with the studies and preservation of the Hawaiian monk seals, it also provides an important laboratory where research on and resuscitation of several threatened and endangered species of sea turtles found in the Pacific Ocean can be carried out.

The interfacial area concentration is one of the most important parameters in a thermal-hydraulic analysis of two-phase flow systems based on the two-fluid model. A theoretical foundation of the measurement method for the time averaged local interfacial area using a double sensor probe is presented. Based on this theory, the double sensor resistivity probe was employed for the measurement of local properties of two-phase flow such as the interfacial velocity, local interfacial area concentration and void fraction in vertical air-water bubbly flow. Experimental data are presented on the radial profiles of the void fraction, bubble velocity, bubble chord length and interfacial area concentration at various gas flow rates. In addition to these, some statistical information on turbulent motions of bubbles are presented. Each of the double sensors are checked against the global void measurement using a differential pressure. The result is very satisfactory. Furthermore, the area averaged void fraction, and the interfacial area concentration obtained from the double sensor probe measurement compared very well with the photographic measurements. The results show that the double sensor probe method is accurate and reliable for the local measurements of interfacial area and void fraction in bubbly two-phase flow. Results of the measurement of …

Progress report of the Argonne National Laboratory's Nuclear Technology Programs, including R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research. This report describes technical progress of research and development efforts aimed at producing superconducting components based on the Y-Ba--Cu, Bi-Sr-Ca-Cu, Bi-Pb-Sr-Ca-Cu, and TI-Ba-Ca-Cu oxide systems including: synthesis and heat treatment of high-Ta superconductors, formation of monolithic and composite wires and tapes, superconductor/metal connectors, characterization of structures and superconducting and mechanical properties, and fabrication and properties of thin films.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research. This report describes technical progress of research and development efforts aimed at producing superconducting components based on the Y-Ba-Cu, BI-Sr-Ca-Cu, Bi-Pb-Sr-Ca-Cu, and TI-Ba-Ca-Cu oxide systems including: synthesis and heat treatment of high-Te superconductors, formation of monolithic and composite wires and tapes, superconductor/metal connectors, characterization of structures and superconducting and mechanical properties, and fabrication and properties of thin films.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research. This report describes the technical progress of research and development efforts aimed at producing superconducting components that are based on the Y-Ba-Cu, Bi-Sr-Ca-Cu, Bi-Pb-Sr-Ca-Cu, and (Tl,Pb)-(Ba,Sr)-Ca-Cu oxide systems including: synthesis and heat treatment of high-Ta superconductors, formation of monolithic and composite wires and tapes, superconductor/metal connectors, characterization of structures and superconducting and mechanical properties, fabrication and properties of thin films, and development of prototype components.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research. This report describes technical progress of research and development efforts aimed at producing superconducting components in the Y-Ba-Cu, (B1,Pb)-Sr-Ca-Cu, (Tl,Pb,BI)-(Ba,Sr)-Ca-Cu, and Hg-Ba-Ca-Cu-O oxide systems including: synthesis and heat treatment of high-Ta superconductors; formation of monolithic and composite wires, tapes, and coils; characterization of structures and superconducting and mechanical properties; fabrication and properties of films; and development of prototype components.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research. This report describes technical progress of research and development efforts aimed at producing superconducting components in the Y-Ba-Cu, (Bi,Pb)-Sr-Ca-Cu, (Tl,Pb,Bi)-(Ba,Sr)-Ca-Cu, and Hg-Ba-Ca-Cu-O oxide systems including: synthesis and heat treatment of high-Ta superconductors, formation of monolithic and composite conductors, characterization of structures and superconducting and mechanical properties, and fabrication and testing of prototype components.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research. This report describes the technical progress of research and development efforts aimed at producing superconducting components in the (Bi,Pb)-Sr-Ca-Cu, (T,Pb,Bi,V)- (Ba,Sr)-Ca-Cu, and Y-Ba-Cu oxide systems including: synthesis and heat treatment of high-Te superconductors, formation of monolithic and composite conductors, characterization of structures and superconducting and mechanical properties, and fabrication and testing of prototype components.

Fortran M is a small set of extensions to Fortran that supports a modular approach to the construction of sequential and parallel programs. Fortran M programs use channels to plug together processes which may be written in Fortran M or Fortran 77. Processes communicate by sending and receiving messages on channels. Channels and processes can be created dynamically, but programs remain deterministic unless specialized nondeterministic constructs are used. Fortran M programs can execute on a range of sequential, parallel, and networked computers. This report incorporates both a tutorial introduction to Fortran M and a users guide for the Fortran M compiler developed at Argonne National Laboratory. The Fortran M compiler, supporting software, and documentation are made available free of charge by Argonne National Laboratory, but are protected by a copyright which places certain restrictions on how they may be redistributed. See the software for details. The latest version of both the compiler and this manual can be obtained by anonymous ftp from Argonne National Laboratory in the directory pub/fortran-m at info.mcs.anl.gov.

To better understand the processes leading to the generation and release of gases from waste tanks, the authors studied the radiolytic and thermal generation of H2, N2O, N2, O2, and NH3 in nonradioactive waste simulant solutions and slurries. The radiolytic sources for H2 are e(sub aq)⁻ and its predecessors and H atoms. Radiolysis of the water generates some H2 and an additional amount comes from the hydrogen abstraction reaction H + RH(yields) H2+R(center_dot). Nitrate scavenges e(sub aq)(sup (minus) and its predecessors whereas nitrite is the major H-atom scavenger. Computer modeling shows that if [NO3⁻] is above 0.5 M, and [NO2⁻] is above 2M, the addition of other scavengers will have little effect on the yield of H2. In the presence of organic molecules O2 is efficiently destroyed. Small yields of ammonia were measured and the yields increase linearly with dose. The nitrogen in NH3 comes from organic chelators. The yields of gases in solution depend only weakly on temperature. The rate of thermal generation of gases increases upon preirradiation, reaches a maximum, and then declines. The known radiolytic degradation products of chelators, NTA, IDA, glycolate, glyoxylate, formaldehyde, formate, oxalate, and hydroxylainine were examined for their roles in the thermal generation …

Gamma irradiation of WHC-supplied samples of grouted Tank 102-AP simulated nonradioactive waste has been carried out at three dose rates, 0.25, 0.63, and 130 krad/hr. The low dose rate corresponds to that in the actual grout vaults; with the high dose rate, doses equivalent to more than 40 years in the grout vault were achieved. An average G(H2) = 0.047 molecules/100 eV was found, independent of dose rate. The rate of H2 production decreases above 80 Mrad. For other gases, G(N2) = 0.12, G(O2) = 0.026, G(N2O) = 0.011 and G(CO) = 0.0042 at 130 krad/hr were determined. At lower dose rates, N2 and O2 could not be measured because of interference by trapped air. The value of G(H2) is higher than expected, suggesting segregation of water from nitrate and nitrite salts in the grout. The total pressure generated by the radiolysis at 130 krad/h has been independently measured, and total amounts of gases generated were calculated from this measurement. Good agreement between this measurement and the sum of all the gases that were independently determined was obtained. Therefore, the individual gas measurements account for most of the major components that are generated by the radiolysis. At 90 C, H2, …

Monthly report from the Reactor Operations Division of the Brookhaven National Laboratory that covers various topics like the different operations conducted, and the amount of energy consumed.