Aerial image shows the result of an airborne radioactive survey over an area of 65 square miles in the vicinity of Miller Hill, Carbon County, Wyoming with the approximate location of eleven radioactivity anomalies found. Text describes methods used and discusses the anomalies.

The following report is the results of a workshop held to determine the cause of fibropapilloma (lobulated tumors), thereby ultimately leading to solutions and effective strategies for containment. The urgent need to solve this problem arises from the unanimous belief among the workshop participants that this disease will continue to affect populations of turtles locally and worldwide, adding further to their survival difficulties. The workshop was held in December of 1990 and the research behind the workshop results from about 10 years of observing the species.

The following document is a report on an observational study around the Hawaiian monk seal on Lisianski Island in Northwestern Hawaiian Islands between 16-18 of May to 29th of August and the 10th of June to the 11th of August 1990. The data collected is based around reproduction and factors affecting survival as well ashaul-out patterns and population structure.

This document describes field studies of the endangered Hawaiian monk seal in the Northwestern Hawaiian Islands in 1996. The studies provide information on the status and trends of monk seal populations, natural history traits (survival, reproduction, growth, behavior, and feeding habits), and the success of various activities designed to facilitate population growth.

From introduction: The program's objective is to acquire information through intensive monitoring of coastal projects in an effort to improve project purpose and attainment, design procedures, construction methods, and operation and maintenance techniques.

Partial abstract: Frequent dredging requirements and scouring at the foundation of Ocean City Inlet's south jetty resulted in a study to determine the source of the shoaling and scouring. The study concluded that sand was being transported northward along Assateague Island, through and over the south jetty, and deposited inside the inlet. The sand was then transported north by ebb currents where it encroached on the Federal navigation channel. A rehabilitation program was initiated to create a littoral barrier to eliminate the shoaling problem and to repair the scour hold. Three headland breakwaters were constructed to stabilize Northern Assateague Island. The site was selected as part of the Monitoring Completed Coastal Projects (MCCP) Program to determine how well the rehabilitation project accomplished its design purpose.

A combination of backscattered electron imaging and analytical electron microscopy (AEM) with electron diffraction have been used to determine the physical and chemical properties of uranium contamination in soils from the Fernald Environmental Management Project in Ohio. The information gained from these studies has been used in the development and testing of remediation technologies.

A program has been established for DOE Environmental Restoration and Waste Management (EM) to evaluate factors that are likely to affect waste glass reaction during repository disposal, with emphasis on an unsaturated environment typical of what may be expected for the proposed Yucca Mountain repository site.

OTTER (Organized Techniques for Theorem-proving and Effective Research) is a resolution-style theorem-proving program for first-order logic with equality. OTTER includes the inference rules binary resolution, hyperresolution, URresolution, and binary paramodulation. Some of its other abilities are conversion from first-order formulas to clauses, forward and back subsumption, factoring, weighting, answer literals, term ordering, forward and back demodulation, evaluable functions and predicates, and Knuth-Bendix completion. OTTER is coded in C, it is free, and it is portable to many different kinds of computers.

Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes; (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) method, for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing 99Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems.

This report introduces the following programs: kxp: a time-saving LaTeX preprocessor, kxpl: kxp plus latex, kxh: a help facility for kxp and LaTex, ptex: a program for printing a LaTeX document, and pptex: a program for printing parts of a LaTeX document. More detailed descriptions will be given in Part 2: A Reference Manual. The appendix gives instructions on how to use Argonne's Mathematics and Computer Science Division letterhead and intralaboratory memo L(sup A)T(sub E)X styles.

This report presents the results of a survey undertaken to identify and characterize current practices for detecting and locating leaks in district heating systems, particular steam systems. Currently used technology and practices are reviewed. In addition, the survey was used to gather information that may be important for the application of acoustic leak detection. A few examples of attempts to locate leaks in steam and hot water pipes by correlation of acoustic signals generated by the leaks are also discussed.

The Generic TRUEX Model (GTM) was used to design a flowsheet for the TRUEX solvent extraction process that would be used to determine its instrumentation and control requirements. Sensitivity analyses of the key process variables, namely, the aqueous and organic flow rates, feed compositions, and the number of contactor stages, were carried out to assess their impact on the operation of the TRUEX process. Results of these analyses provide a basis for the selection of an instrument and control system and the eventual implementation of a control algorithm. Volume Two of this report is an evaluation of the instruments available for measuring many of the physical parameters. Equations that model the dynamic behavior of the TRUEX process have been generated. These equations can be used to describe the transient or dynamic behavior of the process for a given flowsheet in accordance with the TRUEX model. Further work will be done with the dynamic model to determine how and how quickly the system responds to various perturbations. The use of perturbation analysis early in the design stage will lead to a robust flowsheet, namely, one that will meet all process goals and allow for wide control bounds. The process time delay, …

Dynamic interactions between the vehicle and guideway in a high-speed ground transportation system based on magnetically levitated (maglev) vehicles were studied, with an emphasis on the effects of vehicle and guideway parameters. Two dynamic models for the vehicle are presented. In one model, the vehicle is considered to be a moving force traveling at various speeds on a simply supported single- or two-span beam. In the second model, the vehicle is considered to be one-dimensional and has two degrees of freedom; this model consists of the primary and secondary suspensions of the vehicle, with lumped masses, linear springs, and dampings. The Bernoulli-Euler beam equation is used to model the characteristics of a flexible guideway, and the guideway synthesis is based on modal analysis. Analyses were performed to gain an understanding of response characteristics under various loading conditions and to provide benchmark data for verification of existing comprehensive computer programs and some basic design guidelines for maglev systems. Finally, the German Transrapid maglev system was evaluated.

This report reviews and summarizes the present state of knowledge regarding the effects of the glass surface area/solution volume (SA/V) ratio on the corrosion behavior of borosilicate waste glasses.

The radiolytic yields of hydrogen nitrogen, oxygen, nitrous oxide, and carbon monoxide from two batches of WHC-supplied samples of grouted simulated waste have been (gamma) irradiated at several dose rates (0.025, 0.63 and 130 krad/h for hydrogen and 130 krad/h for all other gases). In one batch, the liquid waste simulant that was added to the grout included the original components that were added to Tank 102-AP (labeled "virgin" waste.) The second batch included a similar liquid waste simulant that was preirradiated to 35 Mrad prior to incorporation into the grout. It is believed that the preirradiated samples more closely represent radioactive waste that was stored in the tank for several years. The lowest dose rate corresponds approximately to that expected in the grout; with the high dose rate, doses equivalent to about 85 years storage in grout vaults were achieved. Most of the results on the batch of virgin samples have been reported recently (Report ANL 93/42). Here we report the results from the batch of preirradiated grout samples and compare the results from the two batches. The radiolytic yields of hydrogen and nitrogen are lower in the preirradiated than in the virgin grout. On the other hand G(oxygen) …

BlockSolve is a software library for solving large, sparse systems of linear equations on massively parallel computers. The matrices must be symmetric, but may have an arbitrary sparsity structure. BlockSolve is a portable package that is compatible with several different message-passing pardigms. This report gives detailed instructions on the use of BlockSolve in applications programs.

This study was to determine the concentration and chemical nature of lead (Pb) aerosols produced during the firing of artillery and to determine the exposures and biological responses of crew members exposed to lead aerosols during such firing. The concentrations of lead-containing aerosols at crew positions depended on wind conditions, with higher concentrations when firing into a head wind. Aerosol concentrations were highest in the muzzle blast zone. Concentrations of lead in the blood of crew members rose during the first 12 days of exposure to elevated airborne lead concentrations and then leveled off. There was no rapid decrease in blood lead concentrations after completion of firing. Small decreases in hematocrit and small increases in free erythrocyte porphyrin were correlated with increasing exposure to airborne lead. These changes were reversed by seven weeks after firing. Changes in nerve conduction velocity had borderline statistical significance to airborne lead exposure. In measuring nerve conduction velocity, differences in skin temperature must be taken into account.

Existing technology for seal systems was reviewed with regard to flange, elastomer, valve, and pump design. A technology data base for the designers of the HWR-NPR coolant system was derived from operating experience and seal development work on reactors in the United States, Canada, and Europe. This data base was then used to generate guidelines for the design of seals and/or joints for the HWR-NPR coolant system. Also discussed are needed additional research and development, as well as the necessary component qualification tests for an effective quality control program.

The Yucca Mountain Project/Spent Fuel program at Argonne National Laboratory is designed to determine radionuclide release rates by exposing high-level waste to repository-relevant groundwater. To gain experience for the tests with spent fuel, a scoping experiment was conducted at room temperature to determine the uranium release rate from an unirradiated uranium dioxide powder mixture (14.3 wt % enrichment in uranium-235) to J-13 water under saturated conditions. Another goal set for the experiment was to develop a method for utilizing isotope dilution techniques to determine whether the dissolution rate of uranium dioxide matrix is in accordance with an existing kinetic model. Results of these analyses revealed unequal uranium dissolution rates from the enriched and depleted portions of the powder mixture because of undisclosed differences between them. Although the presence of this inhomogeneity has precluded the application of the kinetic model, it also provided an opportunity to elaborate on the utilization of isotope dilution data in recognizing and quantifying such conditions. Detailed listings of uranium release and solution chemistry data are presented. Other problems commonly associated with spent fuel, such as the effectiveness of filtering media, the existence of uranium concentration peaks during early stages of the leach tests, the need for …

With the abrupt shutdown of some DOE facilities, a significant volume of in-process material was left in place and still requires treatment for interim storage. Because the systems containing these process streams have deteriorated since shutdown, a portable system for treating the solutions may be useful. A brief survey was made of the DOE complex on the need for a portable treatment system to treat plutonium-bearing solutions. A survey was completed to determine (1) the compositions and volumes of solutions and heels present, (2) the methods that have been used to treat these solutions and heels in the past, and (3) the potential problems that exist in removing and treating these solutions. Based on the surveys and on the Defense Nuclear Facilities Safety Board Recommendation 94-1, design criteria for a portable treatment system were generated.

Deactivation at DOE facilities has left a tremendous amount of contaminated equipment behind. In-situ methods are needed to decontaminate the interiors of the equipment sufficiently to allow either free release or land disposal. A brief survey was completed of the DOE complex on their needs for equipment decontamination with in-situ technology to determine (1) the types of contamination problems within the DOE complex, (2) decontamination processes that are being used or are being developed within the DOE, and (3) the methods that are available to dispose of spent decontamination solutions. In addition, potential sites for using testing decontamination methods were located. Based on the information obtained from these surveys, the Rocky Flats Plants and the Idaho National Engineering Laboratory appear to be best suited complete the initial testing of the decontamination processes.

Annual report of the Argonne National Laboratory Chemical Technology Division (CMT) discussing the group's activities during 1991. These included electrochemical technology; fossil fuel research; hazardous waste research; nuclear waste programs; separation science and technology; integral fast reactor pyrochemical processes; actinite recovery; applied physical chemistry; basic chemistry research; analytical chemistry; research and development; and computer applications.