The minimum possible rotational period of pulsars, which are interpreted as rotating neutron stars, is determined by applying a representative collection of realistic nuclear equations of state. It is found that none of the selected equations of state allows for neutron star rotation at periods below 0.8--0.9 ms. Thus, this work strongly supports the suggestion that if pulsars with shorter rotational periods were found, these are likely to be strange-quark-matter stars. The conclusion that the confined hadronic phase of nucleons and nuclei is only metastable would then be almost inescapable, and the plausible ground-state in that event is the deconfined phase of (3-flavor) strange-quark-matter.

Results on the dynamics and stability of thin films are summarized on the following topics: forced dryout, film instabilities on a horizontal plane and on inclined planes, instrumentation, coating flows, and droplet spreading. (DLC)

This document describes the Westinghouse Savannah River Company's (WSRC) Quality Assurance Program for Defense Waste Processing at the Savannah River Site (SRS). It identifies and describes the planned activities that constitute the required Quality Assurance Program. The work to which the Quality Assurance Program applies includes both the qualification and production of high-level waste forms. The end result of the program is to provide confidence that these high-level waste forms may be safely and acceptably used to dispose of the radioactive waste that results from activities at SRS in support of national defense.

On January 24, 1992, while pressure testing saltwell line SL-119 in the 241-S Tank Farm, water was observed spraying out of heat trace enclosure. The SL-115, SL-116, SN-215, and SN-216 saltwell lines also recently failed pressure testing because of leaks. This study documents the pertinent facts about the SL-119 line and discusses the cause of the failures. The inspection of the SL-119 failure revealed two through-the-wall holes in the top center of the pipeline. The inspection also strongly suggests that the heat tracing system is directly responsible for causing the SL-119 failure. Poor design of the heat tracing system allowed water to enter, condense, and collect in the electric metallic tubing (EMT) carbon steel conduits. Water flowed to the bottom of the elbow of the conduit and corroded out the elbow. The design also allowed drifting desert sand to enter into the conduit and fall to the bottom (elbow) of the conduit. The sand became wet and aided in the corrosion of the elbow of the conduit. After the EMT conduits corroded though, the water dripped from the corroded ends of the EMT conduits onto the top of the saltwell pipe, corroding the two holes into the top of the …

This document describes the Westinghouse Savannah River Company`s (WSRC) Quality Assurance Program for Defense Waste Processing at the Savannah River Site (SRS). It identifies and describes the planned activities that constitute the required Quality Assurance Program. The work to which the Quality Assurance Program applies includes both the qualification and production of high-level waste forms. The end result of the program is to provide confidence that these high-level waste forms may be safely and acceptably used to dispose of the radioactive waste that results from activities at SRS in support of national defense.

This is the final report of the Southeast Regional Experiment Station project. The Florida Solar Energy Center (FSEC), a research institute of the University of Central Florida (UCF), has operated the Southeast Regional Experiment Station (SE RES) for the US Department of Energy (DOE) since September 1982. Sandia National Laboratories, Albuquerque (SNLA) provides technical program direction for both the SE RES and the Southwest Regional Experiment Station (SW RES) located at the Southwest Technology Development Institute at Las Cruces, New Mexico. This cooperative effort serves a critical role in the national photovoltaic program by conducting system evaluations, design assistance and technology transfer to enhance the cost-effective utilization and development of photovoltaic technology. Initially, the research focus of the SE RES program centered on utility-connected PV systems and associated issues. In 1987, the SE RES began evaluating amorphous silicon (a-Si) thin-film PV modules for application in utility-interactive systems. Stand-alone PV systems began receiving increased emphasis at the SE RES in 1986. Research projects were initiated that involved evaluation of vaccine refrigeration, water pumping and other stand-alone power systems. The results of this work have led to design optimization techniques and procedures for the sizing and modeling of PV water pumping systems. …

The minimum possible rotational period of pulsars, which are interpreted as rotating neutron stars, is determined by applying a representative collection of realistic nuclear equations of state. It is found that none of the selected equations of state allows for neutron star rotation at periods below 0.8--0.9 ms. Thus, this work strongly supports the suggestion that if pulsars with shorter rotational periods were found, these are likely to be strange-quark-matter stars. The conclusion that the confined hadronic phase of nucleons and nuclei is only metastable would then be almost inescapable, and the plausible ground-state in that event is the deconfined phase of (3-flavor) strange-quark-matter.

None

Key component in the CDA instrument is the differential capacitive force sensor. The CDA instrument has four basic components: OEM analytical balance, flexure point and capacitor plates, gas confinement tower and high-voltage bias electrodes, and the furnace. Phyton is in position to purchase an OEM analytical balance; negotations are underway for obtaining the feedback control circuitry for the differential capacitive force sensor. Progress with the differential capacitive force sensor is reviewed.

Results on the dynamics and stability of thin films are summarized on the following topics: forced dryout, film instabilities on a horizontal plane and on inclined planes, instrumentation, coating flows, and droplet spreading. (DLC)

The purpose of the Mark 22 Flow Excursion Follow-On testing was to investigate the theory that approximately 15% of the flow bypassed the primary flow channels in previous testing, whereas the design called for only a 3% bypass. The results of the follow-on tests clearly confirmed this theory. The testing was performed in two phases. During the first phase, characterization tests performed during the earlier test program were repeated.

Energy-dependent photoelectron diffraction (EDPD) has been used to determine the surface structure of a surface alloy. Direct imaging has been achieved by Fourier transformation of experimental energy-dependent photoelectron diffraction data. This holographic method, based upon the intersection of contour arcs associated with each measurement direction, can provide vectorial atomic positions with atomic resolution. Experimental analysis is supported by Fourier transformation of simulations from multiple scattering calculations. The surface geometry of c(2x2) Au/Cu(001) has been imaged in an elementally-specific manner, with clear, non-model-dependent discrimination of the surface alloy over the overlayer structure.

The left-right cross section asymmetry for Z boson production in e{sup +} e{sup {minus}} annihilation (A{sub LR}) is being measured at E{sub cm} 91.5 GeV with the SLD detector at the SLAC Linear Collider (SLC) using a longitudinally polarized electron beam. The electron polarization is continually monitored with a Compton scattering polarimeter, and is typically 22%. At the current time, we have accumulated a sample of 4779 Z events. We find that A{sub LR} = 0.02 {double_bond} 0.07 {doteq} 0.001 where the first error is statistical and the second is systematic. Using this very preliminary measurement, we determine the weak mixing angle defined at the Z boson pole to be sin{sup 2}{sub W}{sup olept} = 0.247 {plus_minus} 0.009.

This work provides a brief overview of past and ongoing efforts at Lawrence Livermore National Laboratory (LLNL) in the area of finite-element modeling of crash and impact problems. The process has been one of evolution in several respects. One aspect of the evolution has been the continual upgrading and refinement of the DYNA, NIKE, and TOPAZ family of finite-element codes. The major missions of these codes involve problems where the dominant factors are high-rate dynamics, quasi-statics, and heat transfer, respectively. However, analysis of a total event, whether it be a shipping container drop or an automobile/barrier collision, may require use or coupling or two or more of these codes. Along with refinements in speed, contact capability, and element technology, material model complexity continues to evolve as more detail is demanded from the analyses. A more recent evolution has involved the mix of problems addressed at LLNL and the direction of the technology thrusts. A pronounced increase in collaborative efforts with the civilian and private sector has resulted in a mix of complex problems involving synergism between weapons applications (shipping container, earth penetrator, missile carrier, ship hull damage) and a more broad base of problems such as vehicle impacts as discussed …

The generalized perturbation method, commonly used in connection with the band energy contribution to the energy of a solid to approximate the total energy of an ordered configuration of an alloy, is reformulated with respect to total energy. The connection of the results derived here to those obtained based on the band energy is pointed out, and possible applications of the method is discussed.

Coal solubilization under aerobic conditions results in oxygenated coal product which, in turn, makes the coal poorer fuel than the starting material. A novel approach has been made in this project is to remove oxygen from coal by reductive decarboxylation. In Wyodak subbituminous coal the major oxygen functionality is carboxylic groups which exist predominantly as carboxylate anions strongly chelating metal cations like Ca{sup 2+} and forming strong macromolecular crosslinks which contribute in large measure to network polymer structure. Removal of the carboxylic groups at ambient temperature by anaerobic organisms would unravel the macromoleculer network, resulting in smaller coal macromolecules with increased H/C ratio which has better fuel value and better processing prospects. These studies described here sought to find biological methods to remove carboxylic functionalities from low rank coals under ambient conditions and to assess the properties of these modified coals towards coal liquefaction. Efforts were made to establish anaerobic microbial consortia having decarboxylating ability, decarboxylate coal with the adapted microbial consortia, isolate the organisms, and characterize the biotreated coal products. Production of CO{sup 2} was used as the primary indicator for possible coal decarboxylation.

The purpose of the Mark 22 Flow Excursion Follow-On testing was to investigate the theory that approximately 15% of the flow bypassed the primary flow channels in previous testing, whereas the design called for only a 3% bypass. The results of the follow-on tests clearly confirmed this theory. The testing was performed in two phases. During the first phase, characterization tests performed during the earlier test program were repeated.

The left-right cross section asymmetry for Z boson production in e[sup +] e[sup [minus]] annihilation (A[sub LR]) is being measured at E[sub cm] 91.5 GeV with the SLD detector at the SLAC Linear Collider (SLC) using a longitudinally polarized electron beam. The electron polarization is continually monitored with a Compton scattering polarimeter, and is typically 22%. At the current time, we have accumulated a sample of 4779 Z events. We find that A[sub LR] = 0.02 [double bond] 0.07 [doteq] 0.001 where the first error is statistical and the second is systematic. Using this very preliminary measurement, we determine the weak mixing angle defined at the Z boson pole to be sin[sup 2][sub W][sup olept] = 0.247 [plus minus] 0.009.

Computer networks, supporting an organization's activities, are prevalent and very important to the organization's mission. Implementing a heterogenous organizational network allows the staff to select the computing environment that best supports their job requirements. This paper outlines the lessons learned implementing a heterogenous computer network based on networking standards such as TCP/IP and Ethernet. Such a network is a viable alternative to a proprietary, vendor supported network and can provide all the functionality customers expect in a computer network. 2 figs.

None

None

The purpose of this panel is to present different perspectives and opinions regarding the issues surrounding why software should or shouldn't be entrusted with critical (high consequence) functionality.

High gain photoconductive semiconductor switches (PCSS) are being used to produce high power electromagnetic pulses foc (1) compact, repetitive accelerators, (2) ultra-wide band impulse sources, (3) precision gas switch triggers, (4) optically-activated firesets, and (5) high power optical pulse generation and control. High power, sub-nanosecond optical pulses are used for active optical sensors such as compact optical radars and range-gated hallistic imaging systems. Following a brief introduction to high gain PCSS and its general applications, this paper will focus on PCSS for optical pulse generation and control. PCSS technology can be employed in three distinct approaches to optical pulse generation and control: (1) short pulse carrier injection to induce gain-switching in semiconductor lasers, (2) electro-optical Q-switching, and (3) optically activated Q-switching. The most significant PCSS issues for these applications are switch rise time, jitter, and longevity. This paper will describe both the requirements of these applications and the most recent results from PCSS technology. Experiments to understand and expand the limitations of high gain PCSS will also be described.

The Waste Isolation Pilot Plant (WIPP) is the first nuclear waste repository certified by the United States Environmental Protection Agency. Success in regulatory compliance resulted from an excellent natural setting for such a repository, a facility with multiple, redundant safety systems, and from a rigorous, transparent scientific and technical evaluation. The WIPP story, which has evolved over the past 25 years, has generated a library of publications and analyses. Details of the multifaceted program are contained in the cited references. Selected geotechnical highlights prove the eminent suitability of the WIPP to serve its congressionally mandated purpose.