The authors present an improved comparison of the strong couplings of gluons to light (u, d, and s), c, and b quarks, determined from multijet rates in flavor-tagged samples of hadronic Z{sup 0} decays recorded with the SLC Large Detector at the SLAC Linear Collider between 1993 and 1995. Flavor separation on the basis of lifetime and decay multiplicity differences among hadrons containing light, c, and b quarks was made using the SLD precision tracking system, yielding tags with high purity and low bias against {ge} 3-jet final states. They find: {alpha}{sub s}{sup uds}/{alpha}{sub s}{sup all} = 0.997 {+-} 0.011(stat) {+-} 0.011(syst) {+-} 0.005(theory), {alpha}{sub s}{sup c}/{alpha}{sub s}{sup all} = 0.984 {+-} 0.042 {+-} 0.053 {+-} 0.022, {alpha}{sub s}{sup b}/{alpha}{sub s}{sup all} = 1.022 {+-} 0.019 {+-} 0.023 {+-} 0.012.

The authors have measured production rates as a function of momentum of the identified hadrons {pi}{sup +}, K{sup +}, K{sup 0}, K*{sup 0}, {phi}, p, {Lambda}{sup 0} and their antihadrons in inclusive hadronic Z{sup 0} decays, as well as separately in decays into light, c and b flavors. In addition they have compared hadron and antihadron production rates in light quark (rather than antiquark) jets. The SLD Cherenkov Ring Imaging Detector was used to identify charged hadrons. The vertex detector was used to tag high-purity samples of light- and b-flavor events. The electron beam polarization was used to tag samples of quark and antiquark jets. Clear flavor dependences are observed, consistent with expectations based upon measured production and decay properties of heavy hadrons. They use the light-flavor results to test the predictions of MLLA QCD and of various fragmentation models. Differences between hadron and antihadron production in light quark jets are observed at high momentum fraction, providing direct evidence that higher-momentum particles are more likely to contain a primary quark or antiquark, and they use these results to make a new direct measurement of strangeness suppression in the jet fragmentation process.

Newsletter distributed to the Low-Level Radioactive Waste Forum members describing current news, policies, and legislation, as well as other information relevant to the management of low-level radioactive waste.

Newsletter distributed to the Low-Level Radioactive Waste Forum members describing current news, policies, and legislation, as well as other information relevant to the management of low-level radioactive waste.

Newsletter distributed to the Low-Level Radioactive Waste Forum members describing current news, policies, and legislation, as well as other information relevant to the management of low-level radioactive waste.

Newsletter distributed to the Low-Level Radioactive Waste Forum members describing current news, policies, and legislation, as well as other information relevant to the management of low-level radioactive waste.

The U.S. Department of Energy/Morgantown Energy Technology Center (DOE/METC) awarded a contract in 1991 to Prime Energy Corporation (PEC) to demonstrate the benefit of using horizontal wells to recover gas from low permeability formations. The project area was located in the Chittim field of Maverick County, Texas. The Lower Glen Rose Formation in the Chittim field was a promising horizontal well candidate based on the heterogenous nature of the reservoir (suggested by large well-to-well variances in reserves) and the low percentage of economical vertical wells. Since there was substantial evidence of reservoir heterogeneity, it was unknown whether the selected, wellsite would penetrate a reservoir with the desired properties for a horizontal well. Thus, an integrated team was formed to combine geologic analysis, seismic interpretation, reservoir engineering, reservoir simulation, and economic assessment to analyze the production potential and profitability of completing a horizontal well in the Lower Glen Rose formation.

Tritium technology in the United States has advanced considerably since the 1988 Tritium Conferences in Toronto. This advance has come in facilities, processing and safety related technologies and in an ever increasing commitment to compliance related issues. The major laboratories in the US tritium programs continue to be (Westinghouse) Savannah River Site, EG G Mound, Lawrence Livermore National Laboratory, Sandia National Laboratory and the Los Alamos National Laboratory. Each of these Laboratories have made some significant changes in their programs and/or facilities in the past four years. 11 refs, 1 fig.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the first six months of 1992 on research activities associated with these two systems. (GHH)

The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the first six months of 1992 on research activities associated with these two systems. (GHH)

This annual report is in fulfillment of contract obligations with Bonneville Power Administration which is the funding source for the Oregon Department of Fish and Wildlife's Umatilla Basin Habitat Improvement Project. The major activities undertaken during this report period were: procurement of 17 cooperative lease agreements with private landowners, design and layout of 8.6 miles of riparian exclosure fence and 3.0 miles of instream structures, development of five fencing contracts and six instream work contracts. Results include implementation of 10 miles of fencing and 3 miles of instream work. Other activities undertaken during this report period are: data collection from 90 habitat monitoring transects, collection and summarization of temperature data, photopoint establishment, coordination with numerous agencies and tribes and education of all age groups on habitat improvement and protection. 4 refs., 4 figs., 6 tabs.

The authors have measured production fractions and spectra for {pi}{sup {+-}}, K{sup {+-}} and p, and production spectra for K{sup 0} and {Lambda}{sup 0} in both hadronic Z{sup 0} decays and a Z{sup 0} {yields} light quark (uds) subset at SLD. The SLD Cherenkov Ring Imaging Detector was used to identify charged hadrons. The CCD vertex detector was used to select the enriched uds sample. For the global sample, the results are consistent with previous experiments. The authors observe a clear flavor dependence in production spectra, but only a small effect in hadron fractions and {xi} = ln(1/x{sub p}) peak positions.

Burlington Bottoms, consisting of approximately 417 acres of riparian and wetland habitat, was purchased by the Bonneville Power Administration in November 1991. The site is located approximately 1/2 mile north of the Sauvie Island Bridge (T2N R1W Sections 20, 21), and is bound on the east side by Multnomah Channel and on the west side by the Burlington Northern Railroad right-of-way and U.S. Highway 30 (Figures 1 and 2). Wildlife habitat values resulting from the purchase of this site will contribute toward the goal of mitigating for habitat lost as outlined in the Columbia and Willamette River Basin's Fish and Wildlife Program and Amendments. Under this Program, mitigation goals were developed as a result of the loss of wildlife habitat due to the development and operation of Federal hydro-electric facilities in the Columbia and Willamette River Basins. In 1993, an interdisciplinary team was formed to develop and implement quantitative Habitat Evaluation Procedures (HEP) to document the value of various habitats at Burlington Bottoms. Results of the HEP will be used to: (1) determine the current status and habitat enhancement potential of the site consistent with wildlife mitigation goals and objectives; and (2) develop a management plan for the area. HEP …

The Willow Creek site is one of the most significant remaining areas of typical native Willamette Valley habitats, with a variety of wetlands, grasslands, and woodlands. A diverse array of native flora and fauna, with significant wildlife habitats, is present on the site. Wildlife diversity is high, and includes species of mammals, songbirds, raptors, reptiles, amphibians, and one rare invertebrate. Over 200 species of native plants have been identified (including populations of six rare, threatened, or endangered species), along with significant remnants of native plant communities. Willow Creek is located in Lane County, Oregon, on the western edge of the City of Eugene (see Figure 1). The city limit of Eugene passes through the site, and the site is entirely within the Eugene Urban Growth Boundary (UGB). At present, only lands to the east and northeast of the site are developed to full urban densities. Low density rural residential and agricultural land uses predominate on lands to the northwest and south. A partially completed light industrial/research office park is located to the northwest. Several informal trails lead south from West 18th at various points into the site. The area encompasses a total of approximately 349 acres under several ownerships, in …

Concern over the future availability of high quality liquid fuels or use in furnaces and boilers prompted the U. S. Department of Energy (DOE) to consider alternate fuels as replacements for the high grade liquid fuels used in the 1970`s and 1980`s. Alternate fuels were defined to be combinations of a large percentage of viscous, low volatility fuels resulting from the low end of distillation mixed with a small percentage of relatively low viscosity, high volatility fuels yielded by the high end of distillation. The addition of high volatility fuels was meant to promote desirable characteristics to a fuel that would otherwise be difficult to atomize and burn and whose combustion would yield a high amount of pollutants. Several questions thus needed to be answered before alternate fuels became commercially viable. These questions were related to fuel atomization, evaporation, ignition, combustion and pollutant formation. This final report describes the results of the most significant studies on ignition and combustion of alternative fuels.

The entry rate of {sup 22}Rn into a basement structure was measured continuously. These measurements demonstrated that radon entry did not vanish even when the structure was slightly pressurized. This persistent entry has been determined to be dominated by diffusion through the floor and walls and a combination of diffusion and convection through the floor-wall joint. The highest indoor radon concentrations occurred during calm periods when the pressure differentials between the inside and outside of the structure were small. The objectives of this work were to identify the origins of the radon and investigate the entry pathways. The radon could originate either in the concrete or in the soil surrounding the structure. Entry pathways into the basement were through the concrete floor and walls as well as through the floor-wall joint. The contributions of the origins and entry pathways were determined by continuously measuring the radon entry rate into the basement, using a trace gas system, and the flux density through portions of the floor and walls. Radon entry through the floor-wall joint could be controlled using a baseboard barrier system. Results indicated that, during calm conditions with wind speeds less than 1 m s{sup {minus}1}, 25 % of the …

A large component of radon entry cannot be explained by pressure differences between the soil and inside the structures. The persistence of this radon entry even when the house is pressurized by 1 Pa indicates that it must be due to molecular diffusion. The radon entry rate as measured by accumulators below ground level (soil + concrete) is roughly 2 times greater than that measured above ground level (concrete alone). The soil permeability is about 10{sup {minus}12} m{sup 2} and does not change dramatically with depth down to 2 m. The diffusion component of radon entry is reduced by about 30% when the floor wall joint is sealed. The Rn3D model is operating on our computer system and is being modified to accommodate the geometrical configurations of the underground test structure.

The SLD upgrade CCD vertex detector (VXD3) is described. Its 307 million pixels are assembled from 96 3.2 Mpixel CCDs of 13 cm{sup 2} each. The system has evolved from the pioneering CCD vertex detector VXD2, which has operated in SLD since 1992. The CCDs of VXD3 are mounted on beryllium ladders in three cylinders, providing three space point measurements along each track of about 5 microns resolution in all three co-ordinates. Significant improvements are achieved with VXD3 in impact parameter resolution (about a factor of two) and acceptance ({approximately}20%) through optimized geometry and reduced material. New readout electronics have been developed for this system.