The authors have measured production fractions and spectra for {pi}{sup {+-}}, K{sup {+-}} and p, and production spectra for K{sup 0} and {Lambda}{sup 0} in both hadronic Z{sup 0} decays and a Z{sup 0} {yields} light quark (uds) subset at SLD. The SLD Cherenkov Ring Imaging Detector was used to identify charged hadrons. The CCD vertex detector was used to select the enriched uds sample. For the global sample, the results are consistent with previous experiments. The authors observe a clear flavor dependence in production spectra, but only a small effect in hadron fractions and {xi} = ln(1/x{sub p}) peak positions.

Burlington Bottoms, consisting of approximately 417 acres of riparian and wetland habitat, was purchased by the Bonneville Power Administration in November 1991. The site is located approximately 1/2 mile north of the Sauvie Island Bridge (T2N R1W Sections 20, 21), and is bound on the east side by Multnomah Channel and on the west side by the Burlington Northern Railroad right-of-way and U.S. Highway 30 (Figures 1 and 2). Wildlife habitat values resulting from the purchase of this site will contribute toward the goal of mitigating for habitat lost as outlined in the Columbia and Willamette River Basin's Fish and Wildlife Program and Amendments. Under this Program, mitigation goals were developed as a result of the loss of wildlife habitat due to the development and operation of Federal hydro-electric facilities in the Columbia and Willamette River Basins. In 1993, an interdisciplinary team was formed to develop and implement quantitative Habitat Evaluation Procedures (HEP) to document the value of various habitats at Burlington Bottoms. Results of the HEP will be used to: (1) determine the current status and habitat enhancement potential of the site consistent with wildlife mitigation goals and objectives; and (2) develop a management plan for the area. HEP …

The entry rate of {sup 22}Rn into a basement structure was measured continuously. These measurements demonstrated that radon entry did not vanish even when the structure was slightly pressurized. This persistent entry has been determined to be dominated by diffusion through the floor and walls and a combination of diffusion and convection through the floor-wall joint. The highest indoor radon concentrations occurred during calm periods when the pressure differentials between the inside and outside of the structure were small. The objectives of this work were to identify the origins of the radon and investigate the entry pathways. The radon could originate either in the concrete or in the soil surrounding the structure. Entry pathways into the basement were through the concrete floor and walls as well as through the floor-wall joint. The contributions of the origins and entry pathways were determined by continuously measuring the radon entry rate into the basement, using a trace gas system, and the flux density through portions of the floor and walls. Radon entry through the floor-wall joint could be controlled using a baseboard barrier system. Results indicated that, during calm conditions with wind speeds less than 1 m s{sup {minus}1}, 25 % of the …

The objective of this Class III project is to demonstrate that detailed reservoir characterization of slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico is a cost-effective way to recover a higher percentage of the original oil in place through geologically based field development. The project focused on reservoir characterization of the East Ford unit, a representative Delaware Mountain Group field that produces from the upper Bell Canyon Formation (Ramsey Sandstone). The field, discovered in 1960, is operated by Oral Petco, Inc., as the East Ford unit: it contained an estimated 18.4 million barrels (MMbbl) of original oil in place.

The design of a fiber optic communication network for monitoring and control in power systems is discussed. It is shown that by appropriate choice of protocols, a fault-tolerant system can be built that operates in any arbitrary configuration. Since the network is based on fiber optics, it can be made fast enough for substation monitoring and control. In this application, a relatively small number of cables is required to implement a high reliability system. The network can also be used for distribution automation. In this application the network is required to reach all parts of the power system, and the fiber cable itself becomes a significant fraction of the cost of communications. However, since many applications can be supported at once, the cost per function can be reasonable.

A fully-parameterized model for the formation and growth of aerosols via gas-to-particle conversion has been developed and tested. A particularly significant contribution is a new method for the prediction of numbers of particles nucleated using information on the vapor source rate, relative humidity, and preexisting aerosol alone, thus eliminating the need to solve a system of coupled ODEs. Preliminary tests indicate substantial reduction in computational costs, but it is recommended that the BIMODAM model be incorporated into a large-scale model of the sulfur cycle in order to more fully test its computational feasibility.

With the completion of the experimental runs with the DLS, which included both heavy ion and nucleon projectiles and targets, is being completed the analysis of these high statistics experiments. The Hopkins group has a major responsibility in comparing the experimental results with recently developed simulation codes for a theoretical comparison. The second major activity involves the STAR experiment at RHIC, to continued involvement with simulations and development of prototypes of detector systems is expected. The program for studying optical properties of mirrors and gas scintillations related to Cerenkov ring imaging will continue.

The project objective is to explore the generation of soft X-ray laser radiation in a plasma column created by a fast capillary discharge. The proposed capillary lasing scheme offers the potential for compact, simple and efficient soft X-ray laser sources. For this purpose a compact, fast pulse generator which produces 100 kA current pulses with a risetime of 11 ns was constructed. Initial experiments were conducted in evacuated capillaries, in which the plasma is produced by ablation of the capillary walls. The soft X-ray emission from discharges in polyethylene capillary channels was studied to investigate the possibility of amplification in the 3-2 transition of C VI, at {lambda} = 18.2 nm. Time-resolved spectra in which this transition appears anomalously intense with respect to the 4--2 transition of the same ion were obtained. To date, however, this phenomenoa could not be confirmed as gain, as the intensity of the 18.2 nm line has not been observed to increase exponentially as a function of the capillary length. Encouraging results were obtained by fast pulse discharge excitation of capillaries filled with preionized gas. High temperature (Te > 150 eV), small diameter ({approximately}200 {mu}m) plasma columns were efficiently generated. Fast current pulse excitation of …

The project objective is to explore the generation of soft X-ray laser radiation in a plasma column created by a fast capillary discharge. The proposed capillary lasing scheme offers the potential for compact, simple and efficient soft X-ray laser sources. For this purpose a compact, fast pulse generator which produces 100 kA current pulses with a risetime of 11 ns was constructed. Initial experiments were conducted in evacuated capillaries, in which the plasma is produced by ablation of the capillary walls. The soft X-ray emission from discharges in polyethylene capillary channels was studied to investigate the possibility of amplification in the 3-2 transition of C VI, at {lambda} = 18.2 nm. Time-resolved spectra in which this transition appears anomalously intense with respect to the 4--2 transition of the same ion were obtained. To date, however, this phenomenoa could not be confirmed as gain, as the intensity of the 18.2 nm line has not been observed to increase exponentially as a function of the capillary length. Encouraging results were obtained by fast pulse discharge excitation of capillaries filled with preionized gas. High temperature (Te > 150 eV), small diameter ({approximately}200 {mu}m) plasma columns were efficiently generated. Fast current pulse excitation of …

The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation. (VC)

The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation. (VC)

This progress report describes gains made in three projects entitled (1) 3-Dimensional nuclear topography of genes and chromosomes in interphase nuclei, (2) Sequence specific identification and perturbation of the genomic DNA in living cells by nonionic oligonucleotide analogs (Matagen), and Resolution and isolation of specific DNA restriction fragments.(DT)

This progress report describes gains made in three projects entitled (1) 3-Dimensional nuclear topography of genes and chromosomes in interphase nuclei, (2) Sequence specific identification and perturbation of the genomic DNA in living cells by nonionic oligonucleotide analogs (Matagen), and Resolution and isolation of specific DNA restriction fragments.(DT)

Monthly publication containing statistical data at state, census division, and U.S. levels regarding "net generation by energy source; consumption, stocks, quantity quality and cost of fossil fuels; and capability of new generating units by company and plant" (p. iii).

Fish communities in two upper Little Tennessee River tributaries, Rabbit Creek and Middle Creek, both located in Macon County, North Carolina, were monitored using IBI methods in 1990 and again in 1992. A single site, each on the lower reaches of its respective creek, was chosen to reflect the influence of conditions throughout the watershed and to provide a measure of water quality exiting the watershed. The Rabbit Creek watershed (Holly Springs community) has a long history of settlement and agricultural use. Dominant land uses today are pasture in the bottom lands and residential development at higher elevations. Much of the upper portion of the Middle Creek watershed on the slopes of Scaly Mountain is devoted to cabbage farming, often on steep slopes and highly erodible soils. From the cabbage growing area, the creek drops 400 feet to the lower valley. Other common land uses include residential, livestock, and forest. Both streams are characterized by heavy sedimentation and frequent high turbidity. Both streams showed marked improvement between 1990 and 1992. In 1990, Rabbit Creek`s IBI score was 31.0, for a bioclass rating of ``poor.`` In 1992, the IBI score was 42.1 for a bioclass rating of ``fair.`` For Middle Creek, …